Penfold Transmission Closing Down
Huge Lot of Wooded Half Pallets/Slippers
Skylarc Ref Z144998
Expected Auction End Time: 3rd July 2023 6:09pm
Huge lot of wooden frames
Have been used for handling machinery
Steel reinforced ends
300mm x 130mm
Lengths from 1200mm - 1500mm
Located in Hornby
Vendor can potentially assist with delivery in Christchurch.
Mazak CNC Lathe
Skylarc Ref A144999
Expected Auction End Time: 3rd July 2023 9:32pm
Model: Mazak Slant Turn 30 Universal 1500
Approx 250mm swing
8 x tool holders
Live center
Mazitrol T1 controller
Missing hydraulic pump
Missing chip conveyor
Unknown operational condition
You will need your own lifting equipment
Weighs 7 ton
Located off-site in Woolston
Komatsu PC18MR-2 Mini Excavator with Transport Trailer
Skylarc Ref K144347
Expected Auction End Time: 3rd July 2023 6:56pm
Komatsu PC18MR-2 Mini Excavator with Transport Trailer.
Excavator Specifications:
11.2kW/15HP Diesel Engine.
Curb Weight: 1.82Ton.
Overal Size: 2.4m x 3.7m x 1.3m.
Blade Width:1300mm.
Comes with two standard buckets (1 attached) and a trenching bucket.
Hours: 4116
Operates smoothly, service history unknown.
Trailer Specifications:
Year Built: 2000.
Trailer Length: 4570mm.
Trailer Width: 2160mm.
WOF: 02/2022.
REG: 13/12/2020.
Features:
Disc brakes (Unknown if operational).
Built in ramps.
Condition: Average condition surface rusting, dents, and jockey wheel damaged, needs replacing.
Lights untested.
Single Phase Industrial Workshop Power Lead, 7.5m length
Skylarc Ref U144307
Expected Auction End Time: 3rd July 2023 8:07pm
Single Phase Industrial Workshop Power Lead
7.5m length.
Standard 10A single phase plug at male end.
Industrial type single phase plug at female end, see photos.
Cap missing from female end.
Testing tag outdated.
Mecof Flatbed Milling Machine
Skylarc Ref I144320
Expected Auction End Time: 3rd July 2023 8:08pm
Model: Mecof CS 83 Milling Machine
Three phase
Bed dimensions 5400mm x 1260mm
11kW main spindle motor
X axis travel 3500mm
Z axis travel 1700mm
Y axis travel 1000mm
Max load per metre of bed 8 ton
ISO 50 spindle taper
Heidenhain NC controller
Machine is missing spindle drive motor
You will need your own lifting and decommissioning for this machine
Estimated weight 20 ton
Sturdy Workshop Low Table Storage Shelf Bench
Skylarc Ref U143401
Expected Auction End Time: 3rd July 2023 8:52pm
Sturdy Workshop Low Table Storage Shelf Bench.
40x40mm welded angle steel frame.
MDF board shelves and top surface.
Aluminium front shelf for holding Drills or other compatible items.
Note that items seen on a d around bench are NOT included.
Would benefit from a cleanup.
Sturdy Workshop Workbench Cabinet / Drawer Unit
Skylarc Ref Z143406
Expected Auction End Time: 2nd July 2023 8:04pm
Sturdy Workshop Workbench Cabinet / Drawer Unit.
3mm thick steel plate top over MDF board. Top approx 1090mm above floor.
510mm high back panel.
Single large drawer.
Lower 2-door Cabinet.
Well used but very sturdy unit.
Items seen on, nearby, and within unit are not included.
Assorted Precision Gear Cutting Splines & More
Skylarc Ref A143887
Expected Auction End Time: 2nd July 2023 9:53pm
Assorted Precision Gear Cutting Splines & More.
Various sizes and types, each has too much ID markings to list them all in this description, see photos for some samples.
Most are in excellent condition. Two have damaged teeth, see photos
Vintage Wooden Steel Topped Workbench / Cabinet Unit
Skylarc Ref S143830
Expected Auction End Time: 3rd July 2023 8:14pm
Vintage Wooden Steel Topped Workbench / Cabinet Unit.
3mm thick steel plate top.surfaces on cabinet and bench.
Wood and MDF construction.
Both cabinet and Workbench sections are all one unit, they do not detach.
Cabinet section is approx 915mm long, 1075mm high. This has one large top drawer plus a 2-door lower inner cabinet.
Workbench section is approx 2150mm long, 890mm high. This has open lower Shelving.
A 1650mm long upper backside wall board behind Cabinet and a portion of wotkbench for hanging tools etc.
Condition - A old vintage unit that has been well used but is still very sturdy. Would benefit from a cleanup.
Items seen on an within unut are NOT included.
2x Mill Cutters
Skylarc Ref Z143886
Expected Auction End Time: 2nd July 2023 6:12pm
2x Mill Cutters.
Both have no usable ID markings so manufacturers and part numbers are unknown.
O e 95mm diameter Cutter with 63mm diameter Tool Holder mount.
One 55mm diameter, 70mm long Cutter with 63mm diameter Tool Holder mount .
Rusty surfaces from lack of recent use.
Assorted Morse Taper Drill Adapters & More
Skylarc Ref Y143885
Expected Auction End Time: 3rd July 2023 9:43pm
Assorted Morse Taper Drill Adapters & More.
1x Morse Taper No.5 to No.4 Adapter.
1x 16mm straight shank to Morse Taper No.3.
1x Morse Taper No.3 with 140mm long, 12mm diameter shaft.
3x Morse Taper No.4 each with various types of uncommon atrachments, see photos.
Assorted Ground Toolbit Squares
Skylarc Ref U143882
Expected Auction End Time: 3rd July 2023 6:22pm
Assorted Ground Toolbit Squares.
- 2x Bordo Part No.3800-3/8x3
- 3x Dormer K520 1/2x4 TB12
- 4x Dormer ASSAB17
- 2x Sandvik Coromant C45
Most units appear as new unused. A few others have been cut off or a broken, see photos.
6x Sandvik Coromant Indexable Jobber Drills
Skylarc Ref Q143878
Expected Auction End Time: 2nd July 2023 8:16pm
6x Sandvik Coromant Indexable Jobber Drills.
Includes part numbers:
- R411.5-15534, 15.5mm
- R411.5-17532, 17.5mm
- R411.5-16532, 16.5mm (2x units)
- R411.5-13532, 13.5mm
- R411.5-10534, 10.5mm
Condition varies with each unit. One unit has a modified shank.
See our other listings for more of these Drills
3x Assorted Keyless & Keyed Drill Chucks
Skylarc Ref P143877
Expected Auction End Time: 3rd July 2023 6:56pm
3x Assorted Keyless & Keyed Drill Chucks.
Includes:
- LFA branded 13mm Keyless Chuck with Morse Taper No.4 shank stuck into a larger 50mm diameter mounting shank. Condition, Chuck Jaws move smoothly.
- Golden Goose JT6 13mm Keyed Chuck with Morse Taper No.3 Shank. Condition, jaws move smoothly.
- LFA branded 13mm Keyed Chuck with Morse Taper No.4 shank. Condition, jaws move with widely varying amounts of stiffness then looseness, may need servicing.
- One Chuck key compatible with both Keyed Chucks.
3x Assorted BT40 Tool Holders by Nikken and Laip
Skylarc Ref O143876
Expected Auction End Time: 2nd July 2023 9:22pm
3x Assorted BT40 Tool Holders by Nikken and Laip.
Includes:
- Nikken BT40-JTA6-45
- Laip 0285021800
- Nikken BT40 holder with a faulty Albecht 13mm Keyless Chuck. Chuck Jaws do not move.
1989 Mitsubishi FG15 1.45T LPG/Petrol Forklift
Skylarc Ref E144016
Expected Auction End Time: 3rd July 2023 9:44pm
1989 Mitsubishi FG15 1.45T LPG/Petrol Forklift.
Model: FG15 (Note data plate states FG18 but capacity doesn't match).
Rated Capscity: 1450KG @ 4300mm Fork Height.
SE Solid Tires.
4 Cylinder Dual Fuel Petrol/LPG Motor.
Manual Choke.
Unknown Engine Size.
Fork Length: 1220mm.
Fork Width: 125mm.
Max Lift Height: Approximately 3300mm.
3 Stage Container Mast.
Functions: Lift, Tilt - other two levers have no function but can have hydraulic attachments added.
Last Service: 15/03/19 - 2915H.
Hours: 2925H.
Condition: Unit smokes alot when running - could use a full service.
No leaking seals.
Sandvik Coromant BT40 Tool Holder w/ Large Attachment
Skylarc Ref N143875
Expected Auction End Time: 2nd July 2023 8:11pm
Sandvik Coromant BT40 Tool Holder w/ Large Attachment.
Tool Holder Part number 390.55-40 50 030.
A 160mm long 100mm diameter Indexable Cutter Attachment attached. Unable to locate an ID mark on Attachment so brand and model unknown.
5x Sandvik Coromant Varilock Type BT40 Tool Holders + Attachment
Skylarc Ref K143872
Expected Auction End Time: 2nd July 2023 9:59pm
5x Sandvik Coromant Varilock Type BT40 Tool Holders plus attachment.
Includes the following part numbers:
- 390.55-40 50 030 (3x units)
- 390.55-40 63 050
- 344-390S/55-40 50 040
Also Includes the following Varilock attachment:
- 391.03-63 50 080
BT40 Tool Holder w/Attachment
Skylarc Ref J143871
Expected Auction End Time: 3rd July 2023 9:59pm
BT40 Tool Holder w/Attachment.
Unknown manufacturer.
Tool Holder Part No. 344.390S/55-40 50 040
160mm long attachment, unknown part number. See photos for type details. Tooling attachment end is 30mm diameter.
2x Vintage Tapmatic NCR50 Taping Heads
Skylarc Ref G143868
Expected Auction End Time: 2nd July 2023 9:54pm
2x Vintage Tapmatic NCR50 Taping Heads
One has an unknown brand of BT40 Tool Holder attached, the second unit has 25mm diameter mounting shank.
