Torks - Onsite Auction
4x Pairs of Trolley Castors
Skylarc Ref H125006
Expected Auction End Time: 9th May 2021 8:43pm
4x Pairs of Trolley Castors.
Includes:
- 2x swivel type Castors with 125mm diameter wheels.
- 2x non-swivel Castors with 125mm diameter wheels.
2x non-swivel Castors with 125mm diameter wheels (white/red colour).
- 2x swivel type Castors with 100mm diameter wheels.
All units show previous usage.
2x Used Electric Induction Motors
Skylarc Ref G125005
Expected Auction End Time: 9th May 2021 9:15pm
2x Used Electric Induction Motors.
Includes:
- Kings Bird 1hp, 50Hz, 240V, 5A, single phase, 1500/1720rpm, 4-pole, Manufactured 1978.
- AEI Kapak Motor 1.5hp, 3-phase, 400V, 21A, 850rpm.
Both motors untested. Both units show moderate usage.
3x Small Industrial Gear Boxes & Torque Limiters
Skylarc Ref E125003
Expected Auction End Time: 9th May 2021 9:38pm
3x Small Industrial Gear Boxes & Torque Limiters
Includes:
- STM Spa Type U63, Manufactured in 2012, ratio 1/100, approx 170x105x190mm.
- STM Spa Type AMF2 32/1 M1, Manufactured in 2006, ratio 1/3, approx 140x135x125mm
- Andrews & Beaven NZ Ltd, size J112, ratio 15/1, approx 135x120x120mm.
Condition varies with each unit. All units do turn.
First-X Single Phase Wirecut Machine
Skylarc Ref T124888
Expected Auction End Time: 9th May 2021 9:32pm
First-X brand wire cut machine
Reciprocating edm wire cut
Uses Molybdenum wire and water soluble soap
Computer controlled
Digital read out
Approx travels
X axis 480mm
Y axis 280mm
190mm approx head to workpiece
Can cut tapers
Setting block
Box of soap
Small amount of wire
Very rare single phase machine
To see this machine running:
https://youtu.be/hRBXC9FlJMk
Vintage Wooden Workshop Storage Cabinet
Skylarc Ref V124864
Expected Auction End Time: 9th May 2021 9:00pm
Vintage Wooden Workshop Storage Cabinet.
Solid wood board and wood veneer construction.
Wood type unknown, see photos for wood grain details.
Brass door handles and other hardware.
Age of unit is unknown.
Items seen inside on on top of unit are not included.
Condition - Unit shows typical wear and usage, some wood chipping, scratches, wear etc. Would make a great restoration project.
Assorted Mixed Socket Sets, Components, Spanners & More
Skylarc Ref D125002
Expected Auction End Time: 9th May 2021 9:58pm
Assorted Mixed Socket Sets, Components, Spanners & More.
Includes small incomplete vintage 1/4" and 3/8" combination sockets set with blue metal case.
Red steel tool box (missing its lid) with assorted loose 1/2" Sockets, Breaker Bar, extensions etc. Some units branded Sidchrome, Powerbuilt and Sek.
Includes 3x Loose hand Spanners, one each by Stahlwille, Heyco and Gordon Tools.
See photos for further details on what is included.
Condition varies with each item.
Steelcase 3-Compartment Personnel Locker Unit
Skylarc Ref W124865
Expected Auction End Time: 9th May 2021 8:27pm
Steelcase 3-Compartment Personnel Locker Unit.
Made in USA by Steelcase.
Doors can be locked with a compatible padlock (padlocks not included).
Condition - Unit shows typical workshop wear and usage. Some denting to panels. One inner floor needs repair. Dirty surfaces.
2x Small Workshop Trolleys
Skylarc Ref X124866
Expected Auction End Time: 9th May 2021 9:47pm
2x Small Workshop Trolleys.
Grey unit is approx 580x450x620mm and has wooden storage box in lower shelf.
Red unit is approx 590x460x525mm. Partial wood board top. Buyer can easily add their own shelf boards to unit.
Both units on Castors.
