Bloore and Pillar New Plymouth Surplus Machinery Auction
Shelf of Assorted Stainless Steel Pipe Fittings, Valves, & More
Skylarc Ref Q126601
Expected Auction End Time: 10th October 2021 8:16pm
Shelf of Assorted Stainless Steel Pipe Fittings, Valves, & More
Approx 70x individual stainless steel fittings, many 316 type.
Inudes all items on the one shelf seen in photos. Shelf not included.
Condition - Most items appear as new unused but covered with thick dust from workshop storage.
Shelf of Assorted Stainless Steel Pipe Fittings, Valves, & More
Skylarc Ref P126600
Expected Auction End Time: 10th October 2021 9:04pm
Shelf of Assorted Stainless Steel Pipe Fittings, Valves, & More
Approx 70x individual stainless steel fittings, many 316 type and some marked as made in Sweden.
Inudes all items on the one shelf seen in photos. Shelf not included.
Condition - Most items appear as new unused but covered with thick dust from workshop storage.
Shelf of Assorted Stainless Steel Pipe Fittings
Skylarc Ref O126599
Expected Auction End Time: 10th October 2021 6:38pm
Shelf of Assorted Stainless Steel Pipe Fittings.
Approx 40x individual stainless steel fittings, many 316 type and made in Sweden.
Largest diameter is 170mm.
Inudes all items on the one shelf seen in photos. Shelf not included.
Condition - Most items appear as new unused but covered with thick dust from workshop storage.
3x Pallets of Assorted Brass & Steel Fittings, Parts, Components
Skylarc Ref N126598
Expected Auction End Time: 10th October 2021 8:42pm
3x Pallets of Assorted Brass & Steel Fittings, Parts, Components.
Pallets Includes numerous large and small brass fittings, Valves, and other brass items.
Also includes assorted steel fittings and various components.
See photos for further details on what is included on the three pallets.
Condition varies with each item. Many appear unused leftover workshop stock, dusty from storage. Some steel items show surface rusting from storage.
Heavy Steel Engineering Workshop Table Top
Skylarc Ref M126597
Expected Auction End Time: 10th October 2021 9:02pm
Heavy Steel Engineering Workshop Table Top.
40mm thick steel plate with threaded and non threaded holes.
Threaded holes approx 15mm diameter.
Table top only, no support frame included.
Some surface rusting from storage.
Vintage Curvomat Type UZ Milling Apparatus
Skylarc Ref K126595
Expected Auction End Time: 10th October 2021 6:09pm
Vintage Curvomat Milling Apparatus.
Type No. UZ.
Made in West Germany.
Age of unit unknown.
Top circular disk approx 280mm diameter.
Base plate mounting slots spaced approx 350x180mm apart on centre.
See photos for further details on this unit.
Unit is dirty from long term storage.
2-Jaw 210mm Lathe Chuck
Skylarc Ref H126592
Expected Auction End Time: 10th October 2021 7:59pm
2-Jaw 210mm Lathe Chuck.
Unknown manufacturer.
Chuck jaws appear to be hydraulically controlled as there is no Chuck key points.
Unit Mounting slots are spaced approx 350mm apart on centre.
See photos for further design details.
Unknown if unit is functional.
Hydraulically Actuated Rotating Tooling Stand
Skylarc Ref J126594
Expected Auction End Time: 10th October 2021 7:25pm
Hydraulically Actuated Rotating Tooling Stand.
Unknown manufacturer.
Unsure as to purpose of unit, see photos for details.
Main base plate approx 405x330mm.
Circular top approx 175mm diameter.
Condition - Unit shows moderate wear and usage. Dirty from long term storage. Some surface rusting.
300mm Hydraulic Ram
Skylarc Ref I126593
Expected Auction End Time: 10th October 2021 8:32pm
300mm Hydraulic Ram.
Unknown manufacturer.
Cylinder approx 325mm long.
Grooved shaft end approx 265mm.
Mounting plate holes spaced approx 130x80mm apart on centre.
Condition - Unit shows previous usage and wear. Open Hydraulic points leaking fluid.
Unknown if unit ifms functional.
Bulk Lot of Ramset Chemset Anchor Studs
Skylarc Ref F126590
Expected Auction End Time: 10th October 2021 6:45pm
Bulk Lot of Ramset Chemset Anchor Studs.
All packs appear to be type CS16190GH.
190mm stud length.
About 24x packs, most packs appear full, some others are partials.
Leftover Workshop bulk stock. Cardboard packs show moderate dust and some damage from workshop storage.
Pallet of Assorted Nuts, Bolts, Washers & More
Skylarc Ref E126589
Expected Auction End Time: 10th October 2021 6:05pm
Pallet of Assorted Nuts, Bolts, Washers & More.
Wide range of Assorted Fastening Hardware in wide variety of sizes.
Condition - Leftover Workshop stock. Some units show surface rusting from workshop storage.
Chubb Office Document Fire Safe
Skylarc Ref D126588
Expected Auction End Time: 10th October 2021 6:22pm
Chubb Office Document Fire Safe.
Serial No. NZ26320.
Key lock type door, key is included.
Interior dimensions are approx 570mm wide, 610mm deep, 1415mm high.
Adjustable inner steel shelves.
Condition - Has been sitting in a workshop storage room for some time so would benefit from a good surface clean. Door lock functions normally.
Buyer should bring appropriate vehicle or trailer for transporting this very heavy unit.
34x Assorted Milling Cutters, Drills, Bits
Skylarc Ref C126587
Expected Auction End Time: 10th October 2021 8:06pm
34x Assorted Milling Cutters, Drills, Bits.
Assorted types.
Assorted Metric and Imperial Sizes. Smallest 3/32" to largest of 1/2".
Condition varies greatly with each unit. Some appear as new in cases or coated in wax while others show usage or surface rusting from workshop storage.
35x Assorted Mill Cutter Bits
Skylarc Ref B126586
Expected Auction End Time: 10th October 2021 6:37pm
35x Assorted Mill Cutter Bits.
Assorted types, see photos.
Appear to be Imperial sizes, largest at 1" diameter.
Condition varies with each unit. Some show varying usage with some sueface rusting from storage. 20x units have wax protective coating on them so assuming these are potentially unused.
Large Grooved Milling Cutter
Skylarc Ref A126585
Expected Auction End Time: 10th October 2021 9:22pm
Large Grooved Milling Cutter.
Made in England by Walter Spencer & Co.
Type No. C372
VELOSU.R.H.S.
90° Incl.
Item measures approx 100mm diameter and 102mm wide.
See photos for further design details.
Some surface rust from storage.
6x Assorted Welding Electrode Packs
Skylarc Ref V126580
Expected Auction End Time: 10th October 2021 8:05pm
6x Assorted Welding Electrode Packs.
Includes:
- 2x packs of SatinChrome 347-16 electrodes, each 2.5x300mm.
- 1x pack of Cigweld Ferrocraft 61 Electrodes, each 2.5x350mm.
- 1x sealed unopened Metrode Electrodes type Nimrod 182KS, each 2.5x300mm.
- 1x BOC Smootharc type 18 Electrodes, each 2.5x350mm.
- 1x Weldwell type 28 electodes.
Condition - Satin Chrome and Metrode containers appear unused old stock. Other three packs are partials.
4x Packs of Weldwell Welding Electrodes
Skylarc Ref U126579
Expected Auction End Time: 10th October 2021 6:49pm
4x Packs of Weldwell Welding Electrodes.
Includes:
- 2x packs of Deep Penetratiin Electrodes type 31A, 3.2x380mm electrode size.
- 1x pack of General Purpose Electrodes type 48A, 3.2x380mm electrode size.
- 1x Low Hydrogen Electrodes type 77, 4.0x380mm electrode size.
Condition - 31A type packs are as new and factory sealed.. Other two packs have been previously opened and appear near full.
Assorted Aftermarket V8 Inlet Manifold Adapters and Parts
Skylarc Ref N128626
Expected Auction End Time: 10th October 2021 8:40pm
4 identical inlet manifold adapters
460mm long
110mm between centers of intake holes
32.5mm x 46.2mm intake holes on engine side
One unmatched intake
2 x 430mm long fuel rails
2 x 340mm long fuel rails
Aftermarket V8 Inlet Manifold Adapters
Skylarc Ref M128625
Expected Auction End Time: 10th October 2021 8:37pm
Three sets
Two the same
410mm long overall, 110mm between the center of each intake hole
39.3mm wide x 50mm tall holes on the engine side
Single set
420mm long
110mm between centers of each intake hole
31mm x 65mm holes on engine side
3x Packs of Weldwell C6H & Filarc KV5L Welding Electrodes
Skylarc Ref T126578
Expected Auction End Time: 10th October 2021 6:30pm
3x Packs of Weldwell C6H & Filarc KV5L Welding Electrodes.
