D.C.Ross
Schmid Copy Milling Machine
Skylarc Ref L117939
Expected Auction End Time: 4th August 2020 8:43pm
Model: Schmid K-25-3
True-trace model 1110 hydraulic copy head
Hydraulic power pack
X axis travel 350mm
Y axis travel 270mm
Z axis travel 200mm
Power feeds on all axis
Variable speed spindle
Table dimensions 1150mm x 326mm
Three phase
Range of accessories
Some manuals
5 x Heavy Duty Stackable Steel Industrial Storage Bins.
Skylarc Ref P117709
Expected Auction End Time: 4th August 2020 9:29pm
5 x Heavy Duty Stackable Steel Industrial Storage Bins.
Raised floor approx 100mm above ground.
Inner storage area depth is approx 300mm, length approx 830mm, width 820mm.
One side has door for dumping materials.
Stackable design.
Condition - Moderate rust on surfaces. Some dented and bent components.
2 x 20FT Shipping Containers and Container Shelter Canopy
Skylarc Ref L117705
Expected Auction End Time: 2nd August 2020 7:45pm
2 x 20FT Shipping Containers and Container Shelter Canopy.
Shipping Container 1: RSSU1078557. Royal Wolf Branded standard 20 foot high cube container.
Condition - Good, no obvious signs of leaks inside, doors open and close fine and floor is structurally stable.
Shipping Container 2: TRHU2815939.
Standard 20 foot high cube container. Condition - Good, again no obvious signs of leaks inside although floor is slightly worse condition than first container see photos.
Container Shelter: Container Shelters NZ Branded.
Dimensions: L 6.05m x W 5.8m x H 2m
Floor Area: 35.09m² (approx)
Note the buyer will need to disassemble.
Industrial Vibratory Conveyor
Skylarc Ref B118267
Expected Auction End Time: 3rd August 2020 6:14pm
BV Polyurethane Industrial Finishing Vibratory Conveyor.
Uras Vibrator.
Model Kee-6-4B.
240V, 50hz, 1.6A, 1395RPM.
Unit has not been tested.
Condition - Unit was stored outside and has moderate surface rusting.
B.V Ultravibe Vibratory Finishing Unit
Skylarc Ref E118270
Expected Auction End Time: 4th August 2020 7:52pm
B.V Ultravibe Vibratory Finishing Unit.
Model BV15DR - BV Ultravibe.
Unit has been stored outside.
Unit has not been tested.
Unable to find exact specifications.
Please see dimensions below to get an idea of capacity.
B.V Ultravibe Vibratory Finishing Unit
Skylarc Ref F118271
Expected Auction End Time: 3rd August 2020 6:09pm
B.V Ultravibe Vibratory Finishing Unit.
Unknown Model - BV Ultravibe.
Unit has been stored outside.
Unit has not been tested.
Unable to find exact specifications.
Please see dimensions below to get an idea of capacity.
Wooden Workbench with Vice
Skylarc Ref A118266
Expected Auction End Time: 2nd August 2020 8:31pm
Wooden Workbench with Vice.
Medium Sized Wooden Workbench.
Comes with attached vice (made in England).
Includes space for a drawer which has been removed.
Condition - This unit has been stored outside and has moderate ware.
Industrial Plate Steel Table (Welding Table)
Skylarc Ref Z118265
Expected Auction End Time: 2nd August 2020 7:21pm
Industrial Plate Steel Table (Welding Table)
Heavy Duty Industrial Steel Plate Tabme with Vice.
30mm Top plate thickness.
Vice will need some refurbishment due to rust etc.
Table has been stored outside and has moderate surface rust.
Set of GenieGrip Mats
Skylarc Ref U118286
Expected Auction End Time: 3rd August 2020 6:48pm
Set of GenieGrip Mats
Specifically designed for exceptional grip and load stability. They are constructed from a carefully selected rubber compound that is incredibly strong, non-marking and oil resistant.
1220mm x 125mm.
B.V Ultravibe Vibratory Finishing Unit
Skylarc Ref D118269
Expected Auction End Time: 2nd August 2020 6:18pm
B.V Ultravibe Vibratory Finishing Unit.
Model BV15DR - BV Ultravibe.
Unit has been stored outside.
Unit has not been tested.
Unable to find exact specifications.
Please see dimensions below to get an idea of capacity.
Assorted Milling Index Units
Skylarc Ref N117733
Expected Auction End Time: 4th August 2020 8:03pm
Assorted Milling Index Units.
Includes index types:
- 2x Seco WCMX06T308-85 740 05506 024.
- 11x Iscar WOGX 4-2-GG, WOGX 08T308-GG, 520M P15-P30/K10-K30.
- 1x Iscar CCMX 3-2-16, CCMX 09T308-16, IC556.
- 8x Iscar Indexes, type number Unknown as ID label is missing from case.
Condition - Cases show oil and grime from workshop storage. Indexes appear unused but cannot verify.
Sandvik Coromant Steel Tool Holder Blank 391.50-95 50 150
Skylarc Ref K117730
Expected Auction End Time: 4th August 2020 6:14pm
Sandvik Coromant Steel Tool Holder Blank.
Type number 391.50-95 50 150.
Also Includes an unmarked tool Holder adapter that measures 61mn dismeter and 97.5mm long. See photos for further details on the two items Included.
60+ Assorted Small End Mills
Skylarc Ref I117728
Expected Auction End Time: 2nd August 2020 9:11pm
60+ Assorted Small End Mills.
Assorted brands.
Includes ball, Taper, finishing, square, corner Rounding, types and more.
Sizes from 1.0mm to 32mm.
Condition - Varies with each unit. Many appear unused, some new in cases.
Lot of Piston Rod Sealed Gas Springs
Skylarc Ref T118285
Expected Auction End Time: 3rd August 2020 8:23pm
Lot of Piston Rod Sealed Gas Springs.
37 Individual Pieces.
Brands including Kaller, Fibro other generic brands.
Various sizes include: 112, 202, powerline x1000, x350 etc.
Please see photos for more details.
60x Assorted Jobber Drill Bits
Skylarc Ref C117722
Expected Auction End Time: 4th August 2020 8:07pm
60x Assorted Jobber Drill Bits.
Assorted brands.
Sizes range from 6.5mm to 18mm.
Some drills are coated, see photos.
Condition varies with each unit, some appear as new while others show varying levels of use.
60+ Assorted Mini End Mills & Drills
Skylarc Ref E117724
Expected Auction End Time: 4th August 2020 8:27pm
60+ Assorted Mini End Mills & Drills.
Assorted brands.
Diameters down to 0.5mm.
See photos for further details on type and Id labels of what is included as it is too much to list in the allowed space.
Most are in original packaging and appear unused. A few are missing packaging, see photos
Caprice Vertical Milling Machine
Skylarc Ref A118682
Expected Auction End Time: 4th August 2020 6:59pm
Model: Caprice MT-949VR
3 phase
3 hp main motor
Morse taper No 3 main spindle
Manufactured 1990
2 speed ranges
70-500 rpm
600 - 4200 rpm
Bed dimensions 1250mm x 230mm
Manual feeds
Sino SDS6-3V Digital read outs
Coolant pump
Fitted with Vertex 150mm vice on rotating table
13mm drill chuck
Large Sheet Metal Decoiler
Skylarc Ref S118674
Expected Auction End Time: 4th August 2020 9:03pm
Heavy duty steel and flattener decoiler
Hydraulic lift arm with feed wheel
Hydraulic width adjustable
Approx 250mm max width
Modernised with vsd drive
Appears to be 5 roller
Machine has been outside for several years
6mm Capacity Sheet Metal Guillotine
Skylarc Ref Z118681
Expected Auction End Time: 3rd August 2020 8:05pm
Model: QC12Y-6 x 3200mm Hydraulic Swing Beam Shear
Max cutting thickness 6mm
Max cutting width 3200mm
Manufactured 2008
Etsun E10 NC controller
Adjustable back gauge
Beam guarding
Foot controller
Super heavy duty machine straight out of work
Iscar ShredMill Indexable Mill Cutter w/ Spare Indexes
Skylarc Ref G117804
Expected Auction End Time: 2nd August 2020 7:37pm
Iscar ShredMill Indexable Mill Cutter w/ Spare Indexes.
Cutter type FRW D064A080-06-27-16.
Includes 35x compatible index units.
Condition - Cutter shows use and wear. A few spare Indexes show some use though most appear unused.
12x Assorted Morse Milling Drill Bits, Metric & Imperial Sizes
Skylarc Ref B117721
Expected Auction End Time: 4th August 2020 8:08pm
12x Assorted Morse Milling Drill Bits, Metric & Imperial Sizes.
Assorted brands.
Includes the following sizes:
- 25mm (coated).
- 22mm (coated).
- 20mm (Coated).
- 15mm
- 21mm
- 21.5mm
- 13.5mm
- 17.5mm
- 23mm
- 24mm
- 25mm
- 41/64"
Condition varies with each drill.
Three Parts Only Fine Blanking Presses
Skylarc Ref V118677
Expected Auction End Time: 3rd August 2020 9:49pm
Two 320 ton and one 250 ton presses
Disassembled for transport and never put back into service
250 ton is known to be damaged
All mid to late 1970s
Includes power cabinets
No Hydraulic power packs
Believed to weigh approx 9 tons each
You will need your own lifting machinery to load these machines
Tesa 150mm Digital Precision Caliper w/ Case
Skylarc Ref A117720
Expected Auction End Time: 4th August 2020 7:36pm
Tesa 150mm Digital Precision Caliper w/ Case.
Made in Switzerland by Tesa.
Includes wood case.
Case exterior shows Workshop wear. Caliper operates notnskky but has not been tested for accuracy.
Assorted Lot of Metal Milling Indexes
Skylarc Ref K117808
Expected Auction End Time: 4th August 2020 9:10pm
Assorted Lot of Metal Milling Indexes.
Includes:
- 5x Kennametal KCPK30.
- 10x Iscar ADKT 150516 R-HM IC328.
- 6x Iscar TRI 16RK-5.25-0.15 IC908.
- 9x Iscar XOMT 060204-HQ IC328.
- 7x Iscar H400 RNHU 1205-AX IC808.
- 2x Iscar H400 RNHU 1205-AX IC830.
- 4x Sandvik Coromant 880-02 02 W05H-P-LM, 4044
- 4x Sandvik Coromant 880-02 02 04H-C-LM, 1044
- 1x Sandvik Coromant 880-05 03 W08H-P-LM, 4044.
- 1x Sandvik Coromant 880-05 03 05H-C-LM, 1044.
- One Iscar case with 7x assorted sizes of small indexes.
Condition - Varies with each unit. Most appear to be unused, a few sern to show some use. All cases show Workshop Storage wear.
2004 Holden Rodeo Double Cab
Skylarc Ref P118671
Expected Auction End Time: 2nd August 2020 7:27pm
2004 Holden Rodeo Double Cab
175619km on clock
2 wheel drive
5 speed manual transmission
Isuzu 4 cylinder 3 litre diesel engine
Air conditioning
Power steering
Tow bar
Drop side flat deck
1810mm long x 1800mm wide
180mm tall sides
Tyres approx 75% all round
New catalytic converter
Damage to doors on passenger side
No current wof
Starts and runs well
Good basic ute with the scrapes and dings expected for a vehicle of this age.
Sandvik Coromant Indexable Mill Cutter R390-032A32-17M
Skylarc Ref J117807
Expected Auction End Time: 4th August 2020 9:45pm
Sandvik Coromant Indexable Mill Cutter R390-032A32-17M.
Includes Torx driver, tube of Molykote 1000, and box.
Condition - Cutter shows wear and use. Appears to have been narrowed by a lathe, see photos.
2 x Replacement Vibratory Tumbler Bowls
Skylarc Ref C118268
Expected Auction End Time: 3rd August 2020 9:24pm
2 x Replacement Vibratory Tumbler Bowls.
2 x B.V Branded Replacement Vibratory Rock Tumbler Bowls.
No indications on the exact size of these bowls but each individual bowl have approximate dimensions of 1400mm x 1400mm x 700mm.
Note these have been stored outside.
2x Sandvik Coromant Indexable Mill Cutters
Skylarc Ref H117805
Expected Auction End Time: 3rd August 2020 7:28pm
2x Sandvik Coromant Indexable Mill Cutters.
Includes:
- Cutter type 32D3R115A32-SSP12.
- 8x spare Indexes for above Cutter, index type SCMT 12 04 08-UR 4225.
- Cutter type R215.64-36A32-6012.
Condition - Cutters show some usage and wear. Spare Indexes appear unused.
Kennametal Indexible Mill Cutter w/ Spare Indexes
Skylarc Ref F117803
Expected Auction End Time: 3rd August 2020 9:53pm
Kennametal Indexible Mill Cutter w/ Spare Indexes.
Unknown cutter type number as shank has been modified and Id markings removed in the process, see photos.
Includes a total of 12x Indexes in types EDPT180516PDSRGE (1x index) , EDPT180516PDSRGD (3x Indexes), EDPT180508PDERGD (3x Indexes), and EDPT180532PDERGD (5x Indexes).
Iscar Indexible Mill Face Cutter w/ Spare Indexes
Skylarc Ref D117801
Expected Auction End Time: 4th August 2020 8:50pm
Iscar Indexible Mill Face Cutter w/ Spare Indexes.
Cutter type H490 F90AX D063-4-27-17.
Includes 8x extra indexes type H490 ANKX-170608PNTR IC830.
Condition - Cutter shows use and wear. Indexes are unused, index case shows Workshop Storage wear.
3x Assorted Kennametal Modular Indexible Mill Drill Bodies
Skylarc Ref R117399
Expected Auction End Time: 4th August 2020 9:32pm
3x Assorted Kennametal Modular Indexible Mill Drill Bodies.
Includes:
- KTIP 095R8SS10M, 8XD, 9.5mm dia.
- KTIP 135R5SS14M, 5XD, 13.5mm dia.
- KSEM130R7WN16M, 13.0mm dia. Includes special long Torx driver.
All drills Include cases. No other original accessories included.
Condition - All appear to possibly be unused but cannot verify. One drill has no index installed. Cases show grime and wear from workshop storage.
14x Sandvik Coromant CoroKey Mill Indexes WCMX 08 04 12 R-53
Skylarc Ref P117397
Expected Auction End Time: 3rd August 2020 8:28pm
14x Sandvik Coromant CoroKey Mill Indexes WCMX 08 04 12 R-53.
Includes 6x indexes of subtype 3040 and 6x Indexes of 1020 and 2x Indexes of 235.
Condition - All three cases are partials with unused Indexes within. Cases show Workshop Storage wear.
Lot of 8 Collapsible Steel Storge Boxes
Skylarc Ref U118260
Expected Auction End Time: 4th August 2020 6:40pm
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- These have been stored outside and have moderate surfaxe rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note last two photos are indicative and represent these containers when they are open and assembled respectively.
Lot of 12 Collapsible Steel Storge Boxes.
Skylarc Ref T118259
Expected Auction End Time: 3rd August 2020 9:09pm
Lot of 12 Collapsible Steel Storge Boxes.
12 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- These have moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note last two photos are indicative and represent these containers when they are open and assembled respectively.
21x Sandvik Coromant CoroKey Mill Indexes WCMX 06 T3 08 R-53
Skylarc Ref O117396
Expected Auction End Time: 4th August 2020 6:48pm
21x Sandvik Coromant CoroKey Mill Indexes WCMX 06 T3 08 R-53.
Includes 14x of subtype 3040 and 7x of 1020.
Condition - One case is still factory sealed as new. Other two cases are partials with unused Indexes within.
Iscar Indexable End Mill Cutter w/ Spare Indexes
Skylarc Ref N117395
Expected Auction End Time: 3rd August 2020 7:01pm
Iscar Indexable End Mill Cutter w/ Spare Indexes.
Cutter type N9MT11T3CT.
Includes 3x spare Indexes type ADKT 150550R-HM IC328.
Condition - Cutter appears unused but cannot verify. Spare Indexes are as new.
2x Kieninger Indexable Ball End Mill Cutters w/ Spare Indexes
Skylarc Ref M117394
Expected Auction End Time: 4th August 2020 6:19pm
2x Kieninger Indexable Ball End Mill Cutters w/ Spare Indexes.
Short Cutter type EBG R12.012AN130.
Long Cutter type EBG R12.012AR160.
Includes a partial case of replacement Indexes type LC610T (8x units).
Condition - Larger cutter appears unused but cannot verify. Smaller cutter has been cut shorter, see photos. Spare Indexes are as new.
Sandvik Coromant Indexable Coolant Mill Cutter w/ Spare Indexes
Skylarc Ref I117390
Expected Auction End Time: 3rd August 2020 7:43pm
Sandvik Coromant Indexable Coolant Mill Cutter.
Type R416.2-0254W25-3.
Includes a partial box of replacement Indexes type LCMX 04 03 08-53 3040 (8x units in box), as well as a partial box of replacement indexes type LCMX 03 08-53 1020 (7x units in box).
Condition - Cutter shows some usage. End shank has had a section cut out for mounting purposes, see photos. Spare Indexes are as new.
scar Indexable Tap Threader End Mill
Skylarc Ref L117393
Expected Auction End Time: 2nd August 2020 7:33pm
Iscar Indexable Tap Threader End Mill.
Type MTSR0012F14.
Includes 1x index unit in case, type MT14 I 2.50 ISO IC908.
Includes Hex Key tool.
Condition - End Mill appears unused but cannot verify. Index is as new in case.
2x Sandvik Coromant Indexable Ball End Mills w/ Spare Indexes
Skylarc Ref K117392
Expected Auction End Time: 2nd August 2020 9:46pm
2x Sandvik Coromant Indexable Ball End Mills w/ Spare Indexes.
Short end mill unit is type R216-16B20-040.
Long end mill has been modified so most of type number is missing, only the last four digits are visible - R???-????0-045.
Includes 2x cases with a total of 14x spare Indexes type R216-1603 M-M.
Condition - Long end mill appears to have been modified on a lathe to make shank narrower, see photos. Short end mill does not appear to have been used but cannot verify. Spare Indexes are as new.
scar Indexable Ball End Mill Cutter, w/ Spare Indexes
Skylarc Ref J117391
Expected Auction End Time: 4th August 2020 7:30pm
Iscar Indexable Ball End Mill Cutter.
