Skylarc Ref X122734
Expected Auction End Time: 28th February 2021 10:00pm
26x Dixbro 200mm Brushwire Grinding Wheels.
Made in NZ by Dixbro.
All are 200x13mm, multi 28SWG Gauge.
Condition - Leftover old unused workshop stock. Very dirty boxes from parts room storage, some wheels show Wire rusting from storage.
Skylarc Ref W122733
Expected Auction End Time: 28th February 2021 8:26pm
3-Jaw Lathe Chuck, 315mm Diameter.
Unknown manufacturer and model number.
250mm Diameter Chuck.
Jaws close to approx 60mm minimum distance.
Tapered Mouting shaft approx 43mm diameter at widest and 155mm in length.
Includes Chuck key.
Skylarc Ref V122732
Expected Auction End Time: 28th February 2021 6:27pm
3-Jaw Lathe Chuck, 250mm Diameter.
Unknown manufacturer and model number.
250mm Diameter Chuck.
Jaws close to approx 60mm minimum distance.
Tapered Mouting shaft approx 43mm diameter at widest and 155mm in length.
Chuck key is missing.
Skylarc Ref U122731
Expected Auction End Time: 28th February 2021 8:29pm
Assorted Workshop Hand Tools, Spanners, Hammer, Drill Bit, Chisel.
Includes the following items:
- Whitehouse branded ballpeen hammer.
- 6x Spanners in sizes 1/2", 22mm (2x), 25mm, 30mm, and 32mm.
- Sidchrome Chisel 22mm wide tip.
- Imperial Sized Morse Taper No. 4 Taper width, unable to read size marking, 1-inch plus in size, see photo.
Condition varies with each item. All show industrial wear and usage.
Skylarc Ref R124054
Expected Auction End Time: 28th February 2021 9:19pm
Nitchi 0.5 Tonne Electric Chain Hoist and Trolley.
Electric Trolley:
Nitchi Model EMT-5.
3 Phase, 400V, 50Hz, 1.02A.
Motor 0.2kW - 20M/min.
Chain Hoist:
Nich Model ECT40050.
3 Phase, 400V, 50Hz, 1.8-2.5A.
Motor (2 Speed) 0.23-0.9kW - 2.2-8.5M/min.
Skylarc Ref L122722
Expected Auction End Time: 28th February 2021 8:49pm
Large Lathe Boring Bar w/ Removable Cutting Head.
Unknown manufacturer.
Cutting head unit marked with R479.9-, 323422-16.
Total unit length approx 525mm.
Attached Mouting sleeve approx 60mm diameter.
Skylarc Ref D122714
Expected Auction End Time: 28th February 2021 7:08pm
Sandvik Coromant Lathe Boring Bar w/ Replaceable Head.
Removable cutting head unit is part No. R571.31C-403227-12.
Boring Bar shaft unit has no visible ID marks and is approx 355mm long, 40mm diameter.
Skylarc Ref V122706
Expected Auction End Time: 28th February 2021 7:06pm
Model: Stanko 1M63B
Overall bed length 3900mm
Distance between centers approx 3500mm
Spindle speeds 24 spindle speeds
10rpm - 1250rpm
Metric and imperial thread cutting
70mm spindle bore
Swing over bed approx 350mm (700mm diameter) no gap
Powered carriage
370mm diameter 3 jaw chuck
500mm diameter 4 jaw chuck
Standard tool post
Manufactured 1990
Manual
Skylarc Ref W122707
Expected Auction End Time: 28th February 2021 6:48pm
Model: Stanko 1M63
Overall bed length 3650mm
Distance between centers approx 3000mm
Spindle speeds 24 spindle speeds
10rpm - 1250rpm
Metric and imperial thread cutting but missing lead screw
70mm spindle bore
Swing over bed (gap removed) approx 500mm (1000mm diameter)
Powered carriage
3 steadies with assorted arms
400mm diameter 3 jaw chuck
50mm diameter boring bar with interchangeable heads
Large boring bar holder on cross slide
Manufactured 1978
Manual
To see a video of this machine running:
https://youtu.be/m5seq9VHfpw
Skylarc Ref X122708
Expected Auction End Time: 28th February 2021 9:09pm
Model: Stanko 1M63
Overall bed length 3650mm
Distance between centers approx 3000mm
Spindle speeds 24 spindle speeds
10rpm - 1250rpm
Metric and imperial thread cutting
70mm spindle bore
Has had riser system fitted to raise the headstock and tailstock 145mm to increase swing
Swing over bed (gap removed) approx 600mm (1200mm diameter)
Powered carriage
Steady
630mm diameter 4 jaw chuck
500mm diameter 3 jaw chuck
Large live centre fitted
55mm diameter x 820mm long boring bar
50mm x 220mm parting tool
Very large boring bar in riser tool post 1270mm long x 110mm
Manufactured 1976
Manual
To see a video of this machine running:
https://youtu.be/aWwzdHDV1Eo
Skylarc Ref C123389
Expected Auction End Time: 28th February 2021 7:17pm
Custom made computer controlled experimental packaging machine for parts
Wide range of high value components
Omron NB10W-TW01B controller
Busch Zebra RH 0010 B vacuum pump
Screw driven press
Infincon VGC501 vacuum gauge controller
ABB, Weidmuller, Omron control components
Aluminum and steel machine housing
ABB Brushless Servomotor
Orientalmotor gearhead motors
Pneumatic rams
Great collection of high tech components for other projects
Skylarc Ref V120757
Expected Auction End Time: 28th February 2021 9:58pm
Industrial Heavy Duty Pallet Racking Components.