Includes:
- 2x packs of Weldwell Low Hydrogen Electrodes type C6H, 4.0x450mm size.
- 1x pack of Filarc Electrodes type KV5L, 350mm length, diameter unknown.
Condition - All packs are still factory sealed and unopened. Dusty surfaces from workshop storage
4x Packs of Philips KV2 Welding Electrodes
Skylarc Ref S126577
Expected Auction End Time: 10th October 2021 8:09pm
4x Packs of Philips KV2 Welding Electrodes.
350mm long, 4mm diameter Electrodes.
All packs are opened but appear full or near full, counts in each not verified. Packages dusty from workshop storage.
6x Vintage EMF Pipe craft 7010 Cellulose Type Welding Electrodes
Skylarc Ref N126572
Expected Auction End Time: 10th October 2021 9:56pm
6x Vintage EMF Pipe craft 7010 Cellulose Type Welding Electrodes.
All packs are still factory sealed but appear old, possibly 1960's era, see photos.
Most type markings are worn off packs, the one visible label says gauge 12 SWG, diameter 0.104".
Each pack is approx 310mm.
Condition - Packs are "as new" as they are still factory sealed but are quite old, see photos. Condition of electodes inside packs is unknown.
ESAB Extra Low Carbon Stainless Steel Welding Electrodes, 4.0mm size
Skylarc Ref O129199
Expected Auction End Time: 10th October 2021 9:30pm
ESAB Extra Low Carbon Stainless Steel Welding Electrodes.
Type No. OK 63.30.
Each electrode is 4.0x350mm.
2x sealed unopened packs with 78x electrodes each.
Includes opened storage box. Box shows Workshop storage wear.
See the ESAB weblink below for further item details:
https://www.esab.co.uk/gb/en/products/filler-metals/covered-stick-electrodes-smaw/stainless-steel-electrodes/ok-63-30.cfm
ESAB Low Hydrogen AC/DC Welding Electrodes, 4.0mm size
Skylarc Ref N129198
Expected Auction End Time: 10th October 2021 7:21pm
ESAB Low Hydrogen AC/DC Welding Electrodes.
Type No. OK 53.70.
Each electrode is 4.0x400mm.
4x 4kg Vacuum sealed packs awarded within box.
As new unopened.
See the ESAB weblink below for further item details:
https://www.esabasia.com/asia/en/products/filler-metals/covered-stick-electrodes-smaw/mild-steel-electrodes/ok-53-70.cfm
ESAB Austenitic Stainless Steel Welding Electrodes, 4.0mm size
Skylarc Ref M129197
Expected Auction End Time: 10th October 2021 6:44pm
ESAB Austenitic Stainless Steel Welding Electrodes.
Type No. OK 67.45.
Each electrode is 4.0x350mm.
6x packs with 33x Electrodes per pack.
Condition - All packs are as new and factory vacuum sealed. Box shows Workshop storage wear.
See the ESAB weblink below for further item details:
https://www.esabna.com/us/en/products/filler-metals/covered-stick-electrodes-smaw/stainless-steel-electrodes/ok-67-45.cfm
9x Packs of Weldwell KV5 2.5mm Low Hydrogen Welding Electrodes
Skylarc Ref L129196
Expected Auction End Time: 10th October 2021 8:23pm
9x Packs of Weldwell KV5 2.5mm Low Hydrogen Welding Electrodes.
300mm rod length, 2.5mm diameter.
9x sealed unopened packs in 2x opened boxes, see photos.
Electrodes are as new and sealed in their packs. Boxes show Workshop storage wear.
Weldwell Low Hydrogen Welding Electrodes, 4.0mm size
Skylarc Ref F129190
Expected Auction End Time: 10th October 2021 6:35pm
Weldwell Low Hydrogen Welding Electrodes, 4.0mm size.
Type No. 77.
Made in NZ.
Main box is opened and one packet of rods is missing. Remaining two packets of rods are as new and unopened.
12x Assorted Partial Used Welding Wire Spools
Skylarc Ref B129186
Expected Auction End Time: 10th October 2021 6:56pm
12x Assorted Partial Used Welding Wire Spools.
Includes assorted brands and types including some stainless steel varieties.
Amounts of wire remaining on each spool varies greatly.
Some wire showd rust spotting from long term open workdhop storage. Others include their original boxes.
9x Assorted Partial Used Welding Wire Spools
Skylarc Ref A129185
Expected Auction End Time: 10th October 2021 7:35pm
9x Assorted Partial Used Welding Wire Spools.
Includes assorted brands and types including some stainless steel varieties.
Amounts of wire remaining on each spool varies greatly.
Some wire showd rust spotting from long term open workdhop storage. Others include their original boxes.
11x Assorted Partial Used Welding Wire Spools
Skylarc Ref Z129184
Expected Auction End Time: 10th October 2021 8:35pm
11x Assorted Partial Used Welding Wire Spools.
Includes assorted brands and types including some stainless steel varieties.
Amounts of wire remaining on each spool varies greatly.
Some wire showd rust spotting from long term open workdhop storage. Others include their original boxes.
Assorted Lot of Door & Lock Accessories, Components, Parts
Skylarc Ref S129177
Expected Auction End Time: 10th October 2021 7:01pm
Assorted Lot of Door & Lock Accessories, Components, Parts.
Items made in NZ.
Includes assorted Pedistal packer Spacer blocks, flush pull Lever Housings, brass "No Circulars" sign, and more. See photos for further details on items included.
Condition - As new leftover manufacturer's stock. Most items in packaging. Packaging shows dust and fading from long term storage. Some components may be incomplete.
4x Stylish Quality Door Lever Handle Sets by Bloore & Piller, New
Skylarc Ref R129176
Expected Auction End Time: 10th October 2021 8:26pm
4x Stylish Quality Door Lever Handle Sets by Bloore & Piller.
Made in NZ.
Brass construction:
Includes the following sets:
- 1x BPL300SC Lever lock set in Satin Chrome.
- 3x BPL300AB Lever lock set in Antique Bronze.
See photos for further style details.
Condition - As new leftover manufacturer's stock. Boxes show wear from long term storage.
4x Stylish Quality Door Lever Handle Sets by Bloore & Piller, New
Skylarc Ref Q129175
Expected Auction End Time: 10th October 2021 6:18pm
4x Stylish Quality Door Lever Handle Sets by Bloore & Piller.
Made in NZ.
Brass construction.
Includes the following sets:
- BPL805 AB Lever set in Antique Bronze.
- BPL801 RPB Lever set in polished brass.
- 2x BPL805 RSC Lever sets in Satin Chrome.
- BPL150SC Ball Knob unit in satin chrome.
- 1x Lever set in unmarked box with antique brass finish to handles. Note this set is missing its attachment hardware.
See photos for further style details.
Condition - As new leftover manufacturer's stock. Boxes show storage wear.
3x Stylish Quality Door Lever Handle Sets by Bloore & Piller, New
Skylarc Ref P129174
Expected Auction End Time: 10th October 2021 9:24pm
3x Stylish Quality Door Lever Handle Sets by Bloore & Piller, New.
Made in NZ.
Brass construction.
Includes the following styles and finishes:
- 1x BPL806 RSN Kaka door lever in Satin Nickel.
- 1x BPL806 RSC Kaka door lever set in Satin Chrome (Note attachment hardware is missing for this set).
- 1x BPL806 AB Kaka door Lever set in Antique bronze.
See photos for further style details.
Condition - All are as new leftover manufacturer's stock. Boxes show wear from storage. Opened for photos.
4x Stylish Quality Door Handle Sets by Bloore & Piller, New
Skylarc Ref O129173
Expected Auction End Time: 10th October 2021 7:46pm
4x Stylish Quality Door Handle Sets by Bloore & Piller, New.
Made in NZ.
Brass construction.
Includes the following styles and finishes:
- 3x BPP806 SC 300B door pull sets in satin chrome, 300mm length.
- 1x BPP800 150B door pill set in Satin Chrome, 150mm length.
See photos for further style details.
Condition - All are as new leftover manufacturer's stock. Boxes show wear from storage. Some sets opened for photos.
4x Stylish Quality Door Handle Sets by Bloore & Piller, New
Skylarc Ref N129172
Expected Auction End Time: 10th October 2021 9:49pm
4x Stylish Quality Door Handle Sets by Bloore & Piller, New.
Made in NZ.
Brass construction.
Includes the following styles and finishes:
- 2x BPP801 CP 250B door pull sets in Polished chrome, 250mm length.