Type CM-D16-B-C20.
Includes a partial case of Indexes type CR D160-QF IC328 (5x units in case).
Condition - Cutter appears to have been modified on a lathe to make the shank narrower, see photos. Extra indexes are as new.
Industrial Height Adjustable Material Roller
Skylarc Ref X117717
Expected Auction End Time: 3rd August 2020 6:49pm
Industrial Height Adjustable Material Roller.
Heavy duty industrial steel.1q
Roller height adjustable from: 460mm to 715mm.
Roller Feed Dimensions: 350mm.
Please note that the roller is seized.
CompAir Hydrovane 178 Compressor
Skylarc Ref Q117710
Expected Auction End Time: 2nd August 2020 7:26pm
CompAir Hydrovane 178 Compressor.
3 Phase Air Compressor.
Model 1780.
30KW.
Tension [v/ph/hz]:400/3/50.
See photos for full specs.
Note this unit has not been tested and is sold as is where is. This auction does NOTE include items inz on or around this unit.
Crate of Industrial Spares (Chain Hoist Equipment)
Skylarc Ref U117714
Expected Auction End Time: 3rd August 2020 7:34pm
Crate of Industrial Spares (Chain Hoist Equipment).
GIS 250-500KG Chain Hoist.
Other chain hoist equipment, cables, chains, power boxes etc.
Unsure if functioning but would be good for spare parts etc.
TaeguTec Indexable Coolant Mill Cutter w/ Spare Indexes
Skylarc Ref H117389
Expected Auction End Time: 2nd August 2020 9:10pm
TaeguTec Indexable Coolant Mill Cutter.
Type TDR 4210-25T2-06
21mm cutting diameter.
Includes partial case of spare Indexes type SPMG 060204-DG TT9030 (4x units).
Condition - Cutter shows generally minor use marks. Spare Indexes are as new.
Iscar Ball Nose Indexable Mill Cutter
Skylarc Ref G117388
Expected Auction End Time: 2nd August 2020 6:48pm
Iscar Ball Nose Indexable Mill Cutter.
Type CM D16-B-C20.
Includes a case of spare Indexes type CRF D160-QF IC950 (5x units).
Condition - Cutter appears to have been put on a lathe to have a section of its shank narrowed, see photos, but otherwise shows few very light signs of possible use. Spare Indexes are as new.
Iscar Ball Nose Indexable Mill Cutter w/ Spare Indexes
Skylarc Ref J117339
Expected Auction End Time: 2nd August 2020 6:40pm
Iscar Ball Nose Indexable Mill Cutter.
Type CM D16-B-C20.
Includes a case of spare Indexes type CR D160-QF IC328 (9x units).
Condition - Cutter shows minor use marks. Spare Indexes are as new.
Sandvik Coromant Indexable Face Mill Cutter w/ Spare Indexes
Skylarc Ref E117386
Expected Auction End Time: 4th August 2020 7:31pm
Sandvik Coromant Indexable Face Mill Cutter w/ Spare Indexes.
Type R300-015A20L-07L.
15mm diameter cut.
Includes 2x full cases of extra R300-0724E-PM indexes (20x units).
Condition - Shows generally minor signs of use. Spare Indexes are as new, one case still sealed.
Iscar Indexable Thread Tap End Mill Cutter w/ Spare Indexes
Skylarc Ref F117387
Expected Auction End Time: 2nd August 2020 7:56pm
Iscar Indexable Thread Tap End Mill Cutter.
Type MTSR0021H21.
Includes a case of spare type MT21E 16UN IC928 indexes (2x units).
Condition - Mill Cutter appears unused, as new. Spare Indexes are as new.
2 x 20FT Containers and Container Shelter Canopy
Skylarc Ref O117708
Expected Auction End Time: 2nd August 2020 6:59pm
2 x 20FT Shipping Containers and Container Shelter Canopy.
Shipping Container 1: RSSU1078557. Royal Wolf Branded standard 20 foot high cube container.
Condition - Good, no obvious signs of leaks inside, doors open and close fine and floor is structurally stable.
Shipping Container 2: TRHU2815939.
20 foot high cube containers
Container Shelter: Container Shelters NZ Branded.
Dimensions: L 6.05m x W 5.8m x H 2m
Floor Area: 35.09m² (approx)
Frame construction: 48mm diam. 2.3mm gauge, hot dip galvanised structural grade steel
Roof material: 610gsm PVC, UV stabilised & fire retardant
Number of portals: 5
Number of purlins: 5
Please note this auction is strictly for the two containers and the shelter.
2 x 20FT Containers and Container Shelter Canopy
Skylarc Ref N117707
Expected Auction End Time: 4th August 2020 7:27pm
2 x 20FT Shipping Containers and Container Shelter Canopy.
Shipping Container 1: RSSU1078557. Royal Wolf Branded standard 20 foot high cube container.
Condition - Good, no obvious signs of leaks inside, doors open and close fine and floor is structurally stable.
Shipping Container 2: TRHU2815939.
Standard 20 foot high cube container. Conditon - Good, again no obvious signs of leaks inside although floor is slightly worse condition than first container see photos.
Container Shelter: Container Shelters NZ Branded.
Dimensions: L 6.05m x W 5.8m x H 2m
Floor Area: 35.09m² (approx)
Frame construction: 48mm diam. 2.3mm gauge, hot dip galvanised structural grade steel
Roof material: 610gsm PVC, UV stabilised & fire retardant
Number of portals: 5
Number of purlins: 5
Please note this auction is strictly for the two containers and the shelter. This does not include the contajner ramps nor any other items in, on or around these units.
2 x 20FT Containers and Container Shelter Canopy
Skylarc Ref M117706
Expected Auction End Time: 3rd August 2020 6:12pm
2 x 20FT Shipping Containers and Container Shelter Canopy.
Shipping Container 1: RSSU1078557. Royal Wolf Branded standard 20 foot high cube container.
Condition - Good, no obvious signs of leaks inside, doors open and close fine and floor is structurally stable.
Shipping Container 2: TRHU2815939.
Standard 20 foot high cube container. Conditon - Good, again no obvious signs of leaks inside although floor is slightly worse condition than first container see photos.
Container Shelter: Container Shelters NZ Branded.
Dimensions: L 6.05m x W 5.8m x H 2m
Floor Area: 35.09m² (approx)
Frame construction: 48mm diam. 2.3mm gauge, hot dip galvanised structural grade steel
Dormer 4-Piece Mill Reamer Kit
Skylarc Ref Z117381
Expected Auction End Time: 2nd August 2020 6:27pm
Dormer 4-Piece Mill Reamer Kit.
Manufactured by Dormer.
Includes:
- HSS-E 206
- HSS-E 706
- HSS-E 107
- HSS-E 407
Includes case.
Condition - reamers show few minor signs of use. Case exterior shows grime and wear from workshop storage.
13x Assorted Finishing End Mills
Skylarc Ref W117378
Expected Auction End Time: 2nd August 2020 8:04pm
13x Assorted Finishing End Mills.
Brands include Iscar, Ultra Tool, Hanita.
10x with 10mm Diameter Shank and 73mm length, 3x with 8mm diameter Shank and 64mm length.
Condition - Varies with each unit. Most show few or no signs of use.
Lot of 8 Collapsible Steel Storge Boxes
Skylarc Ref G117700
Expected Auction End Time: 4th August 2020 6:46pm
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Lot of 8 Collapsible Steel Storge Boxes
Skylarc Ref H117701
Expected Auction End Time: 3rd August 2020 8:44pm
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Lot of 8 Collapsible Steel Storge Boxes
Skylarc Ref I117702
Expected Auction End Time: 2nd August 2020 8:50pm
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Lot of 8 Collapsible Steel Storge Boxes
Skylarc Ref J117703
Expected Auction End Time: 4th August 2020 9:27pm
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Lot of 8 Collapsible Steel Storge Boxes
Skylarc Ref F118999
Expected Auction End Time: 3rd August 2020 6:03pm
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Lot of 8 Collapsible Steel Storge Boxes
Skylarc Ref E118998
Expected Auction End Time: 2nd August 2020 9:38pm
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Lot of 8 Collapsible Steel Storge Boxes
Skylarc Ref D118997
Expected Auction End Time: 4th August 2020 9:41pm
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Lot of 8 Collapsible Steel Storge Boxes
Skylarc Ref C118996
Expected Auction End Time: 3rd August 2020 8:01pm
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Lot of 8 Collapsible Steel Storge Boxes
Skylarc Ref B118995
Expected Auction End Time: 2nd August 2020 6:16pm
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Lot of 8 Collapsible Steel Storge Boxes
Skylarc Ref A118994
Expected Auction End Time: 4th August 2020 6:59pm
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Lot of 8 Collapsible Steel Storge Boxes
Skylarc Ref Z118993
Expected Auction End Time: 3rd August 2020 8:38pm
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Lot of 8 Collapsible Steel Storge Boxes
Skylarc Ref Y118992
Expected Auction End Time: 2nd August 2020 6:43pm
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Lot of 8 Collapsible Steel Storge Boxes
Skylarc Ref X118991
Expected Auction End Time: 4th August 2020 6:04pm
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Lot of 8 Collapsible Steel Storge Boxes
Skylarc Ref W118990
Expected Auction End Time: 3rd August 2020 8:22pm
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Lot of 8 Collapsible Steel Storge Boxes
Skylarc Ref V118989
Expected Auction End Time: 2nd August 2020 9:46pm
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- Moderate surface rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note that the photos provided are indicative. There will be slight variations in condition and wear of these units.
Lot of 8 Collapsible Steel Storge Boxes
Skylarc Ref U118988
Expected Auction End Time: 4th August 2020 6:34pm
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- These have been stored outside and have moderate surfaxe rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note last two photos are indicative and represent these containers when they are open and assembled respectively.
28x Assorted Ball, Finish, & Square, End Mills
Skylarc Ref U117376
Expected Auction End Time: 3rd August 2020 8:04pm
28x Assorted Ball, Finish, & Square, End Mills.
Assorted brands.
Diameters range from 2mm to 16mm.
Includes 4x bit stands/holders.
Condition - Varies with each unit. Most appear unused or were slightly used as most show no visible use marks.
Gairu 100 Ton Punch and Shear
Skylarc Ref Z118629
Expected Auction End Time: 4th August 2020 7:11pm
Model: Gairu Suprema-16
Hydraulic ironworker
Three phase
100 ton pressing capacity
Flat steel cutting 250mm x 13mm
Angle 150mm x 150mm x 14mm
Punches, corner cutter, bar and angle cutting, round bar cutting
Assortment of punches and accessories
Super versatile heavy duty machine
26x Assorted Tapered End Mills
Skylarc Ref T117375
Expected Auction End Time: 4th August 2020 7:41pm
26x Assorted Tapered End Mills.
Assorted angles and sizes.
Assorted brands.
Taper angles range from 1 degree to 20 degrees.
Shank diameters range from 6mm to 16mm.
Condition - Most appear to be unused or were very lightly used. Case shows storage wear.
3 Full Sets of Insert Cutting Tools
Skylarc Ref O118982
Expected Auction End Time: 4th August 2020 6:49pm
3 x ISCAR Cutting Insert Tool Full Sets.
1 x 10 piece Sandvik Coromamt 10 Peice R390-17 04 08M-PM 1130 Coro Mill 390 Inserts - Unopened.
1 x Victory VSM490-15 Series Shoulder Mill Insert XNPU-MM【10 Pieces Per Package】
1 x Unknown Set HSD 040-078-040 40 L/S.
103mm Metal Mill Vice
Skylarc Ref S117374
Expected Auction End Time: 3rd August 2020 8:41pm
103mm Metal Mill Vice.
Solar branded, model unknown.
103mn wide Jaws.
Jaws open to approx 105mm.
Swivel base.
Mounting bolt slots approx 230mm apart on centre.
Older model unit showing moderate wear and grime from use. Jaws move smoothly.
Wilkins-Perry 250 Ton Press
Skylarc Ref Y118628
Expected Auction End Time: 4th August 2020 7:59pm
Model: Wilkins-Perry S4-250-72-48
250 ton press capacity
Stroke of press 305mm
17 strokes per minute
Bed 1820mm x 1220mm
170mm thick lower bolster
Extension plate with tee slots
Die lifters
Optical guarding
Up and down inching
Hydraulic tool roller positioner
Slide adjustment
Modified to remove the cushion so press just sits on the ground.
Manuals
Lifting bars with colletts
Built 1976
weight 33 tons
Quote for loading it on a truck is available
To see a video of this machine running:
https://youtu.be/ktgLcJCG8s8
10x Pairs of Imperial Sized Mill Parallels w/ Case
Skylarc Ref P117371
Expected Auction End Time: 3rd August 2020 8:15pm
10x Pairs of Imperial Sized Mill Parallels w/ Case.
Unknown manufacturer.
Wood case.
All pairs are 6" long and 1/8" thick.
Includes the following widths:
- 1/2"
- 5/8"
- 3/4"
- 7/8"
- 1"
- 1 1/8"
- 1 1/4"
- 1 3/8"
- 1 1/2"
- 1 5/8"
Condition varies with each pair. Some have drill nicks along edges, etc, see photos. Box exterior shows grime and wear.
BV Vibratory Finishing Machine and Dryer Set
Skylarc Ref X118627
Expected Auction End Time: 3rd August 2020 6:41pm
Two vibratory finishing machines and a dryer with control systems
Three phase
BV Ultravibe 5DR vibratory finisher
980mm diameter
BV 1200mm diameter dryer
Unknown model
BV Vibratory Finisher BV8S
1400mm diameter
Wilden type diaphragm pump
Tru Pro dust extractor
Control box
Will be uninstalled for collection
4x Assorted Steel Mill Parallels
Skylarc Ref K117366
Expected Auction End Time: 3rd August 2020 6:38pm
4x Assorted Steel Mill Parallels.
Unknown manufacturers.
Includes the following:
- 1x unit stamped 005 and is approx 235x14x55mm.
- 1x unit stamped V2 and is approx 380x18x17mm.
- 1x unit stamped G3 and is approx 164x24x23mm.
- 1x unit stamped K2 and is approx 181x30x27mm.
Condition - varies with each unit. Some show drill nicks and holes.
3 x ISCAR Cutting Insert Tool Full Sets
Skylarc Ref N118981
Expected Auction End Time: 2nd August 2020 9:31pm
3 x ISCAR Cutting Insert Tool Full Sets.
1 x 10 Piece ISCAR HM90 ADKT 150540-PDR.
1 x 10 Piece ISCAR HM90 APKT 1003PDR IC808.
1 x 10 Piece ISCAE ONMU 050505-TN-MM IC808.
See photos for full details.
7x Assorted Size Precision Engineering Diameter Spacers
Skylarc Ref I117364
Expected Auction End Time: 3rd August 2020 6:06pm
7x Assorted Size Precision Engineering Diameter Spacers.
Four units by Contitech, two units labeled S.G. Prittie.
Includes the following sizes:
- 24.0-24.20mm
- 20.70-20.90mm
- 14.82-15.18mm and 15.22-15.58mm
- 17.82-18.18mm and 19.02-19.38mm
- 12.05-12.10mm
- 8.32-8.68mm
- 8.55-8.60mm
Condition varies with each unit.
Schmid 320 Ton Fine Blanking Press
Skylarc Ref V118625
Expected Auction End Time: 2nd August 2020 6:28pm
Model: Schmid 320 mp
320 ton pressing capacity
Manufactured 1979
Three phase
Manual controls
500kg tool lifting crane with electrical crane
Hydraulic power pack
No tooling included
You will need your own lifting machinery to load this machine
Weight is around 9 tons
To see a video of this machine running:
https://youtu.be/4hZKmXdH3hs
Telmann Bar Fridge Refrigerator
Skylarc Ref F117361
Expected Auction End Time: 2nd August 2020 7:08pm
Telmann Bar Fridge Refrigerator.
Model No. TR-150.
Unknown inner capacity.
Condition - Has been used as a workshop lunch room fridge. Is operating normally. Would benefit from a moderate clean. Some yellowed interior and exterior plastic.
Lot of 8 Collapsible Steel Storge Boxes.
Skylarc Ref H118975
Expected Auction End Time: 3rd August 2020 6:42pm
Lot of 8 Collapsible Steel Storge Boxes.
8 Steel construction collapsible storage boxes.
Approximate Individual dimensions collapsed: L880mm x W675mm x H135mm.
Approximate individual external dimensions assembled:
L880mm x W675mm x H350mm.
Approximate individual internal dimensions assembled:
L850mm x W645mm x H215mm.
Condition- These have been stored outside and have moderate surfaxe rust.
See out other listing for complimentary workshop stationary/mobile stands.
Please note that items in, on or around these units are NOT included.
Note last two photos are indicative and represent these containers when they are open and assembled respectively.
2x Matching Office Book Shelf Units
Skylarc Ref E117360
Expected Auction End Time: 4th August 2020 9:22pm
2x Matching Office Book Shelf Units.
Grey laminate over MDF.
4x adjustable shelves on each unit.
Each unit is approx 910x280x2020mm.
Note - Items seen on shelves are NOT Included.
Condition - Some laminate chips, scratches etc.
Tambour Door Office Storage Cabinet by Precision
Skylarc Ref A117356
Expected Auction End Time: 2nd August 2020 9:37pm
Tambour Door Office Storage Cabinet by Precision.
Steel sides in a light grey.
Dark blue plastic tambour style doors.
Lockable, keys are included.
5x inner adjustable steel shelves.
Condition - Some dents to sides, see photos. Some matks on doors.
Large 2400mm Wide Wall Mounted Office Whiteboard
Skylarc Ref B117357
Expected Auction End Time: 3rd August 2020 9:34pm
Large 2400mm Wide Wall Mounted Office Whiteboard.
OfficeMax branded.
Measures 2400mm wide, 1200mm tall.
Magnetic backing.
Includes 2x magnetic erasers and magnetic marker tray with markers.
Condition - Some dents to board surface. Some thin black tape lines have been added.
Office Desk w/ Mobile Drawer Unit
Skylarc Ref Z117355
Expected Auction End Time: 3rd August 2020 6:17pm
Office Desk w/ Mobile Drawer Unit.