Unknown brand.
Includes the following components:
- 2x 3050mm high, 840mm wide blue vertical frames.
- 6x 2750mm orange horizontal beams.
Skylarc Ref Q121999
Expected Auction End Time: 28th February 2021 8:19pm
32 x TEMC Riser EX-200R MS9610
TWMC Metal & Chemical Corporation Branded.
EX-200R MS9610 ORD-100C.
Riser Sleeve Dimensions: tapered diameter 85mm to 135mm Diameter, 120mm height.
32 Units per package.
Skylarc Ref P121998
Expected Auction End Time: 28th February 2021 7:50pm
9 x TEMC Riser Sleeves EX-200R MS9616.
TWMC Metal & Chemical Corporation Branded.
EX-200R MS9616 ORD-127C.
Riser Sleeve Dimensions: Tapered from 88mm to 160mm Diameter, 140mm height.
9 Units per package.
Skylarc Ref O121997
Expected Auction End Time: 28th February 2021 9:19pm
9 x TEMC Riser Sleeves EX-200R MS9616.
TWMC Metal & Chemical Corporation Branded.
EX-200R MS9616 ORD-127C.
Riser Sleeve Dimensions: Tapered from 88mm to 160mm Diameter, 140mm height.
9 Units per package.
Skylarc Ref P122336
Expected Auction End Time: 28th February 2021 9:25pm
Vintage Wood Workshop Table w/ Steel Top.
Thick 95x95mm wood legs.
30mm thick wood board top capped with a 5mm thick steel sheet.
Age of unit unknown.
Some wood chipping and cracking, especially at leg bases. Table feels very sturdy.
Skylarc Ref R122338
Expected Auction End Time: 28th February 2021 7:00pm
Vintage Avery 100kg Platform Industrial Scale.
Unknown model number.
Weighs up to 100kg in 500g incriments.
Weigh platform approx 485x345mm and 120mm above floor.
Condition - Shows heavy industrial wear and usage. Some rusting to platform.
Skylarc Ref L121942
Expected Auction End Time: 28th February 2021 6:39pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref I122433
Expected Auction End Time: 28th February 2021 6:20pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref H122432
Expected Auction End Time: 28th February 2021 7:24pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref G122431
Expected Auction End Time: 28th February 2021 7:09pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref F122430
Expected Auction End Time: 28th February 2021 9:58pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref E122429
Expected Auction End Time: 28th February 2021 8:13pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref D122428
Expected Auction End Time: 28th February 2021 6:24pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref C122427
Expected Auction End Time: 28th February 2021 8:27pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref B122426
Expected Auction End Time: 28th February 2021 6:04pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref A122425
Expected Auction End Time: 28th February 2021 9:47pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref Z122424
Expected Auction End Time: 28th February 2021 8:44pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref Y122423
Expected Auction End Time: 28th February 2021 9:49pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref X122422
Expected Auction End Time: 28th February 2021 7:18pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref W122421
Expected Auction End Time: 28th February 2021 7:36pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref V122420
Expected Auction End Time: 28th February 2021 8:38pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref U122419
Expected Auction End Time: 28th February 2021 6:37pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref T122418
Expected Auction End Time: 28th February 2021 7:50pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref S122417
Expected Auction End Time: 28th February 2021 6:42pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref R122416
Expected Auction End Time: 28th February 2021 9:07pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref Q122415
Expected Auction End Time: 28th February 2021 6:10pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref P122414
Expected Auction End Time: 28th February 2021 8:08pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref O122413
Expected Auction End Time: 28th February 2021 9:21pm
30 x TEMC MS9309 Riser Sleeve EX-400R.
