Skylarc's Dunedin Surplus Machinery Auction

Cigweld Transmig 330SE MIG Welder

Skylarc Ref N145896

Expected Auction End Time: 13th August 2023 6:29pm

Cigweld Transmig 330SE MIG Welder.
Includes Cigweld Transmig 2Rse wire Feeder.
3-Phase.

Ozark Six Shooter Stud Welder

Skylarc Ref O145897

Expected Auction End Time: 13th August 2023 6:04pm

Ozark Six Shooter Stud Welder.
Part No.017063
Welder measures approx 640x310x310mm.
Max stud diameter 3/8" (9.5mm)
Includes assorted cabling and wood case.

20-Foot Shipping Container

Skylarc Ref P145898

Expected Auction End Time: 13th August 2023 9:46pm

20-Foot Shipping Container.
Made in Korea by Jindo Corporation.
Model No.JSD CC85 OC
Age of container is unknown.
Other standard container ID plates are missing.
Condition - Holes rusted through in roof and Sides, see photos.

You will need your own lifting equipment to load this container

John Heine 2.4 Metre Flywheel Press Brake

Skylarc Ref Q145899

Expected Auction End Time: 13th August 2023 7:16pm

2400mm press width
Three phase
Manufactured in Australia by John Heine & Son

Large Radial Arm Drill Press

Skylarc Ref R145900

Expected Auction End Time: 13th August 2023 7:42pm

Large Radial Arm Drill Press.
H. Cegielski Poznan branded.
Type No.Wr-50/2
Manufactured in 1969.
Table size approx. 1300x910x505mm
19 spindle speeds 30 - 1700rpm
18 feed speeds .0059 - .0472
You will need your own lifting equipment to load this machine

Small Hydraulic Pump Assembly

Skylarc Ref D145002

Expected Auction End Time: 13th August 2023 9:36pm

Small Hydraulic Pump Assembly.
Manufactured by JM Davie, Dunedin.
3-phase.
Tank size approx 370x260x180mm.

7x Hydraulic Cylinders

Skylarc Ref E145003

Expected Auction End Time: 13th August 2023 8:43pm

7x Hydraulic Cylinders.
Unknown manufacturer and model.
All appear to be of same design.
Total Cylinder length approx 1195mm, diameter approx 90mm.
Shaft approx 45mm diameter.

4x Hydraulic Cylinders by Victor

Skylarc Ref F145004

Expected Auction End Time: 13th August 2023 8:05pm

4x Hydraulic Cylinders by Victor.
All appear to be of same design
Total length when closed approx 1170mm.
Cylinder length approx 590mm, diameter approx 85mm.
Shaft approx 38mm diameter.

Asquith Rotating Head Radial Arm Drill

Skylarc Ref B146222

Expected Auction End Time: 13th August 2023 8:49pm

Model; Asquith P36700
Manufactured 1976
No.5 morse taper spindle
12 spindle speeds
22-500rpm
4kW main motor
Head rotates on both axis
Great for side drilling on heavy machinery
On wheels
Includes 920mm x 760mm x 510mm T-slot block
Very rarely available machine

Eriez Magnetics Hi-Vi Vibratory Equipment HS20

Skylarc Ref G145005

Expected Auction End Time: 13th August 2023 8:14pm

Eriez Magnetics Hi-Vi Vibratory Equipment.
Model No. HS20.
Style No. 20
Single Phase
Shows some modification.

H.W.M. Heavy Duty Finger Folder

Skylarc Ref C146223

Expected Auction End Time: 13th August 2023 9:09pm

Heavy duty finger folder
2500mm folding width
Unknown capacity

4x Trailer Adjustable Support Stands

Skylarc Ref H145006

Expected Auction End Time: 13th August 2023 8:25pm

4x Trailer Adjustable Support Stands.
Adjustable length from approx 420mm to approx 620mm.
Mounting bolt hole spacing approx 200mm apart.

Rolls of 6mm Diameter Stainless Steel Wire

Skylarc Ref I145007

Expected Auction End Time: 13th August 2023 7:28pm

Rolls of 6mm Diameter Stainless Steel Wire.
Lengths unknown.

Rexroth Industrial 3-Phase Hydraulic Pump Assembly

Skylarc Ref J145008

Expected Auction End Time: 13th August 2023 8:16pm

Rexroth Industrial 3-Phase Hydraulic Pump Assembly.
Assrmbly model number unknown.
Tank size approx 1220x750x600mm.

Industrial 3-Phase Hydraulic Pump Assembly

Skylarc Ref K145009

Expected Auction End Time: 13th August 2023 9:48pm

Industrial 3-Phase Hydraulic Pump Assembly.
Unknown manufacturer.
Tank measures approx 770x620x490mm.

Industrial 3-Phase Hydraulic Pump Assembly

Skylarc Ref L145010

Expected Auction End Time: 13th August 2023 8:19pm

Industrial 3-Phase Hydraulic Pump Assembly.
Sperry Vickers branded, model number and specs unknown.
Tank size approx 480x400x480mm.

14x Assorted Dairy Milk Pipe Assemblies

Skylarc Ref M145011

Expected Auction End Time: 13th August 2023 8:21pm

14x Assorted Dairy Milk Pipe Assemblies.
Unsure as to their specific name or usage.
70mm diameter Galvanised Steel.
Each is approx 1000mm in height.
See photos for further design/type details.

Sunderland Gear Generator

Skylarc Ref N145012

Expected Auction End Time: 13th August 2023 7:28pm

Sunderland Gear Planer
Model type 19
Made in England by J. Parkinson & Son, Shipley.
Approx 1400mm max gear diameter
Minimum diameter at root of teeth 45mm
Spindle capacity 660mm
Spindle bore 102mm
Arbor diameter 75mm
Main drive motor 10hp
Huge range of tooling (tool trays not included)
Lifting bars can be used for loading but are not included in the sale

Miller Trailered Welder Generator

Skylarc Ref D146224

Expected Auction End Time: 13th August 2023 6:37pm

Model: Miller Bobcat 225D Welder Generator
CC/CV AC/DC Welder
8000 watt single phase generator
Duetz MD 151 D 5710 diesel engine
Mounted on single axle trailer
Toolboxes with range of welding accessories
REG to 23/09/2023
Wof expired 20/05/2023

4x Large Diameter Milling Face Cutters + Wood Case of Milling Accessories

Skylarc Ref O145013

Expected Auction End Time: 13th August 2023 7:38pm

4x Large Diameter Milling Face Cutters + Wood Case of Other Large Milling Accessories.
Unable to find ledgible ID markings with all the rust on the mill face Cutters. Diameter of each are approx 400mm, 350mm, 290mm, and 180mm.
Wood case measures approx 815x520x190mm.
See photos for details on contents within the Case.