Faux Wood top laminate with dark grey laminate sides with MDF inner core.
Desk is 1500x750x730mm.
Includes Faux Wood Laminated monitor stand 500x305x95mm.
Dark grey mobile drawer unit 480x475x660mm.
Note - Auction includes only the three above mentioned items, all other items seen in photos on, under or nearby are NOT Included.
Condition - Desk shows generally lighter signs of use. Mobile has tape residue and some surface marks.
Office Desk w/ Mobile Drawer Unit & Chair
Skylarc Ref Y117354
Expected Auction End Time: 2nd August 2020 9:07pm
Office Desk w/ Mobile Drawer Unit & Chair.
Faux Wood top laminate with dark grey laminate sides with MDF inner core.
Desk is 1500x750x730mm.
Light green laminated mobile drawer unit 475x465660mm.
Executive style gas lift desk chair with black vinyl surfaces.
Note - Auction includes only the three above mentioned items, all other items seen in photos on, under or nearby are NOT Included.
Condition - Chair shows wear and use, especially on arm rests, see photos. Desk and mobile show generally lighter signs of use.
Office Desk w/ Mobile Drawer Unit & Chair
Skylarc Ref X117353
Expected Auction End Time: 3rd August 2020 8:33pm
Office Desk w/ Mobile Drawer Unit & Chair.
Faux Wood top laminate with black laminate sides with MDF inner core.
Desk is 1500x750x730mm.
Light grey mobile drawer unit 495x450665mm.
Eden Spectun 3 gas lift desk chair with black fabric.
Note - Auction includes only the above three mentioned items, all other items seen in photos on, under or nearby are NOT Included.
Condition - Mobile Unit shows some wear to laminate and marks. Desk and chair show generally lighter signs of use.
L-Shaped Corner Office Desk w/ Mobile Drawer Unit
Skylarc Ref W117352
Expected Auction End Time: 4th August 2020 6:47pm
L-Shaped Corner Office Desk w/ Mobile Drawer Unit.
Light grey laminated MDF desk 1750x1220x715mm.
Black laminated MDF mobile drawer unit 490x450x670mm.
Note - All other items seen on, under and next to the desk and mobile are NOT Included.
Condition - Some surface scratching and use marks.
Stackable Industrial Storage Bin
Skylarc Ref G118974
Expected Auction End Time: 3rd August 2020 8:09pm
Stackable Industrial Storage Bin.
Steel frame construction.
Unit has a door
Internal dimensions: 800mm x 800mm x 340mm.
Condition - Has been stored outside so has moderate surface rust - see photos.
Note this lot does not include items in, on or around this unit.
Large Fias Universal Milling Machine
Skylarc Ref H118611
Expected Auction End Time: 3rd August 2020 7:17pm
Model: Fias AF 2000x800
X axis travel 1650mm
Y axis travel 850mm
Z axis travel 900mm
Spindle nose to table max 1000mm
Spindle taper NT50
18 spindle speeds
30—2000rpm
Universal 360 degree head
Digital read outs
Horizontal spindle
2 arbor supports
Horizontal arbor
Table extension
D MCDM-4 copy head (not used in years)
Manufactured 1981
Recently had new bearings in head
Mill vice not included
But beefy machine ready for work
To see a video of this machine running:
https://youtu.be/i5KJXLydc0A
3x Heavy Duty Steel Workshop Stackable Storage Bins
Skylarc Ref V117351
Expected Auction End Time: 2nd August 2020 6:32pm
3x Heavy Duty Steel Workshop Stackable Storage Bins.
Total dimensions for each unit is approx 640x570x420mm.
Inner storage area of each is approx 570x490x305mm.
Each unit has a removable side panel for dumping contents, etc.
Stackable design, see photos.
Condition - All units show surface rusting, some denting, etc.
2x Heavy Duty Stackable Steel Industrial Storage Bins
Skylarc Ref U117350
Expected Auction End Time: 2nd August 2020 8:29pm
2x Heavy Duty Stackable Steel Industrial Storage Bins.
Raised floor approx 100mm above ground.
Inner storage area depth is approx 300mm, length approx 830mm, width 820mm.
One unit has one side that has door for dumping materials. Second unit does not have a side door.
Stackable design.
Condition - Moderate rust on surfaces. Some dented and bent components.
Heavy Workshop Material Support Roller Stand
Skylarc Ref S117348
Expected Auction End Time: 4th August 2020 8:36pm
Heavy Workshop Material Support Roller Stand.
550mm wide, 60mm diameter roller.
Adjustable roller height, currently at 1065mm.
Heavy steel I-beam base.
Condition - Appears to have been stored outside for some time. Moderate rusting to areas. Roller does roll but not smoothly.
Industrial Horizontal Storage Racking
Skylarc Ref C118970
Expected Auction End Time: 3rd August 2020 8:15pm
Industrial Horizontal Storage Racking.
Blue painted steel frame construction.
Could be used to store pipes and or sheet metals.
Outside post measurements: 1040mm x 880mm x 80mm.
Inside post height: 1150mm.
Total unit dimensions below:
Note this unit has been stored outside and aa such has minor to moderate surface rust.
Does NOT include the items in, on or around this unit.
6x Heavy Duty Stackable Steel Industrial Storage Bins
Skylarc Ref T117349
Expected Auction End Time: 4th August 2020 6:35pm
6x Heavy Duty Stackable Steel Industrial Storage Bins.
Raised floor approx 100mm above ground.
Inner storage area depth is approx 300mm, length approx 830mm, width 820mm.
One side has door for dumping materials.
Stackable design.
Condition - Moderate rust on surfaces. Some dented and bent components.
Heavy Duty Steel Industrial Storage Bin
Skylarc Ref P117345
Expected Auction End Time: 3rd August 2020 7:37pm
Heavy Duty Steel Industrial Storage Bin.
Raised floor approx 200mm above ground.
Inner depth is approx 410mm.
One side has door for dumping materials.
Note - Scrap metal seen in photos in bin will be emptied before buyer pickup and is NOT included.
Condition - Moderate rust on surfaces.
Mobile Industrial Workshop Bench/Trolley
Skylarc Ref E118972
Expected Auction End Time: 4th August 2020 8:17pm
Mobile Industrial Workshop Bench/Trolley.
Steel frame construction.
The bench top is wooden with steel sheet on top.
Unit has two posts welded on one end to attach storage bins to.
Sitting on 4 x 100mm caster wheels.
Condition - This unit has been stored outside and as such has moderate surface rust and the quality of the castors cannot be guaranteed.
Note this lot does NOT include items in, on or around unit.
Mobile Industrial Workshop Bench/Trolley
Skylarc Ref D118971
Expected Auction End Time: 3rd August 2020 6:52pm
Mobile Industrial Workshop Bench/Trolley.
Steel frame construction.
The bench top is wooden with steel sheet on top.
Unit has two posts welded on one end to attach storage bins to.
Sitting on 4 x 100mm caster wheels.
Includes small wooden under carrage step or shelf.
Not this lot does NOT include items in, on or around unit.
Note this unit has been left outside and has moderate surface rust.
John Heine Inclinable Press
Skylarc Ref G118610
Expected Auction End Time: 2nd August 2020 8:34pm
Model: John Heine 203A Series 4
30 ton press capacity
Fitted with pneumatically operated guards
Three phase
Foot controlled
Tooling not included
To see a video of this machine running:
https://youtu.be/39_Hh8CiL7c
Industrial Forklift Personnel Lifter Cage
Skylarc Ref O117344
Expected Auction End Time: 2nd August 2020 9:53pm
Industrial Forklift Personnel Lifter Cage.
Unknown manufacturer.
1000mm high side rails.
Inward oorning door.
Forklift Mast guard.
Condition - Has been stored outside. Some rust on surfaces. Unknown when last certified/inspected. Would benefit from a refurbishment.
BV Vibratory Finishing Machine
Skylarc Ref F118609
Expected Auction End Time: 4th August 2020 7:30pm
Model: BV BV8S
Vibratory unit SFL30-25/4/SS/210752
3 phase
Manufactured 2001
Electrical control box
With sump
Formerly used with caustic for cleaning oil off parts, will need decontamination for repurposing
Heavy Steel Workshop Scrap Metal Bin
Skylarc Ref N117343
Expected Auction End Time: 4th August 2020 6:57pm
Heavy Steel Workshop Scrap Metal Bin.
Fork Liftable from all sides.
Inner dimensions of bin is approx 1095mm long, 665mm wide, 900mm high.
Bin is hinged at one end for dumping.
Condition - Some rust to surfaces.
Heavy Steel Workshop Scrap Metal Bin
Skylarc Ref M117342
Expected Auction End Time: 3rd August 2020 7:34pm
Heavy Steel Workshop Scrap Metal Bin.
Fork Liftable from all sides.
Inner dimensions of bin is approx 1095mm long, 665mm wide, 900mm high.
Bin is hinged at one end for dumping.
Condition - Some rust to surfaces.
Large McGregor Industrial Furnace
Skylarc Ref E118608
Expected Auction End Time: 4th August 2020 9:35pm
Model: McGregor FAC TEMP
30kw three phase electric heating
Max operating temperature 650 degrees celsius
Internal size 980mm x 870mm x 760mm
Automatic cycling
Pneumatic powered door
Fan forced
Vented
Heavy Steel Workshop Scrap Metal Bin
Skylarc Ref L117341
Expected Auction End Time: 2nd August 2020 6:21pm
Heavy Steel Workshop Scrap Metal Bin.
Fork Liftable from all sides.
Inner dimensions of bin is approx 1095mm long, 665mm wide, 900mm high.
Bin is hinged at one end for dumping.
Note - Scrap metal seen in bin in photos will be removed before buyer pickup.
Condition - Some rust to surfaces.
Champion Compressors Air Dryer
Skylarc Ref W118964
Expected Auction End Time: 2nd August 2020 9:22pm
Champion Compressors Air Dryer.
Champion compressor branded Air Dryer.
Could not find model number nor specifications though this was tested and runs with the champion marathon CSE45 listed here on TradeMe.
Only designation found: 36430.
Items in, on or around this unit are nor included.
This will be disassembled before pickup.
Industrial Storage Bin and Stand
Skylarc Ref Y118966
Expected Auction End Time: 3rd August 2020 7:15pm
Industrial Storage Bin and Stand.
Black steel storage bin:
Outer Dimensions: 610mm x 610mm x 410mm.
Inner Dimensions: 560mm x 550mm x 390mm.
Red steel stand.
Dimensions: 600mm x 600mm x 380mm.
This lot does NOT include any items in, on or around these units.
Two Air Recieving Tanks
Skylarc Ref X118965
Expected Auction End Time: 4th August 2020 6:18pm
Two Air Recieving Tanks.
Attached to steel frame.
Unknown capacity.
Single tank dimensions to give an idea;
400mm x 400mm x 1550mm.
Will be disassembled before pickup.
Pipework to be disconnected at first joint.
Air Compressor, Champion CSE 45
Skylarc Ref S118960
Expected Auction End Time: 2nd August 2020 8:28pm
Air Compressor, Champion CSE 45.
Sullair Powered - Champion Marathon rotary screw compressor model CSE45.
780 KPA max working pressure.
48742 Service Hours.
Manufactured 2001.
Nominal motor power: 45KW @ 415V - 50hz.
Note this unit will be decommissioned for collection.
Mobile Industrial Workshop Bench/Trolley
Skylarc Ref T118961
Expected Auction End Time: 3rd August 2020 8:22pm
Mobile Industrial Workshop Bench/Trolley.
Steel frame construction.
The bench top is wooden with steel sheet on top.
Unit has two posts welded on one end to attach storage bins to.
Sitting on 4 x 100mm caster wheels.
Includes divided undercarriage shelf.
Not this lot does NOT include items in, on or around unit.
Mobile Industrial Workshop Workbench
Skylarc Ref N118955
Expected Auction End Time: 2nd August 2020 8:01pm
Mobile Industrial Workshop Workbench.
Steel frame construction.
Various hanging points/tool holders.
Sitting on 4 x 100mm caster wheels.
4 shelfs.
Note this lot does NOT include items in, on or around unit.
Besco-Truecut Sheet Metal Guillotine
Skylarc Ref Y118602
Expected Auction End Time: 4th August 2020 6:30pm
Model: Besco-Truecut 8/125
8 foot sheet metal guillotine
2530mm wide cutting width
3.1mm capacity
Blades in good condition
Back Gauge
To see a video of this machine running:
https://youtu.be/XF_9h0ai_Zo
Schmid Heavy Duty Steel Decoiler
Skylarc Ref X118601
Expected Auction End Time: 2nd August 2020 8:19pm
Feinstanz Ag Heinrich Schmid Rapperswil Schweiz
Adjustable width
Max steel width 350mm
Decoiler/leveler and straightener
Approx 10mm max thickness
6 rollers
Hydraulic lift arm with feed wheel
Forward and reverse
Manual or automatic control
Modernised with vsd
To see this machine running:
https://youtu.be/7uAMxTpLJY0
24x Assorted Hand Tools, Wrenches, Screwdrivers, Pliers & More
Skylarc Ref G117336
Expected Auction End Time: 3rd August 2020 8:20pm
24x Assorted Hand Tools.
Includes assorted Wrenches, Screwdrivers, Pliers, tin snips, socket Wrenches with 1/2" drive socket.
See photos for further details on included items.
Condition varies with each item.
6x PB Swiss Made Hex Key Wrenches, Metric Sizes
Skylarc Ref E117334
Expected Auction End Time: 2nd August 2020 6:42pm
6x PB Swiss Made Hex Key Wrenches, Metric Sizes.
Made in Switzerland by PB
Chrome Vanadium.
Includes the following sizes:
- 22mm
- 19mm
- 17mm
- 2x 10mm
- 8mm.
Condition varies with each unit.
Small Workshop Trolly
Skylarc Ref Q118958
Expected Auction End Time: 3rd August 2020 8:33pm
Small Workshop Trolly.
Steel frame construction.
Sitting on 4 x 100mm castors.
Has a riser frame in the middle assumed to be for holding bins as picture.
Please note this lot does NOT include the bin photographed.
Stackable Industrial Storage Bin
Skylarc Ref P118957
Expected Auction End Time: 2nd August 2020 6:51pm
Stackable Industrial Storage Bin.
Steel construction stackable storage bin/box.
Includes a door at front of unit.
Dimensions listed above are for external size.
Internal dimensions below:
L830mm x W790mm x H300mm.
Mobile Industrial Workshop Workbench
Skylarc Ref O118956
Expected Auction End Time: 4th August 2020 6:12pm
Mobile Industrial Workshop Workbench.
Green Steel frame construction.
Includes hanging hooks and various part and tool storage.
3 shelves.
Sitting on 4 x 100mm caster wheels.
Note this lot does NOT include items in, on or around unit.
Mobile Industrial Workshop Bench/Trolley
Skylarc Ref M118954
Expected Auction End Time: 3rd August 2020 8:10pm
Mobile Industrial Workshop Bench/Trolley.
Steel frame construction.
The bench top is wooden with steel sheet on top.
Unit has two posts welded on one end to attach storage bins to.
Sitting on 4 x 100mm caster wheels.
Not this lot does NOT include items in, on or around unit.
1x Socket Wrench & 1x Breaker Bar w/ 3/4" Inch Socket Size
Skylarc Ref Z117329
Expected Auction End Time: 3rd August 2020 8:12pm
1x Socket Wrench & 1x Breaker Bar w/ 3/4" Inch Socket Size.
Includes:
- Hero branded socket Wrench with 3/4" socket head, wrench length approx 500mm.
- Unbranded Breaker bar with 3/4" socket head, bar length approx 450mm.
Includes attached sockets in Imperial Sizes 1 1/8" and 1 5/16".
Condition - Breaker bar has a slight bend. All items shows wear and usage.
9x Assorted Wrenches, Imperial Sizes
Skylarc Ref X117327
Expected Auction End Time: 4th August 2020 8:52pm
9x Assorted Wrenches, Imperial Sizes.
Brands include Sidchrome, Stahlwille, Aigo.
Sizes include:
- 2x 1 1/4"
- 1x 1 5/16"
- 1x 1 1/16"
- 2x 11/16"
- 1x 3/4"
- 1x 1 1/16" box wrench.
- 1x 1 7/8"
Condition varies with each unit. Two Wrenches have broken box ends, see photos.
12x Assorted Wrenches
Skylarc Ref W117326
Expected Auction End Time: 3rd August 2020 8:09pm
12x Assorted Wrenches.
Includes the following sizes:
- 2x 47-50mm
- 1x 36-41mm
- 2x 30-32mm
- 1x 24-27mm
- 1x 22-24mm
- 1x 46mm
- 1x 38mm
- 1x 32mm
- 1x 27mm
- 1x 27mm box wrench.
Condition varies with each unit.
Sunnen Honing Machine and Accessories
Skylarc Ref B118085
Expected Auction End Time: 2nd August 2020 7:47pm
Model: Sunnen 650D
Single phase
Wide range of hones and accessories
Bench mounting bracket (will be unmounted for collection)
Foot controller
To see this machine running:
https://youtu.be/hu-DrrJuj60
Wooden Standing Cabinet/Podium
Skylarc Ref L118953
Expected Auction End Time: 4th August 2020 7:31pm
Wooden Standing Cabinet/Podium
Wooden material podium like cabinet.
Perfect for reviewing/storing paper documents and or any other functions in an industrial environment where one is often needing to stand.
Includes under cabinet storage space and top storage space under lid.
Condition - obvious wear and marking from general usage in a workshop environment.
Does NOT include items in, on, or around unit.
Mobile Industrial Workshop Bench/Trolley
Skylarc Ref K118952
Expected Auction End Time: 3rd August 2020 9:54pm
Mobile Industrial Workshop Bench/Trolley.
Steel frame construction.
The bench top is wooden with steel sheet on top.
Unit has two posts welded on one end to attach storage bins to.
Sitting on 4 x 100mm caster wheels.
Not this lot does NOT include items in, on or around unit.
26x Assorted Combination & Box Wrenches
Skylarc Ref V117325
Expected Auction End Time: 2nd August 2020 9:33pm
26x Assorted Combination & Box Wrenches.
Brands include Ikeda, Sidchrome, Infar, Powerbuilt, Aigo, Acesa.
