Skylarc

Ab Industries Surplus Plant and Machinery Auction

IBC Tank of Used Oil
IBC Tank of Used Oil

IBC chemical tank of used oil
Approx 2/3rds full

Ingersoll-Rand Compressor
Ingersoll-Rand Compressor

Model: Ingersoll-Rand Type 30
Model 242 compressor
Three phase
Runs well

To see this machine running:
https://youtu.be/MSKPbPz5Zts

Crate of Pulleys
Crate of Pulleys

Crate with Caterpillar and Cummins accessory / fan drive pulleys

Pallet of Air Hose
Pallet of Air Hose

Assorted lengths of pneumatic hose

Oil/Diesel Hand Pumps
Oil/Diesel Hand Pumps

2 x rotary pumps

Garage Door
Garage Door

Tilting garage door

Aluminum Cable Tray
Aluminum Cable Tray

Aluminium conduit / cable tray:
10 lengths x 6m
1 length x 2.6m
1 length x 2m
1 length x 1.8m
1 length x 1.75m

Pallet of Caterpillar Parts
Pallet of Caterpillar Parts

Pallet of assorted Caterpillar and various injection components, including box of EMD injectors

Stainless Steel Tank
Stainless Steel Tank

Pipe in middle
Fill inlet with pipe out side

Stainless Steel Tank
Stainless Steel Tank

Drain hole in bottom
Rear filler port

Pallet of Perkins Diesel Engine Parts
Pallet of Perkins Diesel Engine Parts

FG Wilson Generator Engine Parts
Bearing shells
Gaskets
Lister spares
Box of new Perkins D4.203 parts

Caterpillar 3408 Intercoolers
Caterpillar 3408 Intercoolers

Two intercoolers
One appears new

Pallet of Cummins Diesel Spares
Pallet of Cummins Diesel Spares

New piston liner kits
Exhaust manifold 855
Bearings
Gaskets
New camshafts
New ring sets
Vibration dampers
Oil cooler element
Push rods
And much more

Pallet of Caterpillar Parts
Pallet of Caterpillar Parts

Gears
Air filter tops
Bearing shells
Precleaner
Huge mixed selection of new parts

Pallet of New Cummins Cylinder Kits
Pallet of New Cummins Cylinder Kits

Approx 40 total
Wide range of engines
See photos for part numbers

Pallet of Komatsu Spares
Pallet of Komatsu Spares

Fuel rails
Belts
Gaskets
Bearings
Oil seals

Pallet of Assorted Diesel Engine Parts
Pallet of Assorted Diesel Engine Parts

Volvo
Detroit Diesel
Mitsubishi
Scania
Bearings
Injectors

FG Wilson Generator Parts
FG Wilson Generator Parts

Assorted electronics
Governor
Box of exhaust clamps

Pallet of Mercedes Diesel Parts
Pallet of Mercedes Diesel Parts

Assorted mercedes diesel parts
Bearings
Sump
Valves
Gaskets

Cummins KTA Marine Exhaust Manifold
Cummins KTA Marine Exhaust Manifold

Marine exhaust manifold

Cummins KTA Marine Exhaust Manifold
Cummins KTA Marine Exhaust Manifold

Marine exhaust manifold

Cummins 855 Small Cam Diesel Parts
Cummins 855 Small Cam Diesel Parts

Used block
6 Conrods

Perkins 6.354 Cylinder Head and Crankshaft
Perkins 6.354 Cylinder Head and Crankshaft

Used Crankshaft
Used cylinder head

Cummins B Series Engine Parts
Cummins B Series Engine Parts

Reconditioned Cummins 4B cylinder head
6B flywheel and bell housing
6B Conrods and pistons
6B Marine exhaust manifold
6B used cylinder head
6B standard crank

Cummins VTA28 / 1710 Cylinder Heads
Cummins VTA28 / 1710 Cylinder Heads

4 used cylinder heads

Caterpillar 3406 Diesel Engine Parts
Caterpillar 3406 Diesel Engine Parts

2 used engine blocks
Used standard camshaft
Reconditioned camshaft
Engine pan
Intake manifold
New damper part 167-8130
Bell housing and flywheel
Injector pump
4 pallets of assorted parts

Caterpillar C9 Diesel Engine Parts
Caterpillar C9 Diesel Engine Parts

Used Cylinder Head
Rocker cover and riser
Valve train
Exhaust manifold

Caterpillar 3408 Block, Camshafts and Crankshaft
Caterpillar 3408 Block, Camshafts and Crankshaft

Reconditioned crankshaft
Ground .25mm
Used block (crack tested)
Reconditioned camshaft
Used camshaft

Caterpillar 3304 Head and Injector Pump
Caterpillar 3304 Head and Injector Pump

Caterpillar 3304 injector pump
Reconditioned bare head

Caterpillar 3208 Cylinder Heads
Caterpillar 3208 Cylinder Heads

6 reconditioned cylinder heads

Caterpillar 3204 Engine Parts
Caterpillar 3204 Engine Parts

Radiator
2 x exhaust manifolds
Injector pump

Reconditioned Cummins ISX Head and Camshafts
Reconditioned Cummins ISX Head and Camshafts

Reconditioned cylinder head
Reconditioned intake and exhaust camshafts

Cummins 855 Crankshafts and Camshafts
Cummins 855 Crankshafts and Camshafts

3 x standard used crankshafts (not ground)
Used camshaft
Reconditioned camshaft

8 x Reconditioned Cummins 855 Conrods
8 x Reconditioned Cummins 855 Conrods

Bushes replaced and remachined

Mack E9 Diesel Engine Crankshaft
Mack E9 Diesel Engine Crankshaft

Reconditioned Mack E9 Diesel Crankshaft
Ground .25mm

Cummins 855 Block, Camshaft, Crankshaft and Heads
Cummins 855 Block, Camshaft, Crankshaft and Heads

Used Cummins 855 parts
6 x cylinder heads
Crankshaft
Camshaft
Block

Cummins 855 Diesel Engine Parts
Cummins 855 Diesel Engine Parts

Used standard unground camshaft
Bell housing with flywheel
Turbo snail
Starter motor
Intercooler assembly
2 used cylinder heads

Cummins 855 Parts
Cummins 855 Parts

Reconditioned crankshaft
Reconditioned camshaft
3 x Reconditioned Cummins 855 heads
2 Cummins NH220 heads

Mitsubishi Intercoolers
Mitsubishi Intercoolers

Ex Mitsubishi S16R
Intercooler dimensions 770mm x 120mm x 60mm
Attached to housings

Perkins Sabre M135 Diesel Engine
Perkins Sabre M135 Diesel Engine

Used engine unknown condition
Marine engine
Suit Spares

Volvo D7E Diesel Engine Parts
Volvo D7E Diesel Engine Parts

Reconditioned engine block
2 used standard crankshafts
Boxes of new valves
17 x new cylinder liner kits
5 new head gaskets
Used cylinder head
Assorted gaskets
Rocker shaft
Box of new bearings, main bearings, bushes
Assorted injectors
New waterpump

Caterpillar 398 Diesel Engine Parts
Caterpillar 398 Diesel Engine Parts

Reconditioned Standard Crankshaft
Box of counterweights and bolts
12 used conrods
6 used cylinder heads
4 intercoolers
Intercooler housing
Filter housing
TDI air starter

Komatsu 12V-170 Heads and Conrods
Komatsu 12V-170 Heads and Conrods

12 x used cylinder heads
12 x reconditioned conrods

Reconditioned 3406PC Cylinder Head
Reconditioned 3406PC Cylinder Head

Reconditioned Caterpillar 3406 Pre Combustion Cylinder Head

Mitsubishi 8DC9 Crankshaft
Mitsubishi 8DC9 Crankshaft

Reconditioned Crankshaft
Has been ground

Detroit Series 60 Crankshaft
Detroit Series 60 Crankshaft

Detroit Diesel Series 60 Crankshaft
Standard unground

New Mercedes OM-352 Crankshaft
New Mercedes OM-352 Crankshaft

New Mercedes Crankshaft
In box

Caterpillar 3306 Diesel Engine Parts
Caterpillar 3306 Diesel Engine Parts

Reconditioned engine block
Used engine block
Three cylinder heads in unknown condition (stored for use)
2 bell housings
2 cranks both standard unground
Box of parts including injector pump

Caterpillar Auxiliary Drive
Caterpillar Auxiliary Drive

PTO drive unit
To suit Caterpillar 3408 and 3412 diesel engines
Spins freely

Caterpillar 3412 Diesel Engine Parts
Caterpillar 3412 Diesel Engine Parts

Cylinder head (unknown condition)
Box of parts
Oil pan

Box of Noritake Grinding Stones
Box of Noritake Grinding Stones

Noritake Grinding Stones
27 stones
150mm x 80mm x 25mm

Box of Noritake Grinding Stones
Box of Noritake Grinding Stones

Noritake Grinding Stones
52 stones
Grade 38A36H8V-SQUARE
150mm x 80mm x 25mm

Box of Noritake Grinding Stones
Box of Noritake Grinding Stones

Noritake Grinding Stones
20 stones
150mm x 80mm x 25mm

Box of Noritake Grinding Stones
Box of Noritake Grinding Stones

Noritake Grinding Stones
14 stones
150mm x 80mm x 25mm

Box of Noritake Grinding Stones
Box of Noritake Grinding Stones

Noritake Grinding Stones
28 stones
150mm x 80mm x 25mm

Box of Noritake Grinding Stones
Box of Noritake Grinding Stones

Noritake Grinding Stones
22 stones total
15 x 150mm x 80mm x 25mm
7 x 96mm x 80mm x 25mm

Pallet of Starter Motors and Alternators
Pallet of Starter Motors and Alternators

Large number of diesel engine starter motors off a wide range of engines
Approx 40 total
5 alternators
Unknown makes and models
Unknown operational condition

Turbocharger HX50 for Cummings M11 Diesel Engines
Turbocharger HX50 for Cummings M11 Diesel Engines

Turbocharger HX50 for Cummings M11 Diesel Engines.
Manufacturer is unknown.
Model No. HX50.
Unit appears to have been previously opened as there are oily fingerprints on it but it does not appear to have been installed or used. Leftover engine repair shop parts supply stock.
See our other listings for more of these HX50 turbochargers.

Turbocharger HX50 for Cummings M11 Diesel Engines, New
Turbocharger HX50 for Cummings M11 Diesel Engines, New

Turbocharger HX50 for Cummins M11 Diesel Engines, New.
Manufacturer is unknown.
Model No. HX50.
Unit is new in box, leftover engine repair shop parts supply stock.
Note - Photos are indicative so serial number may be different than the one seen in photos.
See our other listings for more of these new HX50 turbochargers.

Turbocharger HX50 for Cummings M11 Diesel Engines, New
Turbocharger HX50 for Cummings M11 Diesel Engines, New

Turbocharger HX50 for Cummins M11 Diesel Engines, New.
Manufacturer is unknown.
Model No. HX50.
Unit is new in box, leftover engine repair shop parts supply stock.
Note - Photos are indicative so serial number may be different than the one seen in photos.
See our other listings for more of these new HX50 turbochargers.

Turbocharger HX50 for Cummings M11 Diesel Engines, New
Turbocharger HX50 for Cummings M11 Diesel Engines, New

Turbocharger HX50 for Cummins M11 Diesel Engines, New.
Manufacturer is unknown.
Model No. HX50.
Unit is new in box, leftover engine repair shop parts supply stock.
Note - Photos are indicative so serial number may be different than the one seen in photos.
See our other listings for more of these new HX50 turbochargers.

Turbocharger HX50 for Cummings M11 Diesel Engines, New
Turbocharger HX50 for Cummings M11 Diesel Engines, New

Turbocharger HX50 for Cummins M11 Diesel Engines, New.
Manufacturer is unknown.
Model No. HX50.
Unit is new in box, leftover engine repair shop parts supply stock.
Note - Photos are indicative so serial number may be different than the one seen in photos.
See our other listings for more of these new HX50 turbochargers.

Turbocharger HX50 for Cummings M11 Diesel Engines, New
Turbocharger HX50 for Cummings M11 Diesel Engines, New

Turbocharger HX50 for Cummins M11 Diesel Engines, New.
Manufacturer is unknown.
Model No. HX50.
Unit is new in box, leftover engine repair shop parts supply stock.
Note - Photos are indicative so serial number may be different than the one seen in photos.
See our other listings for more of these new HX50 turbochargers.

Turbocharger HX50 for Cummings M11 Diesel Engines, New
Turbocharger HX50 for Cummings M11 Diesel Engines, New

Turbocharger HX50 for Cummins M11 Diesel Engines, New.
Manufacturer is unknown.
Model No. HX50.
Unit is new in box, leftover engine repair shop parts supply stock.
Note - Photos are indicative so serial number may be different than the one seen in photos.
See our other listings for more of these new HX50 turbochargers.

Turbocharger HX50 for Cummings M11 Diesel Engines, New
Turbocharger HX50 for Cummings M11 Diesel Engines, New

Turbocharger HX50 for Cummins M11 Diesel Engines, New.
Manufacturer is unknown.
Model No. HX50.
Unit is new in box, leftover engine repair shop parts supply stock.
Note - Photos are indicative so serial number may be different than the one seen in photos.
See our other listings for more of these new HX50 turbochargers.

Turbocharger HX50 for Cummings M11 Diesel Engines, New
Turbocharger HX50 for Cummings M11 Diesel Engines, New

Turbocharger HX50 for Cummins M11 Diesel Engines, New.
Manufacturer is unknown.
Model No. HX50.
Unit is new in box, leftover engine repair shop parts supply stock.
Note - Photos are indicative so serial number may be different than the one seen in photos.
See our other listings for more of these new HX50 turbochargers.

14x Assorted Vintage Technical Service Manuals, Specifications, & More
14x Assorted Vintage Technical Service Manuals, Specifications, & More

14x Assorted Technical Service Manuals, Specifications, & More.
- Glass's Technical Service Data books for commercial vehicles for year 1987 and 1990.
- Glass's Technical Service Data books for cars for years 1987, 1988, 1989.
- Boyce's Motor vehicle specifications for cars and trucks from 1975-1984.
- Boyces motor vehicle specifications and service fir cars and tricks from 1968-1979.
- 2x TES Machine Shop Soe ificatikns manual for cars and trucks.
- Glass Tech Technical Service Data manuals for light and heavy commercial trucks.
- Holden Commodore VR series service manual.

33x Assorted Diesel Engine Service Repair Manuals
33x Assorted Diesel Engine Service Repair Manuals

33x Assorted Diesel Engine Service Repair Manuals
Includes manuals for Lister, Toyota, Mitsubishi, Cummins, Volvo, Leyland, Isuzu, Iveco, Hino, Fiat, Komatsu, Deutz, KHD, Scania. See photos for further details on specific manuals included.
Condition - Items show moderate wear from engine shop usage.
See our other listings for more diesel engine service manuals

11x Detroit Diesel Engine Service Repair Manuals
11x Detroit Diesel Engine Service Repair Manuals

11x Detroit Diesel Engine Service Repair Manuals.
Includes the following Detroit diesel manuals:
- Series 53 Sections 1-3
- Series 53 Sections 4-15
- Series 60 Sections 1-2
- Series 60 Sections 3-15
- Series 71 Sections 1-3
- Series 71 Sections 4-15
- Series V71 Sections 1-3
- Series V71 Sections 4-15
- Series 92 Sections 1-2.23
- Series 92 Sections 2.24-6
- Series 92 Sections 7-15
Condition - Items show moderate wear from engine shop usage.
See our other listings for more diesel engine service manuals.

19x Assorted Diesel Engine Service Repair Manuals
19x Assorted Diesel Engine Service Repair Manuals

19x Assorted Diesel Engine Service Repair Manuals.
Includes manuals for Alloa Chalmers, Caterpillar, Hyster, Perkins, Nissan, Rolls Royce, International, Hino and other brands of diesel engines. See photos for further details on spivific manuals included.
Condition - Items show moderate wear from engine shop usage.
See our other listings for more diesel engine service manuals.

Large Fuel Tank
Large Fuel Tank

Large diesel tank
1750 litre capacity
Outlets in two corners and bottom edge

2 Container Fuel Tanks
2 Container Fuel Tanks

Steel fuel tanks
2400mm long x 530mm wide x 340mm tall
Some rust

Standard Office Workstation Desk
Standard Office Workstation Desk

Standard Office Workstation Desk.
Faux Wood Laminated MDF top with grey laminated support panels.
Some marks to surfaces, dust etc from use.
Desk only, no chair or other accessories included.

Large Steel Panel
Large Steel Panel

Large steel panel
Angle steel outside perimeter
Container panel one side
Louvre grate the other

20 Foot Insulated Container
20 Foot Insulated Container

20 Foot Insulated Container
Rear panel replaced with steel sheet
Doors replaced with box steel swing door, needs straightening and covering
Aluminum grate floor
Ex generator container
Some rust

3x Lengths of Plastic Piping
3x Lengths of Plastic Piping

3x Lengths of Plastic Piping.
2x short black pipe lengths and one long blue pipe length.
Length are are unknown
All pipes are 32mm diameter.
Blue pipe is marked with the following details
- Marley Blue 32mm PN12.5 SDRII PE80B 17.05.08 2041 AS/NZS 4130 LIC 2009 Material code ME3440 Made in NZ 100% Recyclable.
Unable to find ID markings on black Piping though appears very similar to blue pipe.
Leffover off cut lengths.

5.7m Industrial Nylon Cable Chain
5.7m Industrial Nylon Cable Chain

5.7m Industrial Nylon Cable Chain.
Manufactured by Brevetti Stendalto SPA
Model No. SR307.
5.7 metres long, 130mm wide, 65mm high.
Inner cable guide space is approx 85x30mm.
Condition - Appears that two cable guide sections are broken, see photos. Some rust on metal mounting plates at one end. Otherwise complete unit appears to flex normally.