- 1x BPP805 AB 150B door pill set in Antique Brass, 150mm length.
- 1x BPP805 SC 300B door pull set in Satin Chrome, 300mm length (Note this set is missing its roses).
See photos for further style details.
Condition - All are as new leftover manufacturer's stock. Boxes show wear from storage.
4x Stylish Quality Satin Chrome Door Handle Sets by Bloore & Piller, New
Skylarc Ref M129171
Expected Auction End Time: 10th October 2021 7:13pm
4x Stylish Quality Chrome Door Handle Sets by Bloore & Piller, New.
Made in NZ.
All four sets are Part No. BPP800 SC 200B.
Brass construction with satin chrome finish on all sets.
Each handle is 230mm long.
Includes mounting hardware with three sets.
See photos for further style details.
Condition - All are as new leftover manufacturer's stock. One complete set unpackaged for photos. One other set has been previously opened and is missing its roses. Boxes show wear from storage.
4x Stylish Quality Chrome Door Handle Sets by Bloore & Piller, New
Skylarc Ref L129170
Expected Auction End Time: 10th October 2021 9:17pm
4x Stylish Quality Chrome Door Handle Sets by Bloore & Piller, New.
Made in NZ.
All sets are Part No. BPP801 CP 200B.
Brass construction with chrome finish on all sets.
Each handle is 235mm long.
Includes mounting hardware.
Condition - All are as new leftover manufacturer's stock. One set unpackaged for photos only. Boxes show wear from storage.
Austmig 309LSI Stainless Steel MIG Welding Wire, 1.2mm Size
Skylarc Ref J129168
Expected Auction End Time: 10th October 2021 8:53pm
Austmig 309LSI Stainless Steel MIG Welding Wire, 1.2mm Size.
Unsure if some wire on spool has been used. Spool appears near full.
Note - Spool is NOT within its original box.
Lincoln Electric Innersheild NR-211-MP1.2mm Flux Cored Welding Wire
Skylarc Ref E129163
Expected Auction End Time: 10th October 2021 8:14pm
Lincoln Electric Innersheild NR-211-MP1.2mm Flux Cored Welding Wire.
Condition - Wire as new and still sealed in manufactures plastic. Box has been opened and shows Workshop storage wear.
BOC ER309LSI Stainless Steel MIG Welding Wire, 0.9mm Size
Skylarc Ref C129161
Expected Auction End Time: 10th October 2021 6:08pm
BOC ER309LSI Stainless Steel MIG Welding Wire, 0.9mm Size.
Condition - As new older unused stock. Wire still sealed in manufacturer plastic. Box shows moderate damage from long term workshop storage. Box opened by us for photos only.
Large Assortment of Welding Filler Rods
Skylarc Ref B129160
Expected Auction End Time: 10th October 2021 9:24pm
Large Assortment of Welding Filler Rods.
Approx 30x partial packs of Welding Filler rods with lengths from 1000mm to 1200mm.
Many packs appear to be stainless steel variety. Or materials also included.
Assorted brands including BOC, Sandvik, Hobart, and more.
Condition varies with each pack. Most all are partials and have been stored open.
Austmig 316LSI Stainless Steel Gas Metalarc Welding Wire, 0.9mm Size
Skylarc Ref Z129158
Expected Auction End Time: 10th October 2021 7:06pm
Austmig 316LSI Stainless Steel Gas Metalarc Welding Wire, 0.9mm Size.
As new and still factory plastic sealed roll. Box exterior shows wear and fading from long term storage.
Austmig 309LSI Stainless Steel Gas Metalarc Welding Wire, 0.9mm Size
Skylarc Ref Y129157
Expected Auction End Time: 10th October 2021 6:33pm
Austmig 309LSI Stainless Steel Gas Metalarc Welding Wire, 0.9mm Size.
As new and still factory plastic sealed roll. Box exterior shows wear and fading from long term storage.
Austmig 309LSI Stainless Steel Gas Metalarc Welding Wire, 0.9mm Size
Skylarc Ref X129156
Expected Auction End Time: 10th October 2021 6:46pm
Austmig 309LSI Stainless Steel Gas Metalarc Welding Wire, 0.9mm Size.
As new and still factory plastic sealed roll. Box exterior shows wear and fading from long term storage.
53x Assorted Plastic Stackable Parts Bins
Skylarc Ref W129155
Expected Auction End Time: 10th October 2021 8:03pm
53x Assorted Plastic Stackable Parts Bins.
Includes:
- 40x Lamson Size 4 bins, each 230x150x120mm.
- 1x Lamson Fix SSI bin at 165x100x75mm.
- 12x Unknown brand blue bins each approx 275x140x120mm.
Condition varies with each unit.
6x Quality Stylish Door Handle Sets by Bloore & Piller
Skylarc Ref V129154
Expected Auction End Time: 10th October 2021 9:26pm
6x Quality Stylish Door Handle Sets by Bloore & Piller.
Made in NZ.
Brass construction.
All units are 800 Series "Robin" style.
Includes:
- 3x Sets in Chrome finish.
- 2x Sets in Antique Bronze finish, plus one partial set.
- 1x set in polished brass finish plus one partial set.
Condition - Leftover new manufacturer's stock. Complete sets opened for photos and inspection only. Mounting hardware included with full sets. Includes two partial sets with just one handle unit in each.
5x Quality Stylish Door Handles by Bloore & Piller, New
Skylarc Ref U129153
Expected Auction End Time: 10th October 2021 6:04pm
5x Quality Stylish Door Handles.
Made in NZ by Bloore & Piller.
Brass construction with 3x units with antique bronze finish and 2x units with satin chrome finish.
Lengths are 435mm (2x units), 335mm (2x units), and 285mm (1x unit).
See photos for more style details.
Condition - As new leftover manufacturer's stock. Items unwrapped for photos only.
42x Curved Quadrant Window Stay Sets, Bulk Lot, New
Skylarc Ref T129152
Expected Auction End Time: 10th October 2021 7:45pm
42x Curved Quadrant Window Stay Sets, Bulk Lot, New
Made in NZ.
Brass construction.
Includes:
- 18x Part No. CHH1006 SN in Satin Nickel finish.
- 23x Part No. CHH1006 SC in Satin Chrome finish.
Each stay curved arm is approx 150mm long.
Condition - As new leftover manufacturer's supply stock. Items bulk wrapped in boxes. A few opened for same photos.
Assorted Quality Door Lock Roses, Knobs, Hardware
Skylarc Ref S129151
Expected Auction End Time: 10th October 2021 7:01pm
Assorted Quality Door Lock Roses, Knobs, Hardware.
Items made in NZ.
Brass construction with satin chrome, polished chrome, and antique bronze finishes.
Circular roses with various locking knobs, holes for key mechanisim, etc each approx 54mm diameter.
Over 100+ individual units in auction.
See photos for further details on items included.
Condition - Leftover unused manufacturer's parts supply stock. Many items in bags.
Modern Stylish Polished Chrome Door Pull Handles by Bloore & Piller
Skylarc Ref R129150
Expected Auction End Time: 10th October 2021 7:53pm
Modern Stylish Polished Chrome Door Pull Handles by Bloore & Piller.
Part No. BPP702 Chameleon
Made in Taranaki region NZ of solid brass.
Polished Chrome finish.
Each handle is 450mm in length.
Includes handles for front and back sides of door.
See photos for further style details.
Condition - Leftover as new discontinued manufacturer's factory stock. Handle set carefully unwrapped for photos only.
See our other listings for other similar door hardware from this NZ manufacturer.
2x Modern Stylish Satin Chrome Door Pull Handles by Bloore & Piller
Skylarc Ref Q129149
Expected Auction End Time: 10th October 2021 6:56pm
2x Modern Stylish Satin Chrome Door Pull Handles by Bloore & Piller.
Both sets are Part No. BPP805 SC 200B
Made in Taranaki region NZ of solid brass.
Satin Chrome finish.
Each handle is 230mm in length.
Includes handles for front and back sides of door.
See photos for further style details.
Condition - Leftover as new discontinued manufacturer's factory stock. One Handle set carefully unwrapped for photos only, other set is still factory wrapped.
See our other listings for other similar door hardware from this NZ manufacturer.
Modern Stylish Satin Chrome Door Pull Handles by Bloore & Piller, New
Skylarc Ref P129148
Expected Auction End Time: 10th October 2021 9:56pm
Modern Stylish Satin Chrome Door Pull Handles by Bloore & Piller.
Part No. BPP805 SC 400B
Made in Taranaki region NZ of solid brass.
Satin Chrome finish.
Each handle is 435mm in length.
Includes handles for front and back sides of door.
See photos for further style details.
Condition - Leftover as new discontinued manufacturer's factory stock. Handle set carefully unwrapped for photos only.