Includes the following sizes:
- 1x 36-30mm open ended wrench.
- 5x 30mm.
- 1x 28mm.
- 2x 27mm
- 1x 25mm.
- 5x 24mm.
- 1x 23mm.
- 1x 21mm.
- 1x 20mm box wrench.
- 3x 19mm
- 1x 16mm
- 1x 9mm
- 1x 8mm
- 1x 7mm
- 1x 6mm
Condition varies with each unit.
Marlco Broach Press and Accessories
Skylarc Ref F117595
Expected Auction End Time: 2nd August 2020 9:25pm
Marlco bench mounted hand broach press
Mounted on stand to side of bench (will be removed for collection)
Approx 440mm stroke
Includes stand
5 small broaches
5mm, 8mm, 4mm, 6mm, 5/32" (cut short)
Wide range of collets
Chevalier Tool Cutter Grinder
Skylarc Ref D117593
Expected Auction End Time: 2nd August 2020 9:36pm
Model: Chevalier FG-30 Tool Cutter Grinder
Single phase
Capacity 32mm
X axis travel 247mm
Spindle travel 330mm
45 degrees wheel tilt adjustment
360 degree rotation of headstock
Max wheel diameter 127mm
Wheel speed 3450mm
Assorted collets (have surface rust)
Manuals
5x Rolls of 4.5x88mm Alloy Steel Strips, 3500kg
Skylarc Ref R117321
Expected Auction End Time: 4th August 2020 6:16pm
5x Rolls of 4.5x88mm Alloy Steel Strips.
SAE1045 type steel.
4x Rolls in sealed bundle, plus an extra fifth unwrapped roll on top.
Each roll is 4.5mm thick, 88mm wide, lengths unknown.
Approx 3500kg total combined weight.
Condition - 4x Rolls are new and sealed in wrapping, one roll is as new but partially unwrapped.
4x Rolls of 3.2x116mm Alloy Steel Strips, 3502kg
Skylarc Ref Q117320
Expected Auction End Time: 3rd August 2020 6:09pm
4x Rolls of 3.2x116mm Alloy Steel Strips.
SAE1045 type steel.
FES134350.
4x Rolls in bundle, each roll is 116mm wide by 3.2mm thick, length is unknown.
3502kg total pallet weight.
New unopened bundle.
Large Industrial Workshop Racking
Skylarc Ref G118948
Expected Auction End Time: 4th August 2020 8:38pm
Large Industrial Workshop Racking.
Heavy duty steel construction.
4 Tier, 4 Post,12 Shelf Unit.
Individual bay space dimensions:
1830mm x 660mm x 525
Please see dimensions below.
Note items in, on or around this unit are NOT included.
This unit will need to be disassembled for transport by the customer.
Oil Filtered Transfer Pump
Skylarc Ref G118922
Expected Auction End Time: 4th August 2020 8:50pm
Oil Filtered Transfer Pump.
Motor: Single phase induction motor.
BECY-UN, 50HZ, 230 - 460V, 1HP, 6AMP, 1455RMP.
Cannot find any information on the pump.
Pump Dimensions: L170mm x W170mm x H265mm.
Unknown specificstions or capacities.
This unit is home made (see lack of info) and has not been tested.
Schmid 320 Ton CNC Fine Blanking Press
Skylarc Ref Z118083
Expected Auction End Time: 4th August 2020 7:36pm
Schmid 2000 Type 61-320 (HRS 320)
320 ton pressing capacity
100 ton V-ring force
63 ton counter force max
30 ton stripping force
18 ton ejection force
Ram stroke 200mm
Cutting speed 10-44 m/s
Tool dimensions max 650mm x 650mm
Siemens Simatic OP37
Made 2000
Safety cabinet
Tool loading trolley
Loading brackets
Manuals
No tooling
Accessories
Tool loading subplates
The only one in NZ
You will need lifting machinery for loading
This machine weighs around 15 tons
Video of this machine running:
https://youtu.be/UESFUFBHGsU
SNCM220 Alloy Steel Coil (1786Kg)
Skylarc Ref Z118941
Expected Auction End Time: 3rd August 2020 6:20pm
SNCM220 Alloy Steel Coil (1786Kg)
1786KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
SPFH590 Alloy Steel Coil (2680Kg)
Skylarc Ref D118945
Expected Auction End Time: 2nd August 2020 8:30pm
SPFH590 Alloy Steel Coil (2680Kg).
2680Kg of packaged and palletised Industrial grade SPFH590 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
Cincinnati Milacron Vertical Machining Centre
Skylarc Ref Y118082
Expected Auction End Time: 13th August 2020 6:57pm
Model: Cincinnati Milacron Lancer 1250-50
X axis travel 1270mm
Y axis travel 660mm
Z axis travel 660mm
Nose to table max 860mm
Spindle BT50
24 tool magazine
Inner cabinet 3500mm x 1450mm x 800mm
Maximum spindle speed 6000rpm
Table size 1370mm x 660mm
Acramatic 850SX CNC controller
Spindle drive 22kva
Wired for 4th axis but not fitted
Manuals
Shipping bracket
Lifting eyes
Some accessories
Chip conveyor
Machine powers up, but looks to have lost settings.
Won't run
Unknown age, believed to be mid 1990's
This machine weighs around 9 tons.
SPFH590 Alloy Steel Coil (2660Kg)
Skylarc Ref C118944
Expected Auction End Time: 4th August 2020 7:23pm
SPFH590 Alloy Steel Coil (2660Kg).
2660Kg of packaged and palletised Industrial grade SPFH590 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
SPFH590 Alloy Steel Coil (2642Kg)
Skylarc Ref B118943
Expected Auction End Time: 3rd August 2020 6:32pm
SPFH590 Alloy Steel Coil (2642Kg).
2642Kg of packaged and palletised Industrial grade SPFH590 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
SPFH590 Alloy Steel Coil (2622Kg)
Skylarc Ref A118942
Expected Auction End Time: 2nd August 2020 6:15pm
SPFH590 Alloy Steel Coil (2622Kg).
2622Kg of packaged and palletised Industrial grade SPFH590 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
SNCM220 Alloy Steel Coil (1719Kg)
Skylarc Ref Y118940
Expected Auction End Time: 4th August 2020 6:29pm
SNCM220 Alloy Steel Coil (1719Kg)
1719KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
SNCM220 Alloy Steel Coil (1637Kg)
Skylarc Ref X118939
Expected Auction End Time: 3rd August 2020 7:00pm
SNCM220 Alloy Steel Coil (1637Kg)
1637KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
SNCM220 Alloy Steel Coil (1800Kg)
Skylarc Ref W118938
Expected Auction End Time: 2nd August 2020 6:23pm
SNCM220 Alloy Steel Coil (1800Kg)
1800KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
AISI4140 Alloy Steel Coil (2682Kg)
Skylarc Ref V118937
Expected Auction End Time: 4th August 2020 9:54pm
AISI4140 Alloy Steel Coil (2682Kg)
2682KG of packaged and palletised Industrial grade AISI4140 alloy steel coil.
Size: 6.0mm x 160mm.
Please note that the first photo of this listing is indicative and this products packaging and look might differ slightly to aforementioned photo.
AISI4140 Alloy Steel Coil (2686Kg)
Skylarc Ref U118936
Expected Auction End Time: 3rd August 2020 6:42pm
AISI4140 Alloy Steel Coil (2686Kg)
2686KG of packaged and palletised Industrial grade AISI4140 alloy steel coil.
Size: 6.0mm x 160mm.
Please note that the first photo of this listing is indicative and this products packaging and look might differ slightly to aforementioned photo.
AISI4140 Alloy Steel Coil (2822Kg)
Skylarc Ref T118935
Expected Auction End Time: 2nd August 2020 8:48pm
AISI4140 Alloy Steel Coil (2822Kg)
2822KG of packaged and palletised Industrial grade AISI4140 alloy steel coil.
Size: 6.0mm x 160mm.
Please note that the first photo of this listing is indicative and this products packaging and look might differ slightly to aforementioned photo.
SNCM220 Alloy Steel Coil (1713Kg)
Skylarc Ref S118934
Expected Auction End Time: 4th August 2020 7:41pm
SNCM220 Alloy Steel Coil (1713Kg)
1713KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
AISI4140 Alloy Steel Coil (2823Kg)
Skylarc Ref R118933
Expected Auction End Time: 3rd August 2020 9:22pm
AISI4140 Alloy Steel Coil (2823Kg)
2823KG of packaged and palletised Industrial grade AISI4140 alloy steel coil.
Size: 6.0mm x 160mm.
Please note that the first photo of this listing is indicative and this products packaging and look might differ slightly to aforementioned photo.
SNCM220 Alloy Steel Coil (1745Kg)
Skylarc Ref Q118932
Expected Auction End Time: 2nd August 2020 9:48pm
SNCM220 Alloy Steel Coil (1745Kg)
1745KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
SNCM220 Alloy Steel Coil (1629Kg)
Skylarc Ref P118931
Expected Auction End Time: 4th August 2020 7:18pm
SNCM220 Alloy Steel Coil (1629Kg)
1629KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
SNCM220 Alloy Steel Coil (1735Kg)
Skylarc Ref O118930
Expected Auction End Time: 3rd August 2020 8:55pm
SNCM220 Alloy Steel Coil (1735Kg)
1735KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging look and size might differ slightly to aforementioned photo.
AISI4140 Alloy Steel Coil (2815Kg)
Skylarc Ref N118929
Expected Auction End Time: 2nd August 2020 8:41pm
AISI4140 Alloy Steel Coil (2815Kg).
2815KG of packaged and palletised Industrial grade AISI4140 alloy steel coil.
Size: 6.0mm x 160mm.
Please note that the first photo of this listing is indicative and this products packaging and look might differ slightly to aforementioned photo.
SNCM220 Alloy Steel Coil (1706Kg)
Skylarc Ref M118928
Expected Auction End Time: 4th August 2020 8:30pm
SNCM220 Alloy Steel Coil (1706Kg).
1706KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging and look might differ slightly to aforementioned photo.
SNCM220 Alloy Steel Coil (1753Kg)
Skylarc Ref L118927
Expected Auction End Time: 3rd August 2020 8:37pm
SNCM220 Alloy Steel Coil (1753Kg).
1753KG of packaged and palletised Industrial grade SNCM220 alloy steel coil.
Size: 6.0mm x 115mm.
Please note that the first photo of this listing is indicative and this products packaging and look might differ slightly to aforementioned photo.
FANUC CNC Robodrill with Pallet Change
Skylarc Ref B117591
Expected Auction End Time: 2nd August 2020 7:18pm
Model: FANUC Robodrill Alpha-T14iC
Type A04B-0079-B101#BM
Manufactured 2001
X axis travel 500mm
Y axis travel 400mm
Z axis travel 330mm
Inner cabinet dimensions 1500mm x 900mm x 350mm
Table dimensions 500mm x 390mm
FANUC Series 16i-M CNC controller
14 tool carousel
BT30 spindle taper
8000rpm max spindle speed
Nobel SP3950B pallet changer
9 tool holders with a range of tooling
Manuals
Tidy machine straight out of work
To see this machine running:
https://youtu.be/IAPEBimTKtQ
3x Assorted Lathe Boring Bars
Skylarc Ref Z117303
Expected Auction End Time: 4th August 2020 8:22pm
3x Assorted Lathe Boring Bars.
Includes:
- Sandvik Coromant type R166.4KF-25F16, measures 300mm in length, with case.
- Kennametal type A20Q-NNTOR2 NF6, 180mm in length, Includes case.
- Boring Bar marked S20S-CTFPR 11, brand unknown, 250mm length.
Condition varies with each unit.
Mobile Wooden Standing Cabinet/Podium
Skylarc Ref J118925
Expected Auction End Time: 2nd August 2020 6:45pm
Mobile Wooden Standing Cabinet/Podium.
Wooden material podium like cabinet.
Perfect for reviewing/storing paper documents in an industrial environment where one is often needing to stand.
Includes under cabinet storage space and top storage space under lid.
Sitting on 100mm caster wheels.
This lot does NOT include items in on or around unit.
Mounted Multi-purpose Manual Sheet Metal Shear
Skylarc Ref I118924
Expected Auction End Time: 4th August 2020 9:39pm
Mounted Multi-purpose Manual Sheet Metal Shear.
Sitting on 3 leg work horse stand.
Work horse stand surface dimensions: L1220mm x W125mm x H795mm.
Blade length: 225mm.
Manual safety lock.
Heavy Duty Workshop Tool 24-Drawer Storage Unit
Skylarc Ref A117590
Expected Auction End Time: 4th August 2020 7:13pm
Heavy Duty Workshop Tool 24-Drawer Storage Unit.
Each drawer has an interior space of approx 560x500x50mm.
Top surface of unit has a 20mm thick MDF board attached with a hight above floor of 995mm.
A milling Tool Holder rack is attached to top and measures approx 840x420x210mm.
Non-Lockable drawers..
Note - Items seen on top of unit are NOT Included.
Condition - Unit shows moderate wear and usage. One ottom drawer is jammed shut. Some drawers need some adjusting to open.
18x Assorted Lathe Boring Bars
Skylarc Ref Y117588
Expected Auction End Time: 2nd August 2020 9:39pm
18x Assorted Lathe Boring Bars.
Unknown manufacturers.
Diameters range from approx 3mm to 16mm.
Lengths from approx 58mn to 166mm.
Conditiin varies with each unit. Some appear unused while others show varying levels of usage.
FANUC Robocut Wire Cut Machine
Skylarc Ref Q118074
Expected Auction End Time: 4th August 2020 7:24pm
Model: FANUC Robocut Alpha-0iC
Type A04B-315-B001#D5
Manufactured December 2003
X axis travel 320mm
Y axis travel 220mm
Z axis travel 180mm
U axis maximum travel +-60
V axis maximum travel +-60
Max workpiece weight 500kg
FANUC Series 180is-WB CNC Controller
Coolant tank
Power control box
Manuals
New stainless lockdown screws
Vice
High strength magnets
17x Assorted Lathe Boring Bars
Skylarc Ref X117587
Expected Auction End Time: 4th August 2020 8:43pm
17x Assorted Lathe Boring Bars.
Unknown manufacturers.
Lengths range from approx 95mm to 160mm.
Diameters range from 11mm to 19mm.
Some units can be used with either end, see photos.
Condition varies with each unit. Some appear unused while others show wear and usage.
4x NT35 Type Mill Tool Holders w/ Assorted Collets & More
Skylarc Ref U117584
Expected Auction End Time: 4th August 2020 8:33pm
4x NT35 Type Mill Tool Holders w/ Assorted Collets & More.
Unable to find a manufacturer mark.
Includes 10x long Collets in assorted Metric sizes.
Includes 7x short Collets, Unkmoen if compatible with Tool Holders?
Includes steel case 210x210x90mm.
See photos for further details on type of tool holders and other included components.
Cincinnati Tool Cutter Grinder
Skylarc Ref J118067
Expected Auction End Time: 4th August 2020 9:40pm
Model: Cincinnati No.2 Cutter and Tool Grinder
X axis travel 400mm
Distance between centres 540mm
Max workpiece diameter 240mm
360 degrees wheel and workpiece rotation
Grinding wheel speeds 3800/5650rpm
Three phase
100mm three jaw chuck
150mm four jaw chuck
Assorted wheels
Driving dogs
Covers
Lockdown bolts
Manuals
To see this machine running:
https://youtu.be/APEWusBOwfk
Assorted Lot of Precision Indicator Guages
Skylarc Ref C118918
Expected Auction End Time: 3rd August 2020 7:11pm
Assorted Lot of Precision Indicator Gauges
1 x Mercer England Precision Measuring Dial Indicator Gauge Type 301 - Analog Gauge, seems to be working but hasn't been checked for calibration.
4 x Mitutoyo digital precisiin indicator guages (2 of which have been tested as working but not calibrated.
4 broken gauges useful for parts.
Shigya Seiki Cylindrical Grinder
Skylarc Ref I118066
Expected Auction End Time: 3rd August 2020 6:01pm
Model: Shigya Seiki G-27 (GAUG-27.60)
X axis travel 400mm
Distance between centres 600mm
Max workpiece diameter 150mm
Automatic traverse X axis and wheel plunge
Max wheel diameter 405mm
Max wheel head stroke 160mm
Max table stroke 770mm
No.4 morse taper spindle
Manufactured 1980
Coolant pump
Hydraulic power pack
Marpos measuring head and panel
5 grinding wheels
Wheel ballance kit
Internal grinding mounting
Faceplate
Chuck 200mm
Dogs
Manuals
To see this machine running:
https://youtu.be/eonP-I_jWv8
Large Blohm Surface Grinder
Skylarc Ref H118065
Expected Auction End Time: 3rd August 2020 7:37pm
Model: Blohm-Simplex 75
X axis travel 700mm
Y axis travel 460mm
Magnetic chuck dimensions 800mm x 500mm
Grinding wheel speeds 1400/2800rpm
300mm wheel diameter
Power traverse on all axis
5 x wheel hubs
9 x stones
Coolant tank
Electrical box
Manuals
Toolkit
Riser blocks and accessories
To see this machine running:
https://youtu.be/KsF3h7QPjjU
28 Drawer Solid Timber Cabinet
Skylarc Ref A118916
Expected Auction End Time: 4th August 2020 9:49pm
28 Drawer Solid Timber Cabinet.
Wooden handles.
Looks to be constructed of oregon.
Top trimming broken off on left side and minor damage to the left side of unit (see photos).
Classic piece of industrial furniture
Please note that contents in, on or around this unit are NOT included in this lot.
Tekko Surface Grinder
Skylarc Ref F118063
Expected Auction End Time: 2nd August 2020 8:06pm
Model: Tekko SGH-400
X axis travel 300mm
Y axis travel 190mm
Magnetic chuck
Chuck dimensions 350mm x 150mm
Removable guards
200mm diameter grinding wheel
Manufactured 1966
Made in Japan
Power traverse
Manual horizontal and vertical feed
To see this machine running:
https://youtu.be/pk_762Ik9lE
NT40 Type Mill Tool Holder w/ 125mm Grinding Wheel Attachment
Skylarc Ref M117576
Expected Auction End Time: 3rd August 2020 6:56pm
NT40 Type Mill Tool Holder w/ 125mm Grinding Wheel Attachment.