Nederman CNC Filtermist Unit

Skylarc Ref E146225

Expected Auction End Time: 13th August 2023 6:36pm

Model: Nederman Nom 11 with HEPA
Manufactured 2007
CNC Filtermist Unit
Full specs:
https://www.nederman.com/en/pws-catalog/p/filter-nom/nom-11

Sciaky Rapid 50 KVA Spot Welder

Skylarc Ref P145014

Expected Auction End Time: 13th August 2023 8:22pm

Sciaky Rapid 50 KVA Spot Welder.
3-phase.
Water cooling
50 kVa
900mm long arm.
Includes control box which is not from this machine

Stankoimport Surface Grinder

Skylarc Ref Q145015

Expected Auction End Time: 13th August 2023 7:54pm

Model: Stanko 3r71M Surface Grinder
Three phase
Magnetic table dimensions 600mm x 200mm
Approx 230mm wheel diameter
Overall grinding bay length 1750mm
Filtermist Unit

Luxcut High Speed Cutting Saw AS350

Skylarc Ref R145016

Expected Auction End Time: 13th August 2023 8:50pm

Luxcut High Speed Cutting Saw.
Model No. AS350.
350mm Blade diameter.
3-phase

Stanko Radial Arm Drill Press

Skylarc Ref S145017

Expected Auction End Time: 13th August 2023 8:00pm

Model: Stankoimport 2M55
Table approx 795x630x495mm
Morse taper 5 spindle
21 spindle speeds
20 - 2000rpm
12 feed speeds
0.025 - 2.5
800mm x 630mm x 500mm T slot table
Three phase

Exacta 30/50 Industrial Press

Skylarc Ref T145018

Expected Auction End Time: 13th August 2023 6:18pm

Model: Exacta 30/50 Industrial Press.
Made by A.T. Waters Ltd, Frankton.
30 ton capacity

DYE 8' Metal Cutting Guillotine

Skylarc Ref F146226

Expected Auction End Time: 13th August 2023 7:46pm

Model: DYE 8'X14GMS
2400mm cutting width
14 gauge capacity
Back gauge
Foot operated
Three phase

John Heine Reclining Press

Skylarc Ref U145019

Expected Auction End Time: 13th August 2023 8:54pm

Industrial Press.
Made in Australia by John Heine & Son Ltd.
Model 55a
3-phase
Unknown capacity but thought to be approx 30 ton

Downpipe Edge Roller

Skylarc Ref V145020

Expected Auction End Time: 13th August 2023 9:24pm

Downpipe edge roller
Capacity up to 2480mm.

Colchester Master 600 Lathe

Skylarc Ref W145021

Expected Auction End Time: 13th August 2023 6:30pm

Model: Colchester Master 600
Three phase metal lathe
1400mm long bed
1000mm between centres
Removable gap 135mm long
260mm swing over gap
160mm swing over bed
42mnmm spindle bore
16 spindle speeds
30rpm - 2500rpm
Metric and imperial thread cutting
Quick change tool post
5 tool holders
Coolant pump
200mm diameter 3 jaw chuck
250mm diameter 4 jaw chuck
5hp main motor

Colchester Mascot 1600 Lathe

Skylarc Ref X145022

Expected Auction End Time: 13th August 2023 6:12pm

Model: Colchester Mascot 1600
Distance between centres 2000mm
Swing over bed 430mm
Swing over cross slide 265mm
Swing over gap 710mm
76mm spindle bore
Three phase
16 spindle speeds
20 - 1600 rpm
350mm removable gap
Quick change toolpost
Three jaw 320mm chuck
Four jaw 400mm chuck
Fixed steady
Travelling steady
Some tooling

Swaging Jenny

Skylarc Ref Y145023

Expected Auction End Time: 13th August 2023 8:51pm

Swaging Jenny
Been converted to single phase electric

TOS Tool Cutter Grinder

Skylarc Ref Z145024

Expected Auction End Time: 13th August 2023 6:53pm

Model: TOS BM102B Tool Cutter Grinder
Three phase
Total bed length 100mm
Approx 660mm between centres
Includes wide range of accessories

Stanko 3-Phase Shaper

Skylarc Ref A145025

Expected Auction End Time: 13th August 2023 6:57pm

Model: Stankoimport Model No. 7B35
500mm x 360mm T slot table
3 phase 2.2kW motor
Manufactured in 1972
Includes 250mm machine vice

Progre Gear Head Drill Press

Skylarc Ref C145027

Expected Auction End Time: 13th August 2023 9:12pm

Model: Progre 4E 3-Phase Drill Press.
Made in England by Victoria Machine Tool Co Ltd
9 spindle speeds
73 - 1065 rpm
Approx 230mm spindle travel
Spindle comes off end of travel at bottom of stroke
535mm diameter table.
Table hight adjustable from approx 500mm to approx 950mm

Single Phase Lockformer

Skylarc Ref D145028

Expected Auction End Time: 13th August 2023 6:26pm

Lockformer
Unknown manufacturer and model
Single phase

Shorte 20G Lockformer

Skylarc Ref E145029

Expected Auction End Time: 13th August 2023 7:39pm

Model: Shorte Engineering 20S. LF.
Assorted change wheels
Three phase 20 amp plug

Cigweld 400 Mig Welder

Skylarc Ref F145030

Expected Auction End Time: 13th August 2023 6:01pm

Cigweld 400 Mig Welder.
No cables included.
Indicator gauge covers missing.

Single Phase Electric Spot Welder by Pacific

Skylarc Ref B145650

Expected Auction End Time: 13th August 2023 6:21pm

Single Phase Electric Spot Welder by Pacific.
Model No. R
Serial No. 155
2 KVA
230V
Welding arms approx 300mm long.

Hansen Engineering 100 Ton Press

Skylarc Ref G146227

Expected Auction End Time: 13th August 2023 8:30pm

Model: HECO 100 ton hydraulic press
90mm diameter ram
Manual operation
Adjustable height platform
1000mm between uprights
10/100 ton selectable

NZIG Electrical Spot Welder

Skylarc Ref A145649

Expected Auction End Time: 13th August 2023 7:36pm

NZIG Electrical Spot Welder.
5kVa
Serial No. 778
3-phase.
Welding arm length approx 450mm.

Three Phase Linisher

Skylarc Ref C145651

Expected Auction End Time: 13th August 2023 9:40pm

Model: Parken 27-1-2
800mm exposed belt surface
Exit catcher
Cast iron foot

28x Assorted SDS and Standard Drill Bits

Skylarc Ref D145652

Expected Auction End Time: 13th August 2023 9:18pm

28x Assorted SDS and Standard Drill Bits.
Lengths vary up to 500mm.
Diameters vary up to 38mm.
Condition varies greatly with each unit. Most show heacy usage, rust.

Assorted Vintage Thread Dies

Skylarc Ref E145653

Expected Auction End Time: 13th August 2023 9:40pm

Assorted Vintage Thread Dies.
Outer diameters up to 70mm.
Very dirty units, many with surface rust as well.

Single Phase Bench Grinder

Skylarc Ref F145654

Expected Auction End Time: 13th August 2023 6:03pm

Single Phase Bench Grinder.
Worn ID label so make and model unknown.
Accommodates wheels up to 200mm Diameter.
Eye safety guards are missing.
Note - Auction includes Grinder only, though if buyer wishes to also take the stand the Grinder is attached to they will need to bring an angle Grinder to cut off the stand from the bar it is welded to, see photos.

Mobile Steel Workshop Drill Bit Rack & Cabinet

Skylarc Ref G145655

Expected Auction End Time: 13th August 2023 9:24pm

Mobile Steel Workshop Drill Bit Rack & Cabinet.
Heavy Steel construction.
Assorted Drill Bit Racks welded to top.
Well used but strong unit.