Condition - Both are older models showing rust spotting and wear from years of usage. Uknown if internal mechanisims are functional
2x Vintage Tapmatic NCR50 Taping Head with BT40 Tool Holder
Skylarc Ref F143867
Expected Auction End Time: 2nd July 2023 6:33pm
2x Vintage Tapmatic NCR50 Taping Heads
Both have unknown brand of BT40 Tool Holder attached.
Condition - Both are older models showing rust spotting and wear from years of usage. Uknown if internal mechanisims are functional.
2x Padded Stools
Skylarc Ref E143866
Expected Auction End Time: 2nd July 2023 7:31pm
2x Padded Stools.
30mm diameter hollow metal tube legs finished in black.
Wood board top with thickly padded black vinyl cover.
Rubber capped feet.
Each stool measures approx 330x330x740mn
Stools were used in an industrial workshop environment but are in very good condition showing mainly just finish wear on foot support bars. Padded vinyl seats are excellent condition.
Antique Vintage Wood / Steel Stackable School Chairs
Skylarc Ref D143865
Expected Auction End Time: 3rd July 2023 8:05pm
Antique Vintage Wood / Steel Stackable School Chairs.
Manufacturer and age of chairs is unknown.
8mm thick wood Veneer/ Plywood seats and backs.
Hollow steel tube frame.
Each chair measures approx 390mm seat width, 450mm seat height, 840mm back height at carry handle.
Condition varies with each chair. Wear to wood surfaces from age and usage, though only a few chairs show veneer pealing, chipping etc, see photos. Some rust spotting to metal. Frames seem sturdy. Chairs would make a great restoration project!
Antique Vintage Klingelnberg Gear Gauge Set
Skylarc Ref C143864
Expected Auction End Time: 2nd July 2023 6:10pm
Antique Vintage Klingelnberg Gear Gauge Set.
Made in Germany by Klingelnberg Remscheid.
Age of set is unknown as is its model number.
Wood case is 200x165x95mm.
Unknown what the set is specifically used for. See photos for details on set type and box condition.
Heavy Duty All Steel Workshop Table Trolley
Skylarc Ref H143844
Expected Auction End Time: 2nd July 2023 7:58pm
Heavy Duty All Steel Workshop Table Trolley.
5mm thick steel top plate with 7mm thick MDF sheet overtop of steel.
64x65mm angle steel legs with heavy Duty swivel castors
Total Trolley length including handles 1045mm
Workshop Shelf Trolley
Skylarc Ref E143841
Expected Auction End Time: 3rd July 2023 9:24pm
Workshop Shelf Trolley.
50x50mm angle steel frame.
100mm diameter castors, two are swivel type.
Items seen on Trolley are not included.
Condition- Very dirty surfaces from heavy workshop usage though is very sturdy.
Assorted Packaged and Loose Mill & Lathe Insets Indexes
Skylarc Ref A143862
Expected Auction End Time: 3rd July 2023 6:17pm
Assorted Packaged and Loose Mill & Lathe Insets Indexes.
Most packaged insets are Sandvik Coromant branded along with a few Pramet and Iscar.
Condition varies greatly. Packaged insets appear unused but not verified. Plastic packaging very dirty from Workshop storage. Large pile of loose Inserts show widely varying condition from looking unused to showing varying usage levels.
5x Assorted Indexable Millimg Cutters & More
Skylarc Ref T143856
Expected Auction End Time: 3rd July 2023 7:19pm
5x Assorted Indexable Millimg Cutters & More.
Includes:
- Sandvik Coromant E12-A16-CS-140
- Sandvik Coromant R390-018A16L-11L
- Unknown brand/type, 20mm diameter 100mm long.
- Unknown brand/type, 30mm diameter, 140mm long.
- Unknown brand/type, 32mm diameter 195mm long.
Condition varies greatly with each unit.
3x Assorted Indexable Milling Cutters
Skylarc Ref S143855
Expected Auction End Time: 2nd July 2023 9:24pm
3x Assorted Indexable Milling Cutters.
Includes:
- Sandvik Coromant R262.2.050.
- Sandvik Coromant 220241R/6001
- Iscar Cutter with unreadable ID markings, approx 50mm diameter.
Condition varies with each unit.
4x Assorted Indexable Lathe Turning Tools
Skylarc Ref P143852
Expected Auction End Time: 3rd July 2023 9:57pm
4x Assorted Indexable Lathe Turning Tools.
Includes:
- Kennametal DSKNR-124B INS SN 43, 115mm length.
- Unknown manufacturer, Part No. SVHCR 2525M 22-R2, 150mm length.
- Sandvik Coromant R154.3-54-3 R154.3-2516-15, 150mm length
- Seco Tools PSSNR 2020 12A, Heavily modified shank now at 90mm length.
Pramet Indexable Lathe Parting Tool GFIR 1616 H03
Skylarc Ref O143851
Expected Auction End Time: 2nd July 2023 9:52pm
Pramet Indexable Lathe Parting Tool.
Part No. GFIR 1616 H03.
Aldo includes a case of compatible Pramet Inserts type No. LCMR 031604-F.
Tool shows very light usage. Extra Inserts in case are as new.
Also includes original box.
Welded Steel Workshop Storage Shelving Unit
Skylarc Ref M143849
Expected Auction End Time: 2nd July 2023 6:58pm
Welded Steel Workshop Storage Shelving Unit.
40x40mm welded angle steel frame with MDF shelves.
Items seen on shelves are NOT included.
Very dirty unit but sturdy construction.
Top shelf board is missing.
Workshop Corner Storage Cabinet / Workbench
Skylarc Ref J143846
Expected Auction End Time: 3rd July 2023 8:22pm
Workshop Corner Storage Cabinet / Workbench.
MDF construction with unattached 3mm thick steel plate top surface sheets.
400mm Cabinet depth on each end.
Some surface grime on painted surfaces and rust to steel top plates. Unit still sturdy though.
Vintage All Steel Mobile Workshop Cabinet
Skylarc Ref D143840
Expected Auction End Time: 3rd July 2023 6:52pm
Vintage All Steel Mobile Workshop Cabinet.
3mm plate Steel construction.
Age of cabinet unknown.
Appears custom built.
Mounted on odd looking castors, see photos.
Old well used Cabinet but very sturdy construction. Odd castors roll easily.
Workshop Workbench Cabinet Drawer Unit
Skylarc Ref C143839
Expected Auction End Time: 2nd July 2023 6:43pm
Workshop Workbench Cabinet Drawer Unit.
3mm thick steel plate top that is 1090mm above floor.
Large Drawer.
Two door lower Cabinet.
Note that items seen on and within Unit are NOT included.
Condition - Base appears to have some damage and seems to be supported by pallets see photos. Some repairs may be needed at base. Otherwise Cabinet is generally good condition.
25 Assorted Tapping Collets
Skylarc Ref I144020
Expected Auction End Time: 2nd July 2023 8:37pm
25 Assorted Tapping Collets.
Nikken Branded ZK24, ZK12and ZK12.
All Sizes below: (? indicating unintelligible size indent).
13 x ZK24: 24S. 20S, 24S, 16S, 3/4U, 1/2U, ?, 16S, 1/2U, 22S, 14S, 16S, 14S.
2 x ZK16: ?, 10S.
11 x ZK12: ?, 8S, 8S, 6S, 8S, 4S, 3/16U, 8S, 6S, 5M6U, 1/4U.
All Steel Workshop Table Trolley
Skylarc Ref B143838
Expected Auction End Time: 3rd July 2023 6:29pm
All Steel Workshop Table Trolley.
5mm thick steel plate top.
5mm thick 65x65mm angle steel legs with castors.
Total Trolley length including handles is approx 1040mm.
Well used but very sturdy heavy Duty Trolley.
Workshop Shelf Trolley
Skylarc Ref Z143836
Expected Auction End Time: 2nd July 2023 6:49pm
Workshop Shelf Trolley.
40x40mm angle steel frame.
100mm diameter castors, two are swivel type.
Items seen on Trolley are not included.
Condition- Very dirty surfaces from heavy workshop usage though frame is solid
Workshop Shelf Trolley
Skylarc Ref Y143835
Expected Auction End Time: 3rd July 2023 6:53pm
Workshop Shelf Trolley.
40x40mm angle steel frame.
100mm diameter castors, two are swivel type.
Items seen on Trolley are not included.
Condition- Very dirty surfaces from heavy workshop usage though frame is solid
Workshop Shelf Trolley
Skylarc Ref U143832
Expected Auction End Time: 3rd July 2023 7:04pm
Workshop Shelf Trolley.
40x40mm angle steel frame.
75mm diameter castors, two are swivel type.
Items seen on Trolley are not included.
Condition- Very dirty surfaces from heavy workshop usage. Slight bend to frame.
Vintqge Workshop Workbench
Skylarc Ref Q143828
Expected Auction End Time: 2nd July 2023 9:27pm
Vintqge Workshop Workbench.
Main wotk surface is 3mm thick steel and is 915mm above floor.
Upper backside wall with two 205mm wide shelves. This wall is 750mm high.
Four lower MDF shelves with support for a fifth.
Main workbench frame is of 40x40mm angle steel.
A vintage and well used wotkbench but still very solid. Would benefit from a cleanup.and reconditioning.
Note that items seen on wotkbench are NOT included.
Workshop Shelf Trolley
Skylarc Ref X143834
Expected Auction End Time: 3rd July 2023 8:19pm
Workshop Shelf Trolley.
40x40mm angle steel frame.
100mm diameter castors, two are swivel type.
Items seen on Trolley are not included.
Condition- Very dirty surfaces from heavy workshop usage though frame is solid.
Workshop Shelf Trolley
Skylarc Ref V143833
Expected Auction End Time: 2nd July 2023 6:25pm
Workshop Shelf Trolley.
40x40mm angle steel frame.
100mm diameter castors, two are swivel type.
Items seen on Trolley are not included.
Condition- Very dirty surfaces from heavy workshop usage though frame is good.
Workshop Shelf Trolley
Skylarc Ref T143831
Expected Auction End Time: 3rd July 2023 7:38pm
Workshop Shelf Trolley.
40x40mm angle steel frame.
75mm diameter castors, two are swivel type.
Items seen on Trolley are not included.
Condition- Very dirty surfaces from heavy workshop usage though comstruction feels sturdy.