Unable to find any ID marks on tool Holder.
See photos for further tool and Grinding wheel details.
Both units show wear and usage.
Blohm-Simplex Surface Grinder
Skylarc Ref D118061
Expected Auction End Time: 4th August 2020 6:43pm
Model: Blohm-Simplex 7
Three phase
X axis travel 660mm
Y axis travel 275mm
Chuck dimensions 700mm x 300mm
Magnetic table
300mm wheel diameter
Removable guards
Max table load 520 kg
Grinding motor 4kw
Coolant tank
1400/2800 rpm wheel speed
Balance wheels
Spare grinding wheels
Manuals
4 hubs
Riser blocks
Tool kit
To see this machine running:
https://youtu.be/1zSgLV_wdHQ
4x Assorted NT50 Type Mill Tool Holders
Skylarc Ref L117575
Expected Auction End Time: 4th August 2020 9:31pm
4x Assorted NT50 Type Mill Tool Holders.
One unit has a 13mm Jacobs Chuck branded chuck with key.
Another unit is stamped with 50-NS-40, 173587.
Remaining two units have no visible id marks.
See photos for further type details.
All appear to be older units.
L Shaped Industrial Steel Shelving
Skylarc Ref X118913
Expected Auction End Time: 3rd August 2020 7:34pm
L Shaped Industrial Steel Shelving
18 Adjustable Shelves.
Note this unit is haphazardly assembled and may need to be disassembled on collection for transport.
Does NOT includes in, on or around this unit.
16x Assorted Milling Chuck Collets w/ 5x Autolock Units
Skylarc Ref I117572
Expected Auction End Time: 3rd August 2020 9:42pm
16x Assorted Milling Chuck Collets w/ 5x Autolock Units.
Unknown brand of Collets. Overall dimensions of each collet is approx 43mm diameter and 55mm long. Assorted inner diameters.
Includes five various Clarkson and Larcher branded Autolock chuck units, see photos for further details.
2 x Lifting Chains
Skylarc Ref T118909
Expected Auction End Time: 2nd August 2020 6:50pm
2 x Lifting Chains.
1 x 7.1mm sized 1740mm length lifting chain with 2 x Kito VSO63 hooks (Cert Expired 02/2020).
1 x 7.1mm sized 665mm length lifting chain with 2 x Pewag KLHW8 10 hooks (Cert Expired 02/2020).
Please see photos of plates for capacity working load limit.
14x Assorted Slitting & Gear Milling Cutter Blades, Imperial Sizes
Skylarc Ref F117569
Expected Auction End Time: 2nd August 2020 6:05pm
14x Assorted Slitting & Gear Milling Cutter Blades, Imperial Sizes.
Assorted brands.
Includes one Sutton gear cutter type 8-12 2-3/4" 90degree x 1.
Includes one Sheffield straight tooth cutter type 5 x 5/32 x 1.
Includes 12x Assorted sizes of Slitting Cutters with diameters from 3" to 6" and thickness from 1/4" to 1".
Condition varies with each unit, some appear unused with boxes, others show varying use.
20x Assorted Slitting Milling Cutter Blades, Imperial Sizes
Skylarc Ref C117566
Expected Auction End Time: 4th August 2020 9:55pm
20x Assorted Slitting Milling Cutter Blades, Imperial Sizes.
Assorted brands.
Diameters range from 3" to 8".
Thicknesses vary from 1/32" to 1/8".
Condition varies with each unit.
26x Assorted Slitting Milling Cutter Blades, Imperial Sizes
Skylarc Ref E117568
Expected Auction End Time: 4th August 2020 7:23pm
26x Assorted Slitting Milling Cutter Blades, Imperial Sizes.
Assorted brands.
Diameters range from 3" to 6".
Thicknesses vary from 1/32" to 1/4".
Condition varies with each unit, some appear unused with boxes, others show varying use.
20x Assorted Slitting Milling Cutter Blades, Imperial Sizes
Skylarc Ref D117567
Expected Auction End Time: 2nd August 2020 6:06pm
20x Assorted Slitting Milling Cutter Blades, Imperial Sizes.
Assorted brands.
Diameters range from 4" to 6".
Thicknesses vary from 1/32" to 13/64".
Condition varies with each unit.
18x Assorted Convex Radius & Bevel Mill Cutters, Imperial Sizes
Skylarc Ref A117564
Expected Auction End Time: 4th August 2020 9:47pm
18x Assorted Convex Radius & Bevel Mill Cutters, Imperial Sizes.
Assorted brands.
Cutter diameters range from approx 70mm up to approx 110mm.
Assorted Imperial cutting widths and assorted angles.
Condition varies with each unit.
Van Norman Piston Turning and Grinding Machine
Skylarc Ref E118036
Expected Auction End Time: 3rd August 2020 7:43pm
Model: Van Norman No. 3 Re-Li-O
Piston Turning and Grinding Machine
Three phase
160mm chuck
Has been used as a cut off machine by the current user
Missing chuck turning belt and pully
Runs but unsure what needs doing to return to its original function.
To see this machine running:
https://youtu.be/mnv-UNJWTgA
10x Assorted Convex Radius Mill Cutters, Imperial Sizes
Skylarc Ref Y117562
Expected Auction End Time: 4th August 2020 6:13pm
10x Assorted Convex Radius Mill Cutters, Imperial Sizes.
Nine units are Selson branded in the following sizes:
- 2x 13/32"
- 4x 5/16"
- 3x 3/16"
One unit has no visible markings.
All cuttter diameters are approx 113mm.
Condition varies with each unit.
12x Assorted Convex Radius Mill Cutters, Imperial Sizes
Skylarc Ref Z117563
Expected Auction End Time: 4th August 2020 6:09pm
12x Assorted Convex Radius Mill Cutters, Imperial Sizes.
Assorted brands.
Diameters of disks range from approx 50mm to 112mm.
Cutting widths range from 0.087" to 1".
Condition varies with each unit.
11x Assorted Square & Rounded Edge End Mill Bits, Imperial Sizes
Skylarc Ref X117561
Expected Auction End Time: 4th August 2020 9:31pm
11x Assorted Square & Rounded Edge End Mill Bits, Imperial Sizes.
Four rounded edge end Mills and seven square end Mills.
Imperial sizes range from 1 3/16" to 1 3/4".
Condition varies with each unit.
Bilstein Workshop Press
Skylarc Ref X118029
Expected Auction End Time: 2nd August 2020 9:11pm
Model: Bilstein W465
Capacity 60000kg
Distance between sides 1060mm
Width of gap between horizontals 245mm
100mm diameter press end
Adjustable height platform
Pneumatic powered
Includes 2 x 80mm thick press blocks
Doall Heavy Duty Metal Cutting Bandsaw
Skylarc Ref T118025
Expected Auction End Time: 4th August 2020 6:08pm
Model: Doall V36
Three phase
Contour sawing band saw
36" (915mm) throat
250mm table to guide max capacity
Job selection wheel
775mm x 775mm tilting table
Table rip fence
Built in DBW 1 blade welder
Wide range of blade guides
Heavy load slides
Foot operated power feed
Variable speed
File guides
Spare blades
Manuals
Incredibly versatile saw of the highest quality
7x Assorted Finishing End Mill Cutters, Metric & Imperial Sizes
Skylarc Ref U117558
Expected Auction End Time: 2nd August 2020 9:34pm
7x Assorted Finishing End Mill Cutters, Metric & Imperial Sizes.
Assorted brands.
Sizes include:
- 2x 50mm
- 1x 42mm
- 1x 1 7/16"
- 1x 1 5/16"
- 2x units with worn off markings.
Condition varies with each unit.
Workbench with Mill Lockdown Kits
Skylarc Ref S118024
Expected Auction End Time: 2nd August 2020 8:43pm
40mm thick solid timber top
920mm high worktop
2 x roll out drawer trolleys
Shelves below
Record No. 5 125mm vice
Mount with large number of mill lockdown bolts
Box of mill bed nuts
Assorted mill lockdown plates
43x Assorted Ball, Square, & Finishing End Mill Bits
Skylarc Ref R117555
Expected Auction End Time: 2nd August 2020 6:08pm
43x Assorted Ball, Square, & Finishing End Mill Bits.
Assorted brands.
Sizes range from 6mm up to 12mm.
See photos for further type details.
Condition varies with each unit. Some are as new with cases while others show varying usage.
20x Assorted Finishing End Mill Cutters & More
Skylarc Ref O117552
Expected Auction End Time: 4th August 2020 8:09pm
20x Assorted Finishing End Mill Cutters & More.
Assorted brands.
Sizes range from 12mm up to 20mm.
Also includes 1x rounded edge end Mill and 1x jobber drill end Mill.
Condition varies with each unit, some appear as new unused while others show usage.
3x Straight Tooth & 3x Staggered Tooth Mill Cutters
Skylarc Ref L117549
Expected Auction End Time: 2nd August 2020 8:56pm
3x Straight Tooth & 3x Staggered Tooth Mill Cutters.
Includes the following Staggered Tooth Cutters:
- 1x Clarkson 6" x 1/2" x 1"
- 1x Clarkson 6" x 5/8" x 1
- 1x Clarkson 6" x 3/4x 1 1/4"
Includes the following straight tooth Cutters:
- 1x Sheffield 6" x 3/32" x 1"
- 2x 6" Cutters with no visible ID marking.
Condition varies with each unit.
22x Straight Tooth Mill Cutters
Skylarc Ref K117548
Expected Auction End Time: 4th August 2020 8:35pm
22x Straight Tooth Mill Cutters.
Assorted brands.
All are Imperial Sizes.
Sizes range from 3" to 5" diameter with a variety of thicknesses.
Condition varies with each unit. Some are as new in original wax coating, some show rust spotting and possible usage.
10x Staggerd Tooth Mill Cutters
Skylarc Ref J117547
Expected Auction End Time: 3rd August 2020 7:59pm
10x Staggerd Tooth Mill Cutters.
Includes:
- 1x Clarkson 6" x 5/8" x 1"
- 1x Clarkson 6" x 1/2" x 1 1/4"
- 1x Clarkson 6" x 3/8" x 1"
- 1x Sheffield 5" x 3/16" x 1:"
- 1x Clarkson 4" x 1" x 1 1/4"
- 1x Clarkson 4" x 3/16" x 1 1/4"
- 1x Sheffield 4" x 5/8"
- 2x Sheffield 4" x 1/4"
- 1x Clarkson 3" x 3/4" x 1"
Condition varies with each unit. Most appear to be possibly unused but older stock.
4x Staggerd Tooth Mill Cutters
Skylarc Ref I117546
Expected Auction End Time: 4th August 2020 9:06pm
4x Staggerd Tooth Mill Cutters.
Includes:
- 2x Clarkson 8" x 1/2" x 1 1/4" Cutters.
- 2x Moore 8" x 1/2" x 1 1/4" Cutters.
Condition - 2x Cutters are unused and still in original wax coating. 2x Cutters are opened but unsure if used, dirty from long term storage.
8x Assorted Ball, Square Edge, & Rounded Edge Mill Cutters
Skylarc Ref H117545
Expected Auction End Time: 3rd August 2020 6:31pm
8x Assorted Ball, Square Edge, & Rounded Edge Mill Cutters.
Includes:
- 2x 22mm
- 1x 24mm
- 1x 25mm
- 1x 26mm
- 1x 30mm
- 1x 32mm
- 1x 36mm.
See photos for further type details.
Condition varies with each unit.
29x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits
Skylarc Ref Y117536
Expected Auction End Time: 4th August 2020 8:54pm
29x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits.
Assorted brands.
Sizes Include 10mm, 15mm and 16mm (not all verified).
See photos for further type details.
Condition varies with each unit
95x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits
Skylarc Ref W117534
Expected Auction End Time: 2nd August 2020 9:14pm
95x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits.
Sizes a range from 2mm up to 11mm.
Assorted brands.
See photos for further type details.
Condition varies with each unit.
79x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits
Skylarc Ref X117535
Expected Auction End Time: 4th August 2020 8:57pm
79x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits.
Assorted brands.
Sizes range from 6.5mm to 14mm (not all units inspected for size)
See photos for further type details.
Condition varies with each unit.
8x Assorted Ball, Square Edge, & Finishing End Mill Bits
Skylarc Ref E117542
Expected Auction End Time: 3rd August 2020 6:01pm
8x Assorted Ball, Square Edge, & Finishing End Mill Bits.
Includes 3x 32mm and 2x 34mm, 2x 35mm, and 1x 36mm units.
Assorted brands.
See photos for further type details.
Condition varies with each unit.
4x Assorted Ball, Square Edge, & Finishing End Mill Bits
Skylarc Ref D117541
Expected Auction End Time: 2nd August 2020 8:48pm
4x Assorted Ball, Square Edge, & Finishing End Mill Bits.
Includes 3x 30mm and 1x 31mm units.
Assorted brands.
See photos for further type details.
Condition varies with each unit.
14x Assorted Ball, Square Edge, & Finishing End Mill Bits
Skylarc Ref C117540
Expected Auction End Time: 4th August 2020 10:00pm
14x Assorted Ball, Square Edge, & Finishing End Mill Bits.
Includes sizes 21mm, 25mm, and 26mm.
Assorted brands.
See photos for further type details.
Condition varies with each unit.
13x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits
Skylarc Ref B117539
Expected Auction End Time: 3rd August 2020 9:02pm
13x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits.
Includes sizes 21mm, 22mm, and 24mm.
Assorted brands.
See photos for further type details.
Condition varies with each unit.
21x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits
Skylarc Ref A117538
Expected Auction End Time: 2nd August 2020 6:18pm
21x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits.
Assorted brands.
Metric and Imperial Sizes.
Sizes range from 5/32 to 23/32 imperial and 11.5mm to 20mm Metric.
See photos for further type details.
Condition varies with each unit
38x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits
Skylarc Ref Z117537
Expected Auction End Time: 4th August 2020 9:30pm
38x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits.
Assorted brands.
Sizes Include 17mm, 18mm, 19mm and 20mm (not all verified).
See photos for further type details.
Condition varies with each unit
46x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits
Skylarc Ref V117533
Expected Auction End Time: 2nd August 2020 7:23pm
46x Assorted Ball, Square Edge, Rounded Edge & Finishing End Mill Bits.
Sizes range from 8.0, 8.5, 9.0, and 9.5mm (not all inspected).
See photos for further type details.
Condition varies with each unit, some include cases.
Jiang Ning Three Phase Lathe
Skylarc Ref U118000
Expected Auction End Time: 3rd August 2020 6:54pm
Model: Jiang Ning Machine Works HG32 320x750
Total bed length 1160mm
X axis travel 600mm
Y axis travel 105mm
Distance between centres 750mm
Swing over bed 160mm
Swing over crossslide 100mm
12 speeds
39 - 2000 rpm
Metric and imperial thread cutting
Quick change tool post
160mm three jaw chuck
160mm four jaw chuck
290mm face plate
Steady
Manual
Accessories
Foot brake
Coolant pump
To see this machine running:
https://youtu.be/X0u90XM-MRA
6x Assorted Dovetail Cutters & 6x Assorted Bevel Cutters Milling Bits
Skylarc Ref S117530
Expected Auction End Time: 3rd August 2020 6:32pm
6x Assorted Dovetail Cutters & 6x Assorted Bevel Cutters Milling Bits.
All units appear to be Clarkson brand.
Includes the following Dovetail cutters:
- 2x 1 1/2 inch at 55 degrees.
- 2x 1 1/2 inch at 45 degrees.
- 1x 1 1/2 inch at 60 degrees.
- 1x 5/8 Inch at 60 degrees.
Includes the following Bevel cutters:
- 4x 1 1/2 inch at 60 degrees.
- 2x 1 1/2 inch at 45 degrees.
Condition varies with each unit
26x Assorted Ball End Mill Cutters, Metric & Imperial Sizes
Skylarc Ref R117529
Expected Auction End Time: 4th August 2020 9:19pm
26x Assorted Ball End Mill Cutters, Metric & Imperial Sizes.
Assorted sizes. Sizes range from 5/32 up to 3/4 inch in Imperial and 4mm to
20mm in Metric.
Condition varies with each unit. Some include cases.
8 x Lathe Tools
Skylarc Ref K117990
Expected Auction End Time: 3rd August 2020 7:20pm
Sandvik corona C45 in 22mm x 10.5mm holder
Iscar Cut-grip GGHN-32-3DG in Sandvik 150.2—2520—25 holder
Iscar Cut-grip GGHN-32-3DG
Iscar HFFR 140-4T30 one end broke
Armstrong No.21 holder with cutting tool
JS. 45S holder with cutting tool
Iscar Tang-Grip TGFH 26-2 with tool Holder
Seco US101—0808 holder with cutting tool
4x Assorted T--Slot Mill Cutters, Imperial Sizes
Skylarc Ref P117527
Expected Auction End Time: 2nd August 2020 8:03pm
4x Assorted T--Slot Mill Cutters, Imperial Sizes.
All are Clarkson brand.
Includes the following sizes:
- 1 33/64 x 11/16 (2x units)
- 1 45/64 x 51/64
- 1 21/64 x 37/64
Condition varies with each unit.
31x Assorted Sizes of Keyset & T--Slot Mill Cutters
Skylarc Ref O117526
Expected Auction End Time: 4th August 2020 8:04pm
31x Assorted Sizes of Keyset & T--Slot Mill Cutters.
Most units appear to be Keyset type.
Mix of Metric and Imperial Sizes
Sizes range from 3/8x3/32 imperial to 1212 metric (Clarkson brand)
Brands include Clarkson, P&N, Balfour, and more.
Condition varies with each unit.
Sandvik Coromant Mill Cutter
Skylarc Ref D117515
Expected Auction End Time: 2nd August 2020 7:51pm
Sandvik Coromant Mill Cutter.
Unfortunately only the Sandvik label is still discernable, the specific part number unfortunately can no longer be read. Approx diameter of cutter is about 137mm
Tool Holder mount end is approx 75mm diameter.
15x Assorted Corner Rounding End Mill Bits, Imperial Sizes
Skylarc Ref M117524
Expected Auction End Time: 2nd August 2020 7:48pm
15x Assorted Corner Rounding End Mill Bits, Imperial Sizes.
