Skylarc

Torks - Onsite Auction

4x Pairs of Trolley Castors
4x Pairs of Trolley Castors

Skylarc Ref H125006

Expected Auction End Time: 9th May 2021 8:43pm

4x Pairs of Trolley Castors.
Includes:
- 2x swivel type Castors with 125mm diameter wheels.
- 2x non-swivel Castors with 125mm diameter wheels.
2x non-swivel Castors with 125mm diameter wheels (white/red colour).
- 2x swivel type Castors with 100mm diameter wheels.
All units show previous usage.

Heavy Duty Workbench with Vice
Heavy Duty Workbench with Vice

Skylarc Ref W124891

Expected Auction End Time: 9th May 2021 7:44pm

Steel frame
Timber top with chipboard cover
Record No.5 vice
Three jaws
Contents not included
920mm worktop height

2x Used Electric Induction Motors
2x Used Electric Induction Motors

Skylarc Ref G125005

Expected Auction End Time: 9th May 2021 9:15pm

2x Used Electric Induction Motors.
Includes:
- Kings Bird 1hp, 50Hz, 240V, 5A, single phase, 1500/1720rpm, 4-pole, Manufactured 1978.
- AEI Kapak Motor 1.5hp, 3-phase, 400V, 21A, 850rpm.
Both motors untested. Both units show moderate usage.

Small Steel Trolley
Small Steel Trolley

Skylarc Ref V124890

Expected Auction End Time: 9th May 2021 8:20pm

Steel frame
Heavy duty wheels
MDF top
Contents not included

Small Steel Trolley
Small Steel Trolley

Skylarc Ref U124889

Expected Auction End Time: 9th May 2021 8:37pm

Steel frame
Heavy duty wheels
Timber top
Contents not included

Heavy Duty Workshop Shelving Unit
Heavy Duty Workshop Shelving Unit

Skylarc Ref F125004

Expected Auction End Time: 9th May 2021 8:15pm

Heavy Duty Workshop Shelving Unit.
Heavy duty sterl frame with MDF board shelves.
Vertical spacing between shelves is approx 240mm.
Items seen on and around unit are not included.

3x Small Industrial Gear Boxes & Torque Limiters
3x Small Industrial Gear Boxes & Torque Limiters

Skylarc Ref E125003

Expected Auction End Time: 9th May 2021 9:38pm

3x Small Industrial Gear Boxes & Torque Limiters
Includes:
- STM Spa Type U63, Manufactured in 2012, ratio 1/100, approx 170x105x190mm.
- STM Spa Type AMF2 32/1 M1, Manufactured in 2006, ratio 1/3, approx 140x135x125mm
- Andrews & Beaven NZ Ltd, size J112, ratio 15/1, approx 135x120x120mm.
Condition varies with each unit. All units do turn.

First-X Single Phase Wirecut Machine
First-X Single Phase Wirecut Machine

Skylarc Ref T124888

Expected Auction End Time: 9th May 2021 9:32pm

First-X brand wire cut machine
Reciprocating edm wire cut
Uses Molybdenum wire and water soluble soap
Computer controlled
Digital read out
Approx travels
X axis 480mm
Y axis 280mm
190mm approx head to workpiece
Can cut tapers
Setting block
Box of soap
Small amount of wire
Very rare single phase machine

To see this machine running:
https://youtu.be/hRBXC9FlJMk

Vintage Wooden Workshop Storage Cabinet
Vintage Wooden Workshop Storage Cabinet

Skylarc Ref V124864

Expected Auction End Time: 9th May 2021 9:00pm

Vintage Wooden Workshop Storage Cabinet.
Solid wood board and wood veneer construction.
Wood type unknown, see photos for wood grain details.
Brass door handles and other hardware.
Age of unit is unknown.
Items seen inside on on top of unit are not included.
Condition - Unit shows typical wear and usage, some wood chipping, scratches, wear etc. Would make a great restoration project.

Assorted Mixed Socket Sets, Components, Spanners & More
Assorted Mixed Socket Sets, Components, Spanners & More

Skylarc Ref D125002

Expected Auction End Time: 9th May 2021 9:58pm

Assorted Mixed Socket Sets, Components, Spanners & More.
Includes small incomplete vintage 1/4" and 3/8" combination sockets set with blue metal case.
Red steel tool box (missing its lid) with assorted loose 1/2" Sockets, Breaker Bar, extensions etc. Some units branded Sidchrome, Powerbuilt and Sek.
Includes 3x Loose hand Spanners, one each by Stahlwille, Heyco and Gordon Tools.
See photos for further details on what is included.
Condition varies with each item.