Stainless Steel Bin
Stainless Steel Bin

Stainless steel bin
Heavy duty handles

Small Heated Parts Washer Bin
Small Heated Parts Washer Bin

Galvanized steel bin
Two elements
Single phase
Elements do not heat up
Unknown fault
Internal parts tray

Caterpillar Diesel Generator Control Unit
Caterpillar Diesel Generator Control Unit

Caterpillar Diesel Generator Control Unit.
Overall unit model number SB3GCMXXXXXXV7.
Yellow finished Steel casing.
Condition - Removed from failed diesel generator unit. Age of Assembly is in unknown. Rusty casing and components, dusty, wear to components.

Caterpillar Diesel Generator Control Unit
Caterpillar Diesel Generator Control Unit

Caterpillar Diesel Generator Control Unit.
The following comomnrts have visible part numbers:
- Caterpillar branded digital control unit model 4P-6407 3
- Start stop control panel 560-371.
All mounted in a yellow finished Steel casing.
Condition - Removed from failed diesel generator unit. Age of Assembly is in unknown. Rusty casing and components, dusty, wear to components. Side access cover is missing.

Caterpillar Diesel Generator Control Unit
Caterpillar Diesel Generator Control Unit

Caterpillar Diesel Generator Control Unit.
The following comomnrts have visible part numbers:
- Caterpillar branded digital control unit model 4P-6407 3
- Start stop control panel 143-0890.
All mounted in a yellow finished Steel casing.
Condition - Removed from failed diesel generator unit. Age of Assembly is in unknown. Rusty casing and components, dusty, wear to components. Side access cover is missing.

Caterpillar Generator Control Panel
Caterpillar Generator Control Panel

Caterpillar control board
Gauge set panel
Part number 143-6894
Switch panel
Part number 143-0889
Warning light display
Part number 143-6893
Side panel missing
Some rust in case

Caterpillar Diesel Generator Control Unit
Caterpillar Diesel Generator Control Unit

Caterpillar Diesel Generator Control Unit.
The following comomnrts have visible part numbers:
Overall main panel mounting frame 104-7287
- Caterpillar branded digital control unit model 4P-6407 3
- Start stop control panel 103-1837 3.
- no model numbers on other two panels.
All mounted in a yellow finished Steel casing.
Condition - Removed from failed diesel generator unit. Age of Assembly is in unknown. Rusty casing, dusty, wear to components.

Caterpillar Diesel Generator Control Unit
Caterpillar Diesel Generator Control Unit

Caterpillar Diesel Generator Control Unit.
The following comomnrts have visible part numbers:
Overall main panel mounting frame 104-7287
- Caterpillar branded digital control unit model 130-9716.
- Start stop control panel 103-1837 3.
- control panel 7C1009.
- control panel 7C0972 2
All mounted in a yellow finished Steel casing.
Condition - Removed from failed diesel generator unit. Age of Assembly is in unknown.

Caterpillar Generator Control Panel
Caterpillar Generator Control Panel

Caterpillar control board
Digital display unit
Part number 4P-6407 3
Switch panel
Part number 154-3045
In steel case

Large Steel Bin of Hydraulic Components
Large Steel Bin of Hydraulic Components

Stacking steel bin
Contents of hydraulic components
Valve banks
Hydraulic motor
Sleeps
Solenoid control valves
Filters
And more

Vintage Desoutter 10D Spring Balancer
Vintage Desoutter 10D Spring Balancer

Vintage Desoutter 10D Spring Balancer.
2.5 to 5kg capacity.
Condition - Shows moderate external wear, rusting etc but cable spring reel seems to operate and retract normally. May not be pretty but operates.

Froude Hydraulic Dynamometer
Froude Hydraulic Dynamometer

Model: Froude DPX7D
Rated for 3000hp at 1000/2300 rpm
Includes a wide range of accessories
Including large steel engine mounting plates and rails
Pipe work
Boxes of parts
EX Australian military

Industrial Medium Duty Shelving Components
Industrial Medium Duty Shelving Components

Industrial Medium Duty Shelving Components.
Includes:
- 80x steel Shelf sections each approx 910x600x30mm.
- 20x vertical support units each.
approx 2220mm tall by 55x25mm
- Box of Shelving Support Brackets.
Condition - Some rusting to many components. Box of brackets appears to be too few to cover most of the included shelving sections.
Items are on three pallets for buyer pickup.

Messer Cast Iron Welding Rods
Messer Cast Iron Welding Rods

Messer MG289 Welding Rods
3.2mm diameter pack almost full
2 boxes of random mixed rods

Pallet of Assorted Used Industrial Electrical Equipment
Pallet of Assorted Used Industrial Electrical Equipment

Pallet of Assorted Used Industrial Electrical Equipment.
Assorted Used circuit breakers, control panels, Workshop siren horns, and other various electrical components, see photos.
Merlin Gerin Masterpact M30 N1 circuit breaker
All items are used.

Pallet of Assorted Used Industrial Electrical Equipment
Pallet of Assorted Used Industrial Electrical Equipment

Pallet of Assorted Used Industrial Electrical Equipment.
Includes assorted large circuit breakers, power distribution panels, copper bars, etc. Invludes in well used water boiling unit. See photos for further details on what is on the pallet.
All items are used. Age unknown.

Pallet of Assorted Industrial Items
Pallet of Assorted Industrial Items

Pallet of Assorted Industrial Items.
Assorted stuff, leftover wire, use switches, used Gauges, Assorted belts, and more. Call it a "Mystery auction" of items.
Condition varies greatly with each item. Some appear unused, others show widely varying levels of usage.

Pallet of Assorted Industrial Items
Pallet of Assorted Industrial Items

Pallet of Assorted Industrial Items.
Assorted stuff, some Shelving, File cabinet, Assorted hoses, gasket material, old engine parts, electrical components, and more. Call it a "Mystery auction" of items.
Condition varies greatly with each item. Some appear unused, others show widely varying levels of usage.

Large White Cabinet and Shelves
Large White Cabinet and Shelves

Large two door cupboard
1980mm tall x 1660mm wide x 430mm deep
Cubby hole unit
2100mm tall x 1200mm wide x 330mm deep
Suitable for the shed

Workshop Dividing Walls
Workshop Dividing Walls

Approx 25 metres of aluminum and glass panel walls
2400mm tall
1330mm long each full panel
25 Panels total
Includes lights and plugs but does not include fans
Glass broken on many panels
Buyer to disassemble and remove

Oil Transfer Pump on Trolley
Oil Transfer Pump on Trolley

Single phase motor
Running small electric oil pump
Mounted on hand trolly
Inlet and outlet hoses

Hydraulic Pump
Hydraulic Pump

Unknown make or model
Unknown voltage
Believed to be ex scissor lift

HP ProBook 650 G1 Laptop Computer w/ Intel Core i5, BIOS Startup Faults
HP ProBook 650 G1 Laptop Computer w/ Intel Core i5, BIOS Startup Faults

HP ProBook 650 G1 Laptop Computer.
Processor - Intel Core i5 (specific model and speed unknown).
8Gb RAM.
No storage drive installed.
No operating system Included.
15. 6" screen.
Optical drive.
Includes charging cable.
Includes HP Docking Station.
Includes Belkin laptop case.
Condition - Laptop has BIOS error code 500 and is stuck in a BIOS recovery loop, see photos. Laptop shows generally minor physical usage marks.

5 Small Hydraulic Motors
5 Small Hydraulic Motors

Model: Sauer Danfoss ONSS 80

Compressor Test Unit
Compressor Test Unit

Compressor pressure test bed
Setup for bone
Broomwade compressors
12.5kw electric motor
Pressure tank
Built into steel frame
With box of accessories

Box of Broomwade Compressor Spares
Box of Broomwade Compressor Spares

Cylinders
Cracks
Pulleys
Pistons
Big wooden box of bits

Heavy Duty Adjustable Height Platform Trolley Cart
Heavy Duty Adjustable Height Platform Trolley Cart

Heavy Duty Adjustable Height Platform Trolley Cart.
Unknown manufacturer, model and lifting capacity.
Platform approx 1010x520mm.
Hydraulic foot Actuated platform Lifting.
150mm diameter wheels.
Condition - Trolley shows heavy surface wear and usage. Hydraulic lifting seems weak and doesn't seem to want to go highee than 620mm. May need servicing.

Large Industrial Cooling Fan
Large Industrial Cooling Fan

Large Industrial Cooling Fan
Imasu brand
800mm cage diameter.
No mounting bracket included.
Some denting to cage wire. Would benefit from and heavy cleanup.

Metal Part Protective Coating Machine
Metal Part Protective Coating Machine

Model: Barlow-Whitney OJT2
Three phase
For coating delicate steel parts with a rubber coating for shipping
See sample part photo (part not included in sale)

Hitachi 500kg Motorised Chain Hoist
Hitachi 500kg Motorised Chain Hoist

Hitachi 500kg Motorised Chain Hoist.
Type No. 1/2SH2
6m Lifting Chain length.
3-phase.
Manufactured in 1987.
Includes two damaged pendants.
Operational condition is unknown.

5 Ton Chain Hoist
5 Ton Chain Hoist

Kito brand
5 ton block and tackle

Vintage Herbert Mooris 3-Ton Mechanical Chain Hoist
Vintage Herbert Mooris 3-Ton Mechanical Chain Hoist

Vintage Herbert Mooris 3-Ton Mechanical Chain Hoist.
Made in England.
3-ton capacity.
Large hooks with approx 50mm inner gap

Realcold Spring Balancer
Realcold Spring Balancer

Model: Realcold IZ Endo
100kg - 120kg capacity

Hitachi Electric Girder Mounted Hoist
Hitachi Electric Girder Mounted Hoist

Hitachi Electric Girder Mounted Hoist.
Unable to find a plate stating model and specs so weight capacity and age is unknown.
Includes pendant model No. HB-5N
Operational condition is unknown.

Realcold Spring Balancer
Realcold Spring Balancer

Model: Realcold Endo EK-10
50kg-60kg capacity

Hitachi 500kg Motorised Chain Hoist
Hitachi 500kg Motorised Chain Hoist

Hitachi 500kg Motorised Chain Hoist.
Type No. 1/2SNH.
6m Lifting Chain length.
3-phase.
Manufactured in 1986.
No pendant included.
Operational condition is unknown.

Realcold Spring Balancer
Realcold Spring Balancer

Model: Realcold IZ Endo
85 - 100kg capacity

Hitachi 250kg Motorised Chain Hoist
Hitachi 250kg Motorised Chain Hoist

Hitachi 250kg Motorised Chain Hoist.
Type No. 1/4S
3m Lifting Chain.
3-phase.
Manufactured in 1987.
Includes control pendant.

Realcold Spring Balancer
Realcold Spring Balancer

Model: Realcold IZ Endo
85 - 100kg capacity

Assorted Lot of Industrial Motors, Chain Hoists & Components w/ Large Bin
Assorted Lot of Industrial Motors, Chain Hoists & Components w/ Large Bin

Assorted Lot of Industrial Motors, Chain Hoists & Components w/ Large Bin.
Includes assorted faulty and well used electric motors, chain Hoists and related items.
Includes the heavy steel storage bin as well.
See photos for further details on what is included within the bin.

Large Industrial Hydraulic Ram
Large Industrial Hydraulic Ram

Industrial Hydraulic Ram.
Unknown model and specs.
Main cylinder approx 1060mm long, 165mm diameter.
Unit appears to have been cut off from a larger assembly, see photos.

Industrial Hydraulic Ram
Industrial Hydraulic Ram

Industrial Hydraulic Ram.
Unknown model and specs.
Main cylinder approx 530mm long, 80mm diameter.
RAM shows moderate usage and wear.

Large Hydraulic Ram
Large Hydraulic Ram

Large Hydraulic RAM.
Unknown model and specs.
Main cylinder approx 1370mm long, 200mm diameter.
RAM shows moderate usage and wear.

Height Adjustable Office L-Shaped Corner Desk Workstation
Height Adjustable Office L-Shaped Corner Desk Workstation

Height Adjustable Office L-Shaped Corner Desk Workstation.
Unsure of manufacturer as ID label is worn.
White laminate top with light grey support frame.
Adjustable height with electric powered motor.
Control buttons under Desktop.
Condition. Some surface marks, tape residue and wear from use. Motor functions have not been tested.

Pair of Hydraulic Truck Leveling Legs
Pair of Hydraulic Truck Leveling Legs

Hiab type leveling legs
850mm long
250mm diameter feet

Avery 100kg Capacity Industrial Floor Scale
Avery 100kg Capacity Industrial Floor Scale

Avery 100kg Capacity Industrial Floor Scale.
Model 1632.
Weighs up to 100kg in 500g incriments.
Weighing base is approx 480x340mm and 120mm above floor.

2 Hydraulic Truck Leveling Legs
2 Hydraulic Truck Leveling Legs

Hiab type leveling legs
850mm long
250mm diameter pads

Large Industrial Cooling Fan
Large Industrial Cooling Fan

Large Industrial Cooling Fan
Imasu brand
700mm diameter
On pole mount
Will be removed for collection.
Very dusty unit, would benefit from a clean.

Pair of Hydraulic Truck Leveling Legs
Pair of Hydraulic Truck Leveling Legs

Hiab type leveling legs
850mm long
230mm diameter foot pads

Steel Surfaced Workshop Workbench
Steel Surfaced Workshop Workbench

Steel Surfaced Workshop Workbench.
Work surface approx 855mm above floor.
150mm high Backsplash.
3mm thick steel top work surface with MDF board lower shelf.
Break in a weld by one of the rear legs, see photos. Some surface rust.

Single Phase Drill Press
Single Phase Drill Press

Model: Hafco Metalmaster SBD-20B
16 speeds
Single phase 1 hp motor
Belt drive
Morse taper mounted chuck
Mounted on metal stand

Large Water Pump
Large Water Pump

Model: Regent Pumps 150-320-B310
150/32 impeller pump
Powered by 30Kw three phase motor
On steel frame

Pair of Large Intake Housings
Pair of Large Intake Housings

Overall dimensions 800mm tall x 390mm diameter
Outlet diameter 150mm

Forklift Mounted Drum Tipper
Forklift Mounted Drum Tipper

Slip on drum carrier/tipper

3x Samsung OfficeServ SMT-i5210 VoIP Business Phones
3x Samsung OfficeServ SMT-i5210 VoIP Business Phones

3x Samsung OfficeServ SMT-i5210 VoIP Business Phones.
Includes 2x power adapter cables.
One unit is missing its back support piece.
Items show surface dust, finger marks from office usage.

Chubb Fireproof Safe
Chubb Fireproof Safe

Large fireproof safe
Adjustable shelves
Lockable but key is missing

2x Office Desktop Fans
2x Office Desktop Fans

2x Office Desktop Fans.
Lining & Co 20W Black finished fan approx 230x100x250mm.
Buyright 30W chrome fan approx 280x130x290mm.

Double Container Shelter
Double Container Shelter

2 20 foot shipping containers
One in good condition
A small amount of surface rust showing on inside of roof
Second container is very rusty with holes in the roof and floor
Timber and corrugated metal roof between the two
Contents not included
Buyer will need to disassemble

Gigaset A580IP SIP DECT Office Phone System
Gigaset A580IP SIP DECT Office Phone System

Gigaset A580IP SIP DECT Office Phone System.
Includes the following Gigaset branded components:
- 3x A58H cordless Handsets.
- 5x charging bases with power cords.
- 3x DECT base units
- original box for one unit.
Condition - Varies with each unit. All handsets appear to operate though two shows more external usage wear than one other and one unit has faulty battery door cover. One unit needs AAA batteries.

Power Wash Steam Cleaner
Power Wash Steam Cleaner

Model: Power Wash Gold
Intergroup WS202 high pressure pump
Three phase
Diesel powered heater

10x Assorted Lengths of Steel
10x Assorted Lengths of Steel

10x Assorted Lengths of Steel.
Assorted sizes and types.
Longest and largest unit is approx 6730x310x170mm. Remaining nine other steel lengths are of varying smaller sizes.
Condition varies with each unit. Most show heavy rusting, rust flaking, etc.

Urano Steam Cleaner
Urano Steam Cleaner

Interpump Group WS202 high pressure pump
200 bar pressure
Three phase motor
Hose
Some gun parts
Diesel powered heater
Faulty

4x Hollow Steel Flag Poles
4x Hollow Steel Flag Poles

4x Hollow Steel Flag Poles.
All are around 9000mm in length.
Diameters range from approx 75mm at Bottoms to 60mm at tops.
Two units have eye loops at top for rope.
Condition - Units have been stored outdoors for some time. Rusty surfaces, green residue, etc. Could be refurbished for flag usage.
Auction is for the steel flag poles only, Other items seen in photos are not Included. See our other listings for those items.

2x Lengths of Steel Beams
2x Lengths of Steel Beams

2x Lengths of Steel Beams.
Includes:
- 1x Box Beam unit at approx 9100x200x110mm.
- 1x U shaped beam unit at approx 6440x200x80mm
Both units very rusty.
Auction is for the above mentioned items only, all other items seen in photos are not included. See our other listings for those items

Large Pallet of Roofing Steel
Large Pallet of Roofing Steel

Assorted used roofing iron
Mostly approx 8000mm wide
Longest lengths 4000mm
Approx 40 lengths

2x Lengths of Steel Beams
2x Lengths of Steel Beams

2x Lengths of Steel Beams.
Includes:
- 1x I-Beam unit at approx 8500x210x135mm.
- 1x U shaped beam unit at approx 6460x200x80mm.
Both units very rusty with flakes of rust falling off.
Auction is for the above mentioned items only, all other items seen in photos are not included. See our other listings for those items.