See our other listings for other similar door hardware from this NZ manufacturer.
3x Modern Stylish Satin Chrome Door Pull Handles by Bloore & Piller
Skylarc Ref O129147
Expected Auction End Time: 10th October 2021 7:55pm
3x Modern Stylish Satin Chrome Door Pull Handles by Bloore & Piller.
Part No. BPP801 SC 400B
Made in Taranaki region NZ of solid brass.
Satin Chrome finish.
Each handle is 435mm in length.
Includes handles for front and back sides of door.
3x matching Sets in auction. .
See photos for further style details.
Condition - Leftover as new discontinued manufacturer's factory stock. One Handle set carefully unwrapped for photos only, other two still wrapped.
Note - Includes only 1x rose end piece, 11x others are missing. Mounting hardware missing.
See our other listings for other similar door hardware from this NZ manufacturer.
Modern Stylish Satin Chrome Door Pull Handles by Bloore & Piller, New
Skylarc Ref N129146
Expected Auction End Time: 10th October 2021 7:53pm
Modern Stylish Satin Chrome Door Pull Handles by Bloore & Piller, New.
Part No. BPP710 Tuatara
Made in Taranaki region NZ of solid brass.
Satin Chrome finish.
Each handle is 395mm in length.
Includes handles for front and back sides of door.
Includes mounting hardware.
See photos for further style details.
Condition - Leftover as new discontinued manufacturer's factory stock. Handles carefully unwrapped for photos only.
See our other listings for more similar door hardware from this NZ manufacturer.
Modern Stylish Satin Chrome Door Pull Handles by Bloore & Piller, New
Skylarc Ref M129145
Expected Auction End Time: 10th October 2021 7:55pm
Modern Stylish Satin Chrome Door Pull Handles by Bloore & Piller, New.
Part No. BPP710 Tuatara
Made in Taranaki region NZ of solid brass.
Satin Chrome finish.
Each handle is 395mm in length.
Includes handles for front and back sides of door.
Includes mounting hardware.
See photos for further style details.
Condition - Leftover as new discontinued manufacturer's factory stock. Handles carefully unwrapped for photos only.
See our other listings for more similar door hardware from this NZ manufacturer.
Modern Stylish Satin Chrome Door Pull Handles by Bloore & Piller, New
Skylarc Ref L129144
Expected Auction End Time: 10th October 2021 6:53pm
Modern Stylish Satin Chrome Door Pull Handles by Bloore & Piller, New.
Part No. BPP710 Tuatara
Made in Taranaki region NZ of solid brass.
Satin Chrome finish.
Each handle is 395mm in length.
Includes handles for front and back sides of door.
Includes mounting hardware.
See photos for further style details.
Note - Photos of unwrapped handles are indicative. This specific set comes still factory wrapped.
Condition - Leftover as new discontinued manufacturer's factory stock..
See our other listings for more similar door hardware from this NZ manufacturer.
Modern Stylish Satin Chrome Door Pull Handles by Bloore & Piller, New
Skylarc Ref K129143
Expected Auction End Time: 10th October 2021 7:02pm
Modern Stylish Satin Chrome Door Pull Handles by Bloore & Piller, New.
Part No. BPP710 Tuatara
Made in Taranaki region NZ of solid brass.
Satin Chrome finish.
Each handle is 395mm in length.
Includes handles for front and back sides of door.
Includes mounting hardware.
See photos for further style details.
Note - Photos of unwrapped handles are indicative. This specific set comes still factory wrapped.
Condition - Leftover as new discontinued manufacturer's factory stock..
See our other listings for more similar door hardware from this NZ manufacturer.
Modern Stylish Antique Bronze Door Pull Handles by Bloore & Piller, New
Skylarc Ref J129142
Expected Auction End Time: 10th October 2021 8:27pm
Modern Stylish Antique Bronze Door Pull Handles by Bloore & Piller, New.
Part No. BPP703
Made in Taranaki region NZ of solid brass.
Antique Bronze finish.
Each handle is 480mm in length.
Includes handles for front and back sides of door.
Includes mounting hardware.
See photos for further style details.
Note - Photos of unwrapped handles are indicative. This specific set comes still factory wrapped.
Condition - Leftover as new discontinued manufacturer's factory stock..
See our other listings for more similar door hardware from this NZ manufacturer.
Modern Stylish Antique Bronze Door Pull Handles by Bloore & Piller, New
Skylarc Ref I129141
Expected Auction End Time: 10th October 2021 6:43pm
Modern Stylish Antique Bronze Door Pull Handles by Bloore & Piller, New.
Part No. BPP703
Made in Taranaki region NZ of solid brass.
Antique Bronze finish.
Each handle is 480mm in length.
Includes handles for front and back sides of door.
Includes mounting hardware.
See photos for further style details.
Condition - Leftover as new discontinued manufacturer's factory stock. This set was carefully unwrapped for photos only
See our other listings for more similar door hardware from this NZ manufacturer.
Unimig Mig Welder
Skylarc Ref X129234
Expected Auction End Time: 10th October 2021 9:20pm
Model: Unimig 3003 IS
Three Phase
Miller Spoolmatic 30A spool gun
Miller MMP pulse GMAW controller
Miller RFCS-14 foot controller
Mig gun
Has been stored in a container with high moisture content and will need inspection before use.
18x Fanlight & Casement Window Security Lock Kits
Skylarc Ref H129140
Expected Auction End Time: 10th October 2021 7:42pm
18x Fanlight & Casement Window Security Lock Kits.
Cambrian branded packaging.
Made in NZ.
Includes:
- 11x Satin Chrome Fanlight locks.
- 2x Satin Nickel Fanlight locks.
- 5x Antique Bronze Casement locks.
Condition - As new leftover manufacturer's stock. Most sets are complete in retail packaging, two sets are missing a components, four Casement locks are missing packaging and screws.
36x Window Fasteners, Bulk Lot, New
Skylarc Ref G129139
Expected Auction End Time: 10th October 2021 8:18pm
36x Window Fasteners, Bulk Lot, New
Made in NZ.
Brass construction.
Cambrian branded packaging.
Includes the following Finishes:
- 7x Polished Brass.
- 6x Antique Bronze.
- 7x Satin Chrome.
- 16x Satin Nickel.
Handles are approx 60mm long.
Condition - Leftover as new manufacturer's stock. Most units in retail packaging. A few are loose or in incomplete packaging.
24x 250mm Fanlight Window Stays, Bulk Lot
Skylarc Ref F129138
Expected Auction End Time: 10th October 2021 9:06pm
24x 250mm Fanlight Window Stays, Bulk Lot
Made in NZ.
Solid brass construction.
All units in Antique Bronze finish.
All units 250mm length.
Condition - All 24x units are new leftover manufacturer's stock without retail packaging. Mounting screws not included.
See our other listings for more of these units in different lengths and finishes.
44x 250mm Casement & Fanlight Window Stays, Bulk Lot, New
Skylarc Ref E129137
Expected Auction End Time: 10th October 2021 7:09pm
44x 250mm Casement & Fanlight Window Stays, Bulk Lot, New.
Made in NZ.
Cambrian Hardware retail packaging.
Solid brass construction.
Includes the following finishes and types:
- 8x Polished Brass Fanlight Stays.
- 18x Antique Bronze Fanlight Stays.
- 10x Satin Chrome Casement Stays.
- 8x Satin Chrome Fanlight Stays.
All units 250mm length.
Condition - All 44x units are new leftover manufacturer's stock in retail packaging.
See our other listings for more of these units in different lengths and finishes.
Lincoln Welding Power Supply
Skylarc Ref V129232
Expected Auction End Time: 10th October 2021 7:05pm
Model: Lincoln Electric Idealarc CV400-I
400 amp welding power source
Miller S-22A wire feed
Various Mig and Tig welding guns
Machine has been stored in a container with high moisture content. Needs thorough inspection before being operated
33x 250mm Casement & Fanlight Window Stays, Bulk Lot, New
Skylarc Ref D129136
Expected Auction End Time: 10th October 2021 7:01pm
33x 250mm Casement & Fanlight Window Stays, Bulk Lot, New.
Made in NZ.
Solid brass construction.
Cambrian Hardware retail packaging..
All units in Satin Nickel finish.
All units 250mm length.
Two units are Fanlight type, remaining 31x units are Casement type.
Condition - All 33x units are new leftover manufacturer's stock in retail packaging.
See our other listings for more of these units in different lengths and finishes.
32x 300mm Fanlight Window Stays, Bulk Lot, New
Skylarc Ref C129135
Expected Auction End Time: 10th October 2021 8:03pm
32x 300mm Fanlight Window Stays, Bulk Lot, New.