TEMC Cast Metal Services Branded.
EX-400R MS9309.
30 Pieces.
MFG Dates ranging from: 2015-04-29 to 2017-11-06.
Sleeve Dimensions: 115mm diameter, 120mm height.
Skylarc Ref P122310
Expected Auction End Time: 28th February 2021 9:58pm
2x Small Pneumatic Rams.
No ID label on either unit some manufacturer and ram specs are unknown.
12mm diameter shafts, one shaft is extended out 180mm, unable to pull it farther out.
Main bodies are approx 320x60x60mm.
Both units untested. Both show wear and some rust spotting on surfaces.
Skylarc Ref M122307
Expected Auction End Time: 28th February 2021 7:24pm
Vintage Portable Thermocouple Potentiometer Type P6 by Cropico.
Made in England.
Age of unit is unknown.
Needle moves to between 1 and 2 when range switch is moved to first option. Not further tested.
Includes operating instructions.
Skylarc Ref L122306
Expected Auction End Time: 28th February 2021 7:46pm
Mixflo MF150S Commercial Induct Venting Fan Unit w/ Accessories.
150mm diameter ends.
Includes a 150-100mm reduction ring.
Includes 2x 100mm diameter, 6m long flexible piping tubes and 2x 100mm diameter tube Couplings.
Condition - Dusty from open storage. Doses not appear to have been previously used but cannot verify. Some accessories are still in manufacturer packaging.
Skylarc Ref I122303
Expected Auction End Time: 28th February 2021 9:40pm
2x Aluminium Padded Cases.
One case is approx 460x320x120mm external
Second case is approx 455x335x155mm external.
Both have padded interiors, see photos.
Both show wear marks and dust from industrial usage.
Skylarc Ref H122302
Expected Auction End Time: 28th February 2021 7:08pm
Welding Torch w/ Hose & Assorted Brass Welding Accessories.
Includes Messer branded gas torch with attached gas hose lines.
Includes BOC gas regulator attachment.
Includes flashback arrestor attachment.
Also includes Assorted other brass welding attachments, see photos
Skylarc Ref G122301
Expected Auction End Time: 28th February 2021 6:37pm
2x Carbon Dioxide & 1x Oxygen Welding Regulators.
Includes:
- 1x Tesuco single stage oxygen regulator.
- 2x BOC Carbon Dioxide Regulators each with attached Insulated gas hoses.
All items show moderate wear and usage.
Skylarc Ref F122300
Expected Auction End Time: 28th February 2021 7:35pm
Z-Link Welding Breather Helmet w/ Hose + Standard Honeywell Welding Mask.
Unknown model number for Z-Link breather helmet. Includes hose attachment and helmet unut only, breathing filtration unit and battery pack are NOT Included.
Includes an extra Honeywell branded standard welding face screen.
Items show moderate wear and usage.
Skylarc Ref J123110
Expected Auction End Time: 28th February 2021 8:13pm
HP EliteDesk 800 G3 SFF Computer.
Processor - Intel Core i7-7700 at 3.60GHz
8Gb RAM
256Gb SDD storage drive, wiped of old user data and operating system.
Note - There is NO operating system installed on or included with this computer.
Optical disk drive built in.
Includes Logitech K120 USB keyboard and HP USB mouse.
Includes power cord.
Condition - Some dust on exterior and interior surfaces, casing scratches etc.
Skylarc Ref I123109
Expected Auction End Time: 28th February 2021 8:06pm
Assorted Industrial Water Valves & More.
Includes:
- 2x Keystone branded 150mm diameter valves with a spare valve door.
- 1x Unknown brand 200mm valve.
- 1x Heaton branded 100mm valve with 2x spare valve handles.
Includes two other unknown type industrial units.
- 1x blue painted unit marked with EBH and WB515.
- 1x dark blue painted unit labeled Linatex type LTX-AL-TAB-DK.
Condition - Unknown if any units are used or if unused. All show dust and finish marks from storage.
Skylarc Ref F123106
Expected Auction End Time: 28th February 2021 8:55pm
Assorted Lot of Hand Tools, Files, Brushes, Wrenches, Threaders & More.
Includes a wide mix of used hand tools including Brushes, Wrenches, Spanners, files, Threaders, drill bit kits, Allen keys and more. See photos for further details on what items are included.
Condition varies with each item. Some show rusting.
Skylarc Ref D123104
Expected Auction End Time: 28th February 2021 6:05pm
24x Assorted Sizes of Hammers, Mallets, Sledges, + Shovel.
