DJI Pocket 2 Creator Combo Kit w/ Case & PolarPro Filter Set.
3-Axis stabilized 4K video camera.
Includes camera plus all original Creator Kit Accessories and box
Also includes PloarPro Cinema Series ND filter set with case and original box.
Also includes unbranded carry case with forms to fit Pocket 2 camera and related accessories.
Includes 32Gb Micro SD card.
Condition - Camera appears near new showing few visible minor marks. Camera operates normally. Many small accessories are as new in their original bags.
See the weblink below for further camera specs:
https://www.dji.com/nz/mobile/pocket-2
Water Kettle, Rice Cooker, Mixer, Toaster Kitchen Appliances.
All units are operating normally.
Includes:
- Kensington Hand Mixer, Model HM250, 350W, Includes box and attachments. Condition - Excellent, Appears near new shows very few visible usage marks.
- Red Stamp 2- slice Toaster, Model SRO8046, Condition- Good, Shows typical usage, some toast residue inside.
- Kensington Watef Kettle, Model TWKK250, 1.7L capacity. Condition -Good, Shows generally mild usage.
- National Rice Cooker, Model SR-W06XN. 0.6L, 3 cup capacity. Condition - Average, older unit showing more moderate wear and usage.
Assorted Fans, Heaters, Dehumidifier.
Includes:
- EvantAir 1750-2000W Micathermic Heater, Model MH0222. 710mm length. Condition - Very Good, shows minor dust, marks.
- Red Stamp 1000W oil fin heater, Model No.TWNDB1D-115. Condition - Excellent, shows few minor marks.
- Dehumidifier (unknown manufacturer), Model No.WDH-610HARS. 220W, 10L/D capacity. Condition - Some yellowing to exterior plastic, otherwise shows mild usage.
- 2x 15W and 16W small desk fans. 140mm fan Blade diameter. Condition - Average - Both units show usage wear, dust. Both need power cable plug end repair.
All units above are operating normally.
Assorted Lot of Kitchen Wares, Sauce Pans, Utensils, & More.
Includes:
- 3x Hampton & Mason Stainless Steel sauce Pans in sizes 140mm, 180mm and 200mm.
- 1x 160mm diameter unbranded sauce pan.
- 1x new unused in box 300mm diameter ceramic pizza tray set.
- 1x 240mm diameter strainer.
- 1x bamboo serving spoon.
- silocone spatula and pasta spoon.
- nine assorted measuring cups from 1/4 tsp to 1 cup.
- 2x assorted mugs
- juice strainer
- 4x assorted ceramic small plates.
- 2x assorted ceramic bowls
- utensil tray with assorted knives, forks, spoons, themometer, peeler.
- 270x270mm cooking pan
- 370x330mm baking pan.
- 330x230mm wood cutting board.
Condition varies with each item. Most show minor usage.
Flymo EasiCut 510 Electric Hedge Trimmer.
510mm long cutting bar.
Cuts up to 20mm diameter branches.
500W.
Includes original box.
Condition - Tool shows very minor signs of brief usage. Body appears as new. Blade bar shows minor marks from apparent brief usage. Trimmer operates normally.
Sony 40" LCD Digital Full HD TV Television.
Model No. KDL-40EX400
Manufactured 2010.
Includes remote.
4x HDMI inputs.
1x USB input.
1x PC input.
See photos for further details on input ports.
See the weblink below for further item specs:
https://www.sony.co.nz/electronics/support/televisions-projectors-lcd-tvs/kdl-40ex400/specifications
2004 Ford Falcon XR8 Boss
5.4 litre V8 engine
4 speed automatic transmission
Cruise control
Tow bar
18" alloy wheels
Air conditioning
Electric windows
Electric drivers seat
New warrant of fitness
Bubbling to clear coat in several places
Rip in drivers seat
Cracks in dash cover
Drink holder cover doesn't close
Curbing to mags
Tyres with good tread
Starts and runs well but has electrical gremlins, e.g. occasionally gives an oil pressure warning but oil pressure has been tested and is normal.