Heavy Duty Mobile Workshop Shelving Unit
Skylarc Ref R143829
Expected Auction End Time: 3rd July 2023 8:25pm
Heavy Duty Mobile Workshop Shelving Unit.
50x50mm angle steel welded frame.
Thick MDF board shelves with hundreds of holes for holding Tooling, Drills, or other compstible items. Boards can easily be removed and replaced with solid boards if buyer desires.
Shelving unit is mounted on 100mm diameter castors.
Very solid heavy Duty mobile unit.
Note that items seen on shelves are NOT included.
Heavy Duty Workshop Table Workbench
Skylarc Ref P143827
Expected Auction End Time: 2nd July 2023 7:09pm
Heavy Duty Workshop Table Workbench.
5mm thick 50x50mm angle steel frame.
MDF top a bottom surfaces.
Very dirty unit but very solid would benefit from a cleanup.
Note that items seen on table are NOT included.
Heavy Duty Steel Shelving Workbench Unit
Skylarc Ref O143826
Expected Auction End Time: 3rd July 2023 6:52pm
Heavy Duty Steel Shelving Workbench Unit
5mm thick 50x50mm angle steel frame.
3mm thick steel plate top surface.
Lower shelves of MDF board.
Currently four lower shelf boards included with built in supports for buyer to add another four shelves.
Condition is very dirty and grime covered from industrial usage but unit is very solid and would benefit from a reconditioning.
Note that items seen on unit are NOT included.
Small Workshop Workbench
Skylarc Ref N143825
Expected Auction End Time: 2nd July 2023 7:01pm
Small Workshop Workbench.
40x40mm angle steel frame.
MDF surfaces.
Top surface 960mm above floor.
380mm high back wall with 105mm wide shelf.
Well used but sturdy little unit.
Note - Items seen on and around Workbench are NOT included.
Benchtop Steel Toolbox Drawer Unit
Skylarc Ref R143804
Expected Auction End Time: 3rd July 2023 6:12pm
Benchtop Steel Toolbox Drawer Unit.
Unknown manufacturer.
Lockable doors, keys are missing.
6x sliding steel Tool drawers each 50mm deep.
Top open storage shelf above drawers.
Includes any items seen in photos within unit.
Item is dirty from Workshop.usage.
Sandvik Coromant BT40 Tool Holder w/ 2x Varilock Adapters
Skylarc Ref K143822
Expected Auction End Time: 2nd July 2023 8:48pm
Sandvik Coromant BT40 Tool Holder w/ 2x Varilock Adapters.
Tool Holder Part No.390.55-40 50 030
Attached Sandvik Varilock Part No. 391.35-32 50 110M
Also includes a second Varilock unit, Part No. 391.60-01 50 100.
Some surface rust spotting from lack of recent usage.
All Steel Heavy Duty Workbench Table Shelf Unit
Skylarc Ref I143820
Expected Auction End Time: 3rd July 2023 9:01pm
All Steel Heavy Duty Workbench Table Shelf Unit.
10mm thick steel plate top.
3mm thick steel plate bottom shelves.
65x65mm box steel frame.
Very strong and sturdy unit.
Note - Items seen on and within unit are NOT included.
Workshop Storage Cabinet / Shelf Unit
Skylarc Ref H143819
Expected Auction End Time: 2nd July 2023 9:05pm
Workshop Storage Cabinet / Shelf Unit.
MDF and plywood construction.
Lower sliding door cabinet section 950mm tall.
Upper unattached open Shelving section approx 1510x385x760mm.
Well used but solid unit.
Note - Items seen on, within, and around unit are NOT included.
Heavy Duty Workbench
Skylarc Ref F143817
Expected Auction End Time: 2nd July 2023 6:15pm
Heavy Duty Workbench.
3mm thick steel sheet top with MDF board underneath.
5mm thick 50x50mm angle steel frame.
Top work surface approx 1000mm above floor.
605mm high back wall with hooks for hanging items.
Well used but solid Workbench.
Note - Items seen on and around wotkbench are NOT included.
All Steel Workshop Workbench Table Trolley
Skylarc Ref D143815
Expected Auction End Time: 3rd July 2023 7:14pm
All Steel Workshop Workbench Table Trolley.
5mm thick 50x50mm angle steel frame.
3mm thick steel sheet top.
Unattached 1mm thick steel sheet bottom shelf.
Two 80mm swivel and lockable castors wirh two 80mm non-swivel castors.
Workshop Shelf / Tool Holder Trolley
Skylarc Ref C143814
Expected Auction End Time: 2nd July 2023 7:26pm
Workshop Shelf / Tool Holder Trolley.
5mm thick 40x40mm angle steel frame.
100mm diameter swivel castors.
Hooks at one end for hanging items.
Holes in top surface and angled lower board for storing tool holders or other compatible items. Lower board could be made into a normal.flat shelf without much effort.
Well used but sturdy shelf Trolley.
Workshop Tool Holder & Workbench Combo Table
Skylarc Ref B143813
Expected Auction End Time: 2nd July 2023 6:35pm
Workshop Tool Holder & Workbench Combo Table.
50x50mm angle steel frame.
Holes in lower and upper side shelves for storing Tooling holders or other compatible tools or parts, see photos.
Well used but solid unit.
Mori Seiki Horizontal Machining Center
Skylarc Ref L144248
Expected Auction End Time: 2nd July 2023 7:12pm
Model: Mori Seiki SH-50 Horizontal Machining Center
Three phase
15/11 kW main spindle motor
12000 rpm spindle
X axis travel 630mm
Y axis travel 600mm
Z axis travel 600mm
Pallet dimensions 500mm x 500
36 tool carousel
Pallet changer
BT 40 spindle
Fanuc MSC-516 CNC controller
Chip conveyor
Manuals
Manufactured 1994
To see this machine running:
https://youtu.be/Dht09SIHubE
3x Material Support Roller Stands
Skylarc Ref X143809
Expected Auction End Time: 3rd July 2023 7:11pm
3x Material Support Roller Stands.
Includes:
Smallest stand at 500mm tall with 220x50mm roller. Roller a bit stiff but moves smoothly.
Second stand at 500mm tall with 360x60mm Roller. Roller moves smoothly.
Third stand at 630mm tall with 360x60mm Roller. Roller moves but bearings very rough.
All have heavy Steel non-adjustable stands.
Heavy Duty Workbench w/ Vice
Skylarc Ref V143808
Expected Auction End Time: 3rd July 2023 8:55pm
Heavy Duty Workbench w/ Vice.
5mm thick 50x50mm angle steel frame.
Removable 2mm steel plate covering most of top surface with MDF board underneath.
MDF middle shelf board. Lower frame can accommodate another MDF shelf board as well.
705mm tall backside board with built on shelf 750x200mm.
Includes AllTrade Ironman vice with 155mm jaws.
Other items seen on and around Workbench are NOT included.
Heavy Duty Workshop Shelf Trolley
Skylarc Ref T143806
Expected Auction End Time: 3rd July 2023 6:38pm
Heavy Duty Workshop Shelf Trolley.
5mm thick 40x40mm angle steel frame.
Flat top shelf plus three slightly angled lower shelves.
MDF Shelf surfaces.
100mm diameter castors.
Items seen on unit are NOT included.
Sturdy well built unit. MDF shelves show heavy wear.
Industrial Machine Access Stand & Bench
Skylarc Ref Q143803
Expected Auction End Time: 2nd July 2023 7:11pm
Industrial Machine Access Stand & Bench.
Custom built.
65x30mm box steel frame.
Wood board flooring.
Max flooring height 270mm.
Attached parts bench along side, see photos.
Parts seen on Bench are NOT included.
Very dirty and grime covered surfaces but still a very sturdy unit.
Okuma CNC Lathe
Skylarc Ref K144247
Expected Auction End Time: 3rd July 2023 8:58pm
Model: Okuma LC30 CNC Lathe
Dual turret
12 stations upper turret
8 stations lower turret
300mm three jaw chuck
Okuma CNC controller
Manuals
This machine has lost its memory and parameters
Suit spares or controller upgrade
You will need to organise your own lifting equipment for this machine
2x Lathe Indexable Boring Bars
Skylarc Ref P143802
Expected Auction End Time: 3rd July 2023 8:53pm
2x Lathe Indexable Boring Bars.
Both have had shanks cut shorter.
Unknown manufacturer and part number for smaller bar, which measures 92x24x24mm.
Larger bar also unknown manufacturer, with part no. S40V-PCLNR 12, and measures 198mm in length.
4x Assorted Lathe Indexable Turning & Parting Tools
Skylarc Ref O143801
Expected Auction End Time: 2nd July 2023 9:26pm
4x Assorted Lathe Indexable Turning & Parting Tools.
All have had there shanks shortened.
Includes:
- Sandvik Coromant CoroTurn RC DCLNR 2525M 12, 125mm length.
- Sandvik Coromant CoroTurn 107 SVJBR 2525M 16, 155mm length.
- Sandvik Coromant DDJNR 2525M 15, 125mm length.
- Sandvik Coromant CoroCut PP123G20-2525B, 115mm length
Large Assortment of Bar/Rod/Pipe Steel
Skylarc Ref K143722
Expected Auction End Time: 3rd July 2023 7:07pm
Large Assortment of Bar/Rod/Pipe Steel.
6 Bar Steel lengths sizes ranging from: 3030x80x18mm to 6040x60x10mm.
6 Rod Steel Lengths ranging from: 2570x20x20mm to 3800x10x10mm.
2 Steel Pipes sizes ranging from: 2000x40x40mm to 2900x60x60mm.
Mori Seiki CNC Lathe
Skylarc Ref J144246
Expected Auction End Time: 3rd July 2023 6:18pm
Model: Mori Seiki NL2500Y/700 CNC Lathe
Three phase
Swing over bed 923mm
Saying over cross slide 755mm
Max turning diameter 356mm
Max turning length 705mm
X axis travel 260mm
Y axis travel +50mm -50mm
Z axis travel 795mm
Max spindle speed 4000rpm
91mm spindle bore diameter
12 tool turret
Tailstock travel 734mm
18.5kW main spindle motor
Live tool holders vertical and horizontal
Morse taper No.5 tailstock
Bartec Rapidfeed 896 barfeed
250mm three jaw chuck
Manuals
Accessories
Manufactured 2006
Very tidy machine ready for work
You will need your own lifting equipment for loading this machine
To see this machine running:
https://youtu.be/b6oVrtsUBsE
22x Assorted End Mills, Drills, & More
Skylarc Ref X144684
Expected Auction End Time: 3rd July 2023 8:58pm
22x Assorted End Mills, Drills, & More.