Workshop Hydraulic Lifting Platform Trolley, Faulty Lifter
Skylarc Ref Y124867
Expected Auction End Time: 9th May 2021 7:45pm
Workshop Hydraulic Lifting Platform Trolley, Faulty Lifter.
Made in NZ in 1979 by Donaldson Engineering.
Model No. SL50
500kg capacity.
Lifting platform is approx 650x460mm.
Condition - Hydraulics are faulty as platform will not rise when pedal is depressed. Unit shows typical industrial wear and usage.
Workshop Workbench / Storage Cupboard Unit
Skylarc Ref A124869
Expected Auction End Time: 9th May 2021 7:29pm
Workshop Workbench / Storage Cupboard Unit.
Main work surface approx 900mm above floor.
Upper shelf unit approx 320mm above main work surface and is approx 200mm wide.
Top mounted 520x190mm shelf with 10x holes for holding Tool Holders or other items.
4x lower doors covering inner storage space.
Note - Items seen on unit are not included. See our other listings for those items.
Workbench shows typical workshop wear and usage.
Assorted Jobber Drill Bits & Thread Tappers
Skylarc Ref R124860
Expected Auction End Time: 9th May 2021 6:52pm
Assorted Jobber Drill Bits & Thread Tappers.
5x Evacut Jobber Drill Bits in sizes 2.5mm, 4.2mm, 5.1mm, 6.8mm, 8.5mm.
1x Dormer Jobber Drill in 6.5mm size.
6x Vergnamo pass through hole taps type A15-S in sizes M3, M4, M5 (2x), M10, M12.
1x thread tap T407 MF 10x1.25 6H.
12x Assorted loose tread taps showing various levels of usage.
Condition - Varies with each unit. Some are as new unused while others show a varying level of usage.
Assorted Mixed Lot of Lockdown Kit Bolts, Components, & other similar hardware
Skylarc Ref B125000
Expected Auction End Time: 9th May 2021 6:47pm
Assorted Mixed Lot of Lockdown Kit Bolts, Components, & other similar hardware.
Assorted mixed lot of various loose bolts, nuts and other hardware from old Lockdown kits. Includes some loose Jobber Drill Bits, wood bolts, other items, see photos for further details.
Includes plastic container measuring approx 350x300x130mm
Assorted Industrial Springs, Bulk Lot
Skylarc Ref P124858
Expected Auction End Time: 9th May 2021 9:16pm
Assorted Industrial Springs, Bulk Lot.
Assorted sizes. Diameters approx 8mm to approx 50mm..
Total count unknown, estimate around 150+ individual units included.
Condition - Unknown if any are used.
Assorted Magnetic Bases, Stands, Attachments for Dial Gauges
Skylarc Ref G125499
Expected Auction End Time: 9th May 2021 6:30pm
Assorted Magnetic Bases, Stands, Attachments for Dial Gauges.
Vintage Eclipse magnetic Base unit.
One unbranded Weighted Base unit.
2x adjustable gauge support bars for magnetic bases.
2x other types of gauge support brackets, see photos.
Cindition varies with each unit. Some are as new but incomplete while others are vintage old units.
17x Assorted Lathe Boring Bars & Other Milling Bits
Skylarc Ref F125498
Expected Auction End Time: 9th May 2021 9:56pm
17x Assorted Lathe Boring Bars & Other Milling Bits.
Diameters range from approx 11mm to 25mm.
See photos for further details on types of Lathe and Milling cutting components and units included.
Condition varies greatly with each unit.
Office Corner L-Shaped Workstation Desk
Skylarc Ref Z125492
Expected Auction End Time: 9th May 2021 6:55pm
Office Corner L-Shaped Workstation Desk
Faux Wood and grey surface laminate
Auction includes the two above mentioned units only, all other items seen on and around desk are NOT included.
Condition - Some edging marks on desk, generally mild usage wear.
Office Workstation Desk w/ Side Unit, Mobile Drawer
Skylarc Ref W125489
Expected Auction End Time: 9th May 2021 7:57pm
Office Workstation Desk w/ Side Unit, Mobile Drawer
Faux Wood and grey surface laminate.