Made in NZ.
Solid brass construction.
Cambrian Hardware retail packaging..
Includes 9x units in Antique Bronze and 23x units in Satin Nickel finish.
All units 300mm length.
Condition - All 32x units are new leftover manufacturer's stock in retail packaging.
See our other listings for more of these units in different lengths and finishes.
36x 300mm Fanlight Window Stays, Bulk Lot, New
Skylarc Ref B129134
Expected Auction End Time: 10th October 2021 6:14pm
36x 300mm Fanlight Window Stays, Bulk Lot, New.
Made in NZ.
Solid brass construction.
Cambrian Hardware retail packaging..
Includes 10x units in Polished Chrome and 26x units in Satin Chrome finish.
All units 300mm length.
Condition - All 36x units are new leftover manufacturer's stock in retail packaging.
See our other listings for more of these units in different lengths and finishes.
32x 350mm Fanlight Window Stays, Bulk Lot, New
Skylarc Ref A129133
Expected Auction End Time: 10th October 2021 8:18pm
32x 350mm Fanlight Window Stays, Bulk Lot, New.
Made in NZ.
Solid brass construction.
Cambrian Hardware retail packaging..
Includes 7x units in Antique Bronze and 25x units in Satin Nickel finish.
All units 350mm length.
Condition - All 32x units are new leftover manufacturer's stock in retail packaging.
See our other listings for more of these new units in different lengths and finishes.
36x 350mm Fanlight Window Stays, Bulk Lot, New
Skylarc Ref Z129132
Expected Auction End Time: 10th October 2021 8:13pm
36x 350mm Fanlight Window Stays, Bulk Lot, New.
Made in NZ.
Solid brass construction.
Cambrian Hardware retail packaging..
Satin Chrome finish.
All units 350mm length.
Condition - All 36x units are new leftover manufacturer's stock in retail packaging.
See our other listings for more of these new units in other lengths and finishes.
54x Split Rail Cabinet Door Fasteners, New Bulk Lot
Skylarc Ref Y129131
Expected Auction End Time: 10th October 2021 8:20pm
54x Split Rail Cabinet Door Fasteners, New Bulk Lot.
Handles approx 70mm long.
16x Satin Nickel finish and 36x in Polished Chrome finish.
Includes Spit Rail and Bottom Rail types
Condition - Leftover as new manufacturer's old stock. Most units in retail packaging. A few loose units and extra components included.
See our other listings for more of these type handles in other finishes.
90+ Split Rail Cabinet Door Fasteners, New Bulk Lot
Skylarc Ref X129130
Expected Auction End Time: 10th October 2021 8:41pm
90+ Split Rail Cabinet Door Fasteners, New Bulk Lot.
Handles approx 70mm long.
Satin Chrome finish
Includes Spit Rail type.
Condition - Leftover as new manufacturer's old stock. Most units in retail packaging. A few loose units and extra components included.
See our other listings for more of these type handles in other finishes.
100+ Split Rail & Wedge Cabinet Door Fasteners, New Bulk Lot
Skylarc Ref W129129
Expected Auction End Time: 10th October 2021 6:02pm
100+ Split Rail & Wedge Cabinet Door Fasteners, New Bulk Lot.
Handles approx 70mm long.
Bronze and Florentine Bronze finishes
Includes Spit Rail, Standard Wedge, and Streamline Wedge types.
Condition - Leftover as new manufacturer's old stock. Most units in retail packaging. Some others in bags only. A few loose units and extra components included.
See our other listings for more of these type handles in other finishes.
100+ Split Rail & Wedge Cabinet Door Fasteners, New Bulk Lot
Skylarc Ref V129128
Expected Auction End Time: 10th October 2021 6:30pm
100+ Split Rail & Wedge Cabinet Door Fasteners, New Bulk Lot.
Handles approx 70mm long.
Polished brass finish
Includes Spit Rail, Standard Wedge, Flush and Streamline Wedge types.
Condition - Leftover as new manufacturer's old stock. Most units in retail packaging. A few loose units and extra components included.
See our other listings for more of these handles in other finishes.
37x Assorted Flush Bolts, Bulk Lot
Skylarc Ref U129127
Expected Auction End Time: 10th October 2021 9:23pm
37x Assorted Flush Bolts, Bulk Lot.
Items made in NZ.
Assorted sizes and finishes.
See photos for further details on styles and designs.
All items are as new leftover manufacturer's bulk stock. Some units in packaging. Other units are as new buy without packaging. Some packaging shows dust from storage.
21x Heavy Duty Stylish Floor Mounted Pedistal Latchbacks, Bulk Lot
Skylarc Ref T129126
Expected Auction End Time: 10th October 2021 8:58pm
21x Heavy Duty Stylish Floor Mounted Pedistal Latchbacks, Bulk Lot.
Items made in NZ.
Includes Anodised Silver, Antique Brass, and Antique Bronze finishes.
Heights include 150mm, 200mm and 300mm.
See photos for further item Style details.
All 21x units are new unused leftover manufacturer's bulk stock. Packaging may show dust from storage.
72x Assorted Necked Flush Bolts, Bulk Lot
Skylarc Ref S129125
Expected Auction End Time: 10th October 2021 7:51pm
72x Assorted Necked Flush Bolts, Bulk Lot.
Items made in NZ.
Assorted sizes and finishes.
See photos for further details on styles and designs.
All items are as new leftover manufacturer's bulk stock. Some packaging shows dust from storage.
50x Assorted Necked Flush Bolts, Bulk Lot
Skylarc Ref R129124
Expected Auction End Time: 10th October 2021 9:30pm
50x Assorted Necked Flush Bolts, Bulk Lot.
Items made in NZ.
Assorted sizes and finishes.
See photos for further details on styles and designs.
All items are as new leftover manufacturer's bulk stock. Most units in packaging. Some packaging shows dust from storage.
39x 75x83mm Black Aluminium Butt Hinges, Bulk Lot
Skylarc Ref Q129123
Expected Auction End Time: 10th October 2021 9:57pm
39x 75x83mm Black Aluminium Butt Hinges, Bulk Lot
Hinges made in NZ.
All units are type CAH1530.
Black powder coated finish.
Condition - As new leftover manufacturer's bulk stock. Hinges in one box show light dust from open box storage.
Assorted Bulk Lots of Hinges
Skylarc Ref P129122
Expected Auction End Time: 10th October 2021 7:34pm
Assorted Bulk Lots of Hinges.
All hinges made in NZ.
Includes:
- 13x 50x38mm Black powder coated aluminium butt hinges type CAH520
- 20x 150x83mm silver Anodised aluminium swinger hinges type CAH1950
- 18x 50x83mm silver Anodised aluminium butt hinges type CAH1120.
- 20x 100x83mm black powder coated aluminum butt hinges type CAH1330.
- 32x 100x83mm black powder coated aluminium butt hinges type CAH1630.
- 11x Assorted Loose hinges.
Condition - As new left over manufacturer's bulk stock.
60x Black 83x75mm Flush Butt Hinges, Bulk Lot, New
Skylarc Ref O129121
Expected Auction End Time: 10th October 2021 9:07pm
60x Black 83x75mm Flush Butt Hinges, Bulk Lot, New.
Manufactured in NZ.
All are Part No. CAH1230
Aluminium construction with black powder coated finish.
Each is 83x75mm.
3x bulk hinge boxes in auction, with 20x hinges per box.
Condition - New unused manufacturer leftover bulk stock.
See our other listings for more of this hinge type.
40x Black 83x75mm Flush Butt Hinges, Bulk Lot, New
Skylarc Ref N129120
Expected Auction End Time: 10th October 2021 9:36pm
40x Black 83x75mm Flush Butt Hinges, Bulk Lot, New.
Manufactured in NZ.
All are Part No. CAH1230
Aluminium construction with black powder coated finish.
Each is 83x75mm.
2x bulk hinge boxes in auction, with 20x hinges per box.
Condition - New unused manufacturer leftover bulk stock.
Photos are indicative. See our other listings for more bulk lots of these hinges.
40x Black 83x75mm Flush Butt Hinges, Bulk Lot, New
Skylarc Ref M129119
Expected Auction End Time: 10th October 2021 7:11pm
40x Black 83x75mm Flush Butt Hinges, Bulk Lot, New.
Manufactured in NZ.
All are Part No. CAH1230
Aluminium construction with black powder coated finish.
Each is 83x75mm.
2x bulk hinge boxes in auction, with 20x hinges per box.
Condition - New unused manufacturer leftover bulk stock.
Photos are indicative. See our other listings for more bulk lots of these hinges.