Largest unit is 20mm diameter.
See photos for types of mills included.
Also includes a ER11 drill collet chuck 110x16mm in shank body size, with collet nut Wrench.
Sandvik Coromant CAT40 Collet Tool Holder + 10x ER16 Collets
Skylarc Ref U144682
Expected Auction End Time: 3rd July 2023 7:11pm
Sandvik Coromant CAT40 Collet Tool Holder.
Part No. 2338.10150.0
100mm long drill collet shank.
Includes 10x ER16 size Collets.
Note that the collet nut is missing! Buyer will need to source a replacement nut
Assorted Cased & Loose Mill / Lathe Cutter Inserts Indexes
Skylarc Ref T144681
Expected Auction End Time: 2nd July 2023 9:10pm
Assorted Cased & Loose Mill / Lathe Cutter Inserts Indexes.
24x partial cases of indexes, some near full, others with one remaining.
A few hundred loose mixed Inserts are included ad well. Most appear unused but cannot verify.
Cases show workshop storage wear.
7x Small Parts Storage Drawer Units
Skylarc Ref R144679
Expected Auction End Time: 3rd July 2023 8:09pm
7x Small Parts Storage Drawer Units.
All have metal bodies with plastic drawers.
Dimensions of each unit are the following:
- 3x units are 395x165x335mm.
- 3x units are 395x160x265mm.
- 1x unit with large metal Drawer is 395x165x200mm.
All units show heavy wear and grime from Workshop usage. Most drawers are empty.
Workshop Workbench / Storage Cabinet Drawer Unit
Skylarc Ref Q144678
Expected Auction End Time: 3rd July 2023 9:30pm
Workshop Workbench / Storage Cabinet Drawer Unit.
MDF construction.
Top surface approx 1085mm above floor.
Single large Drawer set up for storing long thin tool, Drills, etc.
Lower 2-door storage cabinet.
Condition - Shows typical workshop wear and usage but still a very sturdy unit.
Keyway Broach Guide Bushes & Shims, Large Assortment
Skylarc Ref P144677
Expected Auction End Time: 2nd July 2023 7:27pm
Keyway Broach Guide Bushes & Shims, Large Assortment.
Approx 85+ broach guide bushes in a wide range of diameters and lengths.
Bush diameters up to 85mm.
Dozens of assorted sizes of Keyway Shims included as well.
6-Door Steel Personnel Locker Unit
Skylarc Ref O144676
Expected Auction End Time: 3rd July 2023 6:49pm
6-Door Steel Personnel Locker Unit.
Unknown manufacturer.
Currently being used as a parts storage unit.
Items seen within, on and around unit are NOT included.
Surfaces very dirty, would benefit greatly from a cleanup.
Sturdy Workshop Workbench Cabinet / Drawer Unit
Skylarc Ref N144675
Expected Auction End Time: 2nd July 2023 6:24pm
Sturdy Workshop Workbench Cabinet / Drawer Unit.
3mm thick steel plate top over MDF board. Top approx 1115mm above floor.
365mm high back panel.
Single large drawer.
Lower 2-door Cabinet.
Well used but very sturdy unit.
Items seen within unit are not included.
Workshop Worktable / Storage Unit
Skylarc Ref L144673
Expected Auction End Time: 2nd July 2023 6:41pm
Workshop Worktable / Storage Unit.
40x40mm.angle steel frame.
MDF top and lower surfaces.
Top has holes for storing tool holders or other compatible tools.
Includes unattached plywood shelf/tool holder measuring approx 340x340x320mm, see photos.
Items show heavy industrial usage and wear but are still sturdy units.
Vintage Workshop Workbench
Skylarc Ref K144672
Expected Auction End Time: 2nd July 2023 10:00pm
Vintage Workshop Workbench.
50x50mm angle steel frame.
18mm thick MDF top surface approx 950mm above floor. This top surface has 45mm diameter holes in it for storing tool holders or other compatible tooling.
MDF side walls on right and back sides rising 470mm above work surface.
Lower divided Shelving area.
Note that items seen on, within, and around Workbench are NOT included.
Well used unit bust still very sturdy.
Three Phase Milling Machine
Skylarc Ref H144244
Expected Auction End Time: 3rd July 2023 6:46pm
Model: Jarocinska Fabryka Obrabiarek FWD25U Universal Milling Machine
8.3kW main motor
1250mm x 270mm T slot table
NT30 spindle tapers
Vertical spindle speeds 45 - 2000rpm
Horizontal spindle speeds 32 - 1020rpm
X, Y and Z axis power feed
2 x arbor supports
Slotting attachment for keyways
Made in Poland
Manufactured 1971
Wired for DRO but no display
Machine last used about 10 years ago and has been in storage since
Lathe Dead and Live Centre's w/ Morse Taper No.5 Shanks
Skylarc Ref F144667
Expected Auction End Time: 2nd July 2023 9:31pm
Lathe Dead and Live Centre's.
Morse Taper No.5 Shanks on both units.
Tip of dead centre is ground off, see photos.
Live centre cone is 35mm diameter. Turns smoothly but would benefit from some lubrication.
Rust spotting on surfaces.
Pellegrini Traversa & Pastorino Gear Hobbing Machine
Skylarc Ref Y144235
Expected Auction End Time: 2nd July 2023 8:31pm
Model: Pellegrini Traversa & Pastorino D.500 Gear Hobbing Machine
Three phase
410mm diameter T slot table
Max workpiece diameter approx 300mm
Estimated stroke 100mm
Large box of change gears
Manual
Machine was operating when stored but hasn't been used in many years
No plug
Smallest gear hobber we've ever seen
Workshop Steel Welding Table w/ Vice and 3-Phase Bench Grinder
Skylarc Ref B144663
Expected Auction End Time: 3rd July 2023 7:44pm
Workshop Steel Welding Table w/ Vice and 3-Phase Bench Grinder.
10mm thick sterl plate bench top surface approx 845mm above floor.
915mm high steel side walls on left and rear sides of Workbench.
Includes a small Dawn branded vice with 80mm wide jaws.
Includes older model 3-phase bench Grinder of unknown manufacturer.
Condition - Table shows typical industrial Welding wear and usage, rusty surfaces, etc. Bench Grinder not operating as old and damaged on/off box and power cable need replacing. Eye guards on Grinder are damaged.
Heavy Steel Workshop Storage Rack Shelf
Skylarc Ref Z144661
Expected Auction End Time: 3rd July 2023 6:20pm
Heavy Steel Workshop Storage Rack Shelf.
Made from 200mm wide, 75mm high, 12mm thick Channel.steel lengths welded together into one large super heavy duty shelf.
Vertical.height between shelves is 550mm for upper two and 805mm from floor to first shelf.
All items seen on and around Shelving Unit are NOT included.
Note - This is one complete and very heavy unit so buyer will need to bring appropriate sized trailer/vehicle to collect this item.
Steel Workshop Storage Shelf Table w/ Upper MDF Shelf Addition
Skylarc Ref U144657
Expected Auction End Time: 2nd July 2023 9:48pm
Steel Workshop Storage Shelf Table w/ Upper MDF Shelf Addition.
Two units in auction.
The lower unit is 50x50mm angle steel frame with MDF top surface painted in green. This unit is 2300x500x710mm.
The upper unit is and MDF shelf painted light green. This unit is 2080x230x565mm.
All the junk seen on and around the two above units are not included.
Precision 16-Door Personnel Locker Unit
Skylarc Ref Y144660
Expected Auction End Time: 3rd July 2023 8:27pm
Precision 16-Door Personnel Locker Unit.
Each door is lockable, all keys are missing.
Interior dimensions for each compartment are approx 420x375x400mm.
Dirty and worn surfaces from Workshop usage
2x Precision 2-Drawer File Cabinets
Skylarc Ref V144658
Expected Auction End Time: 3rd July 2023 9:05pm
2x Precision 2-Drawer File Cabinets.
Two units in auction.
Both lockable but keys are missing.
Each measures approx 645x495x710mm.
Condition - Both show heavy workshop office usage and wear. Dents to metal, cracks to plastic handles, finish wear.
Heavy Steel Table w/ 150mm Thick Granite Surface
Skylarc Ref T144656
Expected Auction End Time: 2nd July 2023 6:40pm
Heavy Steel Table w/ 150mm Thick Granite Surface.
Granite top surface approx 1220mm long, 920mm wide 150mm thick.
Also a 15mm thick steel plate top surface measuring 580x930mm.
Heavy steel support frame.
Other items seen on and around table are not included.
Buyer will need appropriate vehicle/ trailer to remove this heavy table.
Eley Metrology Micro-Vertex Mk III Digital Height Gauge
Skylarc Ref S144655
Expected Auction End Time: 3rd July 2023 9:07pm
Eley Metrology Micro-Vertex Mk III Digital Height Gauge.
Includes power supply, Accessory case, and operation manual.
Dusty surfaces. Accessory case is missing most of its accessories and is very dirty inside from open workshop storage, see photos.
Powers on but not further tested.
Xcel-Arc RazorWeld 200 AC/DC Pulse Tig Welder Kit
Skylarc Ref Q144653
Expected Auction End Time: 3rd July 2023 7:57pm
Xcel-Arc RazorWeld 200 AC/DC Pulse Tig Welder Kit.
Includes Welder, Cabling, user guide, regulator canvas bag.
Condition - Welder and cabling in excellent condition showing light usage. Canvas bag exterior showing workshop wear and dirt.
Antique Vintage Heavy Steel Fixture Table
Skylarc Ref P144652
Expected Auction End Time: 2nd July 2023 9:09pm
Antique Vintage Heavy Steel Fixture Table.
Manufacturer and age unknown.
Table top.approx 3370mm long, 1220mm wide.
Support frame appears to be not original.
Peg holes spaced approx 100x140mm apart. Some are damaged, most filled with grime. Some peg holes not in alignment, see last photo with straight steel bar sample.