Main unit with upper reception-like shelf is approx 1800mm long, 760mm wide, 710mm work surface height. Upper unit rises 395mm above work surface.
Stand-alone side unit approx 1505x490x660mm.
Mobile Drawer unit approx 470x460x580mm.
Auction includes the above mentioned items only, all other items seen on and around desk are NOT included.
Desk and side unit show some surface wear and use.
2x Padded Office Reception Chairs
Skylarc Ref V125488
Expected Auction End Time: 9th May 2021 9:40pm
2x Padded Office Reception Chairs.
Wood support legs and arm rests.
Padded seat and ba ks in light grey cloth.
Seat width between arm rests approx 435mm.
Seat height approx 440mm.
Condition - Some fabric staining. One chair has a loose back. Scratches and nicks to wood.
Office Corner L-Shaped Desk Workstation w/ Mobile Drawer
Skylarc Ref U125487
Expected Auction End Time: 9th May 2021 7:44pm
Office Corner L-Shaped Desk Workstation w/ Mobile Drawer
Faux Wood top laminate with grey laminate sides.
Corner monitor stand included.
Includes mobile drawer unit 465x475x580mm.
Other items seen on and near desk are NOT included.
Note - Location of desk is in an upstairs office accessed by a narrow stairway with a sharp corner. Buyer should come with extra hands and tools to assist in removable and/or possible disassembly of unit to remove it from building
Office Corner L-Shaped Workstation Desk w/ Drawer Unit
Skylarc Ref T125486
Expected Auction End Time: 9th May 2021 9:18pm
Office Corner L-Shaped Workstation Desk w/ Drawer Unit.
Faux Wood Laminated MDF top with black Laminated MDF sides.
Desk surface approx 705mm above floor.
Includes matching desktop mounted Shelving Unit rising 900mm above desk surface.
Includes matching 3-drawer storage unit approx 705x485x695mm.
Other items seen on desk and Shelving are not included.
Note - Location of desk is an upstairs office accessed by a narrow stairway with a sharp corner. Buyer should come with extra hands/ tools to assist in removable and/or possible disassembly of unit to remove it from building.
Mobile Office Computer Workstation Desk
Skylarc Ref S125485
Expected Auction End Time: 9th May 2021 9:22pm
Mobile Office Computer Workstation Desk
Faux Wood Laminated MDF construction.
Desk surface is approx 725mm above floor.
Lower keyboard tray.
Cubby for mounting Desktop Computer tower.
Adjustable Monitor shelf.
Mounted on Castors.
Other items seen on and around desk are NOT included.
Buyer should bring extra hands in removing unit from 1st floor location.
Office Corner L-Shaped Desk Workstation w/ Shelf Unit
Skylarc Ref Q125483
Expected Auction End Time: 9th May 2021 8:12pm
Office Corner L-Shaped Desk Workstation w/ Shelf Unit
Faux Wood Laminated MDF construction.
Desk surface approx 705mm above floor.
Shelf Unit rises approx 1000mm above desk surface and is approx 1650mm long, 355mm wide.
Note - Location of desk is in an upstairs office accessed by a narrow stairway with a sharp corner. Buyer should come with extra hands and tools to assist in removable and/or possible disassembly of unit to remove it from building
4-Door Office Storage Cupboard
Skylarc Ref N125480
Expected Auction End Time: 9th May 2021 9:55pm
4-Door Office Storage Cupboard.
Light grey laminate surfaces.
Four doors with two inner compartments.
One adjustable shelf in each compartment
Doors lockable, keys are missing.
Some surface wear and use marks.
Small Corner L-Shaped Office Desk Workstation
Skylarc Ref M125479
Expected Auction End Time: 9th May 2021 7:01pm
Small Corner L-Shaped Office Desk Workstation.
Light grey laminated top with dark grey laminate sides.
Adjustable keyboard section.
Note - Location of desk is in an upstairs office accessed by a narrow stairway with a sharp corner. Buyer should come with extra hands and tools to assist in removable and/or possible disassembly of unit to remove it from building.