Pallet of Assorted Roofing Steel
Pallet of Assorted Roofing Steel

Assorted used roofing iron
Mostly approx 800mm wide
Longest lengths 3000mm
Approx 20 lengths

Heavy Duty Mobile Workshop Shelf Trolley
Heavy Duty Mobile Workshop Shelf Trolley

Heavy Duty Mobile Workshop Shelf Trolley.
MDF board top.
Steel frame.
150mm diameter wheels.
Steel bar push/pull handle at one end.
Shows typical workshop wear and usage. Some holes in MDF top.

2x Commercial Tyres w/ Wheels, 16.5" Rims
2x Commercial Tyres w/ Wheels, 16.5" Rims

2x Commercial Tyres w/ Wheels, 16.5" Rims.
Tyres are Skid Power HD, Wide Wall, 12-16.5 NHS.
Condition - Tyres show some wear and weathering from outside storage and usage wear but still have approx 23mm of tread remaining so might still be of use. Age of tyres is unknown. Rims show some surface rusting. See photos for further Condition details.

Pallet of Assorted Coloursteel
Pallet of Assorted Coloursteel

Assorted used roofing iron
Mostly approx 750mm wide
Longest lengths 4000mm
Approx 30 lengths

4x Commercial Tyres w/ Wheels, 16.5" Rims
4x Commercial Tyres w/ Wheels, 16.5" Rims

4x Commercial Tyres w/ Wheels, 16.5" Rims.
Steel rims are marked with "Use 16.5 Dia tire"
Tyres are Goodyear Super Single tubeless, 12-16.5 NHS
Condition - Tyres show heavy wear and usage and weathering from long term outside storage. Steel rims might be salvageable for reconditioning and reuse. Rims show some rusting, some bent edging. See photos for further Condition details.

2 Large Loader Tires
2 Large Loader Tires

Yokohama 29.5-25
General 29.5-25
Both worn

4x Commercial Tyres w/ Wheels, 19.5" Rims
4x Commercial Tyres w/ Wheels, 19.5" Rims

4x Commercial Tyres w/ Wheels, 19.5" Rims.
Steel rims are marked with "DO 19.5" x 11.75" T.
Tyres are Denman Skid Steer 15/19.5 NHS tubeless.
Condition - Tyres show heavy wear and usage and weathering from long term outside storage. Steel rims might be salvageable for reconditioning and reuse. Rims show some rusting. See photos for further Condition details.

20 Foot Container Shed
20 Foot Container Shed

20 foot shipping container
Roller door installed one end
Window installed in door on other end
Lights inside
Other contents not included
Significant rust, particularly in roof
Has steel roof laid over top but this is also rusty

Steel Cage
Steel Cage

Pipe frame
Mesh cover

Assorted Diesel Engine Replacement Parts, Bushings, Valve Insert
Assorted Diesel Engine Replacement Parts, Bushings, Valve Insert

Assorted Diesel Engine Replacement Parts, Bushings, Valve Inserts.
Includes:
- 9x IPD branded connecting rod bushings, all are Part No. 8N2275.
- 4x FP Diesel branded valve Inserts, Part No. FP-4N5893.
- 8x opened valve Inserts with part No 4N5893 written on side of wrapping.
- 2x boxes of PAI branded valve inserts, Part No. 391925
Condition - Leftover Workshop Parts supply stock. Some boxes have oil staining.

Mitutoyo Dial Indicator Set 950-158
Mitutoyo Dial Indicator Set 950-158

Mitutoyo Dial Indicator Set.
Part No. 950-158
0.02mm to 2.6mm.
Dial unit Part No 1158.
Set appears to have all original components, see photos.
Includes case.
Set shows Workshop usage
Case exterior shows more moderate wear.

Steel Tool Box w/ Assorted Compression Testing Gauges & Components
Steel Tool Box w/ Assorted Compression Testing Gauges & Components

Steel Tool Box w/ Assorted Vintage Compression Testing Gauges & Components.
Includes a REDeX diesel compression gauge and a second unbranded gauge.
Includes assorted hoses, couplings, other related parts, see photos.
Includes Steel Tool case approx 380x160x165mm.
Condition - Items show moderate wear and usage.

Assorted Hand Tools, Applicators, Cutters, & More
Assorted Hand Tools, Applicators, Cutters, & More

Assorted Hand Tools, Applicators, Cutters, & More.
Incomplete punch set, grips, specialty pliers, calk gun, bolt Cutters, and other specialty type hand tools. See photos for further details on included items.
Condition varies with each item.

Pair of Gantry Crane Rails
Pair of Gantry Crane Rails

2 Large crane beams
210mm x 130mm x 12700mm
Great for a farm bridge or similar

Large Gantry Crane Beam
Large Gantry Crane Beam

Large gantry crane beam

17x Assorted Sheets of Galvanised Steel Siding
17x Assorted Sheets of Galvanised Steel Siding

17x Assorted Sheets of Galvanised Steel Siding.
Longest sheet approx 10-metres, all others are shorter in various lengths.
Assorted colours.
Condition - Varies with each unit. Most appear to have various bends, dents, scratching, weathering from outside storage.

Large Steel Crate of Mufflers
Large Steel Crate of Mufflers

Heavy duty steel crate
Contents of 16 large mufflers
200mm ID steel pipe

Assorted Lot of Steel Piping with 2x Heavy Duty Racks
Assorted Lot of Steel Piping with 2x Heavy Duty Racks

Assorted Lot of Steel Piping with 2x Heavy Duty Racks.
Lengths up to approx 7-metres.
Assored diameters.
Includes 2x heavy Steel racks, one unit is approx 2150x1030x1560mm. Second unit is approx 1210x1020x1410mm.
Condition - Racks and many pipes show heavy rusting. See photos for further details on types of pipes and condition.

Gantry Crane
Gantry Crane

Steel gantry crane
No hoist or rails

6 Pallets of Furnace Elements
6 Pallets of Furnace Elements

Elements ex heat treatment oven

Parts Only Electric Lifter
Parts Only Electric Lifter

Model: Crown 20MT130A
Max lift height 3300mm
1000kg capacity
Integrated charger
1060mm long forks

4 x Industrial Roller Doors
4 x Industrial Roller Doors

Four roller doors
Three with motors
No rails
Heights unknown
Widths:
3180mm
3180mm
2500mm
3750mm

2.8m Double Leg Container Lifting Chain Assembly, 14,000kg Capacity
2.8m Double Leg Container Lifting Chain Assembly, 14,000kg Capacity

2.8m Double Leg Container Lifting Chain Assembly, 14,000kg Capacity.
Double keg capacity 14,000kg.
Single leg capacity 10,000kg.
2.8m chain length.
16mm chain size.
Master link approx 310x200mm.
Container connectors attached to chain ends.

Pallet of Large Diameter Pipe
Pallet of Large Diameter Pipe

Steel cage of large diameter water pipe
150mm and 200mm inner diameter
Longest length approx 2000mm
2 Large gate valves
Heavy duty steel crate

Low Heavy Duty Workshop Platform Trolley
Low Heavy Duty Workshop Platform Trolley

Low Heavy Duty Workshop Platform Trolley.
10mm Diameter wheels
3mm thick steel plate surface.

Two Compressors and Air Cooler Dryer
Two Compressors and Air Cooler Dryer

Atlas Copco GA18
Atlas Copco GA22
Atlas Copco FDA 25
All parts only in unknown condition

2x Metric Outside Micrometers w/ Wood Case
2x Metric Outside Micrometers w/ Wood Case

2x Metric Outside Micrometers w/ Wood Case.
Includes:
- 100-125mm Micrometer.
- 125-150mm Micrometer.
- 330x185x155mm wood case.
Condition - Wood case is missing lid. Only 2x Micrometers Included, other four are missing. Some surface rust on shaft of small Micrometer

3-Door Steel Personnel Locker Unit
3-Door Steel Personnel Locker Unit

3-Door Steel Personnel Locker Unit.
Three separate compartments within unit.
Condition - Unit shows heavy usage and wear. Dented surfaces, inner floors bent, rusting panels etc.

6-Door Steel Personnel Locker Unit
6-Door Steel Personnel Locker Unit

6-Door Steel Personnel Locker Unit.
Six separate compartments within unit.
Doors can be locked with padlocks (padlocks not included).
Condition - Unit shows heavy usage and wear. Dented surfaces, inner floors loose, rusting panels etc. One door missing padlock Loop.

Large Industrial Trolley
Large Industrial Trolley

Heavy steel frame
Swivel front wheels
Wheels need unjamming

5-Door Steel Personnel Locker Unit
5-Door Steel Personnel Locker Unit

5-Door Steel Personnel Locker Unit.
Five separate compartments within unit.
Non-locking doors.
Condition - Unit shows heavy usage and wear. Dented surfaces, inner floors loose, rusting panels etc.

Heavy Duty Trolley
Heavy Duty Trolley

Heavy duty steel construction
Forklift points
Swivel wheels front

Industrial Heavy Duty Pallet Racking Components
Industrial Heavy Duty Pallet Racking Components

Industrial Heavy Duty Pallet Racking Components.
Unknown brand.
Includes the following components:
- 3x 3500mm high, 840mm wide vertical frames.
- 14x 2700x85x50mm horizontal beams.
- 12+ adjustable horizontal beam cross members.
Note - Auction includes the above mentioned items only.

Heavy Duty Trolley
Heavy Duty Trolley

Steel construction
Swivel wheels front
Forklift points

Heavy Duty Adjustable Storage Racking Components
Heavy Duty Adjustable Storage Racking Components

Heavy Duty Adjustable Storage Racking Components.
Includes:
- 4x vertical frames each approx 1200x65x580mm.
- 2x horizontal shelf Assemblies with wooden board surfaces, each approx 1200x980,200mm.
Condition - Very rusted, weathered components.

Heavy Duty Trolley
Heavy Duty Trolley

Large Industrial trolley
Swivel front wheels
Sliding metal tray

Hydraulic Portapower
Hydraulic Portapower

470mm hydraulic power pack
Hand pump
Unknown brand

Compressor Pressure Tank
Compressor Pressure Tank

Atlas Copco branded pressure tank
Approx 600mm diameter x 1440mm tall
With metre
On vertical stand

Large Stainless Steel Tank
Large Stainless Steel Tank

Large Stainless Steel Tank.
Scrap steel seen inside unit is not included.
Surfaces show wear and weathering from long tern outside exposure.

Ceccato Workshop Compressor
Ceccato Workshop Compressor

Model: Ceccato Aria CSA20 500D
Max pressure 8 bar
Rotary screw compressor
500 litre air receiver
Three phase
34676 hours on clock
Next service due 35546 hours
Built in air cooler/dryer

Heavy Duty Adjustable Storage Racking Components
Heavy Duty Adjustable Storage Racking Components

Heavy Duty Adjustable Storage Racking Components.
Cimorusdd of 7x separate units that can be adjusted to suit.
- 3x horizontal frame units each approx 2000x1200x250mm, one unit has a MDF board surface on top.
- 4x vertical frame units each 1200x65x585mm.
- 2x Steel Wire side screens.
Condition - excluding the side screens, items show moderate rusting and wear. MDF board heavily water warped.

1380mm Long Lifting Spreader Bar
1380mm Long Lifting Spreader Bar

1380mm Long Lifting Spreader Bar.
4x 750mm long chains
Uncertified, no visible ID label, lifting weight limit unknown.
Very rusty surfaces from outdoor storage

Large Radiator and Fan
Large Radiator and Fan

Large radiator for industrial diesel engine
1760mm diameter fan with shroud
Caterpillar 3512

Heavy Concrete Slab Topped Workshop Table
Heavy Concrete Slab Topped Workshop Table

Heavy Concrete Slab Topped Workshop Table.
139mm thick concrete Slab top.
Heavy steel support frame.
Note - Auction is for table only, lifting beam seen on table is NOT included. See our other listings for that item.

Control Panel
Control Panel

Steel control cabinet
Contents include
2 x Honeywell UDC2300 MINI-PRO
Large breaker switch
2 x A-B CAB6-170-EI
Large heatsink with fan
And more

Pair of Steel Tube Saw Horses
Pair of Steel Tube Saw Horses

Pair of Steel Tube Saw Horses.
50mm diameter hollow steel tube top bar.

Large Industrial Power Cabinet
Large Industrial Power Cabinet

Large industrial switch board
Bremca brand
Breakers
Switches
Bus bars
Meters

Industrial Heavy Duty Pallet Racking Components
Industrial Heavy Duty Pallet Racking Components

Industrial Heavy Duty Pallet Racking Components.
Unknown brand.
Includes the following components:
- 2x 3300mm high, 840mm wide vertical frames.
- 4x 2700x85x50mm horizontal beams.
- 8x adjustable horizontal beam cross members.
- 1x MDF Shelving board
Note - Auction includes the above mentioned items only, all other items seen in photos on and around Racking are NOT included.
Note - Buyer will need to decommission the Racking themselves and will need to bring the appropriate manpower to assist.

Industrial Heavy Duty Pallet Racking Components
Industrial Heavy Duty Pallet Racking Components

Industrial Heavy Duty Pallet Racking Components.
Unknown brand.
Includes the following components:
- 2x 3300mm high, 840mm wide vertical frames.
- 2x 3650mm hight, 840mm wide vertical frames.
- 24x 2700x85x50mm horizontal beams.
- 40+ adjustable horizontal beam cross members.
- 10x MDF or plywood Shelving boards.
Note - Auction includes the above mentioned items only, all other items seen in photos on and around Racking are NOT included.
Note - Buyer will need to decommission the Racking themselves and will need to bring the appropriate manpower to assist.

Hearing Test Quiet Room
Hearing Test Quiet Room

Hearing test quiet room
90mm thick insulated walls and door
Single double glazed window
Lights inside aluminum exterior
Industrial Acoustics Company Limited
https://www.iac-noisecontrol.com/Standard-Models-Booths-IAC-Acoustics-Noise-Control-UK.html

Industrial Heavy Duty Pallet Racking Components
Industrial Heavy Duty Pallet Racking Components

Industrial Heavy Duty Pallet Racking Components.
Unknown brand.
Includes the following components:
- 3x 3500mm high, 840mm wide yellow vertical frames.
- 2x 3350x120x50mm orange horizontal beams.
- 6x 2720x85x50mm yellow horizontal beams.
- 20x adjustable horizontal beam cross members.
- 3x MDF Shelving boards.
Note - Auction includes the above mentioned items only, all other items seen in photos on and around Racking are NOT included.
Note - Buyer will need to decommission the Racking themselves and will need to bring the appropriate manpower to assist.

2x Vintage Retro Office Desks
2x Vintage Retro Office Desks

2x Vintage Retro Office Desks.
- First amazing unit will bring you back to the rockin 80's with its stylishly curved light grey laminated surfaces. Padded arm rest to comfort you arms as you type away. Keyboard surface even folds up...not sure why but its cool! This stylish beauty is mounted on Castors even. Overall measurements approx 900x730x870mm.
- Second unit will send you even farther back to the groovy 70's with its dark real wood and MDF Laminated surfaces and supple black vinyl work surface. Has three groovy drawers underneath. Desk is 1200x700x735mm.

Eutectic Castolin Metal Treatment Gun
Eutectic Castolin Metal Treatment Gun

Model: Eutectic Castolin CastoDyn DS 8000
industrial thermal coating gun
Extension neck
Nozzles
Trolley
Manuals
Oxyacetylene regulators
Hoses
Range of metal spray powders

Brother HL-2240D Desktop Mono Laser Printer
Brother HL-2240D Desktop Mono Laser Printer

Brother HL-2240D Desktop Mono Laser Printer.
Prints up to A4 size.
Page count a D toner status unknown.
Printer shows minor usage.
Inudes power cord. USB cable not included.

New Ican Hand Lubricant Pump
New Ican Hand Lubricant Pump

Ican model 001083
Hand pump for plastic oil containers
New in bag

Ican Drums, Lids and Paint Pails
Ican Drums, Lids and Paint Pails

5 x Ican 5 litre drums
Part 001014
5x Ican 10 litre drums
Part 001021
8 x Ican Pump Storage Lids
Part 001045
2 x Ican 2 litre drums
Part 001007
4 x Ican Pour Lids
Part 001373
2 x has Handy Paint Pail pro series

6 x New 10 Litre Drums
6 x New 10 Litre Drums

Ican 10 litre drums
Part 001021
2 x Pour lids with nozzle
Part 001380
4 x pump storage lids
Part 001045

Oil Pump 341312 for CAT Caterpillar C15 Diesel Engine
Oil Pump 341312 for CAT Caterpillar C15 Diesel Engine

Oil Pump for CAT Caterpillar C15 Diesel Engine.
Part No. 341312.
Msde in USA.
Includes box.
Condition - Pump appear to be leftover unused repair shop parts stock. One hole shows rust spotting from long term storage. Interior of pump is clean so is likely just unused old stock.

2x Partial 205L Barrels of Donaldson Heavy Duty Coolant Premix
2x Partial 205L Barrels of Donaldson Heavy Duty Coolant Premix

2x Partial 205L Barrels of Donaldson Heavy Duty Coolant Premix.
Donaldson Part No. P901852.
One 205L barrel feels mostly full, second barrel seems roughly 1/4 full. Have not been opened for verification for safery reasons.
Leftover Workshop supply stock.

Power Factor Correctors
Power Factor Correctors

Assorted ESTAprop power factor correcting capacitors
8 total

Assorted Bolts, Washers, Storage Bins & More
Assorted Bolts, Washers, Storage Bins & More

Assorted Bolts, Washers, Storage Bins & More.
Includes assorted mostly used bolts of various types, Washers, some nuts, as well as other fastening hardware.
Includes plastic storage bins.
See photos for further details on Included items.