Dormer Jobber Drill Workshop Storage Display Case w/ Drills
Skylarc Ref N144650
Expected Auction End Time: 3rd July 2023 8:53pm
Dormer Jobber Drill Workshop Storage Display Case.
Case measures 375x200x235mm
Approx 80x Imperial sized Drills included. Drills appear unused though not all inspected to verify.
Case exterior dirty from Workshop exposure
Dormer Jobber Drill Workshop Storage Display Case w/ Drills
Skylarc Ref M144649
Expected Auction End Time: 2nd July 2023 6:27pm
Dormer Jobber Drill Workshop Storage Display Case.
Case measures 375x200x235mm
Approx 100x metric sized Drills included. Drills appear unused though not all inspected to verify.
Case exterior dirty from Workshop exposure.
2x Sandvik Coromant Lathe Parting Tool Holders
Skylarc Ref B144638
Expected Auction End Time: 2nd July 2023 8:36pm
2x Sandvik Coromant Lathe Parting Tool Holders.
One holder with Part No.150.2-2520-25.
Second holder a T-Max Q-Cut model but unable to find a legible ID number.
Includes an Iscar Tang-Grip Parting Tool number TGFH 32-3.
Includes a Sandvik Coromsnt Parting Tool with no legible ID numbers.
All units show workshop usage and wear.
36x Assorted Imperial Size Morse Taper Drills
Skylarc Ref I144645
Expected Auction End Time: 2nd July 2023 8:34pm
36x Assorted Imperial Size Morse Taper Drills.
Shank sizes include No.3 (2x), No.2 (14x), and No.1 (19x).
Also includes 2x non-Morse Taper drills.
Includes 1x reamer.
Sizes from 5/32" to 1⅛".
Condition varies greatly with each drill.
5x Indexable Lathe Turning Tools
Skylarc Ref G144643
Expected Auction End Time: 3rd July 2023 8:01pm
5x Indexable Lathe Turning Tools.
Unknown manufacturers.
Includes part numbers:
- PCLNR 2525M 12, 135mm length
- R166.0FA-2525-16, 125mm length
- MTJNR 2525M 16M1, 105mm length
- PDJNL 2525M 11, 105mm length
- PCLNR 2525M 12, 120mm length with 25x25mm extra steel bar welded to side.
All have had shanks cut shorter.
4x Indexable Lathe Parting Tools
Skylarc Ref F144642
Expected Auction End Time: 2nd July 2023 8:39pm
4x Indexable Lathe Parting Tools.
Includes:
- Sandvik Coromant T-Max Q-Cut LF 151.2-2525-25, 130mm length.
- Sandvik Coromant CoroCut RF123G10-2525B, 130mm length.
- Sandvik Coromant Q-Cut RF151.23-2525-30M1, 115mm length.
- Unknown brand, LF123H25-2525B, 120mm length.
All units have had their shanks shortened.
4x Indexable Lathe Turning Tools
Skylarc Ref E144641
Expected Auction End Time: 3rd July 2023 6:05pm
4x Indexable Lathe Turning Tools.
Unknown manufacturers.
Includes part numbers:
- SCLCR 2525M 12, 120mm length.
- PCLNR 2525M 12 130mm length.
- R166.5FA-2525-16, 120mm length.
- R166.4FG-2525-22, 120mm length.
All units have had their shanks shortened.
3x Indexable Lathe Turning Tools
Skylarc Ref D144640
Expected Auction End Time: 2nd July 2023 7:26pm
3x Indexable Lathe Turning Tools.
Includes:
- Sandvik Coromant CoroThread 266RFA-2525-16, 120mm length.
- Sandvik Coromant CoroTurn RC DCLNR 2525M 12, 125mm length.
- Seco SRDCN 2020K 10, 125mm length.
All units have had their shanks shortened.
Falcon Chevalier Milling Machine
Skylarc Ref L144548
Expected Auction End Time: 3rd July 2023 9:41pm
Model: Falcon Chevalier FM-3VK
Three phase
1270mm x 260mm table
60 - 4000 rpm spindle speeds
R8 spindle taper
127mm spindle travel
Power feed X axis
Mitutoyo KA Counter digital read out
Belt drive spindle
Pneumatic tool change
Work light
To see this machine running:
https://youtu.be/LV2WimPWu7Q
Erlo Gear Head Drill Press
Skylarc Ref O144526
Expected Auction End Time: 3rd July 2023 6:15pm
Model: Erlo TCA-50
Three phase
Forward and reverse
Spindle speeds 45 - 1115 rpm
No.4 morse taper spindle
Feed rates from 0.08 - 0.24
260mm max spindle travel
560mm x 560mm T slot table
Coolant pump
16mm chuck
Seiwa Gear Hobbing Machine
Skylarc Ref L144523
Expected Auction End Time: 3rd July 2023 6:44pm
Model: Seiwa Iron Works MHD-6
Three phase
450mm rotary table
Spindle speeds
70, 100, 130, 160, 200, 240, 280, 320rpm
Max hob diameter 5"
Cabinet of change gears
You will need your own lifting machinery for this machine, approx 4.5 ton
To see this machine running:
https://youtu.be/956It0oRuy0
UMC Gear Hobbing Machine
Skylarc Ref J144521
Expected Auction End Time: 2nd July 2023 6:44pm
Model: UMC FD-500 Spur Gear Hobbing Machine
Three phase
Fistance between part and tool axles
Min 55mm Max 310mm
Table diameter 500mm
Table bore 70mm
Morse taper No.5 tool holder shaft
Max hobber cutter dimensions 180mm dia x 175mm long
Max stroke 100mm
56 - 280 rpm tool holder shaft speed
5.5kW main motor
Cabinet of change gears and arbors
To see this machine running:
https://youtu.be/jzH8ogw_xQU
3x Indexable Lathe Turning Tools
Skylarc Ref C144639
Expected Auction End Time: 3rd July 2023 7:16pm
3x Indexable Lathe Turning Tools.
One unit is marked as Sandvik Coromant CoroTurn 107 with Part No.SVJBR 2525M 16.
Other two units have no visible manufacturer marks but are very similar in design to the Sandvik marked unit. The two units have the following Part numbers:
SVVBN 2525M 16
SVHBR 2525M 16
All units have had their shanks shorted. Lengths are 130mm, 120mm, and 110mm.
38x ER32 Size Drill Collets w/ 4x Holders & More
Skylarc Ref S144630
Expected Auction End Time: 3rd July 2023 9:27pm
38x ER32 Size Drill Collets.
Includes collet stand that holds 20x collets.
4x collet Holders with 40mm diameter 75mm long mounting shanks.
8x collet nuts (4x on Holders 4x loose).
One collet nut Wrench.
Condition varies with each item.
3x Assorted Indexable Milling Cutters
Skylarc Ref Q144628
Expected Auction End Time: 2nd July 2023 7:01pm
3x Assorted Indexable Milling Cutters.
Includes:
- Iscar TangMill F90LN D100-08-32-R-N15
- Iscar F90SD D 63-22-CP12
- Sandvik Coromant Cutter, Part number ID markings worn off, approx 93mm diameter.
5x Indexable Mill Cutters
Skylarc Ref O144626
Expected Auction End Time: 3rd July 2023 9:19pm
5x Indexable Mill Cutters.
Includes:
- Sandvik Coromant R290.90-050022-12M
- Sandvik Coromant 32D3R115A32-SSP12
- Secodex R217.69-2525.3--13A
- Iscar F90SD D50-22-CP12
- 40mm diameter Cutter with no visible ID markings.
Condition varies with each unit.
6x Sandvik Coromant Indexable Jobber Drills
Skylarc Ref M144624
Expected Auction End Time: 2nd July 2023 7:14pm
6x Sandvik Coromant Indexable Jobber Drills.
Includes part numbers:
- R411.5-23532, Dc23.50
- R411.5-22032, Dc22.00
- R411.5-19534, Dc19.00
- R411.5-18532, Dc18.50
- R411.5-18554, Dc18.50
- R411.5-18534, Dc18.50
Condition varies with each unit.
See our other listings for more of these Drills.
5x Long Drills
Skylarc Ref H144619
Expected Auction End Time: 3rd July 2023 6:16pm
5x Long Drills.
Includes:
- Somta 19x400mm drill with Morse Taper No.2 Shank, appears unused.
- Somta 16x400mm drill with Morse Taper No.2 Shank, appears unused though not in original packaging.
- Dormer 10.5x262mm drill, appears unused
- Unmarked drill approx 14x312mm, shows light use.
- Unmarked drill approx 13x390mm, shows mild usage.
16x Assorted End Mills, Corner Rounding, Dovetail, T-Slot Types
Skylarc Ref G144618
Expected Auction End Time: 2nd July 2023 9:58pm
16x Assorted End Mills.
Includes Corner Rounding, Dovetail and T-Slot Types.
Assorted Sizes up to 16mm.
Most are in non-original cases.
Most appear unused but cannot verify. Others show generally mild use.
44x Assorted Milling Bits and Drills
Skylarc Ref E144616
Expected Auction End Time: 2nd July 2023 6:26pm
44x Assorted Milling Bits and Drills.
Brands includes Dormer, Bordo, Somta, Osborn, HGT and others.
Assorted types in metric and Imperial sizes see photos.
Condition varies with each unit. Most are as new unused, a few others show some mild usage. Cases shoe workshop storage wear.
24x Assorted Milling Bits, Drills
Skylarc Ref C144614
Expected Auction End Time: 2nd July 2023 8:39pm
24x Assorted Milling Bits, Drills.
Dormer, Somta, Pramet, HGT and Bordo branded items.
Assorted Sizes up to 20mm for largest.
See photos for various types included.
All appear to be as new unused with cases. Many cases show workshop storage wear.
3x Sandvik Coromant CoroTurn XS Cylindrical Tool Holders w/ 5x Tools
Skylarc Ref B144613
Expected Auction End Time: 3rd July 2023 9:07pm
3x Sandvik Coromant CoroTurn XS Cylindrical Tool Holders.
Includes the Tool Holder Part numbers:
CXS-A16-07
CXS-A16-06
CXS-A16-04
Includes 2x cased tool insetts both are part No.CXS-04T098-05-4220R 1025.
