Kihikihi Engineering Auction
NT-50 and BT-40 Mill Tool Holders
Skylarc Ref F142788
Expected Auction End Time: 16th April 2023 8:05pm
NT-50 and BT-40 Mill Tool Holders.
Includes:
- Mexin NT50 Tool holder type 215-50-04.
- Mecin BT40 Tool holder type 160-40-40 with attached 100mm diameter Indexable Milling Cutter of unknown brand/model.
Single Axle Trailer w/Steel Cage & Canvas Cover by Motrax
Skylarc Ref G142789
Expected Auction End Time: 16th April 2023 7:26pm
Single Axle Trailer w/ Steel Cage & Canvas Cover by Motrax
Model No. 6x4
Manufactured in 2014
900kg GVM
220kg Tare
Bed approx 1900x1370mm.
Trailer tow bar approx 1300mm long.
165/70R13 Tyre size.
Rego good till 9/10/23.
WOF good till October 2023.
Workbench with Attached Outdoor Roof Assembly
Skylarc Ref H142790
Expected Auction End Time: 16th April 2023 8:50pm
Workbench with Attached Outdoor Roof Assembly.
Workbench itself measures approx 2400mm long, 1020mm wide, 980mm high to top surface.
Wood Boards surfaces, top surface has galvanised sheet steel covering wood.
Wotkbench includes a bolted on roof assembly, see photos for design details.
Items seen on Workbench in photos are NOT included.
Buyer will need to bring appropriate tools to unbolt roof assembly from wotkbench along with appropriate vehicle/trailer for removal. A forklift will be available to assist in lifting off roof.
Assorted Combination Square Compinents + Assorted Gauge Sets
Skylarc Ref J142792
Expected Auction End Time: 16th April 2023 7:30pm
Assoeted Combination Square Compinents + Assorted Gauge Sets.
More & Wright branded combination square components, missing ruler.
9z assorted gauge sets, see photos for further details on types.
Condition varies greatly with each item.
Mechanics Mobile Tool Cabinet by 1-11
Skylarc Ref L142794
Expected Auction End Time: 16th April 2023 8:54pm
Mechanics Mobile Tool Cabinet.
1-11 branded unit.
Two piece, removable smaller top cabinet measures approx 660x310x435mm.
Lower unit measures 680x460x1005mm and is on castors.
Lower unit locking keys are included. Top unit keys are missing.
Contents seen in photos are included. Most drawers are empty.
4x Vernier Calipers
Skylarc Ref M142795
Expected Auction End Time: 16th April 2023 6:52pm
4x Vernier Calipers.
Includes:
- 1x Mitutoyo 130mm mechanical Caliper, model unknown.
- 1x unknown brand 150mm mechanical Caliper.
- 2x unknown brand digital 150mm Calipers with cases. Both untested as batteries deleted.
Assorted Engineers Steel Set Squares & Rulers
Skylarc Ref O142797
Expected Auction End Time: 16th April 2023 6:45pm
Assorted Engineers Steel Set Squares & Rulers.
7x Stainless steel rulers with longest at 1000mm.
4x set squares, one being a vintqge Moore & Wright brand unit.
Also includes an Angelo branded electronic adjustable angle level, model number unknown.
See photos for further details on included items.
Condition varies with each item.
Assorted Jobber Drill Bits & More
Skylarc Ref R142800
Expected Auction End Time: 16th April 2023 7:53pm
Assorted Jobber Drill Bits & More.
Estimate of approx 100x units, most being Jobber type bits as well as a few long type bits up to 450mm in length.
See photos for further details on included items.
Condition varies greatly with each item.
Heavy Duty Steel Workshop Table w/ Custom Beam Crane Added
Skylarc Ref E142579
Expected Auction End Time: 16th April 2023 8:56pm
Heavy Duty Steel Workshop Table.
3mm steel top surface.
35x35mm box steel frame.
A custom built beam Crane type frame has been added to top of table, see photos. It's seems to partially detach at a point approx 700mm above tabletop.
Other items seen on and around table NOT included.
BOC Gas Welding Torch w/ Regulators & Carry Bucket Kit
Skylarc Ref G142581
Expected Auction End Time: 16th April 2023 8:22pm
BOC Gas Welding Torch w/ Regulators & Carry Bucket Kit.
BOC 5000 Regulators.
LT Welding and cutting Torch.