Spool of Wire Rope
Spool of Wire Rope

Part spool of 9mm wire rope

Box of Industrial Electrics and Lights
Box of Industrial Electrics and Lights

High bay warehouse light bulbs
PDL Picodrive VSDs
Assorted small light bulbs
Light ballasts
In wooden box

Heavy Duty Steel Workbench
Heavy Duty Steel Workbench

Heavy Duty Steel Workbench.
Steel frame with 3mm thick steel plate top work surface.
Work surface 850mm above floor
150mm high rear Backsplash.
Lower wooden shelves.
Cloth curtains covering lower shelf.
Note - other items seen on and near Workbench are not included.

Pallet of Three Phase Electrical Components
Pallet of Three Phase Electrical Components

Three phase plug points
Breakers
Part electric motor

Large 12-Metre Partial Structure, Walls, Windows, Door
Large 12-Metre Partial Structure, Walls, Windows, Door

Large 12-Metre Partial Structure.
Auction includes this semi enclosed structure built on the upper floor of this factory. Auction includes the door unit, wall and glass window sections, ceiling sections with Flourecent lighting, and wood frame structure.
Two sides are walled, two other sides are open.
The floor is not included.
Note - Buyer will need to plan appropriately and bring extra hands, tools and transport to dissasrnble and remove structure from its upper floor location. Forklifts are on site to assist when needed.

Pallet of Assorted Industrial Supplies
Pallet of Assorted Industrial Supplies

Three phase plugs and switches
Woodward low voltage load sharing and speed controls
Engine parts
Flashing light
Roll of cable
Large fuel filter housing
Bolts and nuts

Pallet of Assorted Industrial Supplies
Pallet of Assorted Industrial Supplies

Wire folder racks
Torque converter fan
Small three phase motor
Box of cast parts
Lights
Clamps
Filter
Electrical parts

Pallet of Three Phase Electrical Equipment
Pallet of Three Phase Electrical Equipment

Microdrive MK II Variable Speed Drive
Three phase sockets
Large circuit breakers
Three phase switches

Medium Duty Adjustable Steel Workshop Shelving
Medium Duty Adjustable Steel Workshop Shelving

Medium Duty Adjustable Steel Workshop Shelving.
15x 910x605mm Shelving sections.
Can be fully dissasembled for buyer to transport.
Unit shows heavy wear and usage.

Medium Duty Adjustable Steel Workshop Shelving
Medium Duty Adjustable Steel Workshop Shelving

Medium Duty Adjustable Steel Workshop Shelving.
10x 910x605mm Shelving sections.
Can be fully dissasembled for buyer to transport.
Unit shows heavy wear and usage.

Boxes of Belts
Boxes of Belts

Two boxes of assorted V-belts

600hp Containerised Engine Dyno
600hp Containerised Engine Dyno

Model: Heenan & Froude Standard D.P.Y.5
600hp max capacity
Max rpm 3500
Mounted into 2 20' containers
Insulated container has the dyno with sump
Exhaust pipes / hoses
Second container is a standard 20 foot
Both containers in rough condition and have had a roof constructed over them
Has large diesel tank 2100mm long x 1200mm diameter
Assume shelving
Water tank behind and three cooling towers
Lean too with electrical, pumps and boxes of exhaust fittings
Buyer will need to decommission for removal

Heavy Duty Steel Workbench w/ Vice
Heavy Duty Steel Workbench w/ Vice

Heavy Duty Steel Workbench w/ Vice.
Steel frame with 3mm thick steel plate top work surface.
Work surface 850mm above floor
150mm high rear Backsplash.
Lower wooden shelves.
Includes attached Record No.5 vice.
Note - Auction is for above items only, all other items seen on and within and near Workbench are not included.

Cummins 6 Cylinder Diesel Engine in Frame
Cummins 6 Cylinder Diesel Engine in Frame

Model: Cummins 6CTA8.3 C260
194 Kw
Manufactured 2010
On stand with radiator
Air cleaner
Ex pump unit
Running engine straight out of work
Replaced as they were using oil

Cummins 6 Cylinder Diesel Engine in Frame
Cummins 6 Cylinder Diesel Engine in Frame

Model: Cummins 6CTA8.3 C260
194 Kw
Manufactured 2010
Engine number 87818771
On stand with radiator
Air cleaner
Ex pump unit
Running engine straight out of work
Replaced as they were using oil

Muti Drawer Parts Bin Units w/ Assorted Brass, Copper Washers, Rings & More
Muti Drawer Parts Bin Units w/ Assorted Brass, Copper Washers, Rings & More

Muti Drawer Parts Bin Units w/ Assorted Brass, Copper Washers, Rings & More.
Blue 25-drawer unit 400x165x320mm.
Red 35-drawer 2-piece unit 400x165x465mm.
Mist drawers contain assorted rings, Washers, and similar items. Materials include brass, copper, steel, Cork, plastic versions. See photos for further details on items Included within drawers.

Cummins 6 Cylinder Diesel Engine
Cummins 6 Cylinder Diesel Engine

Model: Cummins NT-855-L4 6 Cylinder Diesel
236 horsepower
Configuration number D092199LX01
Engine number 10707207
Manufactured 1976
This engine is a running unit has been dyno tested and all performance parameters were met.

Antique Vintage Brass & Copper Pressure Gauge
Antique Vintage Brass & Copper Pressure Gauge

Antique Vintage Brass & Copper Pressure Gauge.
Made in England
Trent, Hamworthy branded.
Dial face approx 100mm diameter.
Condition - Shows wear and tarnishing to brass and copper components. Some denting along edges. Great for restoration.

Marine Caterpillar V8 Diesel
Marine Caterpillar V8 Diesel

Model: Caterpillar 3408 V8 Diesel Engine
Marine version
Serial number 67U2571
365 horsepower
Turbo

12x Assorted Adjustable Hand Reamers
12x Assorted Adjustable Hand Reamers

12x Assorted Adjustable Hand Reamers.
Assorted sizes.
Condition - Most size markings are worn off. Some are missing Cutter Blades.

34-38mm Adjustable Hand Reamer by Solar
34-38mm Adjustable Hand Reamer by Solar

34-38mm Adjustable Hand Reamer by Solar.
Part No. H14.
Range from 34.1mm to 38.1mm.
Includes box.
Condition - Appears to be unused old stock. Box shows storage wear.

Large Steel Wheeled Steel Rack
Large Steel Wheeled Steel Rack

Multilevel steel materials rack
4 levels
5mm plate steel worktop
On heavy duty wheels
Contents of steel

3 Heavy Duty Wheeled Dollies
3 Heavy Duty Wheeled Dollies

Heavy wheeled trolleys
Ex engine moving
Each one 1220mm long x 290mm wide x 400mm tall
Mounting slots in top plate
250mm diameter wheels with solid rubber tires
Two swiveling sets one fixed set

38-46mm Adjustable Hand Reamer by T&J
38-46mm Adjustable Hand Reamer by T&J

38-46mm Adjustable Hand Reamer.
Made in England by Taylor & Jones.
Part No. H15.
Size range from 38.10mm to 46.03mm.
Includes case.

Steel Tool Box w/ Assorted Parts & Components
Steel Tool Box w/ Assorted Parts & Components

Steel Tool Box w/ Assorted Parts & Components.
Unknown manufacturer.
Includes assorted parts and components within toolbox, see photos.
Toolbox shows typical workshop wear. Condition varies with each item inside.

Caterpillar V8 Diesel Engine
Caterpillar V8 Diesel Engine

Model: Caterpillar 3408 V8 Diesel Engine
Serial number 67U2571
365 horsepower
Turbo
This engine is a running unit has been dyno tested and all performance parameters were met.

Assorted Partial Sets of Replacement Rubber O-Ring Seals
Assorted Partial Sets of Replacement Rubber O-Ring Seals

Assorted Partial Sets of Replacement Rubber O-Ring Seals.
Assorted sizes, two sets are missing ID labels so sizes unknown.
Leftover stock. Cases show heavy wear. All sets partials with many rings missing, see photos.

Caterpillar Generator
Caterpillar Generator

Diesel generator power end
Model: Caterpillar 3406
261kva (209kw)
Three phase 400 volts
50 hertz

Nico Marine Gearbox
Nico Marine Gearbox

Model: Nico Marine MGNV7040-1
Rated hp 387
Engine speed 2300rpm
Unknown condition

2400mm Whiteboard by 3D Products
2400mm Whiteboard by 3D Products

2400mm Whiteboard by 3D Products.
Magnetic backing.
Includes eraser and marker tray with markers.
Thin black tape lines have been assed to surface.
Holes near sides from being screwed to wall.

Reintjes Hydraulic Transmission
Reintjes Hydraulic Transmission

Model: Reintjes 53494 WAF 44
Manufactured 1987
Input capacity 500kw
Input speed 1650 rpm
Unknown condition

2x Dinet Diesel Transmission Control Cables 68 1601 11
2x Dinet Diesel Transmission Control Cables 68 1601 11

2x Dinet Diesel Transmission Control Cables.
Both are Part No. 68 1601 11.
3-metre length each.
Both units are new unused leftover parts supply stock. One has been opened by us for photos only.
See the Dinet weblink below for further details:
https://www.dinet.biz/Product/voith/68-1601-11-cable-1-3m/

Cummins B Series LPG Engine
Cummins B Series LPG Engine

Model: Cummins 6BT5.9
LPG bus engine
172Kw at 2800rpm
Muffler
Block is the same as the diesel version

Cummins B Series LPG Engine
Cummins B Series LPG Engine

Model: Cummins 6BT5.9
LPG bus engine
172Kw at 2800rpm
Muffler
Block is the same as the diesel version

Cummins B Series LPG Engine
Cummins B Series LPG Engine

Model: Cummins 6BT5.9
LPG bus engine
172Kw at 2800rpm
Muffler
Block is the same as the diesel version

Assorted Diesel Engine Replacement Parts, Cummings, CAT & More
Assorted Diesel Engine Replacement Parts, Cummings, CAT & More

Assorted Diesel Engine Replacement Parts.
Includes Cummins and Caterpillar branded spare parts as well as other third party brands.
A wide variety of spares including gaskets, filters, Rocker arms, rubber mounts, belts, bearings, engine valves, and much more, not enough space to list.
Condition - Leftover Workshop Parts supply stock. Some parts appear old as packaging is very worn. Most others appear more recent. Some packaging has been opened. Some parts missing packaging.

Cummins B Series LPG Engine
Cummins B Series LPG Engine

Model: Cummins 6BT5.9
LPG bus engine
172Kw at 2800rpm
Muffler
Block is the same as the diesel version

Cummins B Series LPG Engine
Cummins B Series LPG Engine

Model: Cummins 6BT5.9
LPG bus engine
172Kw at 2800rpm
Muffler
Block is the same as the diesel version

Cummins K19 Diesel Engine
Cummins K19 Diesel Engine

Model: Cummins QSK19-C 6 Cylinder Diesel Engine
19 litre
Engine serial: 37178233
Unknown specification
Engine for rebuild only
Unknown faults

Caterpillar D398 Diesel
Caterpillar D398 Diesel

Model: Caterpillar D398 12 Cylinder Diesel
Serial number: 66B08241
Performance spec: F2M7
Arrangement: 3N1127
850 horsepower (625kw) at 1200rpm
On skids
Twin turbo
Imported from the USA as a running engine

To see a video of this engine being turned over:
https://youtu.be/yIM9xrCTMic

205L (40gal) Drum Forklift Mounted Lifter
205L (40gal) Drum Forklift Mounted Lifter

205L (40gal) Drum Forklift Mounted Lifter.
Unknown manufacturer.
Fork slots 190x90mm

V8 Stand for Vertical Boring
V8 Stand for Vertical Boring

V8 cylinder boring stand
For vertical cylinder boring machines
Includes stands
Angle braces
Adapter collets
Ex Ruaro Cylinder Boring Machine

Amperex 7092 Triode Vacuum Tube
Amperex 7092 Triode Vacuum Tube

Amperex 7092 Triode Vacuum Tube.
Made in France.
Model 7092 (TBS 2500).
Appears to be unused leftover parts stock.
Includes original box.
Age of item is unknown.

150mm Diameter 16 Bar Water Irrigation Valve
150mm Diameter 16 Bar Water Irrigation Valve

150mm Diameter 16 Bar Water Irrigation Valve.
Made in NZ by Gillies Foundary & Engineering Limited.
Manufactured in 2000.
150mm inner diameter on each end.
16 Bar max pressure.
Condition - Unit shows use, wear, some rusting.

Professional Audio Visual IT Equipment Cabinet
Professional Audio Visual IT Equipment Cabinet

Professional Audio Visual IT Equipment Cabinet.
Unknown manufacturer.
Removable side panels.
Lockable frontband rear doors, keys are included.
Equipment Support rack spacing is approx 480mn wide.
Two inner adjustable shelves.
Two Venting fans mounted to top.
Condition - Some finish scratches and wear marks. Wheels are missing.

26x Connecting Rod Bushings FP-3043909 for Cummings Diesel Engines
26x Connecting Rod Bushings FP-3043909 for Cummings Diesel Engines

26x Connecting Rod Bushings FP-3043909 for Cummins Diesel Engines.
FP Diesel branded.
For use on compatible Cummins Diesel engines.
New unused leftover parts stock. One unit opened for photos.

New Fan Motor
New Fan Motor

Imasu brand
Fan motor unit
Mechanical swing system
16mm shaft
3 speeds

Large Box of Electrical Parts
Large Box of Electrical Parts

Three phase electrical parts
Three phase plug points
Switches
Breakers
And more

2x Diesel Engine Turbocharger Lagging Wraps 49181-14410 by Mitsubishi
2x Diesel Engine Turbocharger Lagging Wraps 49181-14410 by Mitsubishi

2x Diesel Engine Turbocharger Lagging Wraps 49181-14410 by Mitsubishi.
Leftover unused part supply stock. Bags still sealed.

3 Large Bins Pipe Clamps
3 Large Bins Pipe Clamps

Large stainless pipe clamps
Range of sizes
Largest approx 200mm

PDL Soft Starter
PDL Soft Starter

Model: PDL RVSX-22.5 Reduced Voltage Starter
22.5 amps
380-480 volts
In box
Appears new

PDL Soft Starter
PDL Soft Starter

Model: PDL RVSX-22.5 Reduced Voltage Starter
22.5 amps
380-480 volts

PDL Microdrive Variable Speed Drive
PDL Microdrive Variable Speed Drive

Model: PDL Microdrive Elite ME 6.5
6.5 amps
230 - 480 volts
In box with manual
Some case corrosion from storage

Turbocharger Assembly for Industrial Diesel Engines
Turbocharger Assembly for Industrial Diesel Engines

Turbocharger Assembly for Industrial Diesel Engines.
ID plate lists the following numbers:
- NB0562
- 8926686
- F12020161.
Unable to find details on unit online.
See photos for further details on design of unit.
Includes gasket set.
Condition - Unit appears unused but shows surface rust spotting from long term storage.

Waterblaster Gun and Hose
Waterblaster Gun and Hose

Ehale ML955 5800psi waterblaster wand
Length of hose with connectors

CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines
CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines

CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines.
CAT branded.
Bag opened to aquire better photos of unit.
New unused unit. Box and gasket set missing.

Copeland Refrigeration Compressor
Copeland Refrigeration Compressor

Model: Copeland ZR36K3-TFD-522
For full spec:
http://www.iecono.com/shop-by-brand/emerson/copeland-scroll-compressor-zr36k3-tfd-522-r22.html

Copeland Refrigeration Compressor
Copeland Refrigeration Compressor

Model: Copeland ZR36K3-TFD-522
For full spec:
http://www.iecono.com/shop-by-brand/emerson/copeland-scroll-compressor-zr36k3-tfd-522-r22.html

CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines
CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines

CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines.
CAT branded.
Bag opened to aquire better photos of unit.
New unused unit. Box and gasket set missing.

Box of Centrifugal Oil Filters and Accessories
Box of Centrifugal Oil Filters and Accessories

Spin-Clean Model 150 Oil Cleaning Centrifuge
Filtek FT060 Oil Cleaning Centrifuge
ABB battery unit
ABB Shunts
Assorted bits and pieces

CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines, New
CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines, New

CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines.
CAT branded.
Includes box and gasket set.
Bag opened to aquire better photos of unit.
New unused unit.

Box of Large Hose Clamps
Box of Large Hose Clamps

Large diameter stainless hose clamps
Mostly approx 100mm - 130mm diameter
Approx 50

CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines, New
CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines, New

CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines.
CAT branded.
Includes box and gasket set.
Bag opend to aquire better photos of unit.
New unused unit.

Blackmer Rotary Pump
Blackmer Rotary Pump

Model: Blackmer 210a
On steel plate

CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines, New
CAT Caterpillar OEM Turbocharger Assembly 167-9271 for CAT C15 Engines, New

OEM Turbocharger Assembly 167-9271 for CAT Caterpillar C15 Engines
Item is as new with box and gasket set. Bag has been opened to aquire better photos of item.

Small Steel Tank on Stand
Small Steel Tank on Stand

Steel tank on stand
Tank dimensions 350mm x 350mm x 200mm
Tap in front
Filler filter

Small Steel Tank on Stand
Small Steel Tank on Stand

Steel tank on stand
Tank dimensions 350mm x 350mm x 200mm
Tap in front
Filler filter

3x TWS A073 Current Transformers
3x TWS A073 Current Transformers

3x TWS A073 Current Transformers.
Each unit measures approx 190x165,40mm.
See photos for further design and spec details.
Units appear to be unused leftover parts stock.