Recent mechanical work includes head gasket and computer replacement
Great opportunity to get into a classic Aussie muscle car
This vehicle is part of an insolvency process it's service history is unknown.
To see this car running:
https://youtu.be/uMWOXF5BlC0
Commercial Building Glass Doors and Panels, Used.
Seven separate units in auction.
All units single glazed.
2x glass wall/window units each approx 2050mm long, 2230mm tall.
2x door units each approx 820mm wide, 1930mm tall.
1x corrugated plastic panel window approx 760x1050mm.
1x corrugated plastic window approx 750x525mm.
Condition - All units show heavy grime, dirt, green staining from outdoor storage. Age of units is unknown.
Pallet of Tounge & Groove Panel Boards.
Each board is approx 90mm wide, 10mm thick.
Lengths vary. Approx 240+ boards are approx 1000mm long. Approx another 40+ boards are approx 1400mm in length.. Around 20+ other boards are a variety of other lengths
Condition - Stack shows weathering from apparent outdoor storage. Some boards shoe rot at ends. Some visible boards show borer. Age of boards is unknown.
Single Phase Motor w/ Gearbox Assembly.
Appears to be custom assembled.
Single phase Electric motor.
Small geared box attached.
See photos for further details on design of assembly.
Condition - Very rusty components. Appears to have been stored outside. Power cord is cut off. Heavy grease on Gearbox.
Industrial Belt Conveyor Assembly.
SEW branded motor, Type No.R32 DT71C4, 0.25kW, 3-phase
100mm wide, approx 1010mm long Conveyor belt assembly.
See photos for further design details
Condition - Rusty components and deteriorated belt from apparent outdoor storage. Power cable to motor is cut off. Unknown if assembly is operational
Industrial Belt Conveyor Assembly.
SEW branded motor, Type No.R32 DT71C4, 0.25kW, 3-phase
100mm wide, approx 960mm long Conveyor belt assembly.
See photos for further design details
Condition - Rusty components and deteriorated belt from apparent outdoor storage. Power cable to motor is cut off. Unknown if assembly is operational.
Industrial Press Machine.
Unknown manufacturer or model. Possibly custom built.
Press, excluding its stand, is approx 430x330x720mm.
Hydraulically operated. No Hydraulic Pump included.
See photos for further details on design of unit
Condition - Rusty from apparent outdoor storage. Unknown if unit is operable.
Drill Press, manufacturer and model unknown.
16mm Keyed Chuck, key is missing.
Single phase.
Drill table approx 285x285mm.
Condition - Drill will not power on when plugged in and power button pushed, fault unknown. Belts can ge turned by hand, Motor and drill shafts turn by hand. Drill Press lever functions normally.
DeLonghi Multi-Vac Vacuum Cleaner.
Model No. M-31.
1100W
Vacuum measures approx 330x330x550mm.
Mounted on castors.
Condition - Vacuum powers on and appears to run normally and has suction but has not been tested at length. Cracks in plastic housing, see photos. Some hose attachments are missing.
Cobra 1200psi Electric Pressure Washer.
Model No.CBHPC.
1500W motor.
5.7L per minute.
5m hose length.
See photos for included attachments.
Condition - Powrrs on and sounds normal but not tested at length or with water. Sun faded plastic to body. Items dusty from storage.
17x Assorted Halogen Light Housings.
Includes:
- 14x Eurologht Galacy Uno model EL290.31, black, track light housings. Each approx 130mm in length.
- 3x Hongli recesed Ceiling light housings, model number unknown, each ring approx 85mm diameter.
Condition- Lectover unused old stock. Boxes dusty from storage. Items in boxes are as new. One Hongli unit is missing its box.
3x Assorted Commercial Glass Panels & Doors.
Two units appear to be hinged glass doors, each door approx 800mm wide, 1970mm tall.
Matching glass panel assembly approx 910mm wide, 2000mm tall.
Age of units unknown.
Condition - Items have been stored outdoors for some time as covered with green grime, dirt, weeds, etc. Very rough condition.
Vintage The Driver Inc Electric Band Saw w/ Wood Stand.
Made in USA by Walker-Turner Company Inc.
Age unknown.
Single phase motor.