Includes Larcher and Clarkson brands
Includes the following sizes:
- 2x 1/2 inch
- 1x 5/8 inch
- 2x 3/8 inch
- 2x 5/16 inch
- 1x 1/4 inch
- 2x 3/16 inch
- 3x 1/8 inch
- 2x 1/16 inch
21x Assorted Corner Rounding End Mill Bits, Metric Sizes
Skylarc Ref N117525
Expected Auction End Time: 4th August 2020 6:09pm
21x Assorted Corner Rounding End Mill Bits, Metric Sizes.
Clarkson and Larcher brands.
Includes the following sizes:
- 1x 16mm
- 1x 12mm
- 2x 10mm
- 2x 8mm
- 2x 6mm
- 2x 5mm
- 3x 4mm
- 4x 3mm
- 1x 2.5mm
- 3x 2mm
Condition varies with each unit.
Graziano Three Phase Lathe
Skylarc Ref E117984
Expected Auction End Time: 2nd August 2020 7:32pm
Model: Graziano Sag 17
Bed total length 1930mm
Between centres 1300mm
Swing over gap 280mm
Swing over bed 230mm
Swing over cross slide 140mm
Throat diameter 50mm
X axis travel 1035mm
Y axis travel 161mm
12 speeds
Metric and Imp thread cutting
Forward and reverse
6hp mtr
Coolant pump
Change gears
Taper cutter
Travelling, fixed steadies
260mm three jaw chuck
260mm four jaw chuck
480mm face plate
Quick change post 7 tool holders
Collett chuck head & collets
Live, dead centres
Manual
To see this machine running:
https://youtu.be/07YNNSnU5XU
4x Assorted Lathe Turning Tools
Skylarc Ref L117523
Expected Auction End Time: 3rd August 2020 6:15pm
4x Assorted Lathe Turning Tools.
Includes:
- Valenite Loc-a-dfx MTGNR-2525-16 1-0
- Unknown brand SSDCR 2525M12.
- Carboloy MTJNL 2525-22.
- Unknown brand and model, no visible markings, 2525 size.
See photos for further type details.
2x Lathe Knurling Tools
Skylarc Ref F117517
Expected Auction End Time: 2nd August 2020 7:32pm
2x Lathe Knurling Tools.
Includes:
- J&S model 1015 Knurling tool.
- unmarked Knurling tool.
Both tools have Lathe mounting bar of approx 110mm long 28mm wide, 13mm thick.
Unmarked toll has missing knurler wheel.
Both appear to be older units.
Black & Decker Bench Grinder w/ Stand
Skylarc Ref A117512
Expected Auction End Time: 2nd August 2020 8:53pm
Black & Decker Bench Grinder w/ Stand.
Model No. BG/8M
2900rpm.
Uses 150mm diameter Grinding wheels
Grinder itself measures approx 350x220x225mm.
Mounted on a heavy Steel base stand approx 500x260x400m solid steel base with 880mm stand height.
Attached cooling bin.
Condition - Older model Grinder showing heavy wear and usage. Power cord shows a few breaks in outer casing, would benefit from a replacement. Grinder operates normally.
Cincinnati ELR Universal Milling Machine
Skylarc Ref W117976
Expected Auction End Time: 3rd August 2020 7:55pm
Model: Cincinnati 307-12 Dial Type Milling Machine
3 phase
Overall table dimensions 1660 x 310mm
Tee slot length 1445mm
X axis travel 850mm
Y axis travel 340mm
Z axis travel 280mm
Spindle to table max 317mm
Spindle to table min 115mm
NT50 spindle
NT50 to NT40 adapter
X, Y, Z powerfeeds
22 spindle speeds
21rpm - 1485rpm
16 feed speeds
Optisyn 1500M digital read out
Lead drive mechanism
Gear set
2 x horizontal arbor mounts
3 x horizontal arbors
215mm vice
3hp motor
Manuals and accessories
Video of this machine running:
https://youtu.be/osiIqao63Kw
NT40 Type Mill Tool Holder w/ Mill Cutter Attachment
Skylarc Ref X117509
Expected Auction End Time: 4th August 2020 8:11pm
NT40 Type Mill Tool Holder w/ Mill Cutter Attachment.
No visible identification marks on tool Holder.
Only partial marks on Cutter are visible. Cutter has 25mm diameter cut. See photos for further type details.
PWB Swiss Tool Boy Milling Tool Holder Changing Station w/Mill Tool Storage Rack
Skylarc Ref K117496
Expected Auction End Time: 4th August 2020 9:00pm
PWB Swiss Tool Boy Milling Tool Holder Changing Station
Hole for Tool is 70mm diameter.
Overall tool Holder dimensions 320mm long, 160mm wide (at base), 155mm tall.
Rotateable from horizontal to vertical.
Includes a yellow Mill Tool holing rack that can accomadate six milling Tool Holders. It measures approx 600x150x145mm with Tool holes approx 70mm diameter.
Condition - Both units show Workshop wear and use.
Donau Radial Arm Drill
Skylarc Ref C117956
Expected Auction End Time: 2nd August 2020 9:19pm
Model: Donau Type DR 32
Three phase
Table dimensions 1070mm x 400mm
Morse taper no 3 spindle
18 speeds
41 - 1800 rpm
4 feed rates
4 x 19mm tee slots
Chuck to table 540mm
Great sized machine straight out of work
To see a video of this machine running:
https://youtu.be/CoupTL4A1ek
Workshop Workbench w/ Record Vice
Skylarc Ref I117494
Expected Auction End Time: 3rd August 2020 9:49pm
Workshop Workbench w/ Record Vice.
Steel frame with 20mm thick MDF boards for top and lower surfaces.
Includes Record brand No. 5 Benchtop vice.
Note - Any other items seen in photos on, in or near Workbench are NOT Included.
MDF boards show wear from workshop usage.
Magnetic Base Stand w/ Girod Dial Indicator Gauge
Skylarc Ref B117487
Expected Auction End Time: 3rd August 2020 9:37pm
Magnetic Base Stand w/ Girod Dial Indicator Gauge.
Unknown brand/model magnetic Base Stand. 230mm total height with approx 250mn long horizontal side bar attachment.
Inudes attached dial indicator Guage made in Switzerland by Girod. Tast model.
Condition - Gauge appears to function normslly but not tested for accuracy. Magnetic Base has company name etched into it.
Agietron Spark Eroder
Skylarc Ref U117948
Expected Auction End Time: 4th August 2020 7:35pm
Model: Agieplus EMS-3
Agietron KOPF-30 head
Manufactured 1978
X axis travel 420mm
Y axis travel 320mm
Z axis travel 400mm
Tapped hole table dimensions 630mm x 500mm x 20mm
Tee slot table underneath
Dimensions 630mm x 500mm
Acurite MillMate digital read out
System 3R Orbi-cut chuck system
Rotary head
Collet set in case
Assorted electrodes
Fixed stage
Rotary stage
2 x electrode mounting chucks
4x Steel Mill Parallels
Skylarc Ref Q117476
Expected Auction End Time: 3rd August 2020 10:00pm
4x Steel Mill Parallels.
Unknown manufacturer.
All stamped with "G3".
Two units are 82mm long, other two are 80mm long. All are 24mm wide, 22mm high.
Condition - Some nicks from drill bits on units, see photos.
Agietron Spark Eroder
Skylarc Ref S117946
Expected Auction End Time: 3rd August 2020 6:54pm
Model: Agietron EMS-15
Manufactured 1976
X axis travel 320mm
Y axis travel 250mm
Z axis travel 175mm
Table dimensions 560mm x 370mm
Removable table with T-slot bed underneath
Three phase
Nikon MC-202 digital read out
Control box
Diaelectric fluid pump
Rotary head
Electrode machining block
Steels
Collet chuck
Microscope
Manuals
Cylindrical square
To see a video of this machine running:
https://youtu.be/aoPGeXVP-8I
Vintage Heavy Wood Workshop Workbench
Skylarc Ref J117469
Expected Auction End Time: 4th August 2020 8:45pm
Vintage Heavy Wood Workshop Workbench.
Thick wood frame with 40mm thick wood board top surface.
Lower storage shelf.
Workbench shows heavy wear and use. Front sliding doors missing. No rear or side panels.
Note - Items seen on and in Workbench are NOT Included.
Antique Vintage Benchtop Metal Punch
Skylarc Ref G117466
Expected Auction End Time: 4th August 2020 8:33pm
Antique Vintage Benchtop Metal Punch.
Unable to find any visible manufacturer name or model number.
Heavy 32kg weight.
Appears to originally have had a black finish with gold pin striping, see photos.
Includes assorted punch attachments within a much newer MDF case.
Assortment Of Circlip Pliers (Stahlwille, Will)
Skylarc Ref H117181
Expected Auction End Time: 3rd August 2020 9:13pm
Assortment Of Circlip Pliers (Stahlwille, Will).
1 x Stahlwille - Chrom Vanadium 85 - 165 Straight Circlip Pliers.
1 x Stahlwille - Chrom Vanadium 85 - 165 90° Circlip Pliers.
1 x Siochrome 175 Straight Circlip Pliers.
1 x Will 183/225 Straight Circlip Pliers.
2 x Unknkwn brand circlip pliers. (Red, Yellow).
1 x Knipex Vanadin small 90° circlip pliers
1 x Unknown Noga tool.
Moore Jig Grinder and Accessories
Skylarc Ref K117938
Expected Auction End Time: 2nd August 2020 6:43pm
Model: Moore Jig Grinder No. 3
Table dimensions 280mm x 610mm
Table movement 280mm x 450mm
Spindle to table 315mm max
Grinding wheel capacity 4.76mm - 125mm
Grinding speeds 6700 - 175000 rpm
Main spindle vertical travel 90mm
Wide range of accessories including
Slot grinder
Scope
8000 and 175000 rpm spindles
Positive stop
Sony LG10 Digital read out
Huge range of grinding wheels
Manuals
Single phase
To see a video of this machine running:
https://youtu.be/SWOehZN0ViI
Vintage Heavy Wood Workshop Workbench w/ Record Vice
Skylarc Ref B117461
Expected Auction End Time: 2nd August 2020 9:08pm
Vintage Heavy Wood Workshop Workbench w/ Record Vice.
Thick wood frame with 40mm thick wood board top surface.
Lower storage with sliding doors.
Includes Record brand No. 36 Benchtop vice with 150mm wide Jaws.
Note - All other items seen on and in Workbench are NOT Included.
Workbench shows heavy wear and usage. Lower storage not fully inclosed.
Vintage Wood Workshop Workbench w/ Record Vice
Skylarc Ref Z117459
Expected Auction End Time: 4th August 2020 8:17pm
Vintage Wood Workshop Workbench w/ Record Vice.
Thick wood frame with 40mm thick top boards.
Main work surface 920mm above floor.
Lower storage shelf with sliding door.
Newer upper shelf added to main work surface.
455mm high back board.
Includes a newer Record No. 5 bench vice.
Includes attached Desk lamp.
Note - All other items seen on and around Workbench are NOT Included.
Workbench shows heavy Workshop wear and use.
Fine Sodick EDM Drill
Skylarc Ref I117936
Expected Auction End Time: 2nd August 2020 8:40pm
Model: Fine Sodick K1CN
CNC EDM hole drilling machine
Manufactured 2000
Three phase
Head X axis travel 200mm
Head Y axis travel 300mm
Max workpiece height 250mm
Table dimensions 400mm x 450mm
Runs from floppy disk
Includes cabinet with a wide range of accessories
Wire feed heads 0.3mm - 3mm
Selection of electrodes
Restitivity checker
Collets and guides
Assorted steel blocks
2 new 100 litre drums dielectric fluid
To see a video of this machine running:
https://youtu.be/ujrPLfbOrbQ
Vintage Wood Workshop Workbench
Skylarc Ref X117457
Expected Auction End Time: 2nd August 2020 6:59pm
Vintage Wood Workshop Workbench.
Thick wood frame with 40mm thick wood top.
Lower shelves.
Unit shows heavy wear and use. Some cracks to boards, drill holes in top.
Note - There is NO backboard attached to this specific unit, the green board that is visible behind the Workbench in some photos is attached to another unit (see our other Workbench listings).
Mitutoyo Optical Comparitor
Skylarc Ref Z117927
Expected Auction End Time: 4th August 2020 6:16pm
Model: Mitutoyo PH-350A
Code No 172-101a
Analogue part inspection machine
Wide range of accessories
Centre stages 172-142
Imperial dials
Glass ruler NQ 6962
10 x Lenses
Lens set 20X 172-152
Vertical V blocks 172-140
Small centres
Horizontal B blocks 172-141
Riser blocks 172-143
Plain stage 250 x 150 172-131
Rotary vice 172-144
Angle table 172-171
5 x Lenses 172-150
50 x Lenses 172-153
2 spare bulbs
Industrial Benchtop Drill Press
Skylarc Ref Q117450
Expected Auction End Time: 4th August 2020 7:55pm
Industrial Benchtop Drill Press.
ID label is heavily worn, only able to decipher the bottom of the label which reads "Manufactured under licence GEC" Unable to verify the manufacturer, model or motor specs, see photo.
13mm keyed chuck, key included.
Includes 2x drill base Vices, one unit unbranded, second unit is a Record No. 44 drill press vice. No attachment bolts provided with Vices.
Condition - Drill Press shows typical industrial Workshop wear and usage. Unut will be unbolted and removed from tabletop before buyer pickup.
Workshop Magnetic Lifting Block
Skylarc Ref S117452
Expected Auction End Time: 3rd August 2020 6:52pm
Workshop Magnetic Lifting Block.
ID label worn off so Manufacturer, model, and lifting specs are unknown.
Block measures approx 245x120x105mm excluding lever and top eyeloop.
Magnetic function is operating.
Workshop Magnetic Broom Sweeper
Skylarc Ref N117447
Expected Auction End Time: 2nd August 2020 9:26pm
Workshop Magnetic Broom Sweeper for picking up Steel pieces from workshop floor.
210mm diameter wheels.
Magnetic plate approx 515mm in width.
Total unit width approx 650mm.
Lever for releasing picked up scrap.
Handle length approx 1150mm.
Condition - Shows typical workshop wear and usage. One wheel is a bit out of alignment.
Industrial Benchtop Drill Press by JS Richardson & Co
Skylarc Ref R117451
Expected Auction End Time: 4th August 2020 7:55pm
Industrial Benchtop Drill Press.
Made in Australia by JS Richardson & Co.
Model No. E39.
Single phase electric motor.
13mm keyed chuck, key included.
Drilling material base approx 260x240mm.
Drill unit by itself is approx 1040mm tall.
Drill is bolted to a heavy Steel table with a approx 9mm thick plate steel top. Table is approx 660x585x760mm.
Drill unit can be unbolted from table for pickup.
Condition - Older model unit showing moderate wear and usage.
2x Vintage Precision Engineering Set Square Tools
Skylarc Ref L117445
Expected Auction End Time: 3rd August 2020 7:19pm
2x Vintage Precision Engineering Set Square Tools.
Includes:
- Chesterman Sheffield No. 1970 set Square with wood case. Square is approx 670x363mm.
- Rabone Chesterman No. 9/12"/30 CM BSS 939. Square is approx 350x212mm.
Both units Made in England.
Wood case shows wear from age and use.
Coordinate Measuring Machine
Skylarc Ref S117920
Expected Auction End Time: 2nd August 2020 8:17pm
Model: Brown and Sharpe Microval 3+ Coordinate Measuring Machine
Renishaw CMM Touch Trigger Probe System
Various probe tips and accessories
Collet set and tooling
Manuals
Computer and software
Granite worktop 610mm x 457mm x 80mm thick
X axis travel 356mm
Y axis travel 406mm
Z axis travel 305mm
Max workpiece height 381mm
Travel stabilisation frames
Printer
Toolbox
To see a video of this machine operating:
https://www.youtube.com/watch?v=WAXWoniLrSs&feature=youtu.be
Heavy Steel Workshop Scrap Metal Bin
Skylarc Ref O117448
Expected Auction End Time: 2nd August 2020 7:21pm
Heavy Steel Workshop Scrap Metal Bin.
Fork Liftable from all sides.
Inner dimensions of bin is approx 1095mm long, 665mm wide, 900mm high.
Bin is hinged at one end for dumping.
Note - Scrap metal seen in bin in photos will be removed before buyer pickup.
Condition - Some rust to surfaces. Bottom Support bar is bent at one end.
Heavy Steel Workshop Storage Shelving Rack Unit
Skylarc Ref M117446
Expected Auction End Time: 3rd August 2020 9:11pm
Heavy Steel Workshop Storage Shelving Rack Unit.
Unit appears custom built from heavy steel lengths, see photos.
Appears to be bolted together with large Allen key type bolts.
Note - Items seen in photos and under rack are NOT Included.
Note - Buyer will need a large trailer/truck to remove rack, or bring appropriate sized allen keys and mallets to dissasrnble themselves.
Industrial Mobile Bin Trolley w/1x Steel Material Storage Bin & Lifting Unit
Skylarc Ref K117444
Expected Auction End Time: 3rd August 2020 7:19pm
Industrial Mobile Bin Trolley w/1x Steel Material Storage Bin & Lifting Unit.
Heavy duty steel frame finished in yellow
140mm diameter heavy Duty Castors.
Trolley is approx 550mm long, 620mm wide, 410mm tall.
Side bars extend above frame to serve as pins for holding the Included material storage bin.
Storage Bin is approx 630mm long, 550mm wide, 390mm high.
One side panel of bin slides off for dumping contents, etc.
Auction also includes custom built lifting apparatus for lifting these bins with a chain hoist etc.
Condition - All units show moderate workshop wear and use.
Note - See our other listings for group auctions of more bins compatible with this trolley and lifter.
Industrial Mobile Bin Trolley w/1x Steel Material Storage Bin
Skylarc Ref J117443
Expected Auction End Time: 2nd August 2020 7:06pm
Industrial Mobile Bin Trolley w/1x Steel Material Storage Bin.
Heavy duty steel frame finished in yellow
140mm diameter heavy Duty Castors.
Trolley is approx 730mm long, 525mm wide, 460mm tall.
Includes removable pull/push handle.
Black bars added to frame to serve as pins for holding the Included material storage bin.