Vintage Maco Adjustable Template Tool w/ Box + 2nd Tool
Skylarc Ref L125478
Expected Auction End Time: 9th May 2021 6:05pm
Vintage Maco Adjustable Template Tool.
Made in England.
Model number unknown.
Brass and steel construction.
Includes original box. Box shows damage and wear from age.
Includes a second smaller template tool made in Japan, its manufacturer is unknown.
2x Indexable Mill Cutters
Skylarc Ref J125476
Expected Auction End Time: 9th May 2021 9:26pm
2x Indexable Mill Cutters.
One unit is Kennametal type 25A03R032A25ED10, I9LH03.
Second unit has no visible ID markings, approx 20mm cutting diameter.
Both units show wear and usage. Shank of Kennametal unit has been modified, see photos.
8x Assorted Individual Steel Parallel Units
Skylarc Ref H125474
Expected Auction End Time: 9th May 2021 8:16pm
8x Assorted Individual Steel Parallel Units.
There are no matching parallel sets in this auction, each unit is a single piece missing its twin.
Approx sizes include:
- 140x45x45mm.
- 164x54x18.2mm.
- 150x59x20mm.
- 127x31.7x31.5mm.
- 265x18x18mm.
- 119x38.2x25.3mm.
- 161x22.8x14.2mm.
- 112.5x20.5x14.2mm.
Condition varies with each unit.
Charme Spark Eroder Machine
Skylarc Ref N124830
Expected Auction End Time: 9th May 2021 8:28pm
Model: Charme EDM CM-110DT Spark Eroder
Charme Pulse CD-30M control panel
Heidenhain VRZ 710 digital read out
500mm x 250mm T slot table
Nose to table max 430mm
Three phase
Dielectric fluid bath dimensions 700mm x 410mm x 325mm
Manufactured 1986
Approx half a barrel dielectric fluid
Manuals
Some accessories
Machine last run about a year ago was put in to storage in running condition.
Assorted Mill Cutters, Bits, w/ Wood Holders & More
Skylarc Ref F124848
Expected Auction End Time: 9th May 2021 9:45pm
Assorted Mill Cutters, Bits, w/ Wood Holders & More.
29x assorted type of Milling Cutters in assorted sizes, see photos for details on type of Cutters included.
Includes 3x Torx drivers.
Includes two wood block drill bit/cutter holders.
Condition varies greatly with each unit. Some appear unused while others show varying levels of usage. Wood blocks show grime and wear from workshop use.
Haas Super VF 2SS Vertical Machining Centre
Skylarc Ref G125473
Expected Auction End Time: 9th May 2021 7:13pm
Model: Haas Super VF-2SS
Manufactured 2007
Three phase
Haas controller
Software version M15.05A
Table dimensions 910mm x 355mm
Table travels
X 761mm
Y 412mm
Z 502mm
Spindle to table max: 610mm min: 102mm
22kw main spindle motor
Max weight on table 680kg
24 tool carousel
High speed tool changer
BT40 spindle taper
12000rpm max spindle speed
Wired for fourth axis
Renishaw OMP 40-2 radio probe
Renishaw OTS radio tool setter
Chip conveyor
Micro-Drop MD-1200 MQL system
Manuals
Serial number 1062334
Machine displays an error on startup which means the machine requires repowering to run
Approx 4000kg
To see this machine running:
https://youtu.be/OF1J3LdIrtY
Moore & Wright 1" Precision Depth Guage w/ Attachments & Wood Case
Skylarc Ref B124844
Expected Auction End Time: 9th May 2021 6:49pm
Moore & Wright 1" Precision Depth Guage w/ Attachments & Wood Case.
Model No. 53
Made in England
Age of unit unknown. Wood case shows Workshop wear and grime, one latch is missing on case.