Sertom 40mm Pyramid Plate Rollers
Skylarc Ref A129211
Expected Auction End Time: 10th October 2021 7:04pm
Model: Sertom EMO 40-25
Serial number 2176
Manufactured 2006
Roller length 4100mm
Fully hydraulic
Separate controller with digital display
Machine has been stored outside (although covered until recently)
Running when removed but now shows errors
Control panel stored inside
Machine powers up but shows top angle roller error and electric motor faults
Machine weighs 22 tons and you will need your own lifting machinery
Opportunity to own a serious set of rollers at a bargain price
21x Antique / Vintage Brass Thumb Tabs
Skylarc Ref B129108
Expected Auction End Time: 10th October 2021 7:02pm
21x Antique / Vintage Brass Thumb Tabs.
Each is approx 22mm.wide.
Threaded shanks approx 6mn diameter.
See photos for design details.
Age of items is unknown.
Condition varies with each unit. Some tarnishing to brass. 2x units have missing threaded shanks
100+ Assorted Milling Drills & Jobber Drill Bits
Skylarc Ref A129107
Expected Auction End Time: 10th October 2021 6:57pm
100+ Assorted Milling Drills & Jobber Drill Bits.
Wide variety of sizes and lengths.
Largest diameter 22mm.
Condition varies greatly with each unit. Many show surface rusting from workshop storage.
3x Assorted Lathe Turning Tools
Skylarc Ref Y129105
Expected Auction End Time: 10th October 2021 8:40pm
3x Assorted Lathe Turning Tools.
Includes:
- Iscar SVJCR 2020K-16
- Unknown brand Tool type SCLCR 2020 K09
- Unknown brand Tool type MWLNR 2525M 06
All units have surface rusting from workshop storage
5x Assorted Milling Drill Holders
Skylarc Ref X129104
Expected Auction End Time: 10th October 2021 7:41pm
5x Assorted Milling Drill Holders.
One unit is branded Alfred Herbert, England. Other four are unknown manufacturers.
Mounting shanks on each are 38mm diameter.
See photos for further details on design/type of these units.
3x Lathe Tooling Holders
Skylarc Ref T125200
Expected Auction End Time: 10th October 2021 9:17pm
3x Lathe Tooling Holders.
Unknown manufacturer.
Each unit is approx 68x50x50mm.
Tooling slots are approx 15mm wide.
One unit has Tooling slots on two sides, one unit has slots on three sides, one unit has slots on four sides.
Some Tooling hold down screws are missing.
See photos for further design/type details.
Some sueface rusting from workshop storage.
8x Lathe Tooling Holders
Skylarc Ref S125199
Expected Auction End Time: 10th October 2021 8:36pm
8x Lathe Tooling Holders.
Each unit measures approx 83x52x50mm.
Slot for Tooling measures approx 30mm wide, 13mm deep on each unit.
See photos for further details on design/type.
Note - There are 8x units of same dimension and design in auction though one unit is not in photos.
16x Assorted Milling Drill Holders & Thread Tapers
Skylarc Ref Q125197
Expected Auction End Time: 10th October 2021 7:58pm
16x Assorted Milling Drill Holders & Thread Tapers.
Unknown manufacturer on 13x units, 3x Units are Ward branded.
Max diameter of each unit is 50mm.
Mounting shanks on 13x units are 20mm Diameter, 2x Units at 32mm, 1x unit at 40mm diameter.
See photos for further details on dezign/type of drill holders that these units are.
Includes assorted other bits, parts etc, see photos.
Surface rusting from open Workshop storage.
Perkins Elmer Optical Emission Spectrometer
Skylarc Ref U129205
Expected Auction End Time: 10th October 2021 9:27pm
Model: Perkins Elmer Optima 2100 DV
Part number N0800540
Serial number 080N6120603
Purchased new by the current owner in 2004
Used for waste water testing
Has seen very little use
Includes some accessories
Jacobs Keyed Drill Chucks, 10mm & 13mm Sizes
Skylarc Ref P125196
Expected Auction End Time: 10th October 2021 9:20pm
Jacobs Keyed Drill Chucks.
Both units made in USA.
1x Model No. 11N size 10mm Chuck.
1x Model No. 14N size 13mm chuck.
Both Chucks have a 20mm Diameter, 60mm long mounting shank.
Both Chucks missing Chuck Keys.
Cetac ASX-520 Auto Sampler
Skylarc Ref N125194
Expected Auction End Time: 10th October 2021 7:50pm
Cetac ASX-520 Auto Sampler.
Unit measures approx 525x450x255mm.
Includes power adapter cable.
Condition - Was previously used in an industrial Workshop setting. Has been in storage for some time. Some surface dust and marks from open storage. Unit powers on but has not been tested further.
Adjustable Milling Vice
Skylarc Ref O125195
Expected Auction End Time: 10th October 2021 7:01pm
Adjustable Milling Vice.
Unknown manufacturer.
Brass Jaws each 185mm wide though not mounted evenly, see photos.
Vice opens up to approx 60mm.
Mounting slot spacing approx 260mm apart on centre.
Includes crank handle.
Vice operates smoothly.
26x Assorted Taylor Branded Drill Collets
Skylarc Ref M125193
Expected Auction End Time: 10th October 2021 6:42pm
26x Assorted Taylor Branded Drill Collets.
All units made in England by Taylor.
3x units are approx 38mm diameter shank and 90mm long.
Remaining 23x units are 32mm diameter shank and 70mm long.
Assorted inner bit holding diameters.
Condition varies with each unit. Some show varying surface rusting from storage, a few others show little to no surface rusting. Some appear unused.
See photos for further details on collet design / type.
60x Assorted Milling / Lathe Cutting Tools
Skylarc Ref L125192
Expected Auction End Time: 10th October 2021 6:30pm
60x Assorted Milling / Lathe Cutting Tools.
Unknown manufacturer and age of units.
All units have a mounting shank of 22mm diameter. Lengths vary from approx 65mm to approx 135mm.
Includes wood board display rack approx 630x235x40mm.
Condition - Surface rusting from workshop storage. Many cutting tips appear unused but cannot verify.
See photos for further type and design details.
Hitachi Seiki CNC Lathe with Bar Feeder
Skylarc Ref P129200
Expected Auction End Time: 10th October 2021 7:04pm
Model: Hitachi Seiki HT Hitec-Turn 20 SII
Turning length 380mm
Distance between centers approx 600mm
Swing over bed 380mm
X-axis travel 200mm
X-axis travel 400mm
10 tool turret
6000rpm spindle speed
210mm three jaw chuck
Siecos LY CNC controller
Chip conveyor
5800mm long bar feeder
Some manuals
Machine powers up but bar feeder is not connected and displays an error.
Has been surplus to retirements for several years
Weighs approx 4000kg, buyer will need thier own lifting equipment.
Project Kiwa Vertical Machining Centre
Skylarc Ref D128616
Expected Auction End Time: 10th October 2021 6:27pm
Model: Kiwa Excel-1200
CNC milling machine
X-axis travel 1200mm
Y-axis travel 500mm
X-axis travel 550mm
500mm x 1350mm bed
18 tool magazine
Wide range of tooling in the machine
Fanuc Series O-M CNC controller
BT40 spindle
6000rpm main spindle
7kw main spindle motor
Has a fault with the Z axis
Can't get the spindle to power up spindle
Nice small machine for a serious project
You will need your own lifting equipment for this machine, it will probably need to be skated from it's current location.
To see a video of this machine running:
https://youtu.be/EQwmaRp9Tq8
Hydraulic Machine Vice
Skylarc Ref J125190
Expected Auction End Time: 10th October 2021 8:18pm
Hydraulic Machine Vice.
Unknown manufacturer.
Vice jaw width approx 125mm.
Mounting bolt hole spacing approx 350mm apart on centre.
Adjustable vice and Hydraulic unit spacing.
See photos for further details on unit design.
Unknown if unit is functional. Surface rusting from workshop storage.
Machine Thread Tapper Unit
Skylarc Ref I125189
Expected Auction End Time: 10th October 2021 7:58pm
Machine Thread Tapper Unit.
Unsure manufacturer and model as markings are heavily coated with grime
Overall unit dimensions is approx 100x100x160mm.
Mounting shank approx 30mm diameter.
Centre hole approx 40mm.
See photos for further details on what type of Threading unit this is.
Some deposits of sticky grease on unit. Unsure if unit is complete, see photos.
Machine Thread Tapper Unit
Skylarc Ref H125188
Expected Auction End Time: 10th October 2021 6:48pm
Machine Thread Tapper Unit.
Unknown manufacturer and model.
Overall unit dimensions is approx 82x82x140mm.
Mounting shank approx 25mm diameter.
Centre hole approx 30mm.