Engine Block Heater
Engine Block Heater

Model: Hotstart KHL140210-102
240 volt 4000 watts

New Ican Hand Lubricant Pump
New Ican Hand Lubricant Pump

Ican model 001083
Hand pump for plastic oil containers
New in bag

New Ican Hand Lubricant Pump
New Ican Hand Lubricant Pump

Ican model 001083
Hand pump for plastic oil containers
New in bag

New Ican Hand Lubricant Pump
New Ican Hand Lubricant Pump

Ican model 001083
Hand pump for plastic oil containers
New in bag

New Ican Hand Lubricant Pump
New Ican Hand Lubricant Pump

Ican model 001083
Hand pump for plastic oil containers
New in bag

New Ican Hand Lubricant Pump
New Ican Hand Lubricant Pump

Ican model 001083
Hand pump for plastic oil containers
New in bag

3x 400mm Load Binders, New
3x 400mm Load Binders, New

3x 400mm Load Binders, New.
Unknown manufacturer or specs.
Main handle section is approx 400mm in length.
Gap between hooks is approx 12mm.
All three units are new in manufacturer packaging.

New Ican Hand Lubricant Pump
New Ican Hand Lubricant Pump

Ican model 001083
Hand pump for plastic oil containers
New in bag

New Ican Hand Lubricant Pump
New Ican Hand Lubricant Pump

Ican model 001083
Hand pump for plastic oil containers
New in bag

New Ican Hand Lubricant Pump
New Ican Hand Lubricant Pump

Ican model 001083
Hand pump for plastic oil containers
New in bag

Ridgid No. 35 Hex Wrench
Ridgid No. 35 Hex Wrench

Ridgid No. 35 Hex Wrench.
Made in USA.

Assorted Genuine CAT Caterpillar OEM Parts, Bearings, Lifter, Rocker
Assorted Genuine CAT Caterpillar OEM Parts, Bearings, Lifter, Rocker

Assorted Genuine CAT Caterpillar OEM Parts, Bearings, Lifter, Rocker.
Includes the following part numbers:
- Bearing 4P-0984
- Bearing 4P-0985
- Bearing 4P-0986
- Lifter Roller 269-2735
- UI Rocker Pin 437-3859
Items are opened but unused leftover parts supply stock.

PDL Variable Speed Drive
PDL Variable Speed Drive

Model: PDL Microflo MF3-6.5
Three phase 6.5 amp

Holset Turbocharger Assembly 3803119 for Caterpillar KTA19 Engines
Holset Turbocharger Assembly 3803119 for Caterpillar KTA19 Engines

Holset Turbocharger Assembly 3803119 for Caterpillar KTA19 type Engines.
ID plate is also stamped with the following numbers:
- 18053875
- HC5A
Assembly is new never installed leftover parts supply stock.

Large Industrial Cooling Fan
Large Industrial Cooling Fan

Imasu brand
800mm diameter
On wall mount
Will be removed for collection

Large Industrial Cooling Fan
Large Industrial Cooling Fan

Imasu brand
800mm diameter
On wall mount
Will be removed for collection

Large Industrial Cooling Fan
Large Industrial Cooling Fan

Imasu brand
700mm diameter
On wall mount
Will be removed for collection

Large Industrial Cooling Fan
Large Industrial Cooling Fan

Imasu brand
700mm diameter
On pole mount
Will be removed for collection

Large Box of Filters
Large Box of Filters

Dinet 59 3355 10DIN oil filters
Approx 110 total
Hengst E416H D86
Hengst E416KP D36

Turbocharger Assembly for Cummings Diesel Engine K19, as new
Turbocharger Assembly for Cummings Diesel Engine K19, as new

Turbocharger Assembly for Cummins Diesel Engine K19 HC5A.
OEM No. 3803119.
Serial No. 13072505.
Condition - Leftover unused never installed parts supply stock. Some light rust spotting on mounting surface from storage.

Electric Concrete Mixer
Electric Concrete Mixer

Model: Spomasz-Blatystok BS125 Drum Mixer
Manufactured 1994
600mm drum diameter
On wheels
Single phase

To see this machine running:
https://youtu.be/2X-ulAnSzTc

Custom Desktop Midtower Computer w/ Intel Core i5 & Monitor
Custom Desktop Midtower Computer w/ Intel Core i5 & Monitor

Custom Desktop Midtower Computer w/ Intel Core i5 & Monitor.
Processor - Intel Core i5-2400 at 3.20GHz.
4Gb RAM
500Gb storage drive, wiped of old user data and operating system.
Microsoft Windows 7 Pro reinstalled and ready for new user setup, product key sticker code is attached to case.
Cooler Master Midtower case.
Cooler Master 460W PSU.
Gigabyte GA-Z68MA-D2H-B3 motherboard.
Samsung 22" monitor Model S22A100N.
Logitech USB keyboard and mouse.
Includes power cables, and D-Sub cable.
Condition - Dusty interior. Exterior scratches, wear marks, dust etc.

4 x Bays Pallet Racking
4 x Bays Pallet Racking

Capital style pallet racking
34 x 2780mm long crossbeams
5 x 4000mm tall x 900mm wide uprights
Tombstone style fittings
Feet and lower legs very rusty
Buyer to disassemble

Brother QL-570 Professional Label Printer
Brother QL-570 Professional Label Printer

Brother QL-570 Professional Label Printer.
Prints on labels up to 62mm wide.
Includes USB cable and power cord.
Feed and cut functions tested and operate. Printing functions not tested.
Software not included.

2 x Super Charge 24v Chargers
2 x Super Charge 24v Chargers

Model: Super Charge 2410MASTPP
24 volt
No power plugs or alligator clips
Unknown operating condition

SMC Wired EZ Card PCI Card 1000Mbps Copper Gigabit Adapter, New
SMC Wired EZ Card PCI Card 1000Mbps Copper Gigabit Adapter, New

SMC Wired EZ Card PCI Card 1000Mbps Copper Gigabit Adapter.
Model No. SMC9452TX-2.
New in unopened box.

Large Lot of Parts Bins and Parts
Large Lot of Parts Bins and Parts

Assorted plastic parts bins
Contents of nuts, bolts, bearings and more

Large Steel Workbench
Large Steel Workbench

3mm steel top with rolled front edge
860mm worktop height
150mm back guard
Angle steel frame
Shelf underneath

Generator Control Box
Generator Control Box

Petrol/Diesel generator control box
Variety of gauges
Emergency stop switch
Hour clock

Steel Workbench with Vice
Steel Workbench with Vice

3mm steel top with rolled front edge
860mm worktop height
150mm back guard
Angle steel frame
Shelf underneath
Irwin Record No.5 130mm vice

Low Heavy Duty Workshop Mobile Shelf Trolley
Low Heavy Duty Workshop Mobile Shelf Trolley

Low Heavy Duty Workshop Mobile Shelf Trolley.
Steel bar frame with 3mm thick steel plate top and lower surfaces.
Mounted on heavy Duty 95mm diameter Castors.
Shows typical industrial Workshop usage and wear.
Items seen on trolley are not included.

Three Phase Petrol Generators
Three Phase Petrol Generators

Kohler 16hp petrol engine
Model K341S
Brush 10kva 3 phase A.C. generator
Unknown condition
Partially disassembled

Low Heavy Duty Workshop Platform Trolley
Low Heavy Duty Workshop Platform Trolley

Low Heavy Duty Workshop Platform Trolley.
Heavy Steel frame with 3mm thick steel plate top surface.
200mm diameter heavy duty Castors.
Note - Items seen on trolley are not included.

Steel Drum / Tank Trolley
Steel Drum / Tank Trolley

Steel Drum / Tank Trolley.
Low wheeled Trolley frame to support standard 205L steel drums/tanks or similar items.
75mm diameter Castors.
Condition - Trolley is very oily and greasy but rolls smoothly.

Workshop Sack Barrel Tank Trolley
Workshop Sack Barrel Tank Trolley

Workshop Sack Barrel Tank Trolley.
150mm diameter solid rubber wheels.
Lifting plate approx 390x290mm with steel support for holding tanks or similar objects.
Some rusty surfaces, grime from workshop usage

875mm Tall Aluminium Step Ladder
875mm Tall Aluminium Step Ladder

875mm Tall Aluminium Step Ladder.
Unknown manufacturer and weight specs.
Steps on both sides.
Very dirty surfaces. Ladder feels sturdy though one folding side bar is missing, see photos.

Assorted Lathe Tooling
Assorted Lathe Tooling

Assorted older style lathe tooling
Parting tool holder
Jones and Shipman 230mm long tool holder

Low Heavy Duty Workshop Mobile Shelf Trolley
Low Heavy Duty Workshop Mobile Shelf Trolley

Low Heavy Duty Workshop Mobile Shelf Trolley.
Steel bar frame with 3mm thick steel plate top and lower surfaces.
Mounted on heavy Duty 100mm diameter Castors.
Shows typical industrial Workshop usage and wear.
Items seen on trolley are not included.

Steel Topped Workshop Workbench Table
Steel Topped Workshop Workbench Table

Steel Topped Workshop Workbench Table.
Sterl frame with 2mm thick steel top surface and backside panel.
Painted MDF board lower shelf.

11 Assorted Lathe Tools
11 Assorted Lathe Tools

Assorted lathe tooling
Mostly old english

Heavy Duty Steel Topped Workbench Table
Heavy Duty Steel Topped Workbench Table

Heavy Duty Steel Topped Workbench Table.
Heavy steel frame with approx 3mm thick steel top.
Condition - Some welds on frame are rusted and caracked, may need re-welding in areas. Some rust on top surface, bent corners.

Large Lathe Turning Tool
Large Lathe Turning Tool

Sandvik T-Max CRGNR 3232P 12C
32mm shank

2 Large Lathe Tool Holders
2 Large Lathe Tool Holders

Jones and Shipman lathe tool holders
45mm x 25mm shanks
240mm long
Left and right handed

Heavy Duty Steel Topped Workbench
Heavy Duty Steel Topped Workbench

Heavy Duty Steel Topped Workbench.
Heavy steel frame with 5mm thick steel plate top surface.
MDF board lower shelf.
Includes attached vice.
Total Workbench length including vice is approx 2770mm.

Hand Linisher
Hand Linisher

Linisher powered by angle grinder
Grinder has power cable cut off
Arm unscrewed from power unit
Some belts
Needs repairs

Large Wooden Workbench
Large Wooden Workbench

Large timber bench
Thin panel steel cover over top
850mm worktop height
Back board with shelving
Shelves underneath

2 x Mobile Ply Panels
2 x Mobile Ply Panels

Steel frames
Ply panels
On heavy duty swivel castors
Each panel 1860mm wide x 1690mm tall

Metal Shear on Stand
Metal Shear on Stand

Bench mounted metal shear
Installed on pedestal base
150mm cutting length

Hobart TIG Welder
Hobart TIG Welder

Model: Hobart TR-250-HF
250 amp welding power source
TIG and Arc
Setup for TIG with torch
Rental bottle not included
Regulator
Manual
Foot controller
Is currently hard wired, will be disconnected for collection

Scheppach BG200 Bench Grinder
Scheppach BG200 Bench Grinder

Scheppach BG200 Bench Grinder.
Single phase.
Uses 200mm diameter Grinding wheels.
Built in worklight.
2850rpm.
Condition - Grinder operates. Safety guards missing over both Grinding platforms.

Fronius TIG/MIG Welder
Fronius TIG/MIG Welder

Model:: Fronius Trans Pulse Synergic TPS330
Three phase
Fronius FK71 cooling unit
Fronius VR152 wire feeder
330 amp max welding output
Mig gun
TIG torch
Arc electrodes
On wheels

Worksite Halogen Lights on Stand by Somic
Worksite Halogen Lights on Stand by Somic

Worksite Halogen Lights on Stand by Somic.
Item No. LI0501015T.
2x 50W max halogen lights.
Adjustable height folding stand.
Individual on/off switch for each light.
Condition - Both lights operating. Dusty surfaces from workshop usage.

Large Flat Surface Grinder
Large Flat Surface Grinder

Model: MAS BRV-30 Flat Surface Grinder
Three phase
1000mm x 300mm magnetic chuck
310mm diameter segment type grinding head
2000mm long grinding bay
1450 rpm grinding head
Runs well but coolant pump untested

To see a video of this machine running:
https://youtu.be/UvKMsYl1YJY

Heavy Duty Mobile Specialised Trolley
Heavy Duty Mobile Specialised Trolley

Heavy Duty Mobile Specialised Trolley.
Heavy steel frame with steel Castors.
Main stationary platform approx 735x540mm and 955mm above floor.
Smaller platform attached to treaded rod for adjusting height, see photos.
Unsure as to its intended purpose, see photos for further trolley design details.
Condition - Some rusting to components..

Cast Lapping Plate
Cast Lapping Plate

Cast Lapping Plate
285mm x 285mm
In case

Small Lapping Plate
Small Lapping Plate

Small cast lapping plate
175mm x 130mm
In wooden case

Mutoh Drafter RE2 Drafting Table w/ Light, no support frame
Mutoh Drafter RE2 Drafting Table w/ Light, no support frame

Mutoh Drafter RE2 Drafting Table w/ Light.
Drafting surface approx 1500x1000mm.
500mm long transparent ruled Straight Edges.
Includes Mutoh Flourecent light unit LF-20.
Condition - Drafting Table, ruler guide mechanism and lighting unit included only, support frame is missing. Vinyl Drafting surface is loose from backing board. Dirty and scratched surface.

Glass Lapping Plate
Glass Lapping Plate

Glass lapping plate in wooden case
300mm x 300mm

Wooden Expandable Dining Table
Wooden Expandable Dining Table

Wooden Expandable Dining Table.
Wood construction, wood type unknown, see photos for details on wood grain.
Expandable with centre section folding away underneath.
Extended table length is approx 2200mm, shortened table length approx 1700mm.
Condition - Some scratches to wood surfaces, wear and use marks in clearcoat varnish. Table may benefit from a mild sanding and restoration.

Pulsi 12v Fuel Pump
Pulsi 12v Fuel Pump

Model: Pulsi 000363020
12 volt diesel delivery pump

Pneumatic Oil Pump
Pneumatic Oil Pump

Model: Samoa Pump Master 2
Air operated oil drum pump

Office Desk Workstation Mounted Shelving Unit
Office Desk Workstation Mounted Shelving Unit

Office Desk Workstation Mounted Shelving Unit.
Faux Wood Laminated MDF construction.
Some surface scratches, use marks.

2x Office Mobile Drawer File Units
2x Office Mobile Drawer File Units

2x Office Mobile Drawer File Units.
MDF construction with grey laminate surfaces.
One unit is Lockable, key is missing.
Both units mounted on Castors.
Condition - Some dusty surfaces, marks on laminate, one unit has large sticker residue on front

Large Plastic Ute Toolbox
Large Plastic Ute Toolbox

Waltex Ute/Truck toolbox
Gas strut lid
Lockable but no key

Single Drawer File Cabinet by Precision
Single Drawer File Cabinet by Precision

Single Drawer File Cabinet by Precision.
Lockable, key is missing.
Some finish wear, rust spotting from age and use.

Contemporary White Metal Office Mobile Drawer File Unit
Contemporary White Metal Office Mobile Drawer File Unit

Contemporary White Metal Office Mobile Drawer File Unit.
Unknown manufacturer.
Metal construction with matte white finish.
Lockable drawers, key is included.
Mounted on Castors.
Condition - Some finish wear on edges, some scratching. Some dust, grime on finish, may benefit from a clean.

Generator Testing Load Bank
Generator Testing Load Bank

Model: Taylors Electric Hot Water Boiler Load Bank
60 kw capacity
10,5,2 and 1kw incriminating switches
On wheels

2-Drawer File Cabinet by Europlan
2-Drawer File Cabinet by Europlan

2-Drawer File Cabinet by Europlan.
Lockable, keys are missing.

Tramo Transformer
Tramo Transformer

Model: Tramo TFT23114
65 kva
220-600 v

3-Drawer File Cabinet by Precision
3-Drawer File Cabinet by Precision

3-Drawer File Cabinet by Precision.
Lockable, keys are missing.
Cabinet shows moderate wear and usage. Lower drawer missing handle. Finish scratches, some denting.

Large Sandblasting Pot
Large Sandblasting Pot

Heavy steel sandblasting pot
Pot approx 800mm tall x 400mm diameter

Europlan Eurotilt Tilt Door File Cabinet
Europlan Eurotilt Tilt Door File Cabinet

Europlan Eurotilt Tilt Door File Cabinet.
Lockable, keys are missing.
Some finish scratches and wear marks.

Workshop Sack Barrel 2-Wheel Trolley
Workshop Sack Barrel 2-Wheel Trolley

Workshop Sack Barrel 2-Wheel Trolley.
Solid rubber 190mm diameter wheels.
Lifting base is approx 300x210mm.
Trolley shows moderate Workshop wear and usage.

A.M.C. Crankshaft Grinder
A.M.C. Crankshaft Grinder

Model: Aarhus Motor Compagni K.3000
Max capacity grinding length 3170mm
Max swing 730mm
EAM Stop Cut Gauge & flying micrometre for measuring while grinding
Mitutoyo KA-12 Digital Read Out
spare wheel hubs
6 x grinding wheels
Grinding wheel balancer
335mm bed lifting height spacers
2 x new oversize 1400mm Noritake grinding wheels
Oversize guard for large wheels
Modernised with T-verter K1 26 amp variable speed drive to optimise grinding speed
Manuals
New Zealand's largest capacity crankshaft grinder

To see this machine running
https://youtu.be/XjZeQVD0L6Y

CAT Caterpillar Engine Injector Timing Kit
CAT Caterpillar Engine Injector Timing Kit

CAT Caterpillar Engine Injector Timing Kit.
Kit number unknown.
See photos for details on Included components.
Includes Steel case.