Haas Super VF 2SS Vertical Machining Centre
Skylarc Ref L124828
Expected Auction End Time: 9th May 2021 9:45pm
Model: Haas Super VF-2SS
Manufactured 2007
Three phase
Haas controller
Software version M15.05A
Table dimensions 910mm x 355mm
Table travels
X 761mm
Y 412mm
Z 502mm
Spindle to table max: 610mm min: 102mm
22kw main spindle motor
Max weight on table 680kg
24 tool carousel
High speed tool changer
BT40 spindle taper
12000rpm max spindle speed
Wired for fourth axis
Renishaw OMP 40-2 radio probe
Chip conveyor
Manuals
Serial number 1057845
Exceptionally tidy machine ready to go
Approx 4000kg
To see this machine running:
https://youtu.be/S8l1FczWVgA
2x HSS Annular Milling Cutters, 33mm & 35mm Dia
Skylarc Ref U124837
Expected Auction End Time: 9th May 2021 7:29pm
2x HSS Annular Milling Cutters, 33mm & 35mm Dia.
Includes:
- Bordo HSS Annular Cutter, 33mm dia, 25mm cut depth, 3/4" shank size.
- Hougen DOC Rotalock Plus Cutter, 35mm Dia, 25mm cut depth.
Both units show varying levels of usage, see photos for details.
Targa Single Phase Surface Grinder
Skylarc Ref Y115898
Expected Auction End Time: 9th May 2021 8:47pm
Model: Targa 612 Surface Grinder
300mm x 150mm magnetic chuck
3/4hp electric motor
180mm wheel diameter
Max height wheel to chuck 170mm
Manufactured 1983
Bench mount machine
On heavy duty steel stand
Awesome home workshop machine rarely available in single phase
Dyco Single Phase Bandsaw
Skylarc Ref F125420
Expected Auction End Time: 9th May 2021 6:35pm
Dyco bandsaw
Single phase
Table dimensions 405mm x 405mm
Cast iron tilting table
Max throat height 160mm
Large capacity, 470mm blade to body
Built in ideal blade welder
Spare blade
Awesome little home workshop machine
Kondia CNC Powermill (Faulty)
Skylarc Ref B125416
Expected Auction End Time: 9th May 2021 8:37pm
Model: Kondia K-600 Powermill
Table dimensions 1200mm x 360mm
Spindle speeds 100-4000rpm
5.5kw main spindle motor
Table travel
X axis 600mm
Y axis 350mm
Z axis 140mm
Heidenhain CNC controller
NT40 spindle taper
Three phase
Has a faulty controller board
Part number Yaskawa CACR-SR10BE12F-E
Induma Three Phase Turret Milling Machine
Skylarc Ref Z125414
Expected Auction End Time: 9th May 2021 8:30pm
Model: Induma 1S/43
Table work area 1680mm x 230mm
3 x 16mm T slots
Table travel
X axis 700mm
Y axis 230mm
Z axis 400mm
Spindle to table max 410mm
8 Spindle speeds
65rpm - 2200rpm
Spindle motor 2hp
12 table feeds
Power feeds all axis
Heidenhain VRZ 731B Digital read out
Manual
To see this machine running:
https://youtu.be/Rr31HNShKx8
Venture Three Phase Gear Head Drill
Skylarc Ref Y125413
Expected Auction End Time: 9th May 2021 9:18pm
Model: Martin Manufacturing Venture
Three phase 2hp motor
9 speeds
Forward and reverse
75rpm - 2450rpm
550mm x 440mm cast table
Heavy duty T slot base
140mm spindle travel
No.4 morse taper spindle
Fitted with Vertex 6XHSP-J6 keyless chuck
Beautiful kiwi made machine
To see this machine running:
https://youtu.be/JOvxGtsWKCI
Gornati Leopard Three Phase Lathe
Skylarc Ref X125412
Expected Auction End Time: 9th May 2021 9:19pm
Model: Gornati and Co Leopard 180
Bed length 1400mm
Distance between centers approx 950mm
Swing over bed approx 380mm
Swing over gap approx 480mm
Swing over cross slide approx 240mm
Three phase 4hp main motor
12 spindle speeds
53rpm - 2000rpm
Metric and imperial thread cutting
Quick change tool post with 4 tool holders
200mm three jaw chuck (2 jaw sets)
310mm four jaw chuck
56mm spindle bore
No.3 MT tailstock
Coolant pump
Tidy Italian machine ready for work
To see this machine running:
https://youtu.be/Z0pO_7hNKfk