Vintage Wood Workbench w/ Vice

Skylarc Ref H145656

Expected Auction End Time: 13th August 2023 9:58pm

Vintage Wood Workbench w/ Vice.
Unknown wood type.
Record No. 4 vice attached.
Items seen on Workbench are NOT included.

2x Twist Knot Cup.Brushes by Dixbro

Skylarc Ref I145657

Expected Auction End Time: 13th August 2023 9:08pm

2x Twist Knot Cup.Brushes by Dixbro.
Both units are Part No. TC100 14x2 26G
Each is as new unused in different type of packaging.

33x Assorted Holesaws by Starrett, Bahco, & Blue-Mox

Skylarc Ref J145658

Expected Auction End Time: 13th August 2023 6:39pm

33x Assorted Holesaws by Starrett, Bahco, & Blue-Mox.
Diameters up to 152mm.
Condition varies greatly with each unit.

Grinding Wheel Radius Attachment Set

Skylarc Ref K145659

Expected Auction End Time: 13th August 2023 9:06pm

Grinding Wheel Radius Attachment Set.
Unknown manufacturer.
A x B = 5.25 x 32.09
Wood case 325x210x45mm.

Vintage Brass "Mammoth" Heavy Duty Heating Torch

Skylarc Ref L145660

Expected Auction End Time: 13th August 2023 7:05pm

Vintage Brass "Mammoth" Heavy Duty Heating Torch.
Made in NZ by New Zealand Industrial Gases Limited.
Main Torch body approx 1065mm in length.
Wood case 1135x140x70mm.
Torch in very good condition. Case exterior in average condition showing workshop storage wear.

Evolution Rage Corded 185mm TCT Circular Saw

Skylarc Ref G145031

Expected Auction End Time: 13th August 2023 8:03pm

Evolution Rage Corded 185mm TCT Circular Saw.
New in sealed unopened manufacturer box.

Welding Stand

Skylarc Ref H145032

Expected Auction End Time: 13th August 2023 7:24pm

Donald Ross and Partners
Modular welding stand
530mm x 530mm cross shaped work mount
Bench bracket
4 x brackets

40+ Assorted Reamers, Drills & More

Skylarc Ref M145661

Expected Auction End Time: 13th August 2023 8:03pm

40+ Assorted Reamers, Drills & More.
Assorted sizes up to 34mm
Mounting shanks from No.1 to No.5 Morse Taper as well.as some straight shanks of various diameters.
Condition varies greatly with each unit.

Evolution Rage Corded 185mm TCT Circular Saw

Skylarc Ref N145662

Expected Auction End Time: 13th August 2023 8:09pm

Evolution Rage Corded 185mm TCT Circular Saw.
New in sealed unopened manufacturer box.

Vintage Moore & Wright Imperial Scale Micrometer

Skylarc Ref O145663

Expected Auction End Time: 13th August 2023 7:11pm

Vintage Moore & Wright Imperial Scale Micrometer.
Model No.996
3" to 4" range.
Micrometer very good condition. Wood case exterior shows wear.

Vintage or Antique Wood Cabinet

Skylarc Ref P145664

Expected Auction End Time: 13th August 2023 9:40pm

Vintage or Antique Wood Cabinet.
Age and wood type unknown.
Note - items seen within cabinet are NOT included.

Hamilton Perry Pallet Shelving

Skylarc Ref H146228

Expected Auction End Time: 13th August 2023 9:50pm

Pallet racking style shelves
One bay
2 uprights
6 shelves
Contents not included

4x Assorted Large Diameter Thread Die Holders

Skylarc Ref Q145665

Expected Auction End Time: 13th August 2023 8:06pm

4x Assorted Large Diameter Thread Die Holders.
Unknown manufacturers
Largest unit at 1.5"
Condition varies with each unit.

Heavy Duty Steel Workshop Trolley

Skylarc Ref I146229

Expected Auction End Time: 13th August 2023 8:01pm

Heavy duty plate steel construction
900mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Heavy Duty Steel Workshop Trolley

Skylarc Ref J146230

Expected Auction End Time: 13th August 2023 9:04pm

Heavy duty plate steel construction
900mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Heavy Duty Steel Workshop Trolley

Skylarc Ref I145033

Expected Auction End Time: 13th August 2023 9:51pm

Heavy duty plate steel construction
1000mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Heavy Duty Steel Workshop Trolley

Skylarc Ref J145034

Expected Auction End Time: 13th August 2023 9:09pm

Heavy duty plate steel construction
900mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Workbench Table w/ Vice

Skylarc Ref K145035

Expected Auction End Time: 13th August 2023 7:26pm

Workbench Table w/ Vice.
50mm thivk wood board top.
60mm diameter steel tube legs.
Record No.4 vice with 120mm wide jaws.
Note - Itens seen on and under table are NOT included.

Vintage Wood Workbench

Skylarc Ref L145036

Expected Auction End Time: 13th August 2023 6:16pm

Vintage Wood Workbench.
Wood board top surface 935mm above floor.
470mm high MDF back wall.
Lower storage shelf.
Note - Items seen on and within Workbench are NOT included.

Kennametal Indexable Mill Cutter w/ Inserts

Skylarc Ref M145037

Expected Auction End Time: 13th August 2023 8:08pm

Kennametal Indexable Mill Cutter.
Type No.C2 NG16, 4.3 1220R200, 20mm diameter, 120mm length.
Includes two partial cases of spare Inserts.

Ridgid 4-Wheel Pipe Cutter 42A

Skylarc Ref N145038

Expected Auction End Time: 13th August 2023 7:12pm

Ridgid 4-Wheel Pipe Cutter.
Model No. 42A.
Made in USA

Pallet Racking

Skylarc Ref K146231

Expected Auction End Time: 13th August 2023 6:29pm

2 x uprights 2300mm tall x 650mm wide
8 x crossbeams 2670mm long

Pallet Racking

Skylarc Ref L146232

Expected Auction End Time: 13th August 2023 8:22pm

2 x uprights 2300mm tall x 650mm wide
8 x crossbeams 2670mm long

4-Jaw Lathe Chuck, 310mm Diameter

Skylarc Ref O145039

Expected Auction End Time: 13th August 2023 6:08pm

4-Jaw Lathe Chuck,.
Unknown manufacturer.
310mm outside Diameter.
90mm diameter centre hole.
15mm mounting bolt size (bolts not included) spaced approx 110mm apart on centre.
Chuck Jaw adjustment key is missing.

Avdel Air Pneumatic Rivet Gun

Skylarc Ref Q145041

Expected Auction End Time: 13th August 2023 7:44pm

Avdel Air Pneumatic Rivet Gun.
Model No.7552

2 x Large Back to Back Shelving Units

Skylarc Ref M146233

Expected Auction End Time: 13th August 2023 8:50pm

Novalok Works brand shelving
10 bays total
12 x 1630mm x 600mm uprights
1370mm long shelves
MDF board shelves
2 seperate units (sold together)
Buyer to dismantle
Contents not included

Evolution Rage Corded 185mm TCT Circular Saw

Skylarc Ref R145042

Expected Auction End Time: 13th August 2023 6:56pm

Evolution Rage Corded 185mm TCT Circular Saw.
New in sealed unopened manufacturer box. Some moisture box damage see photos.