Large L-Shaped Corner Steel Workbench
Large L-Shaped Corner Steel Workbench

Large L-Shaped Corner Steel Workbench.
Item is two workbenches that have been Welded together to form a very large corner Workbench..
3mm thick steel sheet top work surfaces.
Work surface approx 905mm above floor.
Lower plywood shelves.
650mm high backboard wall surrounding the majority of the Workbench.
Includes attached vice.
Includes attached Flourecent lights.
Attached small 600x355x240mm cubby for manuals etc.
Note - all other items seen on or nearby Workbench are not included.

Workshop Partial Covered Workbench / Spray Booth
Workshop Partial Covered Workbench / Spray Booth

Workshop Partial Covered Workbench / Spray Booth.
Front opening is approx 1350mm wide, 1015mm high.
Built in Flourecent light fixture with single phase plug.
Steel bar frame with sheet steel sides.
Work surface appears to be plywood or MDF board with thin vinyl top cover.
Work surface approx 955mm above floor.

Steel Workbench with Vice
Steel Workbench with Vice

3mm steel top with rolled front edge
Angle steel frame
Wooden shelf
125mm vice

Valve Guide Installation Kit
Valve Guide Installation Kit

Kline valve guide Installation kit
11mm
In case

Valve Guide Installation Kit
Valve Guide Installation Kit

Kline valve guide Installation kit
9mm
Unknown if complete
In drawer

Valve Guide Installation Kit
Valve Guide Installation Kit

Kline valve guide Installation kit
7mm
In drawer unit

Valve Guide Installation Kit
Valve Guide Installation Kit

Kline valve guide Installation kit
8mm
In case

Medium Duty Steel Workshop Adjustable Shelving Unit
Medium Duty Steel Workshop Adjustable Shelving Unit

Medium Duty Steel Workshop Adjustable Shelving Unit.
2220mm tall vertical support columns.
4x adjustable shelves each approx 910x610mm.
Note - Other items seen around and on Shelving unit are not included.
Shelving can be dissasembled for buyer to transport.

Valve Guide Installation Kit
Valve Guide Installation Kit

Kline valve guide Installation kit
5/16"
In case

Valve Guide Installation Kit
Valve Guide Installation Kit

Kline valve guide Installation kit
3/8"
In case

Valve Guide Installation Kit
Valve Guide Installation Kit

Kline valve guide Installation kit
11/32"
In case

Falcon Surface Grinder
Falcon Surface Grinder

Model: Falcon (Chevalier) FSG-3A20
Three phase
Hydraulic surface grinder
Working surface 200mm x 460mm
Table travel longitudinal 536mm Crossfeed 235mm
Max spindle centre to table 365mm
Powerfeeds both axis 1.5hp spindle motor
Hydraulic pump
200mm grinding wheel
Magnetic table
Manual

To see this machine running:
https://youtu.be/jOjiaWA748c

Heavy Duty Workshop Table Workbench
Heavy Duty Workshop Table Workbench

Heavy Duty Workshop Table Workbench.
75x75mm heavy Steel frame.
19mm thick MDF board top.
Note - Items seen on and around table are not included.

Heavy Duty Mobile Workshop Adjustable Storage Shelf Trolley
Heavy Duty Mobile Workshop Adjustable Storage Shelf Trolley

Heavy Duty Mobile Workshop Adjustable Storage Shelf Trolley.
Heavy duty steel frame.
Adjustable shelves supported by removable 22mm diameter steel rods, see photos.
Plywood shelf inserts.
100mm diameter heavy duty castor wheels.
Solid heavy duty versitile unit.

Heavy Duty Mobile Workshop Adjustable Storage Shelf Trolley
Heavy Duty Mobile Workshop Adjustable Storage Shelf Trolley

Heavy Duty Mobile Workshop Adjustable Storage Shelf Trolley.
Heavy duty steel frame.
Adjustable shelves supported by removable 19mm diameter steel rods, see photos.
Plywood shelf inserts.
125mm diameter heavy duty castor wheels.
Solid heavy duty versitile unit.

Heavy Duty Mobile Workshop Adjustable Storage Shelf Trolley
Heavy Duty Mobile Workshop Adjustable Storage Shelf Trolley

Heavy Duty Mobile Workshop Adjustable Storage Shelf Trolley.
Heavy duty steel frame.
Adjustable shelves supported by removable 22mm diameter steel rods, see photos.
Plywood shelf inserts.
100mm diameter heavy duty castor wheels.
Solid heavy duty versitile unit.

Cylinder Head Pressure Testing Rig
Cylinder Head Pressure Testing Rig

Steel cylinder head mounting frame
1190mm x 440mm internal capacity
On rotating mount
Metal shelving unit
1580mm x 400mm x 1130mm tall
Wide range of head adapter plates and accessories

Heavy Duty Mobile Workshop Storage Shelf Trolley
Heavy Duty Mobile Workshop Storage Shelf Trolley

Heavy Duty Mobile Workshop Storage Shelf Trolley.
Heavy duty steel frame. .
Plywood and MDF shelves.
125mm diameter heavy duty castor wheels.
Solid heavy Duty unit.

Heavy Duty Mobile Workshop Storage Shelf Trolley
Heavy Duty Mobile Workshop Storage Shelf Trolley

Heavy Duty Mobile Workshop Storage Shelf Trolley.
50x50mm square steel bar frame.
18mm thick plywood shelves.
160mm diameter heavy duty castor wheels.
Solid heavy Duty unit.

Morgan Superwool Blanket
Morgan Superwool Blanket

Morgan Superwool Plus Blanket
50 x 610 x 3660
Density 96kg/M3
New in box

Berco Line Boring Machine
Berco Line Boring Machine

Model: Berco BC-5 Line Boring Machine for Main and Crankshaft Bearings
Max cylinder block length 2600mm
Bed to boring bar
Max: 820mm
Min: 510mm
12 spindle speeds
75, 85, 115, 130, 180, 210, 280, 325, 430, 500, 680, 800 rpm
Automatic spindle work feed
.75 kw motor
Central support rest
Three sets supports
80mm, 200mm, 300mm
6 x boring bars
2870mm x 60mm
1800mm x 40mm
1900mm x 50mm
1980mm x 31.6mm
1980mm x 31.6mm
1520mm x 31.6mm
Manuals
Adapter collets
Trolley
Micrometers

To see this machine running:
https://www.youtube.com/watch?v=mciwzPAC6LA

30+ Assorted Imperial & Metric Sockets, Breaker Bars, & More
30+ Assorted Imperial & Metric Sockets, Breaker Bars, & More

30+ Assorted Imperial & Metric Sockets, Breaker Bars, & More.
Includes 26x Assorted sockets in imperial and Metric Sizes. All appear to be 3/4" Drive size. Brands include Gift, King Tony, Tone, Kokon, and unbranded. Sizes range from 22mm up to 2 3/4 Inch.
Includes 2x 3/4 drive Breaker Bars.
Includss one spin Wrench.
Includes one large Allen Hex Key
Condition varies with each item.

Sunnen Honing Machine and Accessories
Sunnen Honing Machine and Accessories

Model: Sunnen 650D
Single phase
1/4hp electric motor
Foot controller
Custom stand
Huge range of hones and accessories
Large box of stones
Motor gets hot when running, needs attention

To see a video of this machine running:
https://youtu.be/-emNPoIvGQo

Large Tread Repair Kit w/ Assorted Threaders, Inserts, & More
Large Tread Repair Kit w/ Assorted Threaders, Inserts, & More

Large Tread Repair Kit w/ Assorted Threaders, Inserts, & More.
Includesrhe following Full Torque branded items:
- #3 Morse Taper driver extention FTDEXT
- size 11 finishing tap FT11FT
- size 11 roughing tap FT11RT
- spade drill Holder FTSDH1013.
- 3x thread repsi inserts MM091304A.
Includes other items including l:
- 2x Lock-N-Switch C4PSF Piloted Spot facer Cast master.
- 6x other assorted tapers, bolt, etc,
Includes hard case.
Condition - Many items appear as new, unused. A few loose items show some usage. Case shows wear.

Steel Workshop Trolley
Steel Workshop Trolley

3mm steel top
Box steel frame
Swivel wheels one end fixed the other

Steel Workbench
Steel Workbench

3mm steel top with rolled front edge
Angle steel frame
Worktop height 850mm
Heavy duty timber shelf
760mm tall back board

Air Hose Reel
Air Hose Reel

Self retracting hose reel
Has been modified to retract from underneath
Mechanism is weak

Large Steel Workbench with Vice
Large Steel Workbench with Vice

Very large workbench
3mm steel top with rolled front edge
Angle steel frame
Heavy duty timber shelf the full length
Record 36P 150mm metal vice

Large Steel Cupboard
Large Steel Cupboard

Steel storage cabinet
5 levels

Large Industrial Parts Wash
Large Industrial Parts Wash

Large Industrial parts washer
Three phase
Fold down door
Cleaner liquid tank underneath
Internal dimensions
1450mm wide x 1450mm deep x 1250mm tall
1210mm diameter parts tray
Runs on rails for easy external access
Two rotary cleaning arms
Rarely available in this size

Mitutoyo Imperial Depth Micrometer w/ 2x Telescopic Gauges
Mitutoyo Imperial Depth Micrometer w/ 2x Telescopic Gauges

Mitutoyo Imperial Depth Micrometer w/ 2x Telescopic Gauges.
Unknown Mitutoyo model number of depth Micrometer. Includes case with assorted accessories, see photo.
Auction also includes 2x Mitutoyo Telescopic Gauges D and E.
Condition - Shafts on Telescopic Gauges show rust spotting. Depth gauge case exterior shows moderate Workshop wear.

Protool Heavy Duty Drill on Stand
Protool Heavy Duty Drill on Stand

Protool DRP 32-4 heavy duty drill
Single phase
1700 watt
4 speed gearbox
Fire currently fitted with 16mm drill chuck
On adjustable height stand
Manual

3x NSK 4" Imperial Outside Micrometers & 1x Mitutoyo Imperial Gauge Set
3x NSK 4" Imperial Outside Micrometers & 1x Mitutoyo Imperial Gauge Set

3x NSK 4" Imperial Outside Micrometers & 1x Mitutoyo Imperial Gauge Set.
Includes the following:
- 3x NSK branded imperial Outside Micrometers 3" to 4", part No YAB 05-I.
- 1x Mitutoyo Imperial Gauge set with 5, 4, 3, and 2 inch Gauges.

Dexion Workshop Shelving
Dexion Workshop Shelving

Bolt together shelving
Dexion 140

Steel Workshop Trolley
Steel Workshop Trolley

3mm steel top
Box steel frame
Swivel wheels one end fixed the other

Steel Workshop Cupboard and Contents
Steel Workshop Cupboard and Contents

Angle steel frame
3mm steel sides and top
Contents of steel blocks

M&W Moore & Wright 12" to 16" Imperial Outside Micrometer
M&W Moore & Wright 12" to 16" Imperial Outside Micrometer

M&W Moore & Wright 12" to 16" Imperial Outside Micrometer.
Part No. 1040.
Includes wood case.
Latches on wood case are broken off.

Steel Workshop Trolley
Steel Workshop Trolley

3mm steel top
Box steel frame
Heavy duty swivel wheels

Imperial Outside Micrometer Set, 0" to 6" Range
Imperial Outside Micrometer Set, 0" to 6" Range

Imperial Outside Micrometer Set, 0" to 6" Range.
Unknown manufacturer.
Made in China.
Includes the following ranges:
- 0 to 1 inch
- 1 to 2 inch
- 2 to 3 inch
- 3 to 4 inch
- 4 to 5 inch
- 5 to 6 inch
Includes wood case.
Condition - Wood case is missing its lid. All test blocks are missing. Some rust spotting on Micrometer shafts.

Small Steel Trolley
Small Steel Trolley

3mm steel top
Box steel frame
Heavy duty swivel wheels

Three Phase Extension Cord
Three Phase Extension Cord

15 metre three phase cable
30 amp male plug
20 amp female plug

M&W Moore & Wright Imperial 6" to 7" Inside Micrometer w/ Wood Case
M&W Moore & Wright Imperial 6" to 7" Inside Micrometer w/ Wood Case

M&W Moore & Wright Imperial 6" to 7" Inside Micrometer with Wood Case.
Tool shows very light signs of usage. Case exterior shows more wear from workshop storage.

Three Phase Extension Cord
Three Phase Extension Cord

10 metre extension cord
32 amp plugs
Broken cover on female plug

Plate Steel Welding Bench with Vice
Plate Steel Welding Bench with Vice

12mm plate steel top
Box steel legs
150mm vice

Small Milling Machine Vice
Small Milling Machine Vice

Unbranded
90mm wide jaws
Max opening 75mm

Volvo VCADS Pro Engine Diagnostic Interface Kit 999 8555
Volvo VCADS Pro Engine Diagnostic Interface Kit 999 8555

Volvo VCADS Pro Engine Diagnostic Interface Kit 999 8555.
Includes diagnostic unit, data link cables, PC cable, hard case.
Note - PC software Disk is missing.

2 Pallets Steel Bits and Pieces
2 Pallets Steel Bits and Pieces

Assorted steel industrial fittings
Boxes of large bolts and nuts
Gears
Large diameter rod
Two large round flat plates
Two shaft stands

2 Pallets Cylinder Sleeves
2 Pallets Cylinder Sleeves

Various large cylinder sleeves
Most appear used

Cummins Torque Plate
Cummins Torque Plate

Torque plate for Cummins B-series engines

Small Cooling Tower
Small Cooling Tower

Mesan Cooling Tower
Model: MS-8
No motor or accessories
Housing only

200 Litre Drum Castrol Coolant
200 Litre Drum Castrol Coolant

Castrol Premium Cool Plus 50
New 205 litre drum
For specs:
https://www.castrol.com/en_nz/new-zealand/home/products/truck-and-bus/coolants.html#tab_premium-plus

Long Steel Workbench
Long Steel Workbench

3mm sheet steel top
Angle steel frame
Shelving

Pelican 1600 High Impact Tough Case
Pelican 1600 High Impact Tough Case

Pelican 1600 High Impact Tough Case.
Interior dimensions 544x419x200mm.
Top and bottom foam padding.
Condition - Exterior shows moderate wear and usage. Interior shows wear.

Part 200 Litre Drum Bel-ray Oil
Part 200 Litre Drum Bel-ray Oil

Bel-ray Raylene Ultra SAE 15W-50
Approx 2/3rds full 208 litre drum

Heavy Duty Steel Workshop Workbench
Heavy Duty Steel Workshop Workbench

Heavy Duty Steel Workshop Workbench.
Steel bar frame with 3mm thick steel plate top surface.
Wood board lower shelf.
Main work surface approx 850mm above floor.
150mm high rear Backsplash
Note - all other Items seen on and around Workbench are not included.

Part 200 Litre Drum Castrol Oil
Part 200 Litre Drum Castrol Oil

Castrol Vectron 15W-40 CL-4 PLUS SL/E7
Approx 1/3 of a drum left
For specs
https://www.rdp.co.nz/products/castrol/castrol-vecton-15w-40-cl-4-plus-sl-e7

200 Litre Drum Mobil Oil
200 Litre Drum Mobil Oil

Mobil Pegasus 610
Gas engine oil
Full 208 litre drum
For specs:
https://www.mobil.com/en-ca/industrial/pds/gl-xx-mobil-pegasus-610

200 Litre Drum Mobil Oil
200 Litre Drum Mobil Oil

Mobil Pegasus 610
Gas engine oil
Full 208 litre drum
For specs:
https://www.mobil.com/en-ca/industrial/pds/gl-xx-mobil-pegasus-610

1050mm Bolt Cutter by Hit
1050mm Bolt Cutter by Hit

1050mm Bolt Cutter by Hit.
40mm long Jaws.
Manufactured by Hit.

200 Litre Drum Mobil Oil
200 Litre Drum Mobil Oil

Mobil Pegasus 610
Gas engine oil
Full 208 litre drum
For specs:
https://www.mobil.com/en-ca/industrial/pds/gl-xx-mobil-pegasus-610

Double Sided Light Duty Workshop Storage Shelf Unit
Double Sided Light Duty Workshop Storage Shelf Unit

Double Sided Light Duty Workshop Storage Shelf Unit
Laminated MDF construction.
Non-adjustable shelves on both sides.
Angled top surface.
Note - Items seen on shelves are NOT Included.
Condition - Some damage to MDF. One side has collapsed bottom from apparently too much weight added in its past. Would need some repair. Surface dust and grime from workshop usage.

200 Litre Drum Mobil Oil
200 Litre Drum Mobil Oil

Mobil Pegasus 610
Gas engine oil
Full 208 litre drum
For specs:
https://www.mobil.com/en-ca/industrial/pds/gl-xx-mobil-pegasus-610

Assorted 1" Drive Sockets & Extensions, Metric & Imperial Sizes
Assorted 1" Drive Sockets & Extensions, Metric & Imperial Sizes

Assorted 1" Drive Sockets & Extensions, Metric & Imperial Sizes.
Most items are unbranded with a few branded items mixed in.
Chrome Vanadium Steel.
Includes the following socket sizes:
- 3 1/4" (Kokon branded)
- 77mm
- 75mm
- 71mm
- 70mm
- 67mm
- 65mm
- 63mm
- 58mm
- 50mm
- 46mm
- 41mm
- 38mm
- 36mm (Gift branded)
- 200mm long extension
- 400mm long extension.
Steel case (missing its lid)

Steel Workbench
Steel Workbench

3mm steel top
Rolled edge
Angle steel frame
Shelf

Huge Lot of Puller Parts
Huge Lot of Puller Parts

Large selection of puller parts
410mm diameter 40mm thick plate
6 leg bases
Numerous extension rods
9 various sets of arms
Longest 530mm
Smallest 100mm
Parts from a wide range of sets

Blackberry Z30 Mobile Smart Phone, 16Gb
Blackberry Z30 Mobile Smart Phone, 16Gb

Blackberry Z30 Mobile Smart Phone.
16Gb storage
OS version 10.3.2.2867.
Includes micro USB Cable and wall charger. No other accessories included.
Phone is not set to any service provider.
Phone has been wiped and reset to factory settings.
Condition - Some external scratches, wear and usage marks.