Condition - Rusty components, very rotten power cord. Can turn belt drive by hand and motor and saw wheels do turn. Saw could use restoration.
Industrial Hanging Light Fixture.
The Light of Technology AD Esprit branded.
Model No TJH6-70A-T.
70W, G12 bulb type (not included).
Single phase power cord attached, see photo
Unit is approx 350mm diameter and 500mm high.
Condition - No bulb so cannot test. Some denting to unit. No light cover.
Whirlpool Sports 6-Sense 10kg Front Loading Washing Machine.
Model No.WFE 1210 CS.
10kg capacity.
Includes some water lines (stored in inner drum).
Condition - Some scratching, wear marks, to body. Dents in front lower panel.. Some tarnishing in chrome door ring. Some yellowing to plastic. Unit powers on but needs water connection to test further.
Assorted Industrial Components, Motor.
Base unit marks with "Reeves, Australia"
300mm diameter drive where assembly.
3-phase electric motor.
2x drive belts.
See photos for further details on type/design of items.
Base and drive wheel units have thick grease coatings.
Assorted Industrial Parts, Components, Fittings, Power Tool Assemblies, & More.
Includes assorted pipe fittings, Filters, Valves, incomplete Bosch angle grinder, Bosch drill with damaged power cord, and other items. See photos for further details on items included.
Condition - All items show moderate to heavy wear, dust, etc.
Air Drill w/ 13mm Keyed Chuck.
Unknown drill manufacturer, model and age.
English made Jacob's Chuck No.33B 13mm Keyed Chuck, key is missing.
Some surface rusting on Chuck. Jaws turn by hand but very stiff, would benefit from lubrication. Air hose attachment nipple is missing.
Custom Desktop Mid Tower Computer.
Processor - Intel Core i7-920 at 2.66GHz.
18Gb RAM, DDR3
ASRock X58 Extreme Motherboard.
Gigabyte Windforce GV-N770OC GeForce GTX 770 graphics with 4Gb RAM.
2x optical disk drives.
NZXT Beta mid-tower case, with original box.
Includes Logitech USB keyboard.
Note - This computer has NO power supply unit installed, nor has any storage drives. No mouse or power cord included.
6x Assorted Household Carpet Mats & Rugs.
Includes the following sizes:
- Light beige carpet rug approx 1480x900mm.
- Dark grey carpet rug approx 1470x890mm.
- Grey/brown carpet rug approx 1770x1190mm.
- small Dark Grey carpet rug approx 1180x600
- small dark brown carpet mat approx 1000x680mm.
- Tabriz branded Turkish style rug approx 1660x1200mm.
Condition - All items show few minor usage marks, very clean for what they are.
Assorted Used Commercial Vehicle Liggt Assemblies.
Assorted brake/turn signal Assemblies, white reversing lights, emergency lights, and more.
Most show moderate to heavy wear. Many are damaged or missing components.
See photos fir further details on items included
3x Matching Wooden Parts or Tooling Storage Pigeon Hole Shelves.
All appear custom built.
Each is approx 830mm wide, 310mm deep, 405mm tall.
Each storage hole is approx 80-85mm wide, 305mm deep, 85-88mm high.
Condition - All show moderate workshop dust, wear. All still sturdy construction. Some front labeling wood straps are broken, see photos.
22x Morse Taper Drills, Imperial & Metric Sizes.
Morse Taper No.2 size shanks.
Includes the sizes:
19 5mm
17.5mm
17mm
41/64" (2x)
23/32"
21/32"
13/16" (6x)
19/32"
25/32"
7/8"
47/64"
9/16"
Two units have no visible size markings.
Condition varies with each unit. All show tip sharpening wear. Most units very short length.
29x Morse Taper Drills, Imperial Sizes.
Morse Taper No.2 size shanks.
Includes the sizes:
45/64" (4x)
47/64" (2x)
43/64" (2x)
11/16" (2x)
19/32" (6x)
13/16"
25/32"
9/16" (2x)
21/32" (2x)
29/32"
55/64"
13/64"
5/8"
Three units have no visible size markings.