Heavy Duty Steel Workshop Trolley

Skylarc Ref N146234

Expected Auction End Time: 13th August 2023 8:16pm

Heavy duty plate steel construction
1010mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Heavy Duty Steel Workshop Trolley

Skylarc Ref O146235

Expected Auction End Time: 13th August 2023 6:57pm

Heavy duty plate steel construction
900mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Heavy Duty Steel Workshop Trolley

Skylarc Ref P146236

Expected Auction End Time: 13th August 2023 6:04pm

Heavy duty plate steel construction
900mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Vintage Hitachi Vorded Belt Sander SB-110

Skylarc Ref T145044

Expected Auction End Time: 13th August 2023 8:00pm

Vintage Hitachi Vorded Belt Sander.
Model No. SB-110.
110x620mm belt size.
Some damage to cord, see photos.
Operates but shows heavy wear and usage.
No dust catcher bag.

Heavy Duty Steel Workshop Trolley

Skylarc Ref Q146237

Expected Auction End Time: 13th August 2023 9:53pm

Heavy duty plate steel construction
900mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Heavy Duty Steel Workshop Trolley

Skylarc Ref R146238

Expected Auction End Time: 13th August 2023 7:07pm

Heavy duty plate steel construction
900mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Heavy Duty Steel Workshop Trolley

Skylarc Ref S146239

Expected Auction End Time: 13th August 2023 6:50pm

Heavy duty plate steel construction
900mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Heavy Duty Steel Workshop Trolley

Skylarc Ref T146240

Expected Auction End Time: 13th August 2023 7:38pm

Heavy duty plate steel construction
900mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Heavy Duty Steel Workshop Trolley

Skylarc Ref U146241

Expected Auction End Time: 13th August 2023 6:27pm

Heavy duty plate steel construction
1010mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Heavy Duty Steel Workshop Trolley

Skylarc Ref V146242

Expected Auction End Time: 13th August 2023 9:26pm

Heavy duty plate steel construction
900mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Heavy Duty Steel Workshop Trolley

Skylarc Ref W146243

Expected Auction End Time: 13th August 2023 6:23pm

Heavy duty plate steel construction
900mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Heavy Duty Steel Workshop Trolley

Skylarc Ref X146244

Expected Auction End Time: 13th August 2023 8:24pm

Heavy duty plate steel construction
900mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Hitachi Corded 3/4" Drive Impact Wrench WR22SA

Skylarc Ref U145045

Expected Auction End Time: 13th August 2023 6:14pm

Hitachi Corded 3/4" Drive Impact Wrench.
Model No. WR22SA.
Some damage to cord, see photos.

Heavy Duty Steel Workshop Trolley

Skylarc Ref Y146245

Expected Auction End Time: 13th August 2023 8:38pm

Heavy duty plate steel construction
900mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Heavy Duty Steel Workshop Trolley

Skylarc Ref Z146246

Expected Auction End Time: 13th August 2023 7:22pm

Heavy duty plate steel construction
900mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Heavy Duty Steel Workshop Trolley

Skylarc Ref A146247

Expected Auction End Time: 13th August 2023 6:54pm

Heavy duty plate steel construction
1010mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Heavy Duty Steel Workshop Trolley

Skylarc Ref B146248

Expected Auction End Time: 13th August 2023 6:50pm

Heavy duty plate steel construction
1010mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Ryobi Corded 80mm Belt Sander EBS81321K

Skylarc Ref V145046

Expected Auction End Time: 13th August 2023 6:26pm

Ryobi Corded 80mm Belt Sander.
Model No. EBS81321K.
Includes dust catcher bag and carry case.

Heavy Duty Steel Workshop Trolley

Skylarc Ref C146249

Expected Auction End Time: 13th August 2023 8:46pm

Heavy duty plate steel construction
1010mm x 430mm top
700mm tall to top shelf
Heavy duty wheels

Precision Pressure Test Gauge by Ashcroft

Skylarc Ref W145047

Expected Auction End Time: 13th August 2023 6:29pm

Precision Pressure Test Gauge by Ashcroft.
Made in USA.
0.1 psi subd
Accuracy grade 3A, 0.25%
190mm diameter.
Includes custom made steel case.

Capital Pallet Racking 5 Bays

Skylarc Ref D146250

Expected Auction End Time: 13th August 2023 7:27pm

6 x 3000mm x 1000mm galvanized uprights
20 x 2300kg 1350mm long step crossbeams
Buyer to dismantle
Contents not included

Capital Pallet Racking 5 Bays

Skylarc Ref E146251

Expected Auction End Time: 13th August 2023 7:28pm

6 x 3000mm x 1000mm galvanized uprights
20 x 2300kg 1350mm long step crossbeams
Buyer to dismantle
Contents not included

Vintage Narex Branded Tap & Die Set in Bakelite Case

Skylarc Ref X145048

Expected Auction End Time: 13th August 2023 9:13pm

Vintage Narex Branded Tap & Die Set in Bakelite Case.
Case measures approx 430x230x45mm.
See photos for included components.
Age of set is unknown.

Heavy Duty Avery Scales

Skylarc Ref F146252

Expected Auction End Time: 13th August 2023 8:18pm

Avery 500kg platform scales
1250mm x 700mm platform

Pallet Racking

Skylarc Ref G146253

Expected Auction End Time: 13th August 2023 8:57pm

2 x uprights 2440mm x 1000mm
8 x crossbeams 2760mm long

8-Piece 3/4" Drive Impact Metric Socket Set

Skylarc Ref Y145049

Expected Auction End Time: 13th August 2023 9:01pm

8-Piece 3/4" Drive Impact Metric Socket Set.
Platinum Pro branded case.
Fuhao and FH Tools branded Sockets.
Sizes include 17mm, 19mm, 22mm 24mm, 27mm, 32mm, 36mm, and 38mm.
All appear as new unused. Some marks on case exterior.

Vintage Wooden Workbench w/ Vice

Skylarc Ref Z145050

Expected Auction End Time: 13th August 2023 6:58pm

Vintage Wooden Workbench w/ Vice.
1mm thick steel sheet over wood board work surface which is approx 915mm above floor.
455mm high MDF back wall board.
Lower wooden drawers.
Swordfish branded vice with 150mm wide jaws.
Well used but sturdy Workbench.

DeWalt Coded Jig Saw DW318-45

Skylarc Ref A145051

Expected Auction End Time: 13th August 2023 6:03pm

DeWalt Coded Jig Saw.
Model No. DW318-45
Shows heavy workshop wear

Single Phase MIG Welder

Skylarc Ref H146254

Expected Auction End Time: 13th August 2023 8:06pm

Model: CIG Autopak 150
150 amp max welding output
Includes gun and regulator
On wheels

Makita Corded Hammer Drill HP2010N

Skylarc Ref B145052

Expected Auction End Time: 13th August 2023 6:46pm

Makita Corded Hammer Drill.
Model No.HP2010N
13mm Keyed Chuck with key.
Removable side handle.