Includes assorted types and sizes of Hammers, Mallets, Sledges, etc. See photos for details on types and condition of each.
Includes one unused shovel.
Inudes a spare sledge handle.
Condition varies greatly with each unit.
Skylarc Ref C123103
Expected Auction End Time: 28th February 2021 6:54pm
22x Assorted Sizes of Air Chisel Attachments.
Longest unit is approx 500mm.
Largest diameter 25mm, smaller diameter approx 10mm.
See photos for details on types of Chisels included.
Condition varies with each unit, some are new, others show varying levels of usage.
Skylarc Ref B123102
Expected Auction End Time: 28th February 2021 9:20pm
5x Kits of Assorted Fuses, Links, Grinder Accessories, & More.
Includes:
- Quick Kit case 310x220x50mm of Assorted glass Fuses.
- Quck Kit case 310x220x50mm of Assorted links and lugs.
- Quick Kit case 310x220x50mm of Assorted pins, see photos.
- Stanley case 430x330x100mm with assorted angle Grinder Accessories, parts and other mixed items.
- Eureka Assortments Woodruff key assortment in 210x110x30mm case.
Skylarc Ref A123101
Expected Auction End Time: 28th February 2021 6:22pm
2-Metre long, 17mm Diameter Length of Chain.
Includes 2x Lifting Links each approx 100x65mm.
Condition - Chain appears to be an unused new length. The two smaller lifting links are older used items.
Skylarc Ref Y123099
Expected Auction End Time: 28th February 2021 9:16pm
Brother QL-570 Professional Label Printer.
Prints labels up to 65mm wide.
Includes 3x replacement label rolls type DK-22205.
Includds user manuals, power cord, USB cable, narrow label roll adapter, original box.
Condition - Printer and its accessories were used and stored in a dusty manufacturing environment so dust on and within Printer, box and replacement label boxes.
Skylarc Ref X123098
Expected Auction End Time: 28th February 2021 9:36pm
Datalogic Magellan 800i Laser Barcode Scanner Reader.
Model No. 800i
USB cord attached
Includes reference guide.
Condition - Unit appears unused, protective plastic film still atrached to backside of unit. Powerd on by us to test and for photos.
Skylarc Ref T123094
Expected Auction End Time: 28th February 2021 6:22pm
4x Dronco Twist Knotted Wire Cup Brushes.
Includes the following:
- 3x TBZ 65mm M-14 0.50mm.
- 1x TBZ 80mn M14 0.50mm.
Conditoin - the three 65mm units are as new unused. The 80mm unit shows some brief usage marks, see photos.
Skylarc Ref Q123091
Expected Auction End Time: 28th February 2021 8:53pm
Assorted Lot of Grinding & Sanding Disks Wheels.
Includes:
- 18x 180mm Dronco Special AS 24/30 T-BF.
- 4x 230mm Dronco Special AS 24/30 T-BF.
- 1x 230mm Dronco Special CS 24 R-BF.
- 21x 240mm Dronco Evolution AS 46 V Inox-BF.
- 2x 125mm Dronco Ceramaxx Evolution AK 36 T-BF.
- 7x 125mm Pferd PS-Forte E 125-7 A 30 P PSF.
- 1x 5" Vortex 5AM 96323.
- 1x 5" Norton Rapid Blend NEX-2SF.
- 1x 115mm Rottluff Promax CC EN43743 flap Disk.
- 1x 125mm flap disk with no ID label.
- 1x Dronco 125mm disk pad mount M14 EN13743.
- 3x 125mm ceramic alumina fibre sanding disks, 36 grit.
- 3x 125mm ceramic alumina fibre sanding disks, 60 grit.
- 41x 200mm Mirka Gold P60 grit Sanding Disks.
All items are unused leftover Workshop stock.
Skylarc Ref L123086
Expected Auction End Time: 28th February 2021 7:54pm
King Brinell Portable Metal Hardness Tester Head Unit.
Made in USA.
Model - Standard Head.
See the King weblink below for further item details:
https://www.kingtester.com/brinell-hardness-tester
Skylarc Ref F123080
Expected Auction End Time: 28th February 2021 8:07pm
Assorted Workshop Safety Gear, Hi Viis, Gloves, Overalls, Goggles & More.
Includes:
- 8x Pairs of Kanga Tuff Metguard Metarsal Protection plates.
- 1x Kanga Tuff Metguard Strap.
- 2x Verdict foam bound clear Goggles.
- 1x Profit Tactus fingerless anti vibration gloves, part No. PTF3XL.
- 3x CCCU Omix premium embossed back anti vibration gel gloves Part No. 425-034.
- bag of plain cotton garments.