See photos for further details on what type of Threading unit this is.
TOS Cylindrical Grinder
Skylarc Ref C128615
Expected Auction End Time: 10th October 2021 9:48pm
Model: TOS 2 UD Cylindrical Grinder
Grinding wheel diameter 350mm
Center height 145mm
Swing 290mm
Approx 600mm between centers max
Power feeds
150mm 6 jaw chuck
Assortment of grinding wheels
Dial gauge
Needs a tidy but a solid machine
To see a video of this machine running:
https://youtu.be/NQm7b2XR2Cc
Machine Thread Tapper Unit
Skylarc Ref G125187
Expected Auction End Time: 10th October 2021 7:16pm
Machine Thread Tapper Unit.
Unknown manufacturer and model.
Overall unit dimensions is approx 63x63x107mm.
Mounting shank approx 30mm diameter.
Centre hole approx 15mm.
See photos for further details on what type of Threading unit this is.
3x Assorted Lathe Live Centres by Ward
Skylarc Ref F125186
Expected Auction End Time: 10th October 2021 9:22pm
3x Assorted Lathe Live Centres by Ward.
All units made in England by Ward.
Two units have 25mm diameter mounting shanks and one unit has 38mm diameter shank.
See photos for rotating end design type on each unit
3x Assorted Lathe Live & Dead Centres
Skylarc Ref E125185
Expected Auction End Time: 10th October 2021 7:40pm
3x Assorted Lathe Live & Dead Centres.
Includes :
- 1x Dead centre with Morse Taper No. 4 shank within a approx 38mm diameter sleeve.
- 1x Live Centre with Cone tip marked with RO/CR and has Morse Taper No. 4 shank within a 38mm diameter sleeve
- 1x Live Centre with flat faced head approx 50mm diameter, with mounting shank approx 30mm diameter.
See photos for further design details for each unit
Landis Machine Thread Cutting Head
Skylarc Ref D125184
Expected Auction End Time: 10th October 2021 8:10pm
Landis Machine Thread Cutting Head.
Head No. 7F01226-1
Made in USA by Landis Machine Co.
Head diameter approx 95mm.
See photos for further design details.
Some surface rust spotting from workshop storage.
Landis Machine Thread Cutting Head
Skylarc Ref C125183
Expected Auction End Time: 10th October 2021 7:26pm
Landis Machine Thread Cutting Head.
Head No. 7FM1736
Made in England by Landis Machine Co.
Head diameter approx 100mm.
See photos for further design details.
Some surface rust spotting from workshop storage.
Lathe Thread Tapper Unit
Skylarc Ref B125182
Expected Auction End Time: 10th October 2021 7:33pm
Lathe Thread Tapper Unit.
Unknown manufacturer and model.
Overall unit dimensions (excluding side handle) is approx 88x88x215mm.
Mounting shank approx 37mm diameter.
Centre hole approx 25mm.
See photos for further details on what type of Threading unit this is.
Lathe Thread Tapper Unit
Skylarc Ref A125181
Expected Auction End Time: 10th October 2021 9:27pm
Lathe Thread Tapper Unit.
Unknown manufacturer and model.
Overall unit dimensions (excluding side handle) is approx 100x100x175mm.
Mounting shank approx 30mm diameter.
Centre hole approx 30mm.
See photos for further details on what type of Threading unit this is.
Machine Thread Tapper Unit
Skylarc Ref Z125180
Expected Auction End Time: 10th October 2021 9:42pm
Machine Thread Tapper Unit.
Unknown manufacturer and model.
Overall unit dimensions (excluding side handle) is approx 100x100x180mm.
Mounting shank approx 30mm diameter.
Centre hole approx 25mm.
See photos for further details on what type of Threading unit this is.
Sylvac Model 25 Digital Display Calibration Indicator Unit
Skylarc Ref W125177
Expected Auction End Time: 10th October 2021 7:53pm
Sylvac Model 25 Digital Display Calibration Indicator Unit.
Made in Switzerland by Sylvac.
Invludes power cord and probe unit.
Age of unit is unknown.
Condition - Unit powers on, not further tested. Exterior casing shows wear from industrial Workshop usage.
Dual Slotted Lathe Turning Tool Holder
Skylarc Ref V125176
Expected Auction End Time: 10th October 2021 9:05pm
Dual Slotted Lathe Turning Tool Holder.
Holder mounting shank approx 40mm diameter, 90mm long.
Total holder dimensions approx 83mm diameter, 165mm long.
Dual turning Tool slots each approx 15mm wide.
Condition - One gripping bolt is missing. Some surface rusting from storage.
2x Lathe Tool Holders
Skylarc Ref U125175
Expected Auction End Time: 10th October 2021 7:08pm
2x Lathe Turning Tool Holders.
Both units are identical dimensions.
Mounting shanks approx 40mm diameter, 125mm long.
Tool mounting groove approx 22mm wide, 17mm deep.
Some light surface rust from workshop storage. Some Tool gripping bolts are missing.
3x Lathe Turning Tool Holders
Skylarc Ref T125174
Expected Auction End Time: 10th October 2021 7:19pm
3x Lathe Turning Tool Holders.
All units are identical dimensions.
Mounting shanks approx 40mm diameter, 125mm long.
Tool mounting groove approx 22mm wide, 17mm deep.
Some light surface rust from workshop storage.
240mm Diameter Lathe Chuck
Skylarc Ref S125173
Expected Auction End Time: 10th October 2021 7:58pm
240mm Diameter Lathe Chuck.
Made in England by Walfred Herbert Ltd.
T-slot jaw type, see photos for further details.
Centre hole 65mm diameter.
Chuck key is missing.
Condition - Jaws will move a short distance then jam, unknown cause. Movement is stiff, may need oiling. Some surface rust from workshop storage.
Coventry Thread Tapper Kit 12DT
Skylarc Ref R125172
Expected Auction End Time: 10th October 2021 6:09pm
Coventry Thread Tapper Kit.
Made in England.
Set model 12DT.
Includes 170x130x115mm Steel case.
Includes assorted Threading teeth sets.
Threader unit mounting shank approx 25mm diameter, 45mm long.
See photos for further details on type details.
355mm Diameter Rotating Mill Table
Skylarc Ref P125170
Expected Auction End Time: 10th October 2021 6:46pm
Rotating Mill Table.
Unknown manufacturer.
355mm diameter table surface.
Total unit dimensions approx 460x580x140mm.
Condirion - Table surface will not rotate when wheel is turned, unit may need servicing/repair. Some surface rusting from workshop storage.
200mm Dia Rotary Milling Table
Skylarc Ref O125169
Expected Auction End Time: 10th October 2021 6:40pm
Rotary Milling Table.
Unknown manufacturer.
200mm diameter tar surface.
Mouting slots spaced approx 250mm apart on centre.
Age of unit is unknown
Unit shows Workshop wear and usage. Table turns a bit stiff, may need some oiling.
Indexing Head
Skylarc Ref U129101
Expected Auction End Time: 10th October 2021 7:09pm
Dividing Head
Unknown manufacturer and model.
Chuck face approx 160mm diameter
Inner centre hole approx 50mm diameter.
Chuck key not included.
Has been disassembled and unsure if complete
Age of unit unknown.
Some surface rusting from workshop storage.
37x Assorted Chuck Collets
Skylarc Ref T129100
Expected Auction End Time: 10th October 2021 8:30pm
37x Assorted Chuck Collets.
Appears to be assorted brands.
36x units have a shank approx 45mm diameter and 110mm in length.
1x unit is 55mm diameter, 110mm in length.
1x unit has a shank of 55mm diameter and max diameter of approx 90mm.
See photos for further details on what specific type of Collets these are.
Condition varies with each unit. Some surface rusting from workshop storage.
3x BT40 Type Tool Holders
Skylarc Ref U128451
Expected Auction End Time: 10th October 2021 8:04pm
3x BT40 Type Tool Holders.
Unable to located a manufacturer or type marking on any unit.
All three units appear to be of the same type, see photos for further details.
Some surface rust spotting on all units.
Project Combination Table Saw and Jointer
Skylarc Ref M125167
Expected Auction End Time: 10th October 2021 6:18pm
Classic kiwi made Tanner combination bench saw and jointer
Tilting table 250mm blade
690mm x 500mm cast iron table
930mm long x 190mm wide jointer/buzzer
Single phase motor (plug cut off)
May not be complete
Parts or project
AW BT40 Tool Holder w/ 13mm Keyless Chuck Attachment
Skylarc Ref Q128447
Expected Auction End Time: 10th October 2021 9:06pm
AW BT40 Tool Holder w/ 13mm Keyless Chuck Attachment.
AW branded tool Holder.