Condition varies with each unit. All show tip sharpening wear
15x Morse Taper Drills, Imperial & Metric Sizes.
Morse Taper No.2 size shanks.
Includes the sizes:
20mm
18.5mm
18mm
15mm
25/32" (7x)
11/16"
29/32"
51/64"
One unit has no visible size markings.
Condition varies with each unit. All show tip sharpening wear
15x Morse Taper Drills, Imperial & Metric Sizes.
Morse Taper No.2 size shanks.
Includes the sizes:
21mm
22mm
7/8" (3x)
57/64"
7/8"
15/16" (2x)
49/64"
55/64"
51/64"
13/16"
Two units have no visible size markings.
Condition varies with each unit. All show tip sharpening wear.
16x Morse Taper Drills, Imperial & Metric Sizes.
Morse Taper No.1 size shanks.
Includes the sizes:
14mm
7/16" (7x)
1/2" (2x)
15/32"
13/32" (3x)
17/32"
33/64"
One unit has no visible size markings.
Condition varies with each unit. Most show tip sharpening
10x Morse Taper Drills, Imperial & Metric Sizes.
Morse Taper No.3 and No.4 size shanks.
Includes the sizes:
27.5mm
1 3/8" (2x, both with No.4 shanks)
59/64" (2x)
1 19/64"
1 3/16"
15/16"
1"
One unit with no visible size markings.
Condition varies with each unit. Most show tip sharpening.
10x Morse Taper Drills, Imperial Sizes.
Morse Taper No.3 size shanks.
Includes the sizes:
1 3/16" (3x)
15/16" (2x)
1 1/16"
15/16" (3x)
One unit with no visible size markings.
Condition varies with each unit. Most show tip sharpening, some have twisted shank tips.
4x Philips Commander TBS610 Luminaire Commercial Ceiling Lights.
All units in white finish.
Exposed frame 595x595mm.
Fixture body size approx 560x560mm, depth approx 110mm..
Florescent tube length 550mm (tubes not included).
Includes 4x transparent covers.
Condition - Old unused stock. Two units are clean and appear as new. Two others show varying levels of dust and grime from years of open box storage. Transparent screens also show varying levels of storage dust. Age of lights unknown.
3x Assorted 3-Phase Induction Motors.
- GEC Machines 5.5kW motor, made in NZ. Shaft does not turn.
- Kapak Motor, 0.1hp, shaft turns by hand.
- 7.5kW motor, unable to read manufacturer name. Shaft turns freely by hand.
All motors show moderate wear and usage. One unit has seized shaft. Unknown if motors are operational.
3-Phase Induction Motor w/ Reduction Gear Box.
Brook Motor branded motor, 1.5kW.
Heligear Plus box, model and ratio marks are worn and unreadable.
Items show moderate wear and usage, and rust. Motor fan housing makes grinding sounds when gearbox wheel is turned.
3-Phase Induction motor w/ 2x Brooks Reduction Drives.
Neri branded motor, 0.25kW.
Larger Brooks Drive model FCNDK75, ratio 1-100.
Smalker Brooks drive model ECNDK40, ratio 1-40.
Condition - Items show moderate wear and usage. Some rusty components. Rear fan housing on motor is loose. Unknown if assembly is operable.
Industrial.Vaccum.
Tellus branded tank, capacity unknown, measures approx 660x420x300mm.
Top section has dual Nilfisk type GSD vacuum motors.
Age of unit unknown.
Condition - motors power on but blow dust out through the top of them. Moderate rusting and wear to vacuum body and tank. May need moderate reconditioning.
Vintqge SteelFort LawnMaster 500 Petrol Lawn Mower.
Made in NZ.
Age unknown.
Powered by Brigfs & Stratton 4hp petrol engine.
500mm cutting width
Condition - Heavy rusting and wear to unit from years of outdoor storage. Engine does not run, cause unknown. Pull cord will pull, compression feels weak, cord retraction weak. Would need some serious reconditioning.
Glass & Chrome Bathroom Basin Assembly.
Mayjia branded.
Includes two glass top surfaces each 900mm wide, 560mm deep at bowl opening, 12mm thick.