Storage Bin is approx 630mm long, 550mm wide, 390mm high.
One side panel of bin slides off for dumping contents, etc.
Condition - Both units show moderate workshop wear and use.
Note - See our other listings for group auctions of more bins compatible with this trolley.
Acetylene Welding Regulators, w/ Comet 3 Welding Torch
Skylarc Ref I117442
Expected Auction End Time: 3rd August 2020 9:59pm
Acetylene Welding Regulators, w/ Comet 3 Welding Torch.
Includes:
- BOC Comet 3 torch.
- NZIG Oxygen regulator.
- NZIG Acetalene regulator.
- 2x Spark making units.
- small wrench.
- length of welding hose.
Industrial Mobile Bin Trolley w/1x Steel Material Storage Bin
Skylarc Ref H117441
Expected Auction End Time: 3rd August 2020 8:25pm
Industrial Mobile Bin Trolley w/1x Steel Material Storage Bin.
Heavy duty steel frame finished in yellow
140mm diameter heavy Duty Castors.
Trolley is approx 550mm long, 620mm wide, 410mm tall.
Side bars extend above frame to serve as pins for holding the Included material storage bin.
Storage Bin is approx 630mm long, 550mm wide, 390mm high.
One side panel of bin slides off for dumping contents, etc.
Condition - Both units show moderate workshop wear and use.
Note - See our other listings for group auctions of more bins compatible with this trolley.
Custom Built Workshop Storage Bin Fork Jack
Skylarc Ref F117439
Expected Auction End Time: 4th August 2020 6:01pm
Custom Built Workshop Storage Bin Fork Jack.
Custom built in-house for moving small steel material storage bins.
Forks are approx 565mm long and 50mm wide.
Spacing between forks is approx 340mm.
Lifting height from approx 40mn when lowered to approx 80-120mm (angled) when raised.
Gap between side wheels franes is approx 730mm.
Note - last image showing a small bin being lifted is just for reference only, bin is NOT included.
See our other listings for group auctions of compatible steel bins.
Custom Built Workshop Storage Bin Fork Jack
Skylarc Ref E117438
Expected Auction End Time: 4th August 2020 7:25pm
Custom Built Workshop Storage Bin Fork Jack.
Custom built in-house for moving small steel material storage bins.
Forks are approx 565mm long and 50mm wide.
Spacing between forks is approx 340mm.
Lifting height from approx 40mn when lowered to approx 80-120mm (angled) when raised.
Gap between side wheels franes is approx 730mm.
Note - last image showing a small bin being lifted is just for reference only, bin is NOT included.
See our other listings for group auctions of compatible steel bins.
6x Heavy Duty Steel Workshop Stackable Storage Bins
Skylarc Ref D117437
Expected Auction End Time: 2nd August 2020 9:22pm
6x Heavy Duty Steel Workshop Stackable Storage Bins.
Total dimensions for each unit is approx 640x570x420mm.
Inner storage area of each is approx 570x490x305mm.
Each unit has a removable side panel for dumping contents, etc.
Stackable design, see photos.
Condition - All six units show moderate wear and use. Some rusting and denting.
6x Heavy Duty Steel Workshop Stackable Storage Bins
Skylarc Ref C117436
Expected Auction End Time: 4th August 2020 8:57pm
6x Heavy Duty Steel Workshop Stackable Storage Bins.
Total dimensions for each unit is approx 640x570x420mm.
Inner storage area of each is approx 570x490x305mm.
Each unit has a removable side panel for dumping contents, etc.
Stackable design, see photos.
Condition - All six units show moderate wear and usage. Denting and some surface rusting.
6x Heavy Duty Steel Workshop Stackable Storage Bins
Skylarc Ref B117435
Expected Auction End Time: 2nd August 2020 8:31pm
6x Heavy Duty Steel Workshop Stackable Storage Bins.
Total dimensions for each unit is approx 640x570x420mm.
Inner storage area of each is approx 570x490x305mm.
Each unit has a removable side panel for dumping contents, etc.
Stackable design, see photos.
Condition - All six units show moderate surface rusting.
6x Heavy Duty Steel Workshop Stackable Storage Bins
Skylarc Ref A117434
Expected Auction End Time: 3rd August 2020 7:44pm
6x Heavy Duty Steel Workshop Stackable Storage Bins.
Total dimensions for each unit is approx 640x570x420mm.
Inner storage area of each is approx 570x490x305mm.
Each unit has a removable side for dumping contents, etc.
Stackable design, see photos.
Condition - All six units show moderate surface rusting.
Heavy Steel Workshop Cart Trolley
Skylarc Ref Z117433
Expected Auction End Time: 2nd August 2020 9:36pm
Heavy Steel Workshop Cart Trolley.
190mm heavy Duty Castors.
Heavy steel frame with approx 6mm thick plate steel top surface.
No handle attached or included but one end has bolts and bracket for buyer to attach one.
Condition - Shows typical workshop wear and grime. Some grease on surfaces. Some surface rust.
Heavy Steel Workshop Cart Trolley
Skylarc Ref Y117432
Expected Auction End Time: 4th August 2020 6:54pm
Heavy Steel Workshop Cart Trolley.
190mm heavy Duty Castors.
Heavy steel frame with approx 7mm thick plate steel top surface.
No handle attached or included but one end has bolts and bracket for buyer to attach one.
Note - Items seen in photos on trolley are NOT Included.
Condition - Shows typical workshop wear and grime. Some grease on surfaces.
Heavy Steel Workshop Cart Trolley
Skylarc Ref X117431
Expected Auction End Time: 2nd August 2020 8:04pm
Heavy Steel Workshop Cart Trolley.
190mm heavy Duty Castors.
Heavy steel frame with plate steel top surface.
No handle attached or included but one end has bolts and bracket for buyer to attach one.
Condition - Shows typical workshop wear and grime. Some grease on surfaces.
Heavy Steel Workshop Material Storage Rack Shelving Unit
Skylarc Ref W117430
Expected Auction End Time: 2nd August 2020 7:00pm
Heavy Steel Workshop Material Storage Rack Shelving Unit.
9x shelves each approx 1100mm long, 490mm wide.
Note - Items seen on and around rack are NOT Included!
Condition - Rusty surfaces.
Workshop Wall Mounted Air Hose Reel by AK Reels
Skylarc Ref V117429
Expected Auction End Time: 2nd August 2020 7:53pm
Workshop Wall Mounted Air Hose Reel by AK Reels.
Unknown model number.
Made in Australia.
Unknown hose length.
Includes attached air gun nozzle, see photos.
Unit will be unmounted from wall before buyer pickup.
Remington Power 220,000btu Kerosene Diesel Heater
Skylarc Ref P117423
Expected Auction End Time: 3rd August 2020 9:02pm
Remington Power 220,000btu Kerosene Diesel Heater.
Model No. Silent Drive RPH22050PV
220,000 btu output.
49L tank capacity.
Uses Kerosene or diesel fuels.
Digital temperature control.
Digital hour counter reads 11 hours of usage.
Includes operation manual.
Condition - Shows light use matks. Operates normally.
Recoila Workshop Wall Mounted Air Hose Reel
Skylarc Ref S117426
Expected Auction End Time: 2nd August 2020 9:52pm
Recoila Workshop Wall Mounted Air Hose Reel.
Part No. AW1020.
Manufactured 2005
Unknown hose length.
Casing is approx 500mm diameter and 200mm wide.
Also includes attached air spray nozzle with orange hose line.
Unit will be removed from wall before buyer pickup.
Condition - Unit shows typical workshop usage and wear.
Remington Power 220,000btu Kerosene Diesel Heater, Faulty
Skylarc Ref Q117424
Expected Auction End Time: 4th August 2020 7:35pm
Remington Power 220,000btu Kerosene Diesel Heater, Faulty.
Model No. Silent Drive RPH22050PV
220,000 btu output.
49L tank capacity.
Uses Kerosene or diesel fuels.
Digital temperature control.
Digital hour counter reads 103 hours of usage.
Includes operation manual.
Condition - Shows light use marks on exterior. Internal error fail code E1 on digital display. Lockout rag states possible contaminated fuel, see photo.
Ullrich 850mm Double Sided Aluminium Step Ladder
Skylarc Ref R117425
Expected Auction End Time: 2nd August 2020 9:08pm
Ullrich 850mm Double Sided Aluminium Step Ladder.
Unknown model number and weight capacity.
Made in Dunedin.
Steps on both sides.
850mm height when opened.
Unit shows typical workshop wear and grime.
Remington Power 220,000btu Kerosene Diesel Heater
Skylarc Ref O117422
Expected Auction End Time: 2nd August 2020 6:18pm
Remington Power 220,000btu Kerosene Diesel Heater.
Model No. RPH22050PV
220,000 btu output.
49L tank capacity.
Uses Kerosene or diesel fuels.
Digital temperature control.
Digital hour counter reads 50 hours of usage.
Includes operation manual.
Condition - Shows light use matks. Operates normally.
Electric Die Grinder Kit
Skylarc Ref C117176
Expected Auction End Time: 3rd August 2020 7:52pm
Electric Die Grinder Kit.
Fuller branded 230-240V 50Hz - 130W (8000-30000tr/min) rotary tool/die grinder.
Blue plastic carrying case (note the case is slightly damaged).
Assorted die grinder pieces (see photos)
Macnaught Retracta Workshop Wall Mounted Retractable Hose Reel
Skylarc Ref N117421
Expected Auction End Time: 4th August 2020 6:17pm
Macnaught Retracta Workshop Wall Mounted Retractable Hose Reel.
Made in Australia.
Model number unknown.
Max pressure 17 bar, 1.6MPa, 250psi.
Hose length Unknown.
Casing approx 450mm diameter, 240mm wide.
Unit will be dismounted from wall before buyer pickup.
Industrial Bench Grinder w/ Steel Stand
Skylarc Ref L117419
Expected Auction End Time: 3rd August 2020 8:20pm
Industrial Bench Grinder w/ Steel Stand.
Unable to see a manufacturer and model number on the heavily worn label, see photo. Am able to decipher the words "Made in England" as well as "Ball Bearings" and a large number "7".
2800rpm.
Single phase.
Grinding wheel size is approx 150mm diameter.
Includes a heavy Steel stand with a cooling tray. Stand is approx 535mm long, 405mm wide, 810mm high.
Condition - Grinder and stand show moderate wear from workshop usage. Protective screens are missing over each Grinding wheel.
6x Workshop Welding Screens
Skylarc Ref M117420
Expected Auction End Time: 2nd August 2020 8:16pm
6x Workshop Welding Screens.
Four units with the semi transparent plastic welding sheeting.
Two units with sheet metal panels.
Steel frames.
All units are about similar size with lengths varying from approx 1170mm to 1240mm, widths at feet 600mm to 620mm, and heights from 1820mm to 1885mm.
Condition - Varies with each unit. Green plastic sheet unit appears good condition, red sheet units have modeate wear and tears, metal sheet units show dents and marks. All frames show rust.
2x Rolls of Cold Rolled Steel Strips, 3x75mm Size
Skylarc Ref K117418
Expected Auction End Time: 2nd August 2020 7:29pm
2x Rolls of Cold Rolled Steel Strips.
AHD-635
3mm thick, 75mm wide, length of each roll unknown.
Cold Rolled NZCC SD.
Approx 400kg total weight.
Material ID labels attached.
Condition - New unused workshop material stock.
Heavy Steel Material Storage Rack Unit
Skylarc Ref J117417
Expected Auction End Time: 2nd August 2020 6:12pm
Heavy Steel Material Storage Rack Unit.
Includes 6x removable sheet steel shelves.
Auction includes storage rack unit only, all other items seen on and around unit are NOT Included.
Condition - Unit shows moderate surface rusting from outdoor exposure. Some bent frame bars.
Kerric Soteco Heavy Duty Workshop Shopvac Vacuum, motor fault
Skylarc Ref I117416
Expected Auction End Time: 4th August 2020 8:09pm
Kerrick Soteco Heavy Duty Workshop Shopvac Vacuum, motor fault
Type No. WDL3
Europa 423.
2600W max.
Tank capacity unknown, measures approx 400x400x550mm.
Note - Hose and attachments are missing so therefore NOT included.
Note - Interior motor filter is missing, see photos. Vacuum has not been tested as we do not want to risk damaging the motor without a filter.
Condition - Unit shows heavy industrial Workshop wear and use. Fault in one internal motor, will need servicing.
Large Mobile Workshop Shopvac Vacuum
Skylarc Ref H117415
Expected Auction End Time: 2nd August 2020 7:03pm
Large Mobile Workshop Shopvac Vacuum.
ID labels are missing on unit so manufacturer and model are unknown.
Blue plastic tank body approx 410x410x560mm in size.
Mounted on Castors.
Apoeare to be a drain hose attached to bottom, see photos, so unit likely wetor dry usage.
Includes suction hose and 880mm long hard tube attachment, no other end attachments included.
Condition - Unit shows heavy industrial Workshop use and wear, see photos. Appears to operate.
Large Lot of Adjustable Reamers
Skylarc Ref X117197
Expected Auction End Time: 3rd August 2020 8:20pm
23 x adjustable reamers
Sizes include
23.75mm - 27mm
21.5mm - 23.75mm
25/32" - 27/32"
19.75mm - 21.5mm
21/32" - 23/32"
19.25mm - 19.75mm
23/32" - 25/32"
16 x assorted small reamers
Screw on extension pilots
Assorted nuts and accessories
Heavy Steel Workshop Cart Trolley
Skylarc Ref G117414
Expected Auction End Time: 4th August 2020 8:41pm
Heavy Steel Workshop Cart Trolley.
190mm heavy Duty Castors.
Heavy steel frame with plate steel top surface.
No handle attached or uncluded but one end has bolts and bracket for buyer to attach one.
Note - Auction is for trolley unit only, other items seen in photos sitting on and within unit are NOT included.
Condition - Shows typical workshop wear and grime. Some grease on surfaces.
Heavy Steel Workshop Cart Trolley
Skylarc Ref F117413
Expected Auction End Time: 3rd August 2020 7:01pm
Heavy Steel Workshop Cart Trolley.
190mm heavy Duty Castors.
Heavy steel frame with plate steel top surface.
No handle attached or uncluded but one end has bolts and bracket for buyer to attach one.
Note - Auction is for trolley unit only, large item seen sitting on unit in photos is NOT included.
Condition - Shows typical workshop wear and grime. Some grease on surfaces.
Heavy Steel Workshop Cart Trolley
Skylarc Ref E117412
Expected Auction End Time: 2nd August 2020 9:08pm
Heavy Steel Workshop Cart Trolley.
190mm heavy Duty Castors.
Heavy steel frame with plate steel top surface.
No handle attached or uncluded but one end has bolts and bracket for buyer to attach one.
Note - Auction is for trolley unit only, large item seen sitting on unit in photos is NOT included.
Condition - Shows typical workshop wear and grime. Some grease on surfaces.
Hafco Mobile Girder Rail, 1000kg Capacity
Skylarc Ref D117411
Expected Auction End Time: 4th August 2020 6:46pm
Hafco Mobile Girder Rail, 1000kg Capacity.
Adjustable height gantry from 2500 - 3600mm.
Mounted on Castors.
2300mm inside frame clearance.
Purchased from www.machineryhouse.co.nz in 2019.
Includes Assembly manual.
Note - Auction includes mobile Girder Rail unit and attached trolley only, the Chain hoist block and other items seen hanging from and located under unit are NOT Included.
Heavy Duty Narrow Pallet Racking Type Shelf Unit
Skylarc Ref C117410
Expected Auction End Time: 4th August 2020 8:22pm
Heavy Duty Narrow Pallet Racking Type Shelf Unit.
Unknown manufacturer.
8x orange horizontal beams each approx 2740mm long, 80mm wide.
4x vertical frames each approx 465mm wide, 1835mm tall. Note - two of these vertical frames are unused spares, see last photo.
4x 25mm thick MDF boards each approx 2740mm long, 405mm wide.
Note - Auction is for Shelving Rack unit only, all other items seen on and around unit in photos are NOT included.
5x Assorted Type Workshop Clamps
Skylarc Ref B117409
Expected Auction End Time: 3rd August 2020 7:40pm
5x Assorted Type Workshop Clamps.
Includes:
- 2x Carver clamps each approx 300m working length, 150mm working width, made in England.
- 1x Bessey clamp, approx 300mm working length, 125mm working width, made in Germany.
- 2x clamps marked as Made in Germany, unknown brand, both have 100mm working width, one is approx 1000mm long, other approx 300mm long.
Condition varies with each unit.
Assorted Lot of Milling Index Tips w/ 25-Drawer Storage Unit
Skylarc Ref N117291
Expected Auction End Time: 3rd August 2020 8:06pm
Assorted Lot of Milling Index Tips w/ 25-Drawer Storage Unit.
Brands include Sandvik Coromant, Kennametal, Iscar, TaeguTech, Valenite.
Assorted sizes/types, some cases without labels, some loose in bins.
Condition varies with each unit. Some index pieces are new and sealed in cases, some cases are partials, some index units appear used.
Assorted Workshop Consumables
Skylarc Ref B117175
Expected Auction End Time: 4th August 2020 7:30pm
Assortment of Workshop Consumables.
20+ individual items including but not limited to:
9 x Rapid Tap cutting fluid, k80 lock fast resin, eporez egs resin, milacron rz20, eporez egs hardener, copper sulfate, k80 hardener etc.
Note a lot of these are used (not full/new).
Cannot Ship due to dangerous goods.
Mitutoyo 192 Series Digimatic Height Gage
Skylarc Ref O117292
Expected Auction End Time: 4th August 2020 9:22pm
Mitutoyo 192 Series Digimatic Height Gage.
Code No. 192-661
0-600mm range.
Uses 3x AA size batteries.
Includes operation manual and plastic cover.
Condition - Gage appears yo operate normslly but not tested for accuracy. Gage shows generally minor use and wear marks. Plastic cover shows more moderate wear.
Large Assortment of Workshop Consumables
Skylarc Ref A117174
Expected Auction End Time: 3rd August 2020 8:46pm
Large Assortment of Workshop Consumables.
50+ individual items including but not limited to:
Metal cutting liquid, metal polish, solving fluid, adhesive, rust protection, cleaner, girnding paste, threadlocker, thinner, lubricants and much more.