Tool Holder model BT40-JTA6-45.
Includes attached Golden Goose branded 13mm Keyless Drill Chuck.
Some surface rust spotting from storage.
Machine Thread Cutting Head
Skylarc Ref P128446
Expected Auction End Time: 10th October 2021 6:41pm
Machine Thread Cutting Head.
Unable to locate a model number or manufacturer name.
Inner cutter diameter approx 20mm. Outer diameter approx 65mm.
Mounting shank approx 20mm diameter.
See photos for further type design details.
Some surface rust spotting on unit.
Machine Thread Cutting Head
Skylarc Ref O128445
Expected Auction End Time: 10th October 2021 9:58pm
Machine Thread Cutting Head.
Unable to locate a model number or manufacturer name.
Inner cutter diameter approx 20mm. Outer diameter approx 65mm.
Mounting shank approx 25mm diameter.
See photos for further type design details.
Some surface rust spotting on unit.
Machine Thread Cutting Head
Skylarc Ref N128444
Expected Auction End Time: 10th October 2021 6:45pm
Machine Thread Cutting Head.
Unable to locate a model number or manufacturer name.
Inner cutter diameter approx 30mm. Outer diameter approx 86mm.
Mounting shank approx 25mm diameter.
See photos for further type design details.
Some surface rust spotting on unit.
Machine Thread Cutting Head
Skylarc Ref M128443
Expected Auction End Time: 10th October 2021 7:55pm
Machine Thread Cutting Head.
QSG branded.
Unable to locate a model number.
Inner cutter diameter approx 20mm. Outer diameter approx 65mm.
Mounting shank approx 20mm diameter.
See photos for further type design details.
Some surface rust spotting on unit.
Machine Thread Cutting Head
Skylarc Ref L128442
Expected Auction End Time: 10th October 2021 9:07pm
Machine Thread Cutting Head.
Unable to locate a Manufacturer or model number marking on unit.
Head diameter approx 98mm.
See photos for further design details.
Some surface rust spotting from workshop storage.
Landis Machine Thread Cutting Head 7FM-2205
Skylarc Ref K128441
Expected Auction End Time: 10th October 2021 6:18pm
Landis Machine Thread Cutting Head.
Head No. 7FM-2205.
Made in England by Landis Machine Co.
Head diameter approx 95mm.
See photos for further design details.
Some surface rust spotting from workshop storage.
Landis Machine Thread Cutting Head 5DE-106
Skylarc Ref J128440
Expected Auction End Time: 10th October 2021 8:04pm
Landis Machine Thread Cutting Head.
Head No. 5DE-106.
Made in USA by Landis Machine Co.
Head diameter approx 73mm.
See photos for further design details.
Some surface rust spotting from workshop storage. Unit is missing two assembly bolts to keep it together, see photos.
Landis Machine Thread Cutting Head 5DE-222
Skylarc Ref I128439
Expected Auction End Time: 10th October 2021 9:34pm
Landis Machine Thread Cutting Head.
Head No. 5DE-222.
Made in USA by Landis Machine Co.
Head diameter approx 73mm.
See photos for further design details.
Some surface rust spotting from workshop storage.
Landis Machine Thread Cutting Head 5DE-362
Skylarc Ref H128438
Expected Auction End Time: 10th October 2021 8:47pm
Landis Machine Thread Cutting Head.
Head No. 5DE-362.
Made in USA by Landis Machine Co.
Head diameter approx 73mm.
See photos for further design details.
Some surface rust spotting from workshop storage.
4x Assorted Laboratory Glass Beakers
Skylarc Ref A128431
Expected Auction End Time: 10th October 2021 6:22pm
4x Assorted Laboratory Glass Beakers.
Includes:
- 2x Schott Duran 3000mL Beakers.
- 1x Ilmabor TGI 2000mL beaker.
- 1x LabServ 1000mL beaker.
Condition - Unknoen if items are used. Dusty from open box storage.
Assorted Pipe Threading Components
Skylarc Ref Z128430
Expected Auction End Time: 10th October 2021 6:38pm
Assorted Pipe Threading Components.
Five Threading units are Ridgid branded. One unit is another brand though unable to decipher tool markings.
Includes an assortment of Threading teeth.
Note - Its unknown if the assorted Threading teeth are compatible with the included Threading units..
All items show moderate to heavy industrial wear and usage.
See photos for further details on included items.
5x Assorted Vintage G-Clamps
Skylarc Ref X128428
Expected Auction End Time: 10th October 2021 8:52pm
5x Assorted Vintage G-Clamps.
Sizes include:
- 1x 100mm
- 2x 200mm.
- 1x 250mm
- 1x 300mm
Condition - All show heavy wear and usage. One unit has threaded rod tip, all others are missing tips, see photos.
4x Folding Automotive Safety Hazard Triangles
Skylarc Ref U128425
Expected Auction End Time: 10th October 2021 8:45pm
4x Folding Automotive Safety Hazard Triangles.
Each unit is approx 450mm wide, 430mm tall.
Three units have Weighted bases.
One unit has carry case.
Collapsable for storage.
Items are dusty from workshop storage
See photos for further type details.
9x Round Steel Knockout Hole Punch Units by Greenlee & Blackhawk
Skylarc Ref Q128421
Expected Auction End Time: 10th October 2021 6:02pm
9x Round Steel Knockout Hole Punch Units.
Two largest units are Blackhawk branded, models Z1054 and Z1056.
Remaining seven units are Greenlee branded with diameters from 3/4" up to 3".
Includes one incomplete small Blackhawk unit Z1039.
Knockout Hole Cutters are stored in an included steel Enerpak branded case.
Note - Auction includes above mentioned punch units and steel case only, the punch Tool itself is missing and therfore NOT included.
NT50 Tool Holder w/ Indexable Mill Cutter Attachment
Skylarc Ref O128419
Expected Auction End Time: 10th October 2021 9:29pm
NT50 Tool Holder w/ Indexable Mill Cutter Attachment.
Unable to locate a Manufacturer and model mark on either unit.
Cutter approx 120mm diameter.
See photos for further details on Holder and cutter.
3/4" Socket Set by Britool & Proto
Skylarc Ref N128418
Expected Auction End Time: 10th October 2021 6:57pm
3/4" Socket Set by Britool & Proto.
Case and most components are Britool branded, made in UK.
Some sockets are Proto branded, made in USA..
Imperial Sizes, smallest is 1 1/8" and largest is 1 7/8".
Includes 685x260x100mm Steel case.
See photos for further details on Included components.
Older incomplete Set that shows moderate wear and usage.
2x Tapmatic 50X Reversable Tapping Attachments, Faulty
Skylarc Ref L128416
Expected Auction End Time: 10th October 2021 7:47pm
2x Tapmatic 50X Reversable Tapping Attachments.
Borh units are Model 50X
Capacity - #6 to 1/2".
Max RPM 1500.
Made in USA.
Condition - Both units do not spin. One unit is missing its Morse Taper shank, see photos.
Ozito 14.4V Cordless Drill Driver w/ Case, No Batteries
Skylarc Ref G128411
Expected Auction End Time: 10th October 2021 7:32pm
Ozito 14.4V Cordless Drill Driver.
Model No. OZCD144V1BK.
10mm Keyless Chuck.
Uses compatible 14.4V Ozito batteries (batteries NOT included).
Includes plastic case and Charging Cradle unit (power cord for charging cradle is missing).
Bosch 14.4V Cordless Drill Driver w/ Case & 2x Batteries
Skylarc Ref F128410
Expected Auction End Time: 10th October 2021 6:05pm
Bosch 14.4V Cordless Drill Driver.
Model No. PSR 14.4 VE-2
Includes 2x NiCd 14.4V batteries.
Includes plastic case and user manual.
Note - Battery charger is missing so we are unable to chrage and test batteries and Drill.
Mechpro 20V Cordless Impact Wrench, Tool Only
Skylarc Ref A128405
Expected Auction End Time: 10th October 2021 9:27pm
Mechpro 20V Cordless Impact Wrench, Tool Only.
Model No. MP20V9221.
Uses compatible Li-Ion Mechpro 20V batteries.
300Nm max.
0-2800bpm.
Tool only, batteries and charger are NOT included. Tool is untested.
CP Chicago Pneumatic Rotary Rock Hammer Drill CP9
Skylarc Ref Y128403
Expected Auction End Time: 10th October 2021 8:00pm
CP Chicago Pneumatic Rotary Rock Hammer Drill.
Model No. CP9.
Made in UK.
Complete unit is as new, unpackaged by us for photos.
Includes a second bit attachment component that appears to have been removed from another unit. This extra bit attachment component Appears unused but shows marked from storage.