Myford Super 7 Lathe and Accessories

Skylarc Ref I146255

Expected Auction End Time: 13th August 2023 7:46pm

Model: Myford Super 7 Lathe
Approx 500mm between centres
100mm swing over bed
15mm spindle bore
Thread cutting gearbox
Spindle speeds 25rpm - 2150rpm
100mm three jaw chuck
180mm faceplate
150mm three jaw chuck
MT 2 tailstock taper
Quick change tool post
On steel stand
Taper turning attachment
6 station capstan
Vertical milling slide
Indexer
Wide range of tooling
Assorted chucks and other accessories
1962-1963 model year
The best and most complete example of this historic lathe we have seen

Bosch Corded 230mm Angle Grinder, damge to cord.

Skylarc Ref C145053

Expected Auction End Time: 13th August 2023 7:25pm

Bosch Corded 230mm Angle Grinder.
Model.No. GWS 24-230 LVI Professional.
Includes a set of spare disk holder disks. Wrench is missing.
Cord has a chip in rubber coating showing exposed wire. Will need replacing.

Bosch Corded 185mm Circular Saw, cord damage

Skylarc Ref D145054

Expected Auction End Time: 13th August 2023 7:12pm

Bosch Corded 185mm Circular Saw.
Model No.GKS190 Professional.
Cord is broken with damaged exposed wires where it enters the Tool. Tool will need electrical servicing and cord replacement.

Makita Corded Belt Sander 9031

Skylarc Ref E145055

Expected Auction End Time: 13th August 2023 9:23pm

Makita Corded Belt Sander.
Model No.9031

Makita Corded Belt Sander 9032

Skylarc Ref F145056

Expected Auction End Time: 13th August 2023 7:59pm

Makita Corded Belt Sander.
Model.No. 9032

Myford Single Phase Lathe

Skylarc Ref J146256

Expected Auction End Time: 13th August 2023 9:13pm

Model: Myford ML7 Lathe
1953 - 1954 model year
Single phase
Approx 500mm between centres
100mm swing over bed
15mm spindle bore
100mm three jaw chuck
180mm faceplate
MT 2 tailstock taper
Steel framed stand
Built in wooden cabinet
Some tooling and accessories
A tidy example of this historic machine

Hikoki Corded 125mm Angle Grinder, Damaged cord

Skylarc Ref G145057

Expected Auction End Time: 13th August 2023 7:38pm

Hikoki Corded 125mm Angle Grinder.
Model No. G13SB3.
Disk Wrench is missing.
Cord is damaged, see photos.

Vintage Wooden Wookbench

Skylarc Ref H145058

Expected Auction End Time: 13th August 2023 6:59pm

Vintage Wooden Wookbench.
1mm thick steel cover top surface with wood boards underneath.
Work surface 975mm sbove floor.
Wood board frome.
450mm high MDF back wall and sides with a paper towel Dispenser attached, see photos.
Two lower wooden drawers.
Note - Items seen on and under Workbench are NOT included.

Assorted Sizes / Types of Grinding, Cut-off & Sanding Disks

Skylarc Ref I145059

Expected Auction End Time: 13th August 2023 8:02pm

Assorted Sizes / Types of Grinding, Cut-off & Sanding Disks.
Diameters of 125mm, 180mm, 230mm and 400mm.
Wide range of Types and brands.
Most appear unused. Some may show usage.

Bearing Heater

Skylarc Ref K146257

Expected Auction End Time: 13th August 2023 7:52pm

Single phase bearing bath heater
Variable temperature
Aluminium

4x 406mm Flexovit Metal Cutting Disks

Skylarc Ref J145060

Expected Auction End Time: 13th August 2023 9:23pm

4x 406mm Flexovit Metal Cutting Disks.
As new unused.

Building Wire Brace System Tool

Skylarc Ref L146258

Expected Auction End Time: 13th August 2023 9:35pm

Model: Power Team Wire Teknic Model B C108C 10 Ton strainer
Crimpers
Porta power
Box and accessories

Assorted Sanding Rolls and Belts

Skylarc Ref K145061

Expected Auction End Time: 13th August 2023 6:49pm

Assorted Sanding Rolls and Belts.
Includes:
Norton Metal Cloth Handy Rolls K283 in grits of P80, P240, and P180. All rolls are partials.
S+G Abrasives roll of 120 grit, partial roll.
Assorted Norton sanding belts, unsure if they are in their original packaging.
Leftover workshop supplies.

Repair Dolly

Skylarc Ref M146259

Expected Auction End Time: 13th August 2023 7:18pm

Panel beaters repair dolly
380mm wide
Multiple shaped surfaces
Very heavy

Flam Automatic Screw Driver

Skylarc Ref N146260

Expected Auction End Time: 13th August 2023 8:08pm

Model: Flam 192313160
High speed screw feeder system
Single phase

Hot Wax Application System

Skylarc Ref O146261

Expected Auction End Time: 13th August 2023 6:56pm

I&J Fisnar INC
Single phase

Assorted Air Tool Hoses w/ 11x Air Blow Guns

Skylarc Ref L145062

Expected Auction End Time: 13th August 2023 8:47pm

Assorted Air Tool Hoses w/ 11x Air Blow Guns.
Various brands of Air blow Guns.
Approx 16+ various Air hoses, lengths unknown.
Condition varies with each item.

Moore and Wright Micrometre

Skylarc Ref P146262

Expected Auction End Time: 13th August 2023 7:02pm

Model: Moore and Wright 941X
0 - 4"
In case

Starret Micrometre

Skylarc Ref Q146263

Expected Auction End Time: 13th August 2023 8:38pm

Model: Starret No.224M
0-100mm

3x Air Die Grinders w/ Attached hoses

Skylarc Ref M145063

Expected Auction End Time: 13th August 2023 9:04pm

3x Air Die Grinders w/ Attached hoses.
All Grinders are ToolShed branded. Two units are Model TSA22, one is model.TSA30.
All have airlines attached.
3x tip Wrenches plus 2x extra tip attachments included.

Leak Detector

Skylarc Ref R146264

Expected Auction End Time: 13th August 2023 9:38pm

Model: Robinair 14950-A

Myford Quick Change Tool Post

Skylarc Ref S146265

Expected Auction End Time: 13th August 2023 6:16pm

Quick change toolpost
New in box

Extremely Rare 70th Anniversary Mitutoyo Set

Skylarc Ref T146266

Expected Auction End Time: 13th August 2023 8:22pm

Mitutoyo 70th anniversary set
Vernier caliper and digital micrometre
One of only 70 sets ever made
Fine wooden box
Documentation
New and unused

Steel Workshop Storage Shelf

Skylarc Ref N145064

Expected Auction End Time: 13th August 2023 8:52pm

Steel Workshop Storage Shelf.
40mm angle steel frame.
MDF shelves with steel sheet over each board.
Top shelf 310mm wide, middle shelf 610mm wide bottom shelf 910mm wide.
Items seen on shelves are NOT included.

Taper Turning Attachment

Skylarc Ref U146267

Expected Auction End Time: 13th August 2023 6:58pm

Taper turning attachment
Believed to be off 13" lathe

Assorted G-Clamps and F-Clamps

Skylarc Ref O145065

Expected Auction End Time: 13th August 2023 8:13pm

Assorted G-Clamps and F-Clamps.
Four G-clamps in sizes of 2x 200mm, 2x 100mm.
2x F-clamps with lengths of approx 250mm and 180mm.
All G-clamps have bent threaded rods most missing end caps.