- Safety CoverLite Type 5&6 protective coverall, Size L.
- Esko Titan 380 coverall, Size L.
- Tornado Essentials hi viz pants, Size L.
- 4x Jerkin 441 hi viz Safety Vests, all are size L.
Condition - Most items are as new in packaging. A few items are missing packaging and show dust, marks from open storage.
Skylarc Ref E123079
Expected Auction End Time: 28th February 2021 8:30pm
Assorted 3M Branded Safety Hearing Protection, Respirators, & Accessories.
Includes the following 3M items:
- 1x Peltor ProTac III Slim Headset Hearing Protection, Size L.
- 4x sets of Multi Gas Vapor Cartidges type 6006.
- 3x Partial boxes of particulate filters type P2 R, 5925, 28x pairs in total.
- 4x Half mask facepiece respirators type 7002S, Size medium. Note - these Respirators are not compatible with the above included filtering accessories.
Condition - Leftover unused factory stock. Some dust on packaging from storage.
Skylarc Ref D123078
Expected Auction End Time: 28th February 2021 7:59pm
Assorted Welding Leather Safety Apparel & More.
Includes:
- Weldclass Promax BL7 Premium leather jacket, WC-01783, Size XL.
- 2x Weldclass Promax Blue Leather Welders Spats WC-01816.
- Weld Guard Leather Spat Ankle W743328.
- Grey Wolf Eskimo Leather Welding Gloves.
- Fusion Leather Welders Apron EFA-XL.
- Leather Bib Appron.
- 2x Elliotts leather welding pants, Size L and XL.
- Miller Front Lend Covers 153457 for welding helmets.
- 3M Speedglas Front Leather Part BLTS.
- Loose unbagged leather Apron.
- 2x welding helmet replacement components.
Condition - Most items appear to be unused leftover Workshop stock. A few items show varying levels of usage.
Skylarc Ref Z123074
Expected Auction End Time: 28th February 2021 7:42pm
Bata Industrial SafeMate White Safety Gumboots.
Size 10.
Steel toe caps.
Condition - Boots show very minor use marks on soles. Exterior surface grime appear to be from workshop storage. Inner liner appears clean, no odors.
Skylarc Ref Y123073
Expected Auction End Time: 28th February 2021 7:37pm
John Bull 5566 Angus Safety Boots.
Size 10 UK, 11 US.
DDPU exterior material.
Sterl toe caps.
Condition - Boots show very brief use marks with minor marks, minor wear to soles. Inners appear clean with no odor. Some light dust from open storage.
Skylarc Ref X123072
Expected Auction End Time: 28th February 2021 8:11pm
Blundstone 780 TPU/RUB Safety Executive Shoes.
Model 780.
Size 11 UK, 12 US.
Black leather.
Steel toe caps.
Condition - Shoes appear to have been worn very briefly, some very minor signs of usage, inners appear as new, no odors.
Skylarc Ref W123071
Expected Auction End Time: 28th February 2021 7:04pm
Blundstone 780 TPU/RUB Safety Executive Shoes.
Model 780.
Size 9 UK, 10 US.
Black leather.
Steel toe caps.
Condition - Shoes appear to have been worn very briefly, some very minor signs of usage, no apparent wear to soles, inners appear as new, no odors.
Skylarc Ref V123070
Expected Auction End Time: 28th February 2021 6:51pm
Aluminised Kevlar Smock, Size XL, for High Heat Work.
Unknown brand.
Type No. AKS50UXL.
Unlined.
Size = XL
Condition - New in opened manufacturer bag. Bag exterior is dusty from workshop storage
Skylarc Ref S123067
Expected Auction End Time: 28th February 2021 6:48pm
Canon Maxify MB5160 Multifunction Office Printer.
Prints up to A4 size.
4x injet cartidges.
Scan, copy, print, fax.
Total pages printed - 3077 pages.
See photos for current ink levels.
Includes power cord and USB cable.
Some dust on exterior. Appears to print normally.
Skylarc Ref T123068
Expected Auction End Time: 28th February 2021 9:50pm
HP OfficeJet Pro 8610 Desktop Multifunction Printer.
Prints up to A4 size.
Total page count - 6061 pages.
See photos for ink levels remaining.
Includes power cord and USB cable.
Some dust on surfaces.
Skylarc Ref I123057
Expected Auction End Time: 28th February 2021 8:03pm
Vintage Antique Wooden Ladder.
Unknown age.
Ladder is approx 2020mm long, 370mm wide at base and tapers to approx 225mm wide at top.
Wood type unknown, see photos for wood grain details
Condition - Some wood cracks at nail points, ladder still feels sturdy.