Includes 3x other uncased Tool Inserts, no ID marks on these three Inserts so part numbers unknown.
Condition - Very minor visible usage marks on tool holders, near new condition. Cased inserts appear as new.
Sandvik Coromant Tool Inserts, Assorted Partial Cases
Skylarc Ref X144609
Expected Auction End Time: 3rd July 2023 7:48pm
Sandvik Coromant Tool Inserts.
Assorted Partial Cases of various types of Milling Cutter Inserts. Numbers remaining in each case ranges from full down to just one. Inserts are as new unused, cases show workshop storage wear, grime.
Assorted Milling Inserts
Skylarc Ref Y144610
Expected Auction End Time: 2nd July 2023 7:07pm
Assorted Milling Inserts.
Brands include Sandvik Coromant, Iscar, Pramet, Seco, and others.
Various types in mostly partial cases. Numbers remaining in each case range from near full to just one.
Inserts appear unused, cases show workshop storage wear.
9x Assorted Indexable Milling Cutters
Skylarc Ref R144604
Expected Auction End Time: 2nd July 2023 7:13pm
9x Assorted Indexable Milling Cutters.
Includes:
- Iscar HCM D12-B-L160-C20 (2x units one with shortened shank).
- Iscar Heli2000 HM90 E90AD-D25-2-C24.
- Iscar Heli2000 HM90 E90A-D25-3-C25.
- Pramet 25A2R080A25-SLN12-C.
- Secodex C R217.69-3232.0-13.
- Seco R217.69-3232-0-13
- Cutter with modified shank, missing ID markings, hand measured approx 32mm diameter, 205mm long.
- Cutter with modified shank, missing ID markings, hand measured approx 20mm diameter, 100mm long.
Condition varies greatly with each unit.
7x Indexable Drills
Skylarc Ref O144601
Expected Auction End Time: 3rd July 2023 8:03pm
7x Indexable Drills.
One drill is of unknown manufacturer with Part No.18WCMX 3xD.
Remaining six Drills are all Sandvik Coromant branded with the following part numbers:
R416.2-0135L20-31
R416.2-0170L20-41
R416.2-0230L25-41
R416.2-0240L25-31
880-D1600L20-03
880-D1600L20-04
Condition varies with each drill.
5x Sandvik Coromant Indexable Drills
Skylarc Ref N144600
Expected Auction End Time: 2nd July 2023 8:56pm
5x Sandvik Coromant Indexable Drills.
Includes the following Part numbers:
R416.1-0290-20-05
R416.1-0240-20-05
R416.1-0210-20-05
R416.1-0180-20-05
R416.1-0185-20-03
Condition varies with each drill.
5x Indexable Drills
Skylarc Ref L144198
Expected Auction End Time: 3rd July 2023 8:41pm
5x Indexable Drills.
Includes one drill with no visible ID markings, hand measurements are approx 26mm cutting diameter and 90mm cutting depth.
Remaining four Drills are Sandvik Coromant branded with the following Part numbers:
R416.1-0450-20-03
R416.1-0390-20-02
R416.1-0390-20-05
R416.1-0290-20-05
Condition varies greatly with each drill.
3x Indexable Drills
Skylarc Ref M144199
Expected Auction End Time: 2nd July 2023 6:51pm
3x Indexable Drills.
Unknown manufacturer.
Includes the following part numbers:
- 29WCMX 3xD, 90mm cutting depth 29mm diameter.
- 35WCMX 3xD, 110mm cutting depth, 35mm diameter.
- 39WCMX 3xD, 120mm cutting depth, 39mm diameter.
Butler Three Phase Slotter and Tooling
Skylarc Ref K144547
Expected Auction End Time: 2nd July 2023 7:36pm
Model: Butler 8" Precision Toolroom Slotter
Stroke 203mm
Throat 350mm
510mm diameter table
Cutting speeds 13 - 69 fpm
Huge range of tooling (Trolley not included)
250mm three jaw chuck
310mm three jaw chuck
250mm three jaw chuck
320mm four jaw chuck
Handy sized machine rarely available
To see this machine running:
https://youtu.be/qgsR3T2wSc4
3x Lathe Boring Bars by Sandvik Coromant and Pramet
Skylarc Ref H144194
Expected Auction End Time: 2nd July 2023 7:35pm
3x Lathe Boring Bars by Sandvik Coromant and Pramet.
Includes:
- Sandvik Coromant CoroThread 266, Part No.266LKF-16-16, 200mm length, appears almost new.
- Sandvik Coromant CoroTurn 107, Part No. A20S-STFCR 11, 250mm length, appears almost new.
- Pramet branded bar, Part No. A20S-STFCR 11 6191 02, 250mm length, shows some usage and surdace rust spotting.
Yamazaki Mazak Three Phase Lathe
Skylarc Ref D144540
Expected Auction End Time: 3rd July 2023 8:36pm
Model: Yamazaki Mazak 3.J.I5
Bed length 2200mm
Distance between centers approx 1600mm
Swing over bed approx 560mm
Swing over gap approx 700mm
Swing over cross slide approx 300mm
12 spindle speeds
25rpm - 1500rpm
Metric and imperial thread cutting
330mm three jaw chuck
410mm four jaw chuck
82mm spindle bore
No.4 MT tailstock
Coolant pump
Fixed steady
Newall digital read out
Damaged 510mm faceplate
Overhead sliding chuck guard
Foot brake
2x Floating Reamers w/ Morse Taper No.4 Shanks
Skylarc Ref C144189
Expected Auction End Time: 3rd July 2023 9:48pm
2x Floating Reamers.
Unknown manufacturer and model numbers.
Larger unit is approx 73mm diameter (excluding cutting blades) and smaller unit approx 46mm diameter.
Both have Morse Taper No.4 size Shanks
Scott Three Phase Lathe
Skylarc Ref C144539
Expected Auction End Time: 2nd July 2023 6:32pm
Model: Scott 1640C Lathe
Bed length 1580mm
Distance between centers approx 1000mm
Swing over bed approx 400mm
Swing over gap approx 500mm
Swing over cross slide approx 240mm
16 spindle speeds
33rpm - 2000rpm
Metric and imperial thread cutting
Quick change tool post with 4 tool holders
250mm three jaw chuck
329mm four jaw chuck
400mm faceplate
56mm spindle bore
No.4 MT tailstock
Newall digital read out
Overhead sliding chuck guard
Taper cutter
Fixed steady
250mm removable bed gap
Traveling steady
Coolant pump
5x Lathe Live Centres w/ Morse Taper Type Mounting Shanks
Skylarc Ref Z144186
Expected Auction End Time: 3rd July 2023 7:31pm
5x Lathe Live Centres w/ Morse Taper Type Mounting Shanks.
All are Skoda branded.
Three have No.4 size mounting shanks
Two have No.2 size mounting shanks.
See photos for cone shale designs on each unit.
Condition varies with each unit. Some cones are a bit stiff and may need lubricant.
Albrecht Chuck w/ Sandvik Coromant Varilock Mount & Extension
Skylarc Ref Y144185
Expected Auction End Time: 2nd July 2023 7:32pm
Albrecht 13mm Keyless Chuck w/ Sandvik Coromant Varilock Mount & Extension.
Includes:
Albrecht 13mm Keyless Chuck.
Sandvik Coromant Varilock chuck Mount type 391.30-16 50 030
Sandvik Coromant Varilock 100mm Extension type 391.01-50 50 100
2x 13mm Keyless Drill Chucks
Skylarc Ref X144184
Expected Auction End Time: 3rd July 2023 7:41pm
2x 13mm Keyless Drill Chucks.
One Chuck is made in Germany by Albrecht and has a Morse Taper No.3 mounting shank.
Second chuck has no visible ID marks and no mounting shank attached.
Both have operating jaws but not tested under a load.
Rotating Workshop Drill Storage Rack
Skylarc Ref V144183
Expected Auction End Time: 2nd July 2023 8:49pm
Rotating Workshop Drill Storage Rack.
Heavy steel base with 4x 610mm diameter rotating wood shelves. Three of these shelves have holes for storing Morse Taper type Drills of various sizes and pegs for storing Adapters. Could be used for storing other similar workshop tools or parts as well.
Well used but sturdy unit.
5x 13mm Keyed Drill Chucks w/ Morse Taper Shanks
Skylarc Ref U144182
Expected Auction End Time: 3rd July 2023 9:42pm
5x 13mm Keyed Drill Chucks w/ Morse Taper Shanks.
Three Jacob's Chuck brand, one Rohti and one LFA brand.
Morse Taper shanks in sizes of No.2, No.3, and No.4.
All Chucks missing keys. All jaws move but not tested under load.
2x 16mm Keyed Drill Chucks w/ Morse Taper Shanks
Skylarc Ref T144181
Expected Auction End Time: 2nd July 2023 9:53pm
2x 16mm Keyed Drill Chucks w/ Morse Taper Shanks.
One unit is Made in England by Jacobs Chuck, model 3A, with Morse Taper No.4 shank.
Second unit manufacturer unknown, model 2b, with Morse Taper No.3 Shank.
Both units missing chuck keys.
Some surface rust spotting. Jaws move but not tested under load.
Vintage Steel Stamp Set, 1/4" Size
Skylarc Ref S144180
Expected Auction End Time: 2nd July 2023 7:19pm
Vintage Steel Stamp Set.
Made in England in 1970 by Edward Pryor & Son Ltd
1/4" Size stamps.
Wood case approx 170x150x30mm.
Some stamps are missing, see photos. Wood case shows heavy external wear, both Latches are broken.
13x Assorted Reamers, Adjustable & Standard Varieties
Skylarc Ref Q144178
Expected Auction End Time: 3rd July 2023 7:18pm
13x Assorted Reamers, Adjustable & Standard Varieties.
Metric and Imperial sizes.
Nine Adjustable reamers with sizes from 17-19mm.up to 1 1/32"-1 1/2".
Four non-adjustsble reamers in sizes from 16mm to 24mm.
Condition varies greatly with each item.
5x Morse Taper No.4 Large Diameter Reamers
Skylarc Ref N144175
Expected Auction End Time: 3rd July 2023 9:12pm
5x Morse Taper No.4 Large Diameter Reamers.