2x 300mm G-Clamps

Skylarc Ref P145066

Expected Auction End Time: 13th August 2023 7:31pm

2x 300mm G-Clamps.
Each is a different design with different length of threaded bar, see photos.

9 x Large Milling Machine Cutters

Skylarc Ref V146268

Expected Auction End Time: 13th August 2023 9:50pm

Largest size 32mm diameter
Mainly Osborn brand
Metric and imperial
Most appear new

2x 250mm G-Clamps

Skylarc Ref Q145067

Expected Auction End Time: 13th August 2023 9:04pm

2x 250mm G-Clamps.
Unknown manufacturer.

Small Tool Cabinet

Skylarc Ref W146269

Expected Auction End Time: 13th August 2023 6:34pm

Tool cabinet with plastic drawers
Large drawer at bottom
Contents of tooling accessories

2x 300mm G-Clamps

Skylarc Ref R145068

Expected Auction End Time: 13th August 2023 10:00pm

2x 300mm G-Clamps.
Unknown manufacturer.

AmPro Air Chisel

Skylarc Ref S145069

Expected Auction End Time: 13th August 2023 6:53pm

AmPro Air Chisel.
Unable to read model number on worn ID label.

Record No.4 Benchtop Vice

Skylarc Ref T145070

Expected Auction End Time: 13th August 2023 7:18pm

Record No.4 Benchtop Vice.
120mm wide plastic jaws installed.

11 Part Packs of Tool Tips

Skylarc Ref X146270

Expected Auction End Time: 13th August 2023 9:18pm

Assorted tool tips

Industrial Bench Grinder, 3-Phase

Skylarc Ref U145071

Expected Auction End Time: 13th August 2023 6:17pm

Industrial Bench Grinder, 3-Phase.
ID label worn so manufacturer and model unknown.
Uses 300mm diameter grinding wheels.
Eye safety screens and Mounts are missing.

Assorted Part Packs of Tool Tips

Skylarc Ref Y146271

Expected Auction End Time: 13th August 2023 7:45pm

12 part packs of tips
3 1/4" x 4 square tool steel

Large Thread Tap w/ Mounting Attachment

Skylarc Ref V145072

Expected Auction End Time: 13th August 2023 6:30pm

Large Thread Tap w/ Mounting Attachment.
Unknown manufacturer and model as no ID markings are visible.
Hand measured to be approx 86mm diameter, 65mm long thread cutting head.
Mounting shank 38mm diameter.
Thread Tap excellent condition. Mounting attachment good condition showing moderate wear.

Three Phase Fan

Skylarc Ref Z146272

Expected Auction End Time: 13th August 2023 8:50pm

600mm diameter
Plug has been cut off

Three Phase Fan

Skylarc Ref A146273

Expected Auction End Time: 13th August 2023 7:12pm

Approx 600mm diameter fan
In steel frame
On wheels
Plug has been cut off

Pair of Steel Saw Horses

Skylarc Ref W145073

Expected Auction End Time: 13th August 2023 9:24pm

Pair of Steel Saw Horses.
38x20mm solid steel top bar.
40x40mm angle steel legs.
Sturdy units.

Three Phase Fan

Skylarc Ref B146274

Expected Auction End Time: 13th August 2023 6:40pm

Three phase fan
5 pin 20 amp plug
Approx 600mm diameter

Coventry Diehead Thread Cutter

Skylarc Ref X145074

Expected Auction End Time: 13th August 2023 8:46pm

Coventry Diehead Thread Cutter.
Unknown manufacturer and model number.
38mm diameter mounting shank.
67mm diameter, 50mm deep centre inner hole (excluding Thread cutting teeth).

Parts Only Pipe Bender

Skylarc Ref A145077

Expected Auction End Time: 13th August 2023 7:43pm

Large pipe bender
No formers
Hydraulic action not working
Unknown fault, possibly no oil

Coventry Diehead Thread Cutter

Skylarc Ref Y145075

Expected Auction End Time: 13th August 2023 9:32pm

Coventry Diehead Thread Cutter.
OSG 25 Aihara Work labeling on unit.
38mm diameter mounting shank.
Approx 25mm diameter cenrte hole (excluding mounted thread teeth).

NT30 Tool Holders and Tooling

Skylarc Ref C146275

Expected Auction End Time: 13th August 2023 8:44pm

NT30-SLA20 tool holder with insert drill
Seco insert drill
2.5mm - 16mm drill chuck on NT30
Drill chuck no holder
0-1/4" drill chuck

Coventry Diehead Thread Cutter

Skylarc Ref Z145076

Expected Auction End Time: 13th August 2023 6:28pm

Coventry Diehead Thread Cutter.
OSG 25 Aihara Work labeling on unit.
38mm diameter mounting shank.
Approx 25mm diameter cenrte hole (excluding mounted thread teeth).

5 x NT30 Tool Holders

Skylarc Ref D146276

Expected Auction End Time: 13th August 2023 8:11pm

No.2 morse taper adaptor
No.3 morse taper adaptor
2 x approx 5mm adaptors
60mm adaptor

Milling Face Cutters and Tool Holders

Skylarc Ref E146277

Expected Auction End Time: 13th August 2023 7:24pm

2 x NT30 spindle taper tool holders
4 x Face Cutters

Coventry Diehead Thread Cutter by Herbert

Skylarc Ref R145666

Expected Auction End Time: 13th August 2023 8:33pm

Coventry Diehead Thread Cutter.
Made in England by Herbert.
1" C.H.S.
Morse Taper No.4 Shank.

Swager and Accessories

Skylarc Ref B145078

Expected Auction End Time: 13th August 2023 7:07pm

Small brass swager
Approx 20mm diameter wheels
Assorted covers

Coventry Diehead Thread Cutter

Skylarc Ref S145667

Expected Auction End Time: 13th August 2023 9:39pm

Coventry Diehead Thread Cutter.
Unknown manufacturer.
Hand written ¾" BSP on exterior.
28mm diameter hand measured inner hole.
38mm diameter mounting shank.

6 x Parallels

Skylarc Ref F146278

Expected Auction End Time: 13th August 2023 6:47pm

2 x 230mm x 47mm x 15mm (one slightly longer than the other)
4 x 170 x 50mm x 23mm (all slightly different lengths)

Coventry Diehead Thread Cutter

Skylarc Ref T145668

Expected Auction End Time: 13th August 2023 6:52pm

Coventry Diehead Thread Cutter.
Made in England by Alfred Herbert Ltd
1" marked on exterior of unit.
38mm diameter mounting shank

Coventry Diehead Thread Cutter

Skylarc Ref U145669

Expected Auction End Time: 13th August 2023 8:16pm

Coventry Diehead Thread Cutter.
Unknown manufacturer.
Unknown cutting teeth type.
Approx 67mm diameter, 50mm depth inner (excluding teeth) when measured with tape measure.
38mm diameter mounting shank.

Coventry Diehead Thread Cutter

Skylarc Ref V145670

Expected Auction End Time: 13th August 2023 8:59pm

Coventry Diehead Thread Cutter.
Unknown manufacturer.
¾" BSPT marked on exterior of unit. Approx 40mm diameter inner hole (excluding teeth) when measured with tape measure.
38mm diameter mounting shank.