Includes plastic carry bucket
Items are mostly just dusty from Workshop storage
Assorted Lathe Turning Tools, Cutting Steel & Related Items
Skylarc Ref K142585
Expected Auction End Time: 16th April 2023 8:51pm
Assorted Lathe Turning Tools, Cutting Steel & Related Items.
Various sizes of tuning tools, two Indexable Boring Bars, as well as a 260x260x100mm bin of assorted cutting steel. See photos for further details on included items.
10x Assorted Lathe Tool Holders & Boring Bars
Skylarc Ref M142587
Expected Auction End Time: 16th April 2023 9:26pm
10x Assorted Lathe Tool Holders & Boring Bars.
Includes:
- Sandvik Coromant R166.0FA-2525-16
- Unknown brand type PTJNL-2525M16W
- Unknown brand type PTJNR 2020K 16-W
- Unknown brand type PRCCN2525M12.
- Zeus Knurling Tool 20/8, 25/8,
- Mitsubishi holder UGHN263
- Unknown brand holder
- Unknown brand Boring bar 12x12x150mm.
- Seco Boring Bar S-160-CTFPR11
- Unknown Tool holder 25x20x200mm.
Condition varies with each item.
5x Assorted Keyed Drill Chucks
Skylarc Ref N142588
Expected Auction End Time: 16th April 2023 9:54pm
5x Assorted Keyed Drill Chucks.
Includes:
- Golden Goose 13mm Chuck model JT6 with Morse Taper No.3 Shank.
- Niraw 16mm chuck model B16 with Morse Taper No.2 Shank.
- Metabo 8mm Chuck with 20mm diameter straight shank.
- 2x Jacobs Chuck Emgland chucks both model No.30, 8mm capacity, with 20mm diameter straight shanks.
2x Chuck keys included.
Mobile Steel Workshop Table/Shelf Trolley
Skylarc Ref U142595
Expected Auction End Time: 16th April 2023 6:32pm
Mobile Steel Workshop Table/Shelf Trolley.
3mm thick steel sheet top sueface.
MDF board lower shelf.
Mounted on castors.
30x30mm box steel frame.
Items seen on and around trolley are NOT included.
Multi-Level Workshop Table Workbench
Skylarc Ref Y142599
Expected Auction End Time: 16th April 2023 7:07pm
Multi-Level Workshop Table Workbench.
Custom built.
Wood board surfaces.
620mm high mid-level surface for mounting machines, etc.
Small removable add-on shelf unit attached.
See photos for further design details.
Note - Drill Press and other items seen on and around table unit are NOT included.
Workshop Machine Skate Trolley
Skylarc Ref Z142600
Expected Auction End Time: 16th April 2023 8:20pm
Workshop Machine Skate Trolley.
Pad measures 500x235mm and is 90mm above floor.
6x 80mm wide steel rollers underneath.
1000mm long pull handle.
Trolley rolls but rollers would benefit from some lubrication.
Heavy Duty Steel Workbench Table w/ Vice
Skylarc Ref A142601
Expected Auction End Time: 16th April 2023 7:51pm
Heavy Duty Steel Workbench Table w/ Vice.
3mm thick steel plate top surface.
30x30mm box steel frame.
Includes unbranded vice with 155mm wide jaws.
Other items seen on, under, and around Workbench are NOT included.
Assorted Welding Wire & Rods
Skylarc Ref B142602
Expected Auction End Time: 16th April 2023 7:34pm
Assorted Welding Wire & Rods.
One unused 15kg box of CO2 MIG wire AWS ER70S-6, 0.8Mmm diameter.
Includes assorted other types of Welding Wire with no labeling.
One partial unmarked pack.of 1000mm long Welding Rods plus seven partial packs of 300mm to 400mm Rods.
Leftover workshop supply stock.
Assorted Lot of Hand Tools, Accessories, & More
Skylarc Ref E142605
Expected Auction End Time: 16th April 2023 9:32pm
Assorted Lot of Hand Tools, Accessories, & More.
Hammers, Saws, Wrenches, hex keys, Clamps, brushes and more. See photos for further details on included items.
Condition varies greatly with each item.
Workshop Parts Bin Racks w/ Fastening Hardware & More
Skylarc Ref F142606
Expected Auction End Time: 16th April 2023 8:07pm
Workshop Parts Bin Racks w/ Fastening Hardware & More.
Metal rack approx 310x145x285mm.
2x plastic racks each approx 240x140x180mm.
Includes assorted Bolts, Screws, nails and other assorted items in drawers.
Older racks showing wear and use. Some broken drawer handles, etc.