W&P 500ft/lbs Torque Wrench, 1" Driver Head
W&P 500ft/lbs Torque Wrench, 1" Driver Head

500ft/lbs Torque Wrench.
1" Driver Head.
W&P branded.
Total tool length 900mm.

2 x Large Bearing Pullers
2 x Large Bearing Pullers

200mm and 250mm wide
One missing a threaded rod

Large 3/4" Drive Torque Wrench, 1150mm length
Large 3/4" Drive Torque Wrench, 1150mm length

Large 3/4" Drive Torque Wrench, 1150mm length.
ID label is worn off so manufacturer, model and torque specs are unknown.
1150mm in length.
3/4" Drive head.
Slight bend to handle.

Hydraulic Cylinder
Hydraulic Cylinder

Unknown make, model or specifications
100mm diameter
160mm long

30 Ton Hydraulic Press
30 Ton Hydraulic Press

Concord Tooling Hydraulic Press
Dual power sources
Enerpac PER-1621 single phase hydraulic power pack
Enerpac P-30 manual hydraulic power pack
Fixed height table
150mm maximum ram extension
75mm diameter ram
730mm x 275mm x 40mm thick plate
On heavy duty wheels

To see this machine running:
https://youtu.be/oSiJhgkpu90

Powerbuilt 3-Ton Trolley Floor Jack
Powerbuilt 3-Ton Trolley Floor Jack

Powerbuilt 3-Ton Trolley Floor Jack.
Lifting range from 139mm to 495mm.
Lifting cup approx 115mm diameter.

Heavy Duty Steel Workshop Workbench / Shelving Unit
Heavy Duty Steel Workshop Workbench / Shelving Unit

Heavy Duty Steel Workshop Workbench / Shelving Unit.
Great multi purpose unit that can be used either as a workbench or as heavy duty storage shelving, or a combination of the two.
Steel bar frame with 3mm thick steel plate top surface.
Wood board lower shelves.
Note - all other Items seen on and around unit are not included.

Heavy Duty Steel Workshop Workbench
Heavy Duty Steel Workshop Workbench

Heavy Duty Steel Workshop Workbench.
Steel bar frame with 3mm thick steel plate top surface.
Wood board lower shelf.
Main work surface approx 855mm above floor.
Rear back board for hanging tools etc rises 650mm.over work surface.
Note - all other Items seen on and around Workbench are not included.

Heavy Duty Steel Workshop Workbench
Heavy Duty Steel Workshop Workbench

Heavy Duty Steel Workshop Workbench.
Steel bar frame with 3mm thick steel plate top surface.
Wood board lower shelf.
Main work surface approx 850mm above floor.
Rear Backsplash 150mm high.
Cloth side curtains for consealing items on lower shelf.
Note - all other Items seen on and around Workbench are not included.

Heavy Duty Steel Workshop Workbench
Heavy Duty Steel Workshop Workbench

Heavy Duty Steel Workshop Workbench.
Steel bar frame with 3mm thick steel plate top surface.
Wood board lower shelf.
Main work surface approx 855mm above floor.
Rear back board for hanging tools etc rises 650mm.over work surface.
Includes attached Record No. 5 bench vice.
Cloth side curtains for consealing items on lower shelf.
Note - With exception of the vice, all other Items seen on and around Workbench are not included. Oiling pump seen attached to backboard is not included.

Large Steel Workbench with Vice
Large Steel Workbench with Vice

3mm steel top
Angle steel frame
Wooden shelf
850mm worktop height
Record No.6 vice (150mm)

Low Heavy Duty Workshop Mobile Shelf Trolley
Low Heavy Duty Workshop Mobile Shelf Trolley

Low Heavy Duty Workshop Mobile Shelf Trolley.
Steel bar frame with MDF board top surface.
Mounted on heavy Duty 145mm diameter Castors.
Shows typical industrial Workshop usage and wear.

Harrison 13 Inch Lathe
Harrison 13 Inch Lathe

Model: Harrison M300 13" Lathe
Bed length 1440mm
Distance between centers 1000mm
Swing over bed 330mm
Swing over gap 480mm
Spindle bore 38mm
210mm long gap
2.2kw main motor
12 spindle speeds
40rpm - 2500rpm
Metric and imperial thread cutting
Taper cutter
Foot brake
Quick change tool post
Centre
160mm diameter three jaw chuck
200mm diameter four jaw chuck
300mm diameter face plate
Steady off another machine
Manuals

To see a video of this machine running:
https://youtu.be/0X2DZWnUGmI

Low Heavy Duty Workshop Mobile Shelf Trolley
Low Heavy Duty Workshop Mobile Shelf Trolley

Low Heavy Duty Workshop Mobile Shelf Trolley.
Sterl bar frame with 3mm thick steel plate top and lower surfaces.
Mounted on heavy Duty 100mm diameter Castors.
Shows typical industrial Workshop usage and wear.

Low Heavy Duty Workshop Mobile Shelf Trolley
Low Heavy Duty Workshop Mobile Shelf Trolley

Low Heavy Duty Workshop Mobile Shelf Trolley.
Steel bar frame with 3mm thick steel plate top and lower surfaces.
Mounted on heavy Duty 100mm diameter Castors.
Shows typical industrial Workshop usage and wear.
140mm diameter hole cut into top surface.

Vintage Wood Workbench
Vintage Wood Workbench

Vintage Wood Workbench.
Thick wood support with 45mm thick wood board lower shelf.
45mm thick wood board top with a covering of 1mm thick sheet steel.
Items seen on Workbench are not included.
Bench shows typical workshop wear and usage. A sturdy unit.

Pneumatic Trolley Jack
Pneumatic Trolley Jack

Air operated trolley jack
Unknown make
Unknown capacity

Conrod Gap Grinder
Conrod Gap Grinder

Model: Robbi Con-Rod Gap Grinder
Three phase 32 amp plug
180mm diameter grinding wheel
On wooden stand
Made in Italy

5x Assorted Grease Applicators
5x Assorted Grease Applicators

5x Assorted Grease Applicators.
Assorted types and sizes.
One unit missing applicator tube end.
Grease type within each unit unknown.
All show moderate wear and usage.

Snap-on Diesel Pulse Adapter MT257
Snap-on Diesel Pulse Adapter MT257

Snap-on Diesel Pulse Adapter.
Model No. MT257.
Older model that shows Workshop wear and usage.
Clip ends to wires need some work or replacement.

Digital Sound Level Meter by Dick Smith
Digital Sound Level Meter by Dick Smith

Digital Sound Level Meter by Dick Smith.
Model No. Q1362.
Measurement range 40dB to 130dB.
Includes box.
Unit shows Workshop wear and usage.

Metal Workshop Light Duty Storage Cabinet
Metal Workshop Light Duty Storage Cabinet

Metal Workshop Light Duty Storage Cabinet.
Black finish
Four inner adjustable shelves.
Lockable, key is missing.
Items seen within Cabinet are not included.
Condition - Appears to be a new unit showing not much wear though the doors have a large gap between them and lower front edging panel appeara separated from sides. Unit may need some repair or reattaching of panels.

Holke Milling Machine
Holke Milling Machine

Model: Holke F-11-V vertical mill
1200mm x 300mm table
3 tee slots
Vertical spindle speeds 48rpm - 4080rpm
NT40 vertical spindle taper
Horizontal spindle speeds 48rpm-1500rpm
NT40 horizontal spindle
Power feeds on all axis (Z disconnected)
Traverse (xyz): 815mm x 400mm x 420mm
Feed rates 12 - 128mm/minute
Sony LH10 digital read out
Horizontal spindle mount but no arbor
One additional head mounting rings
Three phase

To see this machine running:
https://youtu.be/Y_spGNFvA1U

GTR Revolution RPM Tester GTA2
GTR Revolution RPM Tester GTA2

GTR Revolution RPM Tester.
Model No. GTA2
Older unit showing Workshop wear and usage.

Pneumatic Air Grease Gun
Pneumatic Air Grease Gun

Pneumatic Air Grease Gun.
Unknown manufacturer or model.
65mm diameter grease canister.

SPM Shock Pulse Meter 43A w/ Shock Pulse Transducer
SPM Shock Pulse Meter 43A w/ Shock Pulse Transducer

SPM Shock Pulse Meter 43A w/ Shock Pulse Transducer.
Made in Sweden.
Pulse Meter model 43A.
Transducer model 10190.
Includes case
See photos for details on other included components.
Battery condition Unknown.

Steel Framed Ply Top Workbench
Steel Framed Ply Top Workbench

Box steel frame
21mm ply to contents not included

Two Sets of Steel Letter & Number Stamps
Two Sets of Steel Letter & Number Stamps

Two Sets of Steel Letter & Number Stamps.
Includes:
- set of 12mm letter stamps in metal case.
- Set of Number stamps approx 4mm in size in partial case (missing its lid).

Industrial Digital Scales
Industrial Digital Scales

Model MM MI101 digital display
800mm x 800mm treadplate steel platform
Power adapter

Castmaster Stitching Pins
Castmaster Stitching Pins

Two partial boxes
Castmaster Stitching Pins for Cast Iron and Aluminum Crack Repair
In cases

Sykes-Pickavant Circlip Tool Set 028300
Sykes-Pickavant Circlip Tool Set 028300

Sykes-Pickavant Circlip Tool Set.
Set No. 028300
See photos for details on Included components.
Metal case shows rust spotting on exterior.
See the Sykes-Pickavant weblink below for further item details:
https://www.sykespickavantexport.com/Products/Sykes-Pickavant/workshop/general/general-tools/63027/028300

Space Case Storage Container
Space Case Storage Container

Heavy duty storage container

Portable Counterbore Cutting Machine
Portable Counterbore Cutting Machine

Model: Mira BB/M-20
Single phase
In case
Manual
Accessories

Kent-Moore Cam Gear Pilot J-35906
Kent-Moore Cam Gear Pilot J-35906

Kent-Moore Cam Gear Pilot tool.
Part No. J-35906
Made in USA.

Long Steel Workbench with Vice
Long Steel Workbench with Vice

3mm sheet steel top
Angle steel shelf underneath
Record No.6 vice

HTC One M8 Mobile Phone, 16Gb
HTC One M8 Mobile Phone, 16Gb

HTC One M8 Mobile Phone.
16Gb storage.
Phone is unlocked from and service provider.
Andriod version 6.0
Phone has been wiped and reset to factory settings.
Includes micro USB Cable only, all other original accessories are NOT Included.
Condition - Exterior scratches, wear marks, some dents to rear panel. Phone shows use.

Kent-Moore Injector Tube Reconditioning Set
Kent-Moore Injector Tube Reconditioning Set

Model: Kent-Moore J-3380 Injector Tube Reconditioning Set
DDA Series 60
In case

Newen Pre-Combustion Counterboring Tool
Newen Pre-Combustion Counterboring Tool

Newen Pre-Combustion Counterboring Tool PCC100
Includes jig
Micrometer
Spacers

MotoMeter Automotive Compression Tester Kit
MotoMeter Automotive Compression Tester Kit

MotoMeter Automotive Compression Tester Kit.
Type No. 23.02.1002.
Includss Assorted accessories (see photos) and wood case.
Condition - Wood case latches are broken off. Some damage to wood case. Unknown if any original accessories are missing.

Cummins Injector Tube Kit
Cummins Injector Tube Kit

Cummins Injector Tube Replacing and Cutting Kit
Assorted cutters, flaring tools and pilots
In case

Universal Fuel System Priming Kit 50030
Universal Fuel System Priming Kit 50030

Universal Fuel System Priming Kit 50030.
Includes primer tool with atta HDD hoses, 3x brass adapters, plastic case.
Case lock tab is missing.

K-Line Universal Camshaft Bearing Tool Kit
K-Line Universal Camshaft Bearing Tool Kit

Model: K-Line Universal Camshaft Bearing Tool Kit Part No 1820
Unknown completeness
Metal case

Snap-on Computerized Tach Advance Timing Light MT2261A
Snap-on Computerized Tach Advance Timing Light MT2261A

Snap-on Computerized Tach Advance Timing Light.
Model No. MT2261A.
Includes user manual and plastic case.
Condition - Case hinges are broken. Tool shows typical shop usage.

Toolbox of Valve Reseating Cutters
Toolbox of Valve Reseating Cutters

18 assorted valve reseating cutters
Approx 50 assorted pilots
Mostly Warren and Brown
In metal toolbox

Master Thread Repair Kit
Master Thread Repair Kit

Keenserts Master Thread Repair Kit
Partial set

Caterpillar Transmission Shift Analyzer Kit 1U7447
Caterpillar Transmission Shift Analyzer Kit 1U7447

Caterpillar Tools Service Tech Transmission Shift Analyzer Kit.
Kit No. 1U7447.
Includes Tester unit, Assorted Cabling (see photos), instruction sheet, and plastic case.
Condition - Unable to power on as special AC Power Adapter cable is missing. Tester is missing its cover. Unknown if any other original accessories are missing.

Detroit Diesel Injector Tube Kit
Detroit Diesel Injector Tube Kit

Detroit Diesel 149 injector tube kit
In box with instructions
Foam has collapsed

Valve Reseating Cutters
Valve Reseating Cutters

Taylor and Jones
4 x cutters and accessories
In wooden case

Seal-Lock Crack Repair Kit
Seal-Lock Crack Repair Kit

Model: Seal-Lock SLK-100 Starter Kit
Cast iron, cast aluminum block and head repairs
Contains
Air hammer
Taper plugs
Seal locks
Seal lock fluid weld
Jig
Manual

Mitutoyo Dial Indicator No. 3052 w/ Wood Case
Mitutoyo Dial Indicator No. 3052 w/ Wood Case

Mitutoyo Dial Indicator No. 3052 w/ Wood Case.
Dial face approx 78mm diameter.
Dial range 0.01mm to 30mm.
Includes assorted accessories, see photjs, and wooden case.

Colchester Student Lathe
Colchester Student Lathe

Model: Colchester Student 6"
Overall bed length 980mm
Distance between centers approx 550mm
Swing over bed 160mm (320mm diameter)
Swing over gap 240mm (480mm diameter)
38mm spindle bore
8 spindle speeds
54rpm - 1200rpm
Metric and imperial thread cutting
Taper cutter
Quick change tool post
5 tool holders
200mm TOS three jaw chuck
180mm three jaw chuck
250mm four jaw chuck
300mm faceplate
Assorted chuck jaw
100mm recoverable gap
Steady
Live centre
Some tooling
Three phase

To see this machine running:
https://youtu.be/PDnBm-XVBK8

Engine Cylinder Liner Ring Gauge for Large Fiat Diesel Engines
Engine Cylinder Liner Ring Gauge for Large Fiat Diesel Engines

Engine Cylinder Liner Ring Gauge for Large Fiat Diesel Engines.
Not numeric specs marked on ring. Ring measures approx 206mm outside diameter and approx 149mm inner diameter.
Includes wooden case.
Condition - Some rust spotting on steel ring. Wood case shows wear.

Pair of Adjustable Jack Stands
Pair of Adjustable Jack Stands

Pair of Adjustable Jack Stands.
No ID plate visible on either unit so manufacturer, model and weight specs unknown.
Adjustable height from 290mm to approx 465mm.
220mm diameter bases.

Workshop Storage Shelf Shelving Unit
Workshop Storage Shelf Shelving Unit

Workshop Storage Shelf Shelving Unit.
Laminated MDF construction.
Non-adjustable shelves.
Note - Items seen on and within unit are not included.
Condition - Sturdy unit showing surface wear and grime for Workshop usage.

Bering Puller Race Extractor Set by Pickavant
Bering Puller Race Extractor Set by Pickavant

Bering Puller Race Extractor Set by Pickavant.
Set No. LKV-52.
Made in England.
Capacity 28mm to 127mm.
See photos for included components.

Double Sided Steel Workbench
Double Sided Steel Workbench

Back to back workbenches with backboard between
3mm steel tops
Rolled front edge
Angle steel frame
Lights
Shelving
860mm worktop height
Shelf underneath
Contents of threaded rod

Set of Starrett Parallels
Set of Starrett Parallels

Model: Starrett No.S 154 L Parallels
One missing
In case

Silverline Mightyvac Automotive Vacuum Pump Test Kit
Silverline Mightyvac Automotive Vacuum Pump Test Kit

Silverline Mightyvac Automotive Vacuum Pump Test Kit.
Kit model number unknown.
Includes pump, manual, Assorted accessories, and plastic case.
Condition - Case exterior shows moderate wear from workshop storage. Pump unit and accessories show generally mild usage.

Apple iPhone 6s, 32Gb
Apple iPhone 6s, 32Gb

Apple iPhone 6s, 32Gb.
Exterior Model No. A1688 (MN0W2X/A).
Software Version 12.4.1.
32Gb storage.
Battery health -= 87%
Phone is unlocked and not set to any service provider.
Old Apple ID account has been removed.
Phone has been wiped and reset to factory settings.
Includes lightning cable only, all other orinial accessories are not included
Condition - phone has Impact damage to front screen glass with crack running down entire length of the screen. Touch screen functions appear to be operating. Aluminum body shows various scratches and nicks to edges and back panel.