Coventry Diehead Thread Cutter

Skylarc Ref W145671

Expected Auction End Time: 13th August 2023 9:01pm

Coventry Diehead Thread Cutter.
Unknown manufacturer.
Unknown mounted cutting teeth type.
Approx 67mm diameter, 50mm depth inner (excluding teeth) when measured with tape measure.

Coventry Diehead Thread Cutter

Skylarc Ref X145672

Expected Auction End Time: 13th August 2023 6:24pm

Coventry Diehead Thread Cutter.
Unknown manufacturer.
1¼"" BSP hand marked on exterior of unit. Approx 67mm diameter, 50mm depth inner (excluding teeth) when measured with tape measure.

Coventry Diehead Thread Cutter

Skylarc Ref Y145673

Expected Auction End Time: 13th August 2023 9:42pm

Coventry Diehead Thread Cutter.
Unknown manufacturer.
1½"" BSP hand marked on exterior of unit. Approx 67mm diameter, 50mm depth inner (excluding teeth) when measured with tape measure.

Coventry Diehead Thread Cutter

Skylarc Ref Z145674

Expected Auction End Time: 13th August 2023 6:27pm

Coventry Diehead Thread Cutter.
Unknown manufacturer.
2" BSPT hand marked on exterior of unit. Approx 67mm diameter, 50mm depth inner (excluding teeth) when measured with tape measure.

Coventry Diehead Thread Cutter

Skylarc Ref A145675

Expected Auction End Time: 13th August 2023 7:03pm

Coventry Diehead Thread Cutter.
Unknown manufacturer.
1" BSPT hand marked on exterior of unit. Approx 40mm diameter inner (excluding teeth) when measured with tape measure.

Mobile Workshop Shelving

Skylarc Ref C145079

Expected Auction End Time: 13th August 2023 8:12pm

Capital style pallet racking
On wheels
3 levels

Coventry Diehead Thread Cutter

Skylarc Ref B145676

Expected Auction End Time: 13th August 2023 9:58pm

Coventry Diehead Thread Cutter.
Unknown manufacturer.
1½" marked on exterior of unit. Approx 40mm diameter inner (excluding teeth) when measured with tape measure.

Assorted Welding Wire and Electrodes

Skylarc Ref D145080

Expected Auction End Time: 13th August 2023 7:14pm

Assorted part packs of welding wire and electrodes

Coventry Diehead Thread Cutter

Skylarc Ref C145677

Expected Auction End Time: 13th August 2023 9:25pm

Coventry Diehead Thread Cutter.
Unknown manufacturer.
Size not marked on unit. Approx 40mm diameter inner (excluding teeth) when measured with tape measure.

Coventry Diehead Thread Cutter

Skylarc Ref D145678

Expected Auction End Time: 13th August 2023 8:18pm

Coventry Diehead Thread Cutter.
Unknown manufacturer.
Size not marked on unit. Approx 55mm diameter inner (excluding teeth) when measured with tape measure.

Vintqge Wooden Workbench

Skylarc Ref E145679

Expected Auction End Time: 13th August 2023 7:18pm

Vintqge Wooden Workbench.
Wood type unknown
Two drawers.
Lower sliding door cabinet.
Wood board top surface.
Note that items seen on top of unit are NOT included.

Welding Accessories

Skylarc Ref G146279

Expected Auction End Time: 13th August 2023 6:29pm

Mig welding gun
Gouging torch
Negative electrode

Cogsdill-Nuneaton Recessing Head ST1-TRB

Skylarc Ref F145680

Expected Auction End Time: 13th August 2023 6:43pm

Cogsdill-Nuneaton Recessing Head.
Model.no.ST1-TRB.

Mobile Workshop Shelving

Skylarc Ref H146280

Capital style pallet racking
On wheels
4 levels
Contents not included

Warren and Brown Belt Tensioner Dial Guage

Skylarc Ref I146281

Expected Auction End Time: 13th August 2023 6:38pm

Model: Warren and Brown 8620B
In box

2 x Ampro Die Grinders

Skylarc Ref J146282

Expected Auction End Time: 13th August 2023 9:22pm

Ampro A6316 Micro Die Grinder Kit (New)
Ampro A3023 Die Grinder Kit

Assortment of Milling Machine Cutters

Skylarc Ref K146283

Expected Auction End Time: 13th August 2023 7:27pm

20 cutters total
Assorted styles
Largest 42mm diameter

140+ Assorted Drill Bits

Skylarc Ref G145681

Expected Auction End Time: 13th August 2023 6:57pm

140+ Assorted Drill Bits.
Various metric and Imperial sizes.
Condition varies greatly with each unit.

70+ Assorted Drills, Reamer, & More

Skylarc Ref H145682

Expected Auction End Time: 13th August 2023 7:09pm

70+ Assorted Drills, Reamer, & More.
Assorted metric and Imperial sizes.
Condition varies with each unit.

Large Assortment of Milling Machine Blades

Skylarc Ref L146284

Expected Auction End Time: 13th August 2023 8:27pm

25 total
Mainly 3" and 4"

Large Lot of Milling Machine Cutters

Skylarc Ref M146285

Expected Auction End Time: 13th August 2023 7:05pm

19 total
Sizes up to 8"
Various types

32x Assorted Thread Dies

Skylarc Ref I145683

Expected Auction End Time: 13th August 2023 6:21pm

32x Assorted Thread Dies.
Outside diameters range from 32mm to 165mm.
Condition varies with each unit

Assortment of Milling Machine Cutters

Skylarc Ref N146286

Expected Auction End Time: 13th August 2023 6:21pm

19 cutters total
Largest size 25mm

Assorted Milling Machine Cutters

Skylarc Ref O146287

Expected Auction End Time: 13th August 2023 8:50pm

18 total
Assortment of types
Largest size 36.1mm

Assorted Bulk Screws, Bolts, Nuts

Skylarc Ref J145684

Expected Auction End Time: 13th August 2023 8:33pm

Assorted Bulk Screws, Bolts, Nuts.
Metric and Imperial sizes, see photos.
Leftover unused workshop parts stock.

AEG 18 Volt Drill

Skylarc Ref P146288

Expected Auction End Time: 13th August 2023 8:10pm

Model: AEG A18PDB 18 volt drill
4ah battery
BL1218 charger
Case

Spitfire Diesel / Kerosene Workshop Heater DC45, Faulty

Skylarc Ref K145685

Expected Auction End Time: 13th August 2023 6:50pm

Spitfire Diesel / Kerosene Workshop Heater.
Model No. DC45.
Faulty motor.

Hitachi Planer

Skylarc Ref Q146289

Expected Auction End Time: 13th August 2023 9:38pm

Model: Hitachi P 20SF
82mm planer
620 watt
17000rpm
In case

Assortment of Milling Machine Cutters

Skylarc Ref R146290

Expected Auction End Time: 13th August 2023 7:41pm

34 cutters total
Metric and imperial sizes
Smallest size 9mm
Largest 25mm
Mostly bull nose

54-Drawer Steel Parts Bin Cabinet with Contents

Skylarc Ref L145686

Expected Auction End Time: 13th August 2023 6:54pm

54-Drawer Steel Parts Bin Cabinet with Contents.
Each Drawer interior measures approx 130mm wide, 370mm long, 105mm high.
Includes all contents of drawers which include assorted Fastening Hardware, etc
See our other listings for two more identical Drawer cabinets full of similar items!