5x Assorted Bandsaw Replacement Blades
Skylarc Ref H142608
Expected Auction End Time: 16th April 2023 6:45pm
5x Assorted Bandsaw Replacement Blades.
Includes:
- 3x loose 25mm wide blades, unknown manufacturer and length.
- 2x Rolls of Rontgen blades, 13mm wide, 30-metre full roll and one partial roll, thickness 0.65mm, teeth size 8
- 1x Roll of Rontegen blade, 13mm wide, partial roll of unknown length remaining, 0.65 thickness, teeth size 14.
- 1x roll of Rontgen blade, partial roll of unknown remaining length, 25mm wide 0.9mm thick, teeth size 10.
Leftover workshop parts stock.
4x Power Tools, Saw, Drills, older models
Skylarc Ref J142610
Expected Auction End Time: 16th April 2023 7:55pm
4x Power Tools, Saw, Drills, older models.
Includes:
- Black & Decket 10mm Keyed Chuck drill, ID label missing. Motor sounds worn.
- Rockwell 184mm Circular Saw model 4500E4. Motor sounds rough.
- G-Force 12V Cordless Drill Model GFPXCD208 with battery and charger. Battery will not charge so drill untested.
- Cobra 14.4V Cordless Drill Model MCCD144VKF with charger, case, and 2x batteries. Batteries will not charge so drill is untested
3x Assorted Pressure Pump Srayers
Skylarc Ref L142612
Expected Auction End Time: 16th April 2023 7:36pm
3x Assorted Pressure Pump Srayers.
Invludes:
- Number 8 5-Litre pressure Sprayer with spray rod.
- Number 8 4-Litre pressure Sprayer with missing spray rod.
- Older model Maxi 6 pressure Sprayer.
Previous contents of tanks is unknown.
3x Colt Power Tools, Drill & Sanders
Skylarc Ref Q142617
Expected Auction End Time: 16th April 2023 6:37pm
3x Colt Power Tools, Drill & Sanders.
Includes the following Colt Power branded Corded Power tools:
- Impact Drill Model CT20271D with case and accessories. Excellent condition showing very minor use.
- Belt Sander model CT2046BS, 75x533mm Belt, included box. Sawdust on tool from use. Dust catcher bag missing.
- Finishing Sander model CT2049FS. Sawdust from use. Dust catcher bag missing.
Cheetah Single Phase 12-Speed Drill Press
Skylarc Ref R142618
Expected Auction End Time: 16th April 2023 6:24pm
Cheetah Single Phase 12-Speed Drill Press.
Model No.M112-4712
Manufactured in 1987
290mm diameter drilling table.
16mm Keyed Chuck with key included.
Condition- Untested as power cord needs replacing before use. Rusty drilling table and Chuck.
Vintqge Britool 1/2" Drive Imperial.Socket Set
Skylarc Ref T142620
Expected Auction End Time: 16th April 2023 7:58pm
Vintqge Britool 1/2" Drive Imperial.Socket Set.
Made in England.
Sterl case measures approx 510x200x60mm.
See photos for details on included components.
Socket sizes from 1/8" to 1 1/4".
NT-50 Tool Holder w/ Indexable Cutter
Skylarc Ref X142624
Expected Auction End Time: 16th April 2023 6:11pm
NT-50 Tool Holder w/ Indexable Cutter.
NT-50 type tool holder. Most ID markings are worn though "A32" can be read.
Unable to find a manufacturer brand label on Cutter. Visible markings on Cutter are "MR" and "MS100T".
See photos for further type details.
50+ Assorted Metal Hand Files
Skylarc Ref E142631
Expected Auction End Time: 16th April 2023 8:51pm
50+ Assorted Metal Hand Files.
Wide variety of types and sizes, many being very small jeweler size files.
Aldo includes some asseorted micro screwdrivers. See photos for further details on included items.
Condition varies greatly with each item.
2x Vintqge Antique Crescent Tool Co Adjustable Wrenches AT118
Skylarc Ref F142632
Expected Auction End Time: 16th April 2023 8:58pm
2x Vintqge Antique Crescent Tool Co Adjustable Wrenches.
Both are 18" Size, model No. AT118.
Made in Jamestown, New York, USA.
Both function normally and in very good condition for their apparent age.