Note alot of these are used (not full/new).
Cannot Ship due to dangerous goods.
Large Lot of Long Series Drill Bits
Skylarc Ref M118382
Expected Auction End Time: 4th August 2020 7:33pm
Approx 45 drills total
Includes
Titex plus HSS UFL 12mm 480mm long
Sutton 6.5mm 350mm long
Evacut 12mm 300mm long
Sutton 6mm 260mm long
Sutton 6mm 330mm long
2 x Sutton 6mm 225mm long
Evacut 10mm 250mm long
Wide range of other assorted long drills
Assorted Grease Guns/Grease Tubes and Dispenser Guns
Skylarc Ref X117171
Expected Auction End Time: 4th August 2020 6:50pm
Assorted Grease Guns/Grease Tubes and Dispenser Guns.
5 x Assorted Sized/Branded Grease Guns.
9 x New Castril Molub-Alloy 6040/460-1 1/2 Calcium Complez Grease.
2 x Tube Dispenser Guns.
Lot of Assorted Rubber Mallets
Skylarc Ref U117168
Expected Auction End Time: 2nd August 2020 7:16pm
Lot of Assorted Rubber Mallets.
7 various mallets and a hammer.
Brands and Designations
Sunnex x2, Blue-Point BC4A x 1, Snap-On HBFE56 56oz/1550 x 2, Snap-On HBFE32 32oz/900 x 1 and Generic 4LB Black Smith hammer.
See photos for more details.
Dayton Press Punches and Accessories
Skylarc Ref C118372
Expected Auction End Time: 4th August 2020 8:37pm
24 assorted punches
7 x HBP62-300
2 x HBP75-300
4 x appear to have been ground down to 4mm tips
2 x 1-1222 85-1
BLC50x23/4x.315
BLO50x23/4x.39x748
BLc50x23/4x.472
2 x DPA13 2162 P 13.000 XL.50.00
Assorted bags of bolts
Tool Holder ER 50 Type w/ Sandvik Milling Attachment
Skylarc Ref F117257
Expected Auction End Time: 2nd August 2020 7:39pm
Tool Holder ER 50 Type w/ Sandvik Milling Attachment.
Unable to find a by ID markings on tool Holder so manufacturer and type is unknown, see photos for type details.
Includes attachment Sandvik R390-080027-17L, Dc=80mm, 873463.
4 Sets of Imperial Steel Marking Sets
Skylarc Ref I117156
Expected Auction End Time: 3rd August 2020 6:49pm
4 Sets of Imperial Steel Marking Sets.
1 x 9 peice 3.175mm (⅛") number marking set (0 - 8)
1 x 20/27 peice 5mm incomplete (missing: a, b, d, e, f, n, p) letter marking set.
1 x 26/27 peice 3mm incomplete (missing: n) letter marking set.
1 x 27 peice 1.5mm complete letter marking set.
Erickson DV50BEM40110M Tool Holder w/ Large Attachment
Skylarc Ref Y117250
Expected Auction End Time: 2nd August 2020 6:53pm
Erickson DV50BEM40110M Tool Holder.
Includes a large attachment with no visible ID stamps so Unknown brand/model. Attachment is approx 180mm long, 46mm diameter.
See photos for more type details.
Double Sided Hardware Storage Bin Rack w/ Supplies
Skylarc Ref I117234
Expected Auction End Time: 3rd August 2020 7:08pm
Double Sided Hardware Storage Bin Rack w/ Supplies.
Older side has 100x steel bins each approx 230x100x75mm. Some of these hold various springs, akken key type bolts, and more, many are empty as well.
Newer added on side has 120+ green plastic bins by Lsmdon in Size 5 and Size 6 versions. Most of these are filled with various new Washers, Allen key type bolts, steel pins, nuts, and more.
Main rack height is approx 470mm with an extension for a sign that rises to approx 1950mm.
Mitutoyo 11-Piece Micrometer Gage Set, 25-300mm Range
Skylarc Ref F117231
Expected Auction End Time: 2nd August 2020 7:59pm
Mitutoyo 11-Piece Micrometer Gage Set, 25-300mm Range.
Made in Japan.
Eleven Micrometers covering the 25mm to 300mm range.
Missing 0-25mm micrometer.
Includes wood case.
Condition - Micrometers and case show wear and use from workshop environment.
4 x Imperial Steel Marking Stamp Sets
Skylarc Ref J117157
Expected Auction End Time: 3rd August 2020 7:35pm
4 x Imperial Steel Marking Stamp Sets.
1 x Complete Number Stamp Set (0 - 8) 6mm.
1 x Complete Alphabet Stamp Set (A - Z&) 6mm.
1 x Partial Alphabet Staml Set (missing: b, e, k, p) mm.
1 x Assorted Set (Includes: F, S, U , T, X, V, W, Y, N, E , P, &) Various Sizes.
Heavy Steel Workshop Cart Trolley
Skylarc Ref P117241
Expected Auction End Time: 3rd August 2020 9:55pm
Heavy Steel Workshop Cart Trolley.
190mm heavy Duty Castors.
Heavy steel frame with plate steel top surface.
No handle attached or uncluded but one end has bolts and bracket for buyer to attach one.
Condition - Shows typical workshop wear and grime. Some grease on surfaces.
Toledo Benchtop Scale
Skylarc Ref E117230
Expected Auction End Time: 2nd August 2020 8:00pm
Toledo Benchtop Scale.
Model No. 8582.
Metric and Imperial outputs.
Top weigh plate approx 370x275mm.
Condition - Unit shows heavy industrial wear and usage. Digital display is very dim and hard to read. Appears to be operating but has not been tested for accuracy.
CP (Chicago Pneumatic) CP-860R Air Grinder
Skylarc Ref W117144
Expected Auction End Time: 4th August 2020 7:37pm
CP (Chicago Pneumatic) CP-860R Air Grinder.
Flex-collet chuck for 4" shank burrs and 22,000 RPM rated mounted stones.
Quiet rear exhaust. Only 84 dBA.
With facility to attach 78 dBA sound reducing hose.
FAST AND POWERFUL. 72 hp motor develops 22,000 RPM.
VERSATILE. Works well on metal, rubber & other materials.
COMPACT. 1¼ Lbs. and 5¾" long.
AND Benchtop Scale w/ Large Floor Weigh Pad & Stand
Skylarc Ref H117233
Expected Auction End Time: 4th August 2020 8:27pm
AND Benchtop Scale w/ Large Floor Weigh Pad & Stand.
Includes:
-AND model FC-20K Benchtop Scale with 20kg capacity with 310x265mm weigh surface, digital controls.
- Unknown brand/model of heavy Duty floor weigh plate form with 1500kg max capacity, 1200x1200mm weigh surface, 140mm above floor.
- Heavy steel blue stand included, 1090mm high, 390x390mm top surface, thick solid steel base 610x405x50mm.
- Assorted power and control Cabling.
_User manual for small scale.
Condition - All items show Workshop wear and usage. Both small and remote large scales are operating but not tested for accuracy. Both may benefit from a clean.
Assorted Small Part Kits (Circlips, Speed Nuts Woodruff Keys and Springs)
Skylarc Ref D117125
Expected Auction End Time: 4th August 2020 8:15pm
Assorted Small Part Kits (Circlips, Speed Nuts Woodruff Keys and Springs).
1 x Automotive Products Kit of assorted Springs.
1 x Automotive Products Kit of various sized Woodruff Keys.
1 x Visipack VP4 Kit of various sized Anderton Circlips Type 1400 External.
1 x Gee Jay Motor Products Kit of various sized Spure Speed Nuts.
Please see photos for specified sizes and basic idea of qtys.
Assorted Small Part Kits (Washers, Screws and Springs)
Skylarc Ref C117124
Expected Auction End Time: 3rd August 2020 9:36pm
Assorted Small Part Kits (Washers, Screws and Springs).
1 x Automotive Products Kit of various sized Drain Plug Washers.
1 x Automotive Products Kit of various sized Carburettor Fibre Washers.
1 x Automotive Products Kit of various sized Self Tapping Screws.
1 x Automotive Products Kit of various sized Compression Springs.
Please see photos for specified sizes and basic idea of qtys.
Bosch GWS 24-180 LVI Professional Angle Grinder
Skylarc Ref L117133
Expected Auction End Time: 2nd August 2020 8:38pm
Bosch GWS 24-180 LVI Professional Angle Grinder.
Rated input power 2,400.
W No-load speed 8,500 rpm.
Grinding spindle thread M 14.
Main handle Bow (rotating).
Disc diameter 180 mm Weight 5.4 kg.
Switch Protection.
BT Lifter Pallet Jack
Skylarc Ref G117232
Expected Auction End Time: 2nd August 2020 8:22pm
BT Lifter Pallet Jack.
Made in Sweden.
Model No. L2000/11
Lifting capacity 2000kg.
910mm long forks
155mm fork width with 375mm gap between each fork.
685mm total unit width.
Fork height from approx 85mm up to approx 200mm.
Condition - Unit shows typical workshop wear and usage.
Starrett Surface Roughness Tester
Skylarc Ref D117229
Expected Auction End Time: 4th August 2020 9:14pm
Starrett Surface Roughness Tester.
Model No. 3800.
Invludes power cable, instruction manual, test surface and case.
Condition - Unit powers on and appears to operate but digital display seems to have a faulty section as some numbers do not fully display, see photos. Otherwise unit appears in good condition. Case exterior shows wear.
Mitutoyo Surftest 201 Series 178 Surface Roughness Tester
Skylarc Ref C117228
Expected Auction End Time: 4th August 2020 9:39pm
Mitutoyo Surftest 201 Series 178 Surface Roughness Tester.
Includes:
- Main unit code No. 178-931E.
- Read Head Gauge code No. 2007.
- operation manual.
- case of surface finish reference standards.
- partial case of Assorted other related items, see photos.
Protective case cover for main unit and read head.
Condition - Powers on and runs but have been told by staff that it has a faulty wire in read head, will require servicing. Also print ribbon is expended and needs replacing. Second included ribbon appears used.
Insize Digital Caliper + 2x Insize Micrometers
Skylarc Ref Y117224
Expected Auction End Time: 4th August 2020 9:27pm
Insize Digital Caliper + 2x Insize Micrometers.
All Insize branded.
Includes:
- 150mm digital caliper model 1108-150.
- 2x 0-25mm Micrometers, both model 3203-25A.
All include plastic cases.
Cases show exterior Workshop grime and wear.
Vernier Height Gauge by Chesterman
Skylarc Ref X117223
Expected Auction End Time: 3rd August 2020 9:47pm
Vernier Height Gauge by Chester man.
Made in England.
Model No. 369.
36cm max metric height, 14.5 inches max Imperial height.
Includes wood case and attachments, see photos.
Case exterior shows Workshop Storage wear.
Assorted Precision Squares & Straight Edge
Skylarc Ref V117221
Expected Auction End Time: 2nd August 2020 8:20pm
Assorted Precision Squares & Straight Edge.
Includes:
- Preisser Germany DIN 875/00 Square 300x200mm.
- Preisser Germany DIN 874 straight edge 400mm length.
- Bocchi DIN 875/00 Square 75x50mm.
Each includes wood case.
Cases show wear and grime from workshop toolroom storage. Tools in fine condition.
4x Industrial Radius Gage Sets
Skylarc Ref O117214
Expected Auction End Time: 3rd August 2020 7:34pm
4x Industrial Radius Gage Sets.
Unknown manufacturer for both units.
2x blue case Metric sets of 0.5mm to 13mm.
2x clear case imperial sets, one of 1/32 to 3/8 and one of 5/32 to 1/2.
Condition - cases show wear from workshop tool room. Gages appear good. One set is missing a Gage as marked on case.
2x Sets of Mitutoyo Internal Micrometers, 25-300mm Range
Skylarc Ref S117218
Expected Auction End Time: 2nd August 2020 8:41pm
2x Sets of Mitutoyo Internal Micrometers, 25-300mm Range.
Made in Japan.
Includes:
- internal micrometer set with 25-50mm range.
- internal micrometer set with 50-300mm range.
Both have wooden cases.
Condition - Exterior of cases show Workshop toolroom storage wear, dust. Components inside are fine Condition. Each set msy be missing a piece or two, see photos.
UHT TurboLap TLL-07 Pneumatic Lapping Tool Kit
Skylarc Ref P117137
Expected Auction End Time: 2nd August 2020 7:33pm
UHT TurboLap TLL-07 Pneumatic Lapping Tool Kit.
Includes UHT Turbolap TLL-07 Air Lapping Tool and Air Regulator. Also other miscellaneous pieces.
Lapping tool features:
For polishing molds
Easy-grip rubber cover designed to reduce fatigue
Super Collet that holds the abrasive stone tight
The 0.7 mm standard stroke works for all-around operations
Includes hose with coupler to be ready for use on the spot
Uryu UMG450 Pneumatic Die Grinder Set
Skylarc Ref N117135
Expected Auction End Time: 3rd August 2020 6:48pm
Uryu UMG450 Pneumatic Die Grinder Set.
Die grinder comes with various assorted attachments/pieces.
Made in Japan.
For full specifications please see the PDF link below:
https://www.google.com/url?sa=t&source=web&rct=j&url=http://www.uryu.co.jp/english/webcatalog/pdf/57.pdf&ved=2ahUKEwiDh8j48KzqAhVIwjgGHUqDCdgQFjABegQIBBAB&usg=AOvVaw1aCvM5ECftEiUr1WvemgOF
Mettler BB244 DeltaRange BasBal Digital Scale
Skylarc Ref N117213
Expected Auction End Time: 4th August 2020 6:33pm
Mettler BB244 DeltaRange BasBal Digital Scale.
Made in Switzerland by Mettler Toledo AG.
Model No. BB244.
100mm diameter weighing platform.
Condition - Protective plastic cover shows yellowing and wear from use. Scale itself shows few minor marks. Accuracy not tested.
100cm Analog Caliper w/ Case
Skylarc Ref K117210
Expected Auction End Time: 2nd August 2020 6:12pm
100cm Analog Caliper w/ Case.
Unknown manufacturer.
Metric scale to 100cm at 0.02mm increments.
Imperial scale to 40 inches.
Includes wood case.
Condition - Caliper shows light signs of use. Case shows scratches and wear from workshop tool room storage
46x Piece Tap & Die Set in Wood Case
Skylarc Ref G117206
Expected Auction End Time: 2nd August 2020 6:58pm
46x Piece Tap & Die Set in Wood Case.
Unsure of brand, many items are marked with GRD.THD England, a few other items have other brand markings.
Assorted metric sizes.
Longest unit is approx 545mm in length.
Some items show use while others appear unused. Wood case shows wear. Age of set is unknown.
Makita 4304T Top Handle, Orbital, Variable Speed Jig Saw
Skylarc Ref J117131
Expected Auction End Time: 4th August 2020 6:57pm
Makita 4304T Top Handle, Orbital, Variable Speed Jig Saw.
230-240V, 2.6A, 50-60Hz, 600W.
Use with optional blade (B-16L) allows cutting up to 135mm thickness.
Tool speed can be adjusted between 500 and 3,000 strokes per minute by turning the adjusting dial.
Lock lever is positioned straight up, making for easy use from right or left.
2x Standard Office Tables w/ 8x Assorted Chairs
Skylarc Ref J117209
Expected Auction End Time: 2nd August 2020 7:21pm
2x Standard Office Tables w/ 8x Assorted Chairs.
Includes:
- 2x tables with green laminate tops and black finished legs, each 1370mm long, 760mm wide, 760mm tall.
- 8x Assorted Chairs, see photos for styles included.
Items show wear and use from workshop lunch room.
4 Sets of Assorted Small Parts (Washers, Pins and Circlips)
Skylarc Ref B117123
Expected Auction End Time: 3rd August 2020 7:42pm
Assorted Small Parts (Compression Springs, Grease Nipples, Circlips).
1 x Automotive Products Kit of various sized Red Fibre Washers.
1 x Automotive Products Kit of various sized Taper Pins.
1 x Automotive Products Kit of various sized Circlips.
1 x Automotive Products Kit of various sized Cotter Pins.
Please see photos for specified sizes and basic idea of qtys.
8x Assorted Carbide Tiped Lathe Cutting Turning Tools by Narex & Cintride
Skylarc Ref C117202
Expected Auction End Time: 4th August 2020 8:53pm
8x Assorted Carbide Tiped Lathe Cutting Turning Tools.
Includes:
- 2x Narex DN3716 ISO 6R 20 20 P30 tools.
- 2x Narex DN3716 ISO 6R 16 16 P20 tools.
- 1x Narex S3 25 25 P30 tool.
- 2x Cintride 111/E183/5TR 20x20 tools.
- 1x Cintride 17/E183/5TR 16x16 tool.
Condition - All appear to be unused leftover Workshop stock.
Pryor Steel Type Letter & Figure Marking Kits
Skylarc Ref E117126
Expected Auction End Time: 3rd August 2020 8:00pm
Pryor Steel Type Letter & Figure Marking Kits.
2 x Pryor Marking Technology - Interchangeable Steel Type Letter and Figure Marking Kits.
1 x Size 4 and 1 x Size 3.
See photos for more details.
Note some characters missing.
5x Assorted Lifting Chain Hooks
Skylarc Ref E117204
Expected Auction End Time: 2nd August 2020 9:14pm
5x Assorted Lifting Chain Hooks.
Includes:
- 2x 7/8-8 SY CL AS hooks.
- 1x 1 1/2 hook.
- 1x WLL 3.2T 10-8 3/8 H1.7 hook.
- 1x 10-8 WLL 3.2T hook.
Condition - Varies with each unit. Some show little to no use while others show wear and use.
Assorted Small Parts (Compression Springs, Grease Nipples, Cir-clips)
Skylarc Ref A117122
Expected Auction End Time: 2nd August 2020 6:21pm
Assorted Small Parts (Compression Springs, Grease Nipples, Cir-clips).
1 x Champion Assortment Kit of various sized Cir-clips.
1 x Champion Assortment Kit of various sized Compression Springs.
1 x Champion Assortment Kit of various sized Metric Grease Nipples.
1 x Fastening Supplies Kit of Imperial Grease Nipples.
Please see photos for specified sizes and basic idea of quantities.