Sizes include:
32mm
35mm
Plus three with no legible sizes markings, hand measured to be approx 35mm, 37mm, and 39mm.
Condition varies with each reamer. One has a modified shank.
4x Morse Taper No.4 Large Diameter Reamers
Skylarc Ref M144174
Expected Auction End Time: 2nd July 2023 6:16pm
4x Morse Taper No.4 Large Diameter Reamers.
Sizes include:
40mm
45mm
Plus two others with no legible size markings, hand measured to be approx 40mm and 38mm diameter.
Condition varies with each reamer.
37x Morse Taper Drill Shank Adapters
Skylarc Ref I144170
Expected Auction End Time: 3rd July 2023 7:20pm
37x Morse Taper Drill Shank Adapters.
Includes the following varieties:
- 2x No.2 to No.1
- 5x No.3 to No.2
- 1x No.3 to No.4
- 5x No.4 to No.1
- 10x No.4 to No.2
- 8x No.4 to No.3
- 1x No.4 to No.5
- 4x No.5 to No.3
- 1x No.5 to No.4
Condition varies greatly with each adapter.
Zayer NC Milling Machine
Skylarc Ref Z144536
Expected Auction End Time: 3rd July 2023 6:04pm
Model: Zayer 1700 AF3
Fixed Bench Milling Machine
X axis travel 1400mm
Y axis travel 650mm
Z axis travel 650mm
1700mm x 515mm table
HEIDENHAIN TNC 150 Control unit
1800rpm spindle
ISO 50 spindle taper
3000kg table capacity
Machine runs but needs Y axis stop positions looked at.
Difficult to get to it's home position without overrunning cutoff position.
You will need your own lifting equipment to load this machine weight approx 10 ton
To see this machine running:
https://youtu.be/PRzGxQ81lbQ
4x Assorted CAT50 Type Mill Tool Holders
Skylarc Ref R144154
Expected Auction End Time: 3rd July 2023 8:09pm
4x Assorted CAT50 Type Mill Tool Holders.
All have no visible ID markings so manufacturers and model numbers unknown.
All appear to be older units.
Largest unit has broken off bit stuck in bottom.
Unit with Cutter attached has modified shank.
Most have surface rusting
8x Assorted Modified Lathe Boring Bars
Skylarc Ref P144152
Expected Auction End Time: 2nd July 2023 9:41pm
8x Assorted Modified Lathe Boring Bars.
Includes:
- Unknown brand, type R 166.4KF-20F22
- Sandvik Coromant type R579.0C 202013-11
- Sandvik Coromsnt CoroTurn 107 type A20S-STFCR 11
- Iscar type GHIR-16-16-2
- Unknown brand type R166.0KF-16-1625-11B
- Unknown brand, type S16R-STFCR 11
- Sandvik Coromant CoroTurn 107, type A12M-STFCR 09-R
- Sandvik Coromant type R154.0KF-16-1220-1B
All have had shanks cut shorter with some having modified widths as well. Lengths from approx 110mm to 180mm. Widths from approx 12mm to 20mm.
Cincinnati Tool Cutter Grinder
Skylarc Ref T144531
Expected Auction End Time: 3rd July 2023 6:16pm
Model: Cincinnati No.2 Cutter Grinder
Three phase
X axis travel 400mm
Distance between centres 540mm
Max workpiece diameter 240mm
360 degrees wheel and workpiece rotation
Assorted wheels
Workpiece rotation motor
Vice
Some accessories
4x Assorted Lathe Boring Bars
Skylarc Ref M144149
Expected Auction End Time: 3rd July 2023 9:09pm
4x Assorted Lathe Boring Bars.
Includes:
- Unknown brand, type No.S25T-RTFNR 16-W, size 260x24x24mm
- Unknown brand, type No.S25T-STFCR 16-M, size 210x24x24mm
- Sandvik Coromant, type number incomplete as Tool has been cut, partial number is S32U-SDU... Tool size 205x30x30mm.
- Unknown brand and type tool, Size 160x32x32mm
5x Assorted Lathe Boring Bars, 12mm to 15mm Sizes
Skylarc Ref L144148
Expected Auction End Time: 3rd July 2023 7:14pm
5x Assorted Lathe Boring Bars, 12mm to 15mm Sizes.
Includes:
- Unknown brand type No.E16R-STFCR 11-R, with 205mm length.
- Unknown brand type No. R154.4KF-16F16, with 205mm length.
- Sandvik Coromant CoroTurn 107 type No.A16R-SOUCR 07-EX, with length of 215mm.
- Sandvik Coromant CoroTurn 107 type No. E12Q-STFCR 09-R, with length of 185mm.
- Ifanger type No.TRG-3x5-R-K0B, with 200mm length.
5x Assorted Lathe Boring Bars, 18mm to 20mm Sizes
Skylarc Ref K144147
Expected Auction End Time: 3rd July 2023 7:26pm
5x Assorted Lathe Boring Bars, 18mm to 20mm Sizes.
Includes:
- Sandvik Coromant CoroTurn 107 type No.A20S-STFCR 11, with 250mm length.
- Sandvik Coromant bar type No. 570-3 2022C, 200mm length, with cutting head type 570-SVQCR-20-11-E.
- Unknown brand, type No. S20S-STFCR 11, with 250mm length.
- Unknown brand, type No. R 166.4KF-20F16, with 250mm length.
- Unknown brand, type No. R 166.0KF-20-22, with 190mm length.
4x Assorted Lathe Boring Bars, 28x28mm Size
Skylarc Ref J144146
Expected Auction End Time: 2nd July 2023 9:01pm
4x Assorted Lathe Boring Bars, 28x28mm Size.
Includes the following:
- Sandvik Coromant CoroTurn RC type A32T-DTFNR 16, with 225mm length.
- Unknown brand, type No. SI CTLHOR-10143 D1M, with 220mm length.
- Unknown brand, type No.S32U-PTFNR 16-W, with 280mm length.
- Unknown brand, type No.S32U-CTFPR 15, with 355mm length.
3x Assorted Lathe Boring Bars, 36x36mm Size
Skylarc Ref I144145
Expected Auction End Time: 2nd July 2023 6:53pm
3x Assorted Lathe Boring Bars, 36x36mm Size.
Includes:
- Sandvik Coromant CoroTurn RC type No. A40T-DCLNR 12 with 300mm length.
- Unknown manufacturer bar with type No. S40V-PDUNR 15, with 280mm length.
- Sandvik Coromant bar cut down to 225mm length and removing most of its ID number details in the process.
3x Assorted Indexable Lathe Turnimg Tools, 25x25mm Size
Skylarc Ref F144142
Expected Auction End Time: 3rd July 2023 7:23pm
3x Assorted Indexable Lathe Turnimg Tools, 25x25mm Size.
Includes:
- Kennametal NRR-163D INS NU-3
- Pramet SER 2525 M16
- Unknown brand with Part No. PDJNR 2525M 15
Condition varies with each unit.
4x Sandvik Coromant Lathe Turning Tools, 25x25mm Size
Skylarc Ref D144140
Expected Auction End Time: 2nd July 2023 6:13pm
4x Sandvik Coromant Lathe Turning Tools, 25x25mm Size.
Includes the following types:
- CoroThread 266 part No.266RFG-2525-22
- CoroTurn RC part No. DCLNL 2525M 12
- T-Max U Lock part No. L 166.5FA-2525-16
- T-Max U Lock part No R 166.4FG-2525-16
Condition varies with each unit.
CAT50 Type Tool Holder NT50-ER40-65 w/ Attachments
Skylarc Ref X144134
Expected Auction End Time: 2nd July 2023 9:21pm
CAT50 Type Tool Holder NT50-ER40-65 w/ Attachments.
Unknown tool holder manufacturer.
ER40 size collet chuck.
110mm long unmarked extension with unmarked 100mm diameter Cutter attached, see photos.
2x CAT50 Type Tool Holders w/ Morse Taper Bases
Skylarc Ref U144132
Expected Auction End Time: 2nd July 2023 10:00pm
2x CAT50 Type Tool Holders w/ Morse Taper Bases.
No legible ID markings on either tool holder.
First holder has a Morse Taper No.5 size base.
Second holder has a Morse Taper No.3 base with a 31.5mm drill attached.
2x CAT50 Type Tool Holders w/ Varilock Style Attachment, + 1x Mill Cutter
Skylarc Ref R144129
Expected Auction End Time: 2nd July 2023 6:08pm
2x CAT50 Type Tool Holders w/ Varilock Style Attachment, + 1x Mill Cutter.
Includes:
- Kojex type No.NT50-FMA27-45M tool holder with 60mm diameter Varilock style base.
- Unknown brand Tool Holder with type No. 267-344 with 40mm diameter Varilock style base. Includes attached Sandvik Coromant Milling Cutter type R290.90-063Q22-12M
Erlo Gear Head Drill Press
Skylarc Ref N144525
Expected Auction End Time: 2nd July 2023 8:24pm
Model: Erlo TCA-50
Three phase
Forward and reverse
Spindle speeds 45 - 1115 rpm
No.4 morse taper spindle
Feed rates from 0.08 - 0.24
260mm max spindle travel
560mm x 560mm T slot table
Coolant pump
13mm keyless chuck
Lorenz Gear Hobber
Skylarc Ref M144524
Expected Auction End Time: 2nd July 2023 8:28pm
Model: Lorenz Modul 12
Three phase
800mm table diameter
Largest diameter gear approx 1200mm
Largest spur gear diameter 480mm
18 cutting speeds
Cabinet of change gears
Arbors
Metal work stand
Manufactured 1957
You will need your own lifting equipment to load this machine approx 8 ton
To see this machine running:
https://youtu.be/Mip77q07RCE
Sykes Vertical Gear Generating Machine
Skylarc Ref H144519
Expected Auction End Time: 2nd July 2023 6:28pm
Model: Sykes V.10 Vertical Gear Generating Machine
Three phase
2 1/4" stroke
8 speeds
250mm rotary table
Rack attachment
Change gears
Manual
To see this machine running:
https://youtu.be/O21VPEiUzMU
MWM Automatic Thread Grinder
Skylarc Ref G144518
Expected Auction End Time: 3rd July 2023 6:45pm
Model: MWM BFI 400x1000 Automatic Thread Grinder
Three phase
Milling length 1000mm
Height of centers over bed 200mm
Max of work to be milled 200mm
Max diameter of work over bed 400mm
Internal thread milling to 175mm diameter
5 x cutter speeds 55, 80, 118, 170, 250 rpm
3.5 HP motor
5x Assorted BT40 Type Tool Holders
Skylarc Ref C144114
Expected Auction End Time: 3rd July 2023 8:37pm
5x Assorted BT40 Type Tool Holders.