Custom Made Rotary Grinder
Skylarc Ref N142640
Expected Auction End Time: 16th April 2023 7:15pm
Rotary grinding machine
Believed to be made for grinding large round blades
Consists of a tool cutter/grinder assembly
Rotating assembly with right angle drive
Coolant pump
Max diameter approx 500mm
On wheels
Black & Decker 18V Cordless Drill Driver w/ Charger & 2x Batteries
Skylarc Ref H142634
Expected Auction End Time: 16th April 2023 8:18pm
Black & Decker 18V Cordless Drill Driver.
Model No.ASL186-XE.
Includes battery charger.
Includes 2x Lithium Ion 18V, 1.3Ah, 23.4Wh batteries model BL1318
Includes original box
Drill shows generally mild usage.
Battery reliability.not tested.
Jones and Shipman Cylindrical Grinder
Skylarc Ref W142649
Expected Auction End Time: 16th April 2023 7:04pm
Jones and Shipman Cylindrical Grinder
Unknown model
1100mm x 155mm bed
Internal and external grinding
250mm grinding wheel
Approx 650mm max distance between centers
Power traverse
Assorted grinding wheels
Victor Electric Discharge Machine
Skylarc Ref X142650
Expected Auction End Time: 16th April 2023 9:16pm
Model: Victor JM 322 Spark Eroder
Bed dimensions 600mm x 300mm
Bath dimension 1040mm x 470mm
Three phase
Fitted with 13mm drill chuck
Acu-rite digital read out
Includes a bin with addition electronic modules, see photos.
31x Morse Taper No.1 & No.2 Drills, Assorted Sizes
Skylarc Ref T142646
Expected Auction End Time: 16th April 2023 9:46pm
31x Morse Taper No.1 & No.2 Drills.
Five Drills are No.1 Shanks, diameters from 5/16" to 14mm.
Remaining Drills all have NO.2 size shanks. Diameters from 14.75mm to 19.5mm.
A mix of Imperial and metric Sizes.
Condition varies greatly with each drill. Two Drills appear unused with their plastic cases.
5x Morse Taper No.3 & No.4 Drills
Skylarc Ref U142647
Expected Auction End Time: 16th April 2023 6:08pm
5x Morse Taper Drills.
Includes:
- 1x No.4 shank drill, Dormer brand, 1 49/54" diameter, 200mm cutting length.
- 4x No.3 Shank Drills in sizes 23.5mm, 26.5mm, 27.5mm, 30mm.
Condition varies with each drill.
Assorted Reamer Bits, & More
Skylarc Ref D142656
Expected Auction End Time: 16th April 2023 9:21pm
Assorted Reamer Bits, & More.
60+ items, most appear to be reamers of varying small sizes with largest being 14mm.
Please note that because of time constraints in booking this auction not all cases have been inspected to verify if they hold reamers. Other types of drilling bits may be present.
Condition varies with each unit.
Vintage Antique Thread Tap & Die Set by Wiley & Russell Co
Skylarc Ref E142657
Expected Auction End Time: 16th April 2023 8:25pm
Vintage Antique Thread Tap & Die Set.
Made in Greenfield Massechusetts, USA by Wiley & Russell Mfg Co.
Wood case measures approx 270x115x38mm.
Brass case Hinges.
Unknown if all parts are original.
3x Vintage Thread Tap & Die Sets
Skylarc Ref F142658
Expected Auction End Time: 16th April 2023 8:50pm
3x Vintage Thread Tap & Die Sets.
All sets are incomplete, see photos.
All are in wood cases.
Moorite branded set wood case approx 210x92x33mm.
GTD branded set wood case approx 385x115x35mm.
Set with Mixed Moorite and GTD parts measures approx 360x190x40mm.
2x Keyed Drill Chucks, 16mm.& 6.5mm
Skylarc Ref H142660
Expected Auction End Time: 16th April 2023 8:41pm
2x Keyed Drill Chucks.
Includes:
- 16mm Niraw model B-16 Chuck with Morse Taper No.2 mounting shank.
- 6.5mm Jacobs Chuck England Chuck model.1B with 6mm diameter mounting shank.
Both chucks include keys.
Vintage Inca Woodworking Table & Joiner Saw Bench Set
Skylarc Ref K142663
Expected Auction End Time: 16th April 2023 6:01pm
Vintage Inca Woodworking Table & Joiner Saw Bench Set.
Made in Switzerland by Inca.
Model "SUVA" marked on Table Saw Blade gaurd.
Table Saw Table approx 560x420mm.
180mm diameter Saw Blade.
Joiner Saw Table approx 760mm long, 220mm wide.
Includes thicknesser attachment.
Single Phase Electric motor mounted underneath, see photos.
Includes other assorted attachments/acccesories, see photos.