One matching glass bowl approx 415mm diameter, 150mm high.
Includes assorted chrome support pieces.
Condition - Items appear to be unused ledtover old stock. Boxes show moderate wear from long term storage. No assembly instructions included so unknown if Chrome support frame is complete.
2x Commercial Oil Burner Space Heater Assemblies.
Made by Precision Tool & Die Inc.
Model 4520-00-153-4602.
Unit approx 305mm diameter, 220mm tall.
Condition - Both units are dusty from open storage. Some parts appear used. Missing some components. See photos for further details on condition and included components
Commercial Oil Burner Space Heater Assembly.
Made by Precision Tool & Die Inc.
Model 4520-00-153-4602.
Unit approx 305mm diameter, 220mm tall.
Condition - Older but unused unit, partially unpacked from box for photos only. Some photos of parts are indicative, see our other listing for more unboxed units of this model.
Box exterior shows moderate wear from long term storage.
Vintage Dsoucher Industrial Band Saw w/ Trolley.
Unknown model number.
Saw measures approx 730mm Long, 780mm tall.
Saw is attached to Trolley that measures approx 870x480x840mm.
Single phase ele tric motor with on/off control box built onto Trolley.
Motor powers Saw via belt.
Condition - Motor does, surprisingly, operate when powered and belt turns lower where inside saw No blades installed. Saw and Trolley show significant rusting from apparent outdoor storage. Wheels of Trolley do not turn. Setup needs reconditioning.
Portable Line Borer Assembly.
Lot includes:
Large set of Turning and Drawing Components.
9 Boring Tools (Various lengths and Diameters):
1 x 3505mm x 72mm.
1 x 3990mm x 51mm.
1 x 3514mm x 51mm.
1 x 2902mm x 50mm.
1 x 2096mm x 60mm.
1 x 1660mm x 50mm.
1 x 1305mm x 50mm.
1 x 765mm x 45mm.
1 x 676mm x 50mm.
Plate pulling Tool.
Hydraulic Hoses.
Carrying cases for Draw and turning tools.
Union Graduate Single Phase Wood Lathe.
Single Phase motor, 4 Spindle Speeds (425, 790, 1330, 2250RPM).
Double ended Spindle.
Unit comes with two face plates and two tool holders.
180mm and 210mm Diameter Face Plates.
800mm Length between tailstock and face plate.
2011 Ford Falcon FG written off due to crash damage
Hard impact to the front right side
Cooling system was emptied in the crash and vehicle has not been touched since
Oil in engine
Deregistered
4 litre Ford Barra engine
6 speed ZF6HP26 automatic transmission
Alloy wheels
4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 203mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.
4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 203mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.
4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 203mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.
4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 203mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.
4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 203mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.
4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 203mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.
4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 203mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.
4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 254mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.
4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 254mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.
4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 254mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.
4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 254mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.
4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 254mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.
4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 254mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.
4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 254mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.
4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 254mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.
Beyerdynamic TS-800 Wireless Microphone Transmitter.
Uses 2x AA batteries (not included).
Includes original box.
Auction also Includes a bonus Beyerdynamic branded padded soft case measuring approx 210x120mm as well as a Beyerdynamic MZH-504 microphone clip.
Condition - Transmitter and clip appear as new unused. Soft pouch shows few minor surface marks.
Korg CB-SV1-73 Semi Hard Keyboard Case.
Interior space approx 1140x350x100mm.
Wheels on bottom for rolling case.
Heavy duty padded Canvas with reinforced areas.
Condition - Dust and wear to exterior from long term storage. Interior cleaner but still shows some mild dust.
Rocktron Banshee 2 Amplified Talkbox.
Includes tube, user guide, original box.
Note - Power adapter is missing so unable to test unit.
Condition - Unit shows few minor marks. Talk tube still sealed in manufacturer bag. Original box shows moderate wear and damage from storage, see photos.
Protemp 37Kw Kerosene Forced Air Heater, Faulty.
Model No. PT-125T-KFA.
Condition - When powerd on the heater pre startup functions operate but there is no ignition of fuel to start heating. Specific fault is unknown. Exterior shows workshop wear and usage