One of unknown manufacturer with model number BT40-Z12-90
One Syic branded holder, unreadable model number.
Remaining three holders have no readable ID markings. See photos for further type details
Some have rusting from lack of recent usage.
Jones & Lamson Automatic Thread Grinder
Skylarc Ref F144517
Expected Auction End Time: 3rd July 2023 9:40pm
Model: Jones & Lamson TG 636 Automatic Thread Grinder
Three phase
Max diameter of work 20' wheel 6 1/2", 16" wheel 7 1/2"
Max diameter swing over table 7 1/2"
Max length between centers 36"
Work spindle speeds 36
6 - 150 rpm
Multiple threads single, double, triple, quadruple, sextuple Several new wheels
Metric thread drive otherwise imperial
Machine runs but speeds up and slows down
Sandvik Coromant BT40 Tool Holder W/ Varilock Attachments
Skylarc Ref Y144110
Expected Auction End Time: 3rd July 2023 7:38pm
Sandvik Coromant BT40 Tool Holder W/ Varilock Attachments.
Includes tool holder 390.55-40 50 030
Varilock attachment 391.15-25 50 090
Includes attached Cutter.
Some surface rust from lack of recent usage
Jones & Lamson Automatic Thread Grinder
Skylarc Ref C144514
Expected Auction End Time: 2nd July 2023 7:03pm
Model: Jones & Lamson TG 636 Automatic Thread Grinder
Three phase
Max diameter of work 20' wheel 6 1/2", 16" wheel 7 1/2"
Max diameter swing over table 7 1/2"
Max length between centers 36"
Work spindle speeds 36
6 - 150 rpm
Multiple threads single, double, triple, quadruple, sextuple Several new wheels
Driving dogs
Wide range of change gears
Fellows Gear Shaper
Skylarc Ref R144504
Expected Auction End Time: 3rd July 2023 9:15pm
Model: Fellows 6A Type Gear Shaper
5" stroke
400mm table diameter
Modified to increase height
Spare mounting plate
Manual
Wide range of gears
Great for internal splines and shaping
To see this machine running:
https://youtu.be/8C2vDxuzshU
Reishauer Automatic Gear Grinding Machine
Skylarc Ref Q144503
Expected Auction End Time: 3rd July 2023 7:50pm
Model: Reishauer AZA
Three phase
Min root diameter 10mm
Max tip diameter 330mm
Max slide stroke 180mm
Min clamping length 145mm
Max clamping length 420mm
Max workpiece weight 60kg
Min number of teeth 12
Max number of teeth 260
Cabinet of gears and accessories
Large number of grinding wheels
Wheel balance
Large number if arbors
Manuals and documentation
Manufactured 1982
You will need your own lifting equipment for loading this machine, approx 5 ton
To see this machine running:
https://youtu.be/jkxyhu_5w3A
Tap & Die Set
Skylarc Ref P144427
Expected Auction End Time: 3rd July 2023 9:02pm
Originally this was a 110pc Metric M2 ~ M18 coarse & fine thread. Much of the original parts appear to be there however the set will likely be missing some parts and include parts by a different manufacturer.
Taps shown in photo won't be in their correct locations.
Sandvik Coromant BT40 Tool Holder w/ Pramet Mill Cutter
Skylarc Ref U143982
Expected Auction End Time: 2nd July 2023 7:37pm
Sandvik Coromant BT40 Tool Holder 392.5505-40
Includes attached 90mm diameter Pramet Milling Cutter 80A06R-S450E06Z-C.
Cutter in excellent condition. Tool Holder shows more usage.
Sandvik Coromant BT40 Tool Holder 390.55-40 50 030 w/ Extensions
Skylarc Ref R143979
Expected Auction End Time: 3rd July 2023 9:45pm
Sandvik Coromant BT40 Tool Holder 390.55-40 50 030
Includes the following attachments:
Sandvik Coromant 391.01-50 50 100
Sandvik Coromant Varilock 391.01-50 50 060
Sandvik Coromant Varilock 391.05-22 50 020
Some surface rust spotting from lack of recent usage.
Sandvik Coromant BT40 Tool Holder 390.55-40 63 050 w/ Attachments
Skylarc Ref Q143978
Expected Auction End Time: 3rd July 2023 7:59pm
Sandvik Coromant BT40 Tool Holder 390.55-40 63 050
Includes the following attachments:
Sandvik Coromant Varilock 391.01S/12-63 63 040
Sandvik Coromant Varilock 391.15-25 63 075
Includes attached Cutter.
Sandvik Coromant BT40 Tool Holder 390.55-40 50 030 w/ Attachments
Skylarc Ref P143977
Expected Auction End Time: 3rd July 2023 9:40pm
Sandvik Coromant BT40 Tool Holder 390.55-40 50 030
Includes the following attachments:
Sandvik Coromant 391.01-50 50 060
Sandvik Coromant 391.05-50 50 020
Iscar Cutter F90SD D 63-22-CP12
Sandvik Coromant BT40 Tool Holder 390.55-40 50 030 w/ Attachments
Skylarc Ref O143976
Expected Auction End Time: 2nd July 2023 6:49pm
Sandvik Coromant BT40 Tool Holder 390.55-40 50 030
Includes the following attachments:
Sandvik Coromant 391.01-50 50 060
Sandvik Coromant 391.05-50 50 020
Iscar Cutter F90SD D 63-22-CP12
Scott Three Phase Lathe
Skylarc Ref Z144511
Expected Auction End Time: 2nd July 2023 8:34pm
Model: Scott 6263 Lathe
Three phase
1000mm between centers
200mm swing over bed
240mm removable gap
Approx 250mm swing over gap
Spindle speeds 45 - 1800rpm
Metric and imperial thread cutting
38mm spindle bore
Foot brake
160mm three jaw chuck
No 3 morse taper tailstock
300mm faceplate
Fixed steady
Traveling steady
To see this machine running:
https://youtu.be/g-HWzcKvZuU
Dormac Internal Grinder
Skylarc Ref S144505
Expected Auction End Time: 3rd July 2023 6:51pm
Model: Dormac FMB-250 Internal Grinder
Three phase
650mm distance between grinding and work spindles
200mm swing over bed
Grinding spindle speeds 7000 - 25000rpm
Table traverse 450mm
Face grinding attachment (5600rpm)
6 x chuck speeds
80 - 800rpm
Hydraulic dresser
Steady
200mm three jaw chuck
Manual
To see this machine running:
https://youtu.be/7AFrsBJVy0k
4x Assorted Vintage Precision Tool Cases
Skylarc Ref L143948
Expected Auction End Time: 2nd July 2023 8:32pm
4x Assorted Vintage Precision Tool Cases.
Three cases are wood with the following dimensions:
345x155x30mm
270x125x25mm
195x100x32mm
Aldo includes one Moore & Wright branded case 205x105x25mm.
Some cases have some parts still in them. Most are empty.
Condition varies with each unit.
Age of cases is unknown.
4x Mitutoyo Inside Micrometers
Skylarc Ref D143940
Expected Auction End Time: 3rd July 2023 7:57pm
4x Mitutoyo Inside Micrometers.
Model.numbers unknown.
Longest attachment rod is 250mm in length
One set in vintage wood case and three loose micrometers with assorted rods in plastic case.
See photos for further details on included items.
Assorted Outside & Disk Micrometers
Skylarc Ref B143938
Expected Auction End Time: 2nd July 2023 6:46pm
Assorted Outside & Disk Micrometers.
Labeling is worn so unable to verify manufacturers and models/sizes
Two disk varieties and two standard outside types.
One has a damaged wood case.
Condition varies with each unit.
Shigya Seiki Cylindrical Grinder
Skylarc Ref O144501
Expected Auction End Time: 3rd July 2023 6:33pm
Model: Shigya Seiki G-32 (GAU-32-100)
X axis travel 400mm
Distance between centres approx 1000mm
Max workpiece diameter 150mm
Automatic traverse X axis and wheel plunge
Max wheel diameter 405mm
Max wheel head stroke 160mm
No.4 morse taper spindle
Manufactured 1980
Coolant pump
Hydraulic power pack
Marpos measuring head and panel
4 grinding wheels
Wheel balance kit
Internal grinding mounting
Chuck 150mm
Dogs
Manual
Steady
To see this machine running:
https://youtu.be/ySHrb3Z2dpo
Proth Surface Grinder
Skylarc Ref N144500
Expected Auction End Time: 2nd July 2023 7:35pm
Model: Proth PSGS-2550AH Surface Grinder
3 phase
Hydraulic surface grinder
Grinding table length 1620mm
Magnetic chuck 510mm x 260mm
320mm wheel diameter
Manufactured 1993
Coolant tank
Hydraulic pump
Very tidy machine straight out of work
To see this machine running:
https://youtu.be/e6TVskvMAmE
Mitutoyo 3-Point Internal Micrometer 368-741, 62-75mm w/ Setting Ring
Skylarc Ref X143909
Expected Auction End Time: 2nd July 2023 9:14pm
Mitutoyo 3-Point Internal Micrometer.
Model No.368-741.
Range 62-75mm.
Includes setting ring though it's ID marks are illegible so it's set size is unknown.
Wood case missing part of Latch.
Euroboor Eco 32 Mag Drill
Skylarc Ref P144402
Expected Auction End Time: 3rd July 2023 6:25pm
Annular cutting Ø 12 - 32 mm
Twist drilling Ø 1 - 13 mm
Countersinking Ø 10 - 40 mm
Length 320 mm
Width 210 mm
Height 370 - 512 mm
Stroke 150 mm
Weight 11 kg*
Magnet (l x w x h) 160 x 80 x 42 mm
Magnetic force 1,500 kg
Motor power 1,000 W
Total power 1,050 W
Speed (no load) 775 rpm
Speed (load 1,000 W) 440 rpm