Assorted Milling Cutters
Assorted Milling Cutters

12 x fluted end mills
11mm, 25mm, 25mm, 1 1/8", 22mm, 3/4", 3/4", 25.3mm, 7/8", 30mm, 13.5mm
3 x flat interchangeable blade mills
Diameters: 50.6mm, 33.5mm, 23.4mm
2 x countersinks 32-0, Unknown

Snap-on Engine Cooling System Tester Kit SVTS262
Snap-on Engine Cooling System Tester Kit SVTS262

Snap-on Engine Cooling System Tester Kit.
Kit No. SVTS262.
Includes original accessories and plastic case.
Includes two boxes with five additional adapters.

Set of Milling Machine Cutters
Set of Milling Machine Cutters

2mm to 12mm milling cutters
6mm is broken
In case

Diesel Engine Compression Tester Kit
Diesel Engine Compression Tester Kit

Diesel Engine Compression Tester Kit.
Unable to read label on case so manufacturer unknown.
Pressure Gauge reads to 1000psi (70 bar).
Includes assorted diesel adapters and plastic case. See photos for further details on items included. Kit does not appear to include all original accessories.

Centre Punches
Centre Punches

Assorted punches
Largest 13.4mm
Smallest 3.2mm
25 total

Mill Lockdown Kit
Mill Lockdown Kit

Mill Lockdown Kit
Missing some parts
24.8mm wide T nuts

2x Pressure Gauges w/ Hoses & Case
2x Pressure Gauges w/ Hoses & Case

2x Pressure Gauges w/ Hoses & Case.
Includes 2x Wika branded pressure Gauges in the following specs:
- 0 to 3500psi (250 bar)
- 0 to 1400psi (100 bar)
Includes 6x shorts hose attachments and plastic case 390x290x90mm.
Condition - Items show moderate wear and usage.

Collet Chuck Set
Collet Chuck Set

Grod-Tast ER40 collet chuck set
24 x collets (one broken)
NT40 spindle
In case

Peacock Centricator
Peacock Centricator

Model: Peacock Centricator PCC
In case

Pneumatic Air Disk Sander
Pneumatic Air Disk Sander

Pneumatic Air Disk Sander.
ID label is worn so manufacturer, model and specs unknown.
Uses 155mm diameter sanding pads.
Includes 17x 155mm diameter sanding pads in assorted grits.
Condition - Sander shows moderate wear and usage. Dust Collector bag attachment is missing.

ABW Digital Photo Tachometer
ABW Digital Photo Tachometer

ABW Digital Photo Tachometer.
Part No. 70934.
Includes AC Power Adapter and bottom part of original case.
Condition - Battery compartment is rusted from excessive battery acid leakage. Unit does power on when plugged into the AC adapter cable.

Archer Tapping Chuck
Archer Tapping Chuck

Model: Archer No.20
Tapping chuck
No.2 morse taper

Vertex Milling Machine Rotary Table
Vertex Milling Machine Rotary Table

Model: Vertex 210mm
Fitted with three jaw chuck
Chuck key

Set of 4x Powerbuilt 3-Ton Jack Stands
Set of 4x Powerbuilt 3-Ton Jack Stands

Set of 4x Powerbuilt 3-Ton Jack Stands.
Manufactured 12/2015.
Adjustable height from approx 280mm up to approx 420mm.

2 x V Blocks
2 x V Blocks

Each 125mm long x 70mm wide x 90mm tall

Dual Signal Mechanical 160Nm (120ft/lbs) Torque Wrench by Warren & Brown
Dual Signal Mechanical 160Nm (120ft/lbs) Torque Wrench by Warren & Brown

Dual Signal Mechanical 160Nm (120ft/lbs) Torque Wrench by Warren & Brown.
Model No. 322000.
Range is 20-160Nm or 20-120ft/lbs.
1/2" socket pin is missing, see photos.

Stanko Three Phase Lathe
Stanko Three Phase Lathe

Model: Stanko 16K20
Overall bed length 1700mm
Distance between centers approx 1100mm
Swing over bed 200mm (400mm diameter)
52mm spindle bore
24 spindle speeds
10rpm - 1600rpm
Metric and imperial thread cutting
Elbo VF2/N digital read out
320mm diameter four jaw chuck
250mm diameter three jaw chuck
460mm diameter faceplate
Coolant pump
Manufactured 1976
3953 hours on clock
Tidy solid machine

To see this machine running:
https://youtu.be/7bSizursCFU

Moore & Wright Imperial 6" to 9" Inside Micrometer w/ Mitutoyo Accessories
Moore & Wright Imperial 6" to 9" Inside Micrometer w/ Mitutoyo Accessories

Moore & Wright Imperial 6" to 9" Inside Micrometer w/ Mitutoyo Accessories.
Micrometer made in England by Moore & Wright.
6 to 9 inch size.
Includes 3x Mitutoyo accessory units, see photos.
Includes original case.

TBP 500 Battery Tester for 12V Automotive Batteries
TBP 500 Battery Tester for 12V Automotive Batteries

TBP 500 Battery Tester for 12V Automotive Batteries.
160Ah max.
Sterl casing measures approx 270x230x110mm.

SKF Electronic Stethoscope 729160 Kit
SKF Electronic Stethoscope 729160 Kit

SKF Electronic Stethoscope kit.
Model No. 729160.
Made in Sweden.
Includes Stethoscope, 2x probes, headphones, case, instruction manual.
Condition - Case exterior shows moderate wear from industrial engineering Workshop storage. Items inside show generally mild usage.

Steel Workbench with Vice
Steel Workbench with Vice

Sheet steel top 3mm thick
Rounded front edge
840mm worktop height
760mm back board
Set of wooden drawers
Angle steel frame
Cupboard and drawers in front
125mm metal vice

Pneumatic Air Nibbler Tool
Pneumatic Air Nibbler Tool

Pneumatic Air Nibbler Tool.
ID plate missing so brand, model and specs unknown.

Ingersoll Rand Pneumatic Air Hammer
Ingersoll Rand Pneumatic Air Hammer

Ingersoll Rand Pneumatic Air Hammer.
ID plate missing so model number and specs unknown.
Includes attached chisel bit.

Large Lot of Hex Keys
Large Lot of Hex Keys

Approx 70 total
Two stands
L and T shaped allen keys

Powerdyne Pneumatic Air Hammer
Powerdyne Pneumatic Air Hammer

Powerdyne Pneumatic Air Hammer.
Model number and specs unknown.

Seiko Precision TP-20 Staff Time & Date Stamp Clock
Seiko Precision TP-20 Staff Time & Date Stamp Clock

Seiko Precision TP-20 Staff Time & Date Stamp Clock.
Model TP-20
Unit is operating.
Some exterior oily finger marks from engineering staff time clock usage.

Round Office Table
Round Office Table

Round Office Table.
Faux Wood Laminated MDF top.
Steel support column and base.
Some surface scratches, wear etc.

Assorted Tap and Die Handles
Assorted Tap and Die Handles

10 total
3 tap handles
7 die handles
Largest 65mm diameter
Smallest 20.6mm diameter

Large Lot of Drill Bits
Large Lot of Drill Bits

Large lot of twist drills
Approx 90 drills total
Some long series
Box and drill holder

Assorted Lathe Tooling
Assorted Lathe Tooling

2 x 25mm shank turning tools
25.6mm x 23mm shank tool holder
2 x 14mm x 13mm shank tool holders
25mm and 20mm boring bar holder
Centre drills
No 4 morse taper dead centre
Assorted tool steel

Torque Wrench Testing Machine by Britool
Torque Wrench Testing Machine by Britool

Torque Wrench Testing Machine by Britool.
Made in England.
Serial No. 8M/153.
Capacities:
- 0-5000 lb/ins.
- 0-400 lbs/ft
- 0-55 kg/m
Some rust spotting on unit.

2 x Lathe Boring Bars
2 x Lathe Boring Bars

250mm long x 18mm
S20D-STFCR 11 (no tip)
225mm long x 12.8mm diameter
131-2516-A 25mm tool holder

2 x Lathe Turning Tools
2 x Lathe Turning Tools

150mm long
25mm square shanks
Left and right handed
Seco CTFPL 2525-16
Seco CTGPR 2525-16

2x Mobile Office File Cabinets
2x Mobile Office File Cabinets

2x Mobile Office File Cabinets.
MDF with grey laminate construction
Both units Lockable, keys are missing.
Each unit is approx 505x425x650mm.
Both are mounted on Castors.
Contents are not included.
Some dust, sticker residue on exterior surfaces.

Large Lathe Boring Bar
Large Lathe Boring Bar

350mm long x 29mm x 26mm
S32U-CTFPR16

Sandvik Boring Bar
Sandvik Boring Bar

27mm x 29mm shank
250mm long

Mobile Office Dual-Sided Whiteboard / Pinboard
Mobile Office Dual-Sided Whiteboard / Pinboard

Mobile Office Dual-Sided Whiteboard / Pinboard.
Rotable double Sided.
Whiteboard areas are both 1170x780mm.
Pinboard areas are each 1170x955mm.
Condition - Wheels need servicing as most don't roll. Unit would benefit from a clean.

Adjustable Lathe Tool
Adjustable Lathe Tool

Impero PO1 2553
Welded to 20mm thick mounting plate
Adjustable angles via hex heads

Lathe Mounted Grinder in Case
Lathe Mounted Grinder in Case

Three phase lathe mounted grinder
0.55kw motor
Belt drive
Range of grinding wheels and adapters
15 amp three phase plug

Large Office Storage Wall Cabinet Cupboard Bench w/ Shelving
Large Office Storage Wall Cabinet Cupboard Bench w/ Shelving

Large Storage Wall Cabinet
MDF construction.
Lower cabinet has top surface 930mm above floor, is 600mm deep, ten doors six compartments each with adjustable shelf.
One door has a lock, key is missing.
Upper Shelving Unit 1200mn in height and 320mm deep.
Items on unit are NOT Included.
Buyer should bring extra hands to assist with removal as unit is very long and heavy at 4500mm in length and access door to offices is narrow. Tools with square head drivers should be brought for buyer to potentially disassemble for removal.

Three Jaw Lathe Chuck
Three Jaw Lathe Chuck

250mm diameter
Three jaw chuck
With key

Large Drawer Unit of Taps and Dies
Large Drawer Unit of Taps and Dies

78 drawer unit
Sliding blocks of drawers that can be reconfigured
Huge selection of taps and dies
183 taps
86 dies

Wall Mounted Office Bookshelf Unit
Wall Mounted Office Bookshelf Unit

Wall Mounted Office Bookshelf Unit.
Faux Wood laminate MDF.
Four adjustable shelf pieces.
Will need square head driver to remove from wall.
Items seen on shelf are not included.

650mm Diameter Fitness Yoga Ball
650mm Diameter Fitness Yoga Ball

650mm Diameter Fitness Yoga Ball.
Unknown brand.
Blue colour.
650mm Diameter
Item will be deflated for shipping.

Office Workstation Desk
Office Workstation Desk

Office Workstation Desk.
Faux Wood Laminated MDF top with grey laminated support.
Items seen on and around desk are NOT included.
Some general office use marks etc.

Drawer Unit of Tooltips
Drawer Unit of Tooltips

Plastic 10 drawer unit
Contents of lathe tool tips and accessories

Large Office L-Shaped Desk Workstation w/ Chair & Drawer Unit
Large Office L-Shaped Desk Workstation w/ Chair & Drawer Unit

Large Office L-Shaped Desk w/ Chair Unit.
- large 2110x2110mm corner desk with height adjustable keyboard platform
- metal Mobile Drawer unit 560x395x575mm. Unit is Lockable, no key.
- gas lift desk chair padded blue fabric.
Some wear to seat fabric. Drawer white finish shows some wear. General office wear.
Note - Auction includes above items only, all other items seen on and around desk in photos are NOT Included.
Buyer may need to bring extra hands and disassemble Desk on pickup as Desk is too large to move out available doors.

Draw Unit and Contents of Taps and Accessories
Draw Unit and Contents of Taps and Accessories

Thread gauges
Easy outs
Wide selection of taps and some dies
Approx 25 taps total

3-Drawer Office File Cabinet by Europlan
3-Drawer Office File Cabinet by Europlan

3-Drawer Office File Cabinet by Europlan.
Lockable, keys are missing.
Some scratches, wear, sticker residue on exterior surfaces.

6 x Large Taps
6 x Large Taps

2 x Unknown sizes
M27x2.0
M28x1.5
M30x1.5
NC GH7?

Plan or Artwork Drawer / Desk Unit
Plan or Artwork Drawer / Desk Unit

Plan or Artwork Drawer / Desk Unit.
Left side is a desk with 900mm high work surface.
Rught side is 4 large drawers for large prints, plans, or artwork etc. Each drawer is approx 875x600x100mm.
Items seen on unit and within drawers are not included.
Condition - Some drawers are missing handles. Some edging is coning loose. Some tape residue on work surface.

Small Milling Machine Vice
Small Milling Machine Vice

100mm jaws
130mm max gap

Large Wall Mounted Metal Brochure Advertisement Display Rack
Large Wall Mounted Metal Brochure Advertisement Display Rack

Large Wall Mounted Metal Brochure Advertisement Display Rack.
Metal slats each 1000mm wide with 10mm gap for storing various brochures, pamphlets, adds, etc.
Mounted on a black finished MDF board.
Brochures seen in unit are not included.

Office Workstation Desk w/ Chair & Mobile Drawer Unit
Office Workstation Desk w/ Chair & Mobile Drawer Unit

Office Workstation Desk w/ Chair & Mobile Drawer Unit.
Includes:
- 1800mm wide office desk with Faux Wood Laminated top and grey laminate support.
- matching grey laminated mobile drawer unit 505x460x655mm.
Gas-lift desk chair with padded black vinyl surfaces.
Auction includes above items only, all other items seen on and around desk are NOT included.
Condition - Some wear to vinyl on chair. Dusty surfaces.

3 x Drill Chucks
3 x Drill Chucks

Jacobs Chuck 34B 1/2" No.3 Morse taper
Unbranded chuck no taper
Unbranded chuck No.3 morse taper
All with chuck keys

2-Drawer Office File Cabinet by Europlan
2-Drawer Office File Cabinet by Europlan

2-Drawer Office File Cabinet by Europlan.
Lockable, keys are missing.
Some finish scratches and wear.

Large Wall Mounted Office Bookshelf
Large Wall Mounted Office Bookshelf

Large Wall Mounted Office Bookshelf.
Laminated MDF construction.
Five adjustable shelf pieces.
Note - Buyer should bring extra hands and basic tools for removing unit from wall.
Items seen on shelves are NOT Included.

13mm Morse Taper Drill Chuck
13mm Morse Taper Drill Chuck

ROHM 1mm-13mm drill chuck
Model: J33S3
No.3 morse taper
No.4-No.3 morse taper adapter
Chuck key

7 Assorted Morse Taper Drill Bits
7 Assorted Morse Taper Drill Bits

38mm in No.5 - No.4 morse taper adapter
1 15/16", 1 5/32", 47/64", 5/8", 41/64", 11/16"

Large Office Storage Wall Cabinet Cupboard Bench
Large Office Storage Wall Cabinet Cupboard Bench

Large Office Storage Wall Cabinet Cupboard Bench.
Laminated MDF construction.
8x doors covering four inner compartments each with a single adjustable shelf.
Items seen on and within unit are NOT Included.
Note - Buyer should bring extra hands to assist with removal as unit is very long and heavy and access door to offices is narrow.

10 x Morse Taper Drill Bits
10 x Morse Taper Drill Bits

31/32", 1", 7/8", 3/4", 49/64", 17.5mm, 16.75mm, 3/4", 17.5mm, 5/8"

Office Storage Shelf Bookshelf Unit
Office Storage Shelf Bookshelf Unit

Office Storage Shelf Bookshelf Unit.
Faux Wood Laminated MDF construction.
Non-adjustable Shelving.
Items seen within unit are NOT Included.

Assorted Lathe Accessories
Assorted Lathe Accessories

250mm long x 70mm diameter No.5 MT live centre (jammed)
Morse taper adapters
5-4, 5-4, 4-2, 38mm-4, 4-6?
25mm dead centre

Large Office L-Shaped Desk Workstation w/ Chair & 3x Drawer Units
Large Office L-Shaped Desk Workstation w/ Chair & 3x Drawer Units

Large Office L-Shaped Desk w/ Chair & 3x Drawer Units.
- large 2410x2110mm corner desk with height adjustable platform
- 3x Mobile Drawer units each 495x425x655mm. One unit is Lockable, key is missing.
- gas lift desk chair with black vinyl.
Condition - Some wear to seat vinyl. Otherwise just general office wear and usage marks.
Note - Auction includes above items only, all other items seen on and around desk in are NOT Included.
Buyer may need to disassemble desk on pickup as it is too large to move out available doors.

Large Lathe Live Centre
Large Lathe Live Centre

No.5 morse taper
70mm diameter

Large Lathe Live Centre
Large Lathe Live Centre

Skoda live centre
Model: 5-CSN243324
No.5 morse taper

Large Office L-Shaped Desk Workstation w/ Chair & 3x Drawer Units
Large Office L-Shaped Desk Workstation w/ Chair & 3x Drawer Units

Large Office L-Shaped Desk w/ Chair & 3x Drawer Units.
- large 2400x2400mm corner desk
- 1x Mobile Drawer unit 460x460x600mm.
- 2x non-mobile drawer units each 460x460x570mm.
- gas lift desk chair with padded black vinyl.
Condition - Some wear to seat vinyl. Broken plastic on one drawer handle.
Note - Auction includes above items only, all other items seen on and around desk in photos are NOT Included.
Buyer may need to dissasrnble Desk on pickup as Desk may be too large to move out available doors.

Lathe Live Centre
Lathe Live Centre

Large live centre
No 4 morse taper
On No.4 - No.5 Morse taper adapter

Dyco Drill Press
Dyco Drill Press

Dyco drill press
Single phase
Bench mount but has been placed on pedestal
13mm chuck
Belt drive
260mm x 270mm bed