Clarkson Autolocking Chuck

Skylarc Ref S146291

Expected Auction End Time: 13th August 2023 9:55pm

Model: Clarkson No 30 INT Type S
NT 30 spindle taper
Fitted with threading tool
Assortment of collets
Wrench
Case

54-Drawer Steel Parts Bin Cabinet with Contents

Skylarc Ref M145687

Expected Auction End Time: 13th August 2023 6:49pm

54-Drawer Steel Parts Bin Cabinet with Contents.
Each Drawer interior measures approx 130mm wide, 370mm long, 105mm high.
Includes all contents of drawers which include assorted Fastening Hardware, etc
See our other listings for two more identical Drawer cabinets full of similar items!

13 x Milling Machine Cutters

Skylarc Ref T146292

Expected Auction End Time: 13th August 2023 7:41pm

Large diameter cutters
Metric and imperial sizes
Largest 40mm
Smallest 7/8"

Heavy Duty Steel Workshop Shelf Trolley

Skylarc Ref N145688

Expected Auction End Time: 13th August 2023 8:43pm

Heavy Duty Steel Workshop Shelf Trolley.
5mm thick angle steel frame with 5mm thick steel plate top and bottom surfaces..
100mm diameter, 50mm Wide heavy Duty castors.
15mm thick steel bar handle.
Length and height dimensions including handle are 1200mm and 970mm.
Well built, solid unit.

2 x Hydraulic Bottle Jacks

Skylarc Ref U146293

Expected Auction End Time: 13th August 2023 7:12pm

Topmaq brand
20 ton bottle jacks

54-Drawer Steel Parts Bin Cabinet with Contents

Skylarc Ref O145689

Expected Auction End Time: 13th August 2023 9:32pm

54-Drawer Steel Parts Bin Cabinet with Contents.
Each Drawer interior measures approx 130mm wide, 370mm long, 105mm high.
Includes all contents of drawers which include assorted Fittings, brass and steel Fastening Hardware, couplings, etc
See our other listings for two more identical Drawer cabinets full of similar items!

Assortment of Milling Machine Blades

Skylarc Ref V146294

Expected Auction End Time: 13th August 2023 7:06pm

11 blades total
Assorted sizes

Universal Facing and Boring Head

Skylarc Ref W146295

Expected Auction End Time: 13th August 2023 9:35pm

Model: MST MU 3 Universal Boring and Facing Head
NT 30 spindle taper
Accessories
Case

70x Assorted Thread Taps

Skylarc Ref P145690

Expected Auction End Time: 13th August 2023 9:42pm

70x Assorted Thread Taps.
Wide variety of sizes and types.
Condition varies greatly with each unit.

Clarkson Autolocking Chuck

Skylarc Ref X146296

Expected Auction End Time: 13th August 2023 7:00pm

Clarkson Autolocking Chuck
NT30 spindle taper
Assortment of collets
Spanner

Set of 5mm Steel Letter and Number Stamps

Skylarc Ref Q145691

Expected Auction End Time: 13th August 2023 7:50pm

Set of 5mm Steel Letter and Number Stamps.
Made in England by Eclipse.
70mm lengths.
5mm size letter and numbers.

Storm Air Die Grinder

Skylarc Ref R145692

Expected Auction End Time: 13th August 2023 9:27pm

Storm Air Die Grinder.
Unknown model number.
Untested. Shaft spins freely.

Induma Vertical Milling Machine

Skylarc Ref B146300

Expected Auction End Time: 13th August 2023 9:00pm

Induma three phase milling machine
1070mm x 230mm T-slot table
NT30 spindle taper
2 power heads
Power feeds
8 spindle speeds
132 - 4440rpm
Approx 120mm spindle travel
1.8hp main spindle motor
Secondary spindle unknown HP
12 x feed speeds
155mm mill vice
ER32 collect chuck and collets

Wooden Workbench

Skylarc Ref S145693

Expected Auction End Time: 13th August 2023 9:08pm

Wooden Workbench.
Work surface 940mm above floor.
Thivk wood frame.
430mm high MDF back wall and Sides.
Two lower drawers.
Well used but strudy unit.
Note - Items seen on Workbench are NOT included.

Workshop Cabinet

Skylarc Ref Y146297

Expected Auction End Time: 13th August 2023 6:44pm

Galvanized steel construction

Vintage Steel Topped Wooden Workbench w/ Vice

Skylarc Ref T145694

Expected Auction End Time: 13th August 2023 6:07pm

Vintage Steel Topped Wooden Workbench w/ Vice.
1mm thick steel top surface sheet approx 905mm above floor.
Thick wood frame.
450mm high back MDF wall with small shelves and plug-in adjustable light (light is functioning).
English made vice with 155mm wide jaws.
Two lower drawers.
Item shows heavy wear and usage but seems sturdy.

Vintage Steel Topped Wooden Workbench w/ Vice

Skylarc Ref U145695

Expected Auction End Time: 13th August 2023 8:16pm

Vintage Steel Topped Wooden Workbench w/ Vice.
1mm thick steel sheet top surface approx 915mm above floor.
Thick.wood frame
460mm high back MDF wall with sides.
Two lower drawers.
Unknown brand vice with 155mm wide jaws.
Workbench shows heavy usage and wear but seems sturdy.

Assorted Grease Nipples

Skylarc Ref V145696

Expected Auction End Time: 13th August 2023 7:52pm

Assorted Grease Nipples.
Various sizes in non-original cases.

Milling Machine Rotary Table

Skylarc Ref Z146298

Expected Auction End Time: 13th August 2023 8:59pm

380mm diameter rotary table
Unknown maker
Includes 3 indexing wheels
Moves smoothly

5x Cases of Assorted Roll and Cotter Pins

Skylarc Ref W145697

Expected Auction End Time: 13th August 2023 9:50pm

5x Cases of Assorted Roll and Cotter Pins.
Four cases of Assorted Sizes of roll pins.
One case of Assorted Cotter Pins.
Cases show workshop storage wear and damage.

3x Cases of Circlips, Assorted Sizes

Skylarc Ref X145698

Expected Auction End Time: 13th August 2023 8:10pm

3x Cases of Circlips, Assorted Sizes.
Cases show workshop storage wear.

Dividing Head

Skylarc Ref A146299

Expected Auction End Time: 13th August 2023 8:21pm

Milling machine indexing head
160mm Burnerd four jaw chuck
Tail stock
3 x wheels
Outside and inside jaws
Minor cracking on one jaw slide

Assorted Compression & Extension Springs

Skylarc Ref Y145699

Expected Auction End Time: 13th August 2023 8:20pm

Assorted Compression & Extension Springs.
See photos for included types, brands.
Cases show workshop storage wear.

Assorted Nitrile O-Rings, w/ Splicing Kit + Rubber Grommetts

Skylarc Ref Z145700

Expected Auction End Time: 13th August 2023 9:44pm

Assorted Nitrile O-Rings, w/ Splicing Kit + Rubber Grommetts.
2x Gmors O-Ring Nitrile 70 Duro kits, one Imperail and one metric Sizes.
Loctite O-Ring splicing kit.
Assorted Sizes of rubber grommets.
Cases show workshop storage wear.