Auction includes wood Table that the saws and motor are mounted to. Wood Table is approx 970x575x780mm.
Age of items is unknown.
Power plug is cut off.
Guangzhou Three Phase Lathe
Skylarc Ref Q142669
Expected Auction End Time: 16th April 2023 6:08pm
Model: Guangzhou Machine Tool Works C6240B Gap-Bed Lathe
Three phase
Total bed length 1350mm
Distance between centers 1000mm
Swing over bed 200mm
Swing over cross slide 120mm
170mm removable bed gap
Swing over gap 300mm
12 spindle speeds 25-1600rpm
50mm spindle bore
No.4 morse taper tailstock
Quick change tool post (5 holders)
200mm and 250mm three jaw chucks
310mm and 250mm four jaw chucks
Steadies
550mm faceplate
Metric and imperial thread cutting
Three Phase Surface Grinder
Skylarc Ref X142676
Expected Auction End Time: 16th April 2023 9:13pm
Model: PSGS-618
Three phase
460mm x 160mm magnetic chuck
Approx 500mm longitudinal traverse
Approx 180mm cross travel
1.5hp main motor
3300 rpm spindle rpm
Approx 180mm max grinding wheel size
Coolant pump (disconnected)
5x Assorted G-Clamps
Skylarc Ref Y142677
Expected Auction End Time: 16th April 2023 7:08pm
5x Assorted G-Clamps.
Includes:
2x Trojan 200mm, excellent condition.
1x Record 4", missing tip of Threaded rod.
1x Bentall 6", missing turning rod.
1x Global 150mm, missing turning rod and end cap on threaded rod.
Condition varies with each unit.
4x Thread Repair Kits
Skylarc Ref E142683
Expected Auction End Time: 16th April 2023 8:31pm
4x Thread Repair Kits.
Includes:
- Helicoil Thread Repair Kit.
- Recoil kit Part No. 35080, Size M8-1.25
- Recoil kit part No.35100, Size M10-1.5
- Recoil kit part No.35060, Size M6-1
See photos for further details on included items.
9x Assorted Morse Taper No.2 Reamers
Skylarc Ref K142689
Expected Auction End Time: 16th April 2023 9:37pm
9x Assorted Morse Taper No.2 Reamers.
Somta 20 (H7) 3/04
Somta 20 V45
Somta 18 H7
Somta 18 W49
Somta 20 H7 05/13
Unknown brand 18 H7
Remaining reamers have no readable marks but are of approximately similar size to above reamers.
Condition varies with each unit.
Krafft Single Phase 16mm Drill Press
Skylarc Ref L142690
Expected Auction End Time: 16th April 2023 8:51pm
Krafft Single Phase Drill Press.
Model No. 1316B
16mm Keyed Chuck key is included.
12 speeds.
315mm diameter Adjustable height drilling table.
Power cord plug needs replacement, see photo.
Auction includes drill Press only, table that drill Press is on is not included. See our other listings for the table.
Assorted Mill / Lathe Tool Inserts
Skylarc Ref Q142695
Expected Auction End Time: 16th April 2023 8:26pm
Assorted Mill / Lathe Tool Inserts
Brands include Sandvik Coromant, Iscar, Mitsubishi, & More.
Various types/sizes.
Condition varies, some are unused while others show varying usage. Some sets appear mixed
Adjustable Milling Head
Skylarc Ref L140402
Expected Auction End Time: 16th April 2023 6:11pm
Adjustable Milling Head.
Unknown manufacturer and model.
25mm diameter, 105mm long mounting shank.
75mm diameter Adjustable cutting head with 18mm diameter holes for inserting cutting bars.
See photos for further design details.
Comes in non-original wood box.
6-Piece Outside Micrometer Set, 0-150mm range
Skylarc Ref O140405
Expected Auction End Time: 16th April 2023 8:44pm
6-Piece Outside Micrometer Set.
Unknown manufacturer.
0-150mm range.
Wood case 375x190x175mm.
Micrometers in excellent condition. Unused rods show rusting in their sealed plastic wrapping, see photos.
Mitutoyo Depth Gauge Set
Skylarc Ref M142093
Expected Auction End Time: 16th April 2023 8:13pm
Mitutoyo Depth Gauge Set.
Model number label.on case is unreadable.
Made in Japan.
Metric.
Longest accessory rod is approx 230mm in length.
Case exterior shows moderate workshop storage wear. Tools inside are excellent, acccesories still in manufacturer wrapping.
