Skylarc's Brewery Auction
20 Foot Container Refrigeration System
20 Foot Container Refrigeration System.
3 Dorin refrigeration compressors Models HC2200, HC1500, HC1000
3 Grundfos IE2-IE3 circulation pumps
Omron touch screen digital control system
5 x VSD Controllers
Built by AgCool Refrigeration Systems
Three phase
Mounted in standard 20 foot container
Mobile Office or Commercial Market Shop Conversion
Mobile Office or Commercial Traveling Market Shop Conversion.
Appears to be custom constructed.
Age unknown.
Sliding doors on each side.
Removable side window with counter on both interior and exterior sides.
Heavy duty interior carpeted counter with angled back wall. Skylight in peak of ceiling.
Electrical lighting and power outlets built in though appears incomplete.
See photos for further design details.
Unit sitting on pallet, no wheels or trailer frame included
1996 Chevrolet Camaro Z28
1996 Chevrolet Camaro Z28
Right hand drive conversion with cert plate
5.7 litre V8
Automatic transmission
168977 miles on clock
18" alloy wheels with low profile tires
A few minor marks and spider cracks to paint
Leather interior
Rip to drivers seat back
Vents damaged on dash
Starts and drives well
Big V8 American muscle on a budget
To see this car running:
https://youtu.be/f4AuQINyJRo
Large Assemblies of Brewery Piping & Electronic Components
Large Assemblies of Brewery Piping & Electronic Components.
Two 8000mm long Assemblies of Assemblies were previously used in beer production.
Wall Mounted support frames attached to each.
16x Belimo LRU24 ball valve Modulating Rotary actuator units included on Assemblies along with associated electrical hardware.
Includes four other loose Insulated Piping sections, see photos.
See photos for further details on items and components included.
Stainless Steel Double Walled Beer Tank
Stainless Steel Double Walled Beer Tank.
Weldtech Ltd Serial No. 0414-IB-HL.
455x375mm side Hatch with attached door.
Built in interior Piping for cooling contents, see photos.
Double walled water Jacketed body.
Internal volume capacity unknown, rough estimate around 4000L.
See photos for further design details.
Stretch Flex Auger Conveyer, 5-Metre Length
Stretch Flex Auger Conveyer.
Approx 5000mm Auger length from Feed box to end.
Feed box approx 280x210mm.
Auger diameter approx 70mm.
Item was previously used in beer production in moving raw hops grains.
Item shows moderate wear and usage. Rusting to Auger length.
Assorted Good Grade & Other Industrial Flexable Hoses
Assorted Good Grade & Other Industrial Flexable Hoses.
Assorted lengths and widths. Some are cut-off lengths.
Items were previously used in beer production.
A few units have stainless steel fitting attached to ends, see photos.
Condition varies greatly with each unit.
Steel Elevated Stand w/ Assorted Beer Production Controls, Valves, & More
Steel Elevated Stand w/ Assorted Beer Production Controls, Valves, & More.
Elevated platform approx 1520mm above floor.
Platform area approx 2000x1230mm.
2x small Wilden pump filters.
2x APV automotive valves.
2x VSD's.
2x electrical control panels, see photos for details on built in components.
Setup was used previously for beer production.
Stainless Steel Kettle Tank, 3000L Capacity
Stainless Steel Kettle Tank.
Weldtech Serial No. 0414-IB-KE.
3000L Capacity.
Two pad stirrer built in.
Externally steam driven (Steam drive unit not included).
Includes assorted heavy Steel steam piping lengths, see last photo.
Was previously used in beer production.
Stainless Steel Water Jacketed Fermentation Tank
Stainless Steel Water Jacketed Fermentation Tank.
Weldtech Ltd Serial No. 0814-IB-F6
Double walled water jacket sides.
370x460mm oval side Hatch, door is missing.
Approx 3000L capacity.
Was previously used in beer processing.
Large dent near side hatch.
Stainless Steel Water Jacketed Beer Tank
Stainless Steel Water Jacketed Beer Tank.
Weldtech Ltd Serial No. 0414-IB-BB4
Double walled water jacket sides.
355x470mm side Hatch with door.
2800L capacity.
Tank level indicator assembly and pressure gauge assembly are missing.
Was previously used in beer processing.
Stainless Steel Water Jacketed Beer Tank
Stainless Steel Water Jacketed Beer Tank.
Weldtech Ltd Serial No. 0414-IB-BB3
Double walled water jacket sides.
375x470mm side opening (Hatch door is missing).
Was previously used in beer processing.
Condition - Side Hatch door missing. Level indicator and pressure gauge assrmbly is missing.
Stainless Steel Single Walled Pressurised Tank
Stainless Steel Single Walled Pressurised Tank.
Unkmown manufacturer.
100kpa max pressure gauge.
380x540mm oval side entry door.
Capacity unknown.
Condition - Needs interior clean, leftover residue on bottom of interior. Moderate denting to exterior, see photos. Rusty non-stainless support legs.
Heavy Steel Spiral Staircase
Heavy Steel Spiral Staircase.
100mm diameter centre column.
Height from floor to upper platform approx 2700mm.
Each step is approx 700mm wide, excluding bottom two steps which are cut narrower, see photos.
Heavy steel construction.
Some surface rusting on lower components.
See photos for further design details.