2-Ton Chain Hoist by Elephant
2-Ton Chain Hoist by Elephant

Skylarc Ref C125001

Expected Auction End Time: 9th May 2021 9:31pm

2-Ton Chain Hoist by Elephant.
Made in Japan.
Model L-70

Assorted Pneumatic Components
Assorted Pneumatic Components

Skylarc Ref S124887

Expected Auction End Time: 9th May 2021 7:23pm

Wide range of pneumatic rams
Filter
2 x Pneumatic mini hands

1-Ton Chain Hoist by Beaver Block
1-Ton Chain Hoist by Beaver Block

Skylarc Ref U124863

Expected Auction End Time: 9th May 2021 9:33pm

1-Ton Chain Hoist by Beaver Block.
Load chain diameter 6mm.
Type ABS-1A.

1-Ton Chain Hoist
1-Ton Chain Hoist

Skylarc Ref T124862

Expected Auction End Time: 9th May 2021 8:54pm

1-Ton Chain Hoist.
Unknown manufacturer.

Assorted Pneumatic Components
Assorted Pneumatic Components

Skylarc Ref R124886

Expected Auction End Time: 9th May 2021 7:52pm

Assorted air components
Pair of small unmarked rams
Festo valve block
3 x SMC WIP 18801 WX Cylinders
Assorted small components

2 x Large SMC Pneumatic Rams
2 x Large SMC Pneumatic Rams

Skylarc Ref Q124885

Expected Auction End Time: 9th May 2021 7:48pm

Model: SMC CG1WBN80-60-YAJ2188
C80X60 DA XC10 SPECIAL

Steelcase 3-Compartment Personnel Locker Unit
Steelcase 3-Compartment Personnel Locker Unit

Skylarc Ref W124865

Expected Auction End Time: 9th May 2021 8:27pm

Steelcase 3-Compartment Personnel Locker Unit.
Made in USA by Steelcase.
Doors can be locked with a compatible padlock (padlocks not included).
Condition - Unit shows typical workshop wear and usage. Some denting to panels. One inner floor needs repair. Dirty surfaces.

2 x Festo Pneumatic Rams
2 x Festo Pneumatic Rams

Skylarc Ref P124884

Expected Auction End Time: 9th May 2021 7:04pm

Festo DNC-50-25-PPV-A
Air rams

GMF Pedestal Grinder
GMF Pedestal Grinder

Skylarc Ref O124883

Expected Auction End Time: 9th May 2021 8:10pm

Model: GMF 8" Heavy Duty Grinder Mark 3
8" grinding wheels
Wire brush and grinding wheel fitted
1/2hp single phase motor
2850rpm
On heavy duty steel stand

2x Small Workshop Trolleys
2x Small Workshop Trolleys

Skylarc Ref X124866

Expected Auction End Time: 9th May 2021 9:47pm

2x Small Workshop Trolleys.
Grey unit is approx 580x450x620mm and has wooden storage box in lower shelf.
Red unit is approx 590x460x525mm. Partial wood board top. Buyer can easily add their own shelf boards to unit.
Both units on Castors.

Workbench
Workbench

Skylarc Ref N124882

Expected Auction End Time: 9th May 2021 8:59pm

Steel frame
MDF shelves and top
Contents not included

Workshop Hydraulic Lifting Platform Trolley, Faulty Lifter
Workshop Hydraulic Lifting Platform Trolley, Faulty Lifter

Skylarc Ref Y124867

Expected Auction End Time: 9th May 2021 7:45pm

Workshop Hydraulic Lifting Platform Trolley, Faulty Lifter.
Made in NZ in 1979 by Donaldson Engineering.
Model No. SL50
500kg capacity.
Lifting platform is approx 650x460mm.
Condition - Hydraulics are faulty as platform will not rise when pedal is depressed. Unit shows typical industrial wear and usage.

Lathe Mounted Grinder
Lathe Mounted Grinder

Skylarc Ref L124880

Expected Auction End Time: 9th May 2021 8:56pm

Three phase lathe tool post mounted grinder
200mm grinding wheel
.9kw electric motor
32amp three phase plug
Long cord

Workshop Parts Washer
Workshop Parts Washer

Skylarc Ref Z124868

Expected Auction End Time: 9th May 2021 9:49pm

Workshop Parts Washer.
Unknown manufacturer.
Item shows typical workshop wear and usage.

Milling Machine Indexing Head
Milling Machine Indexing Head

Skylarc Ref J124878

Expected Auction End Time: 9th May 2021 9:12pm

News brand
Made in Japan
150mm chuck
Some plates

Workshop Storage Shelf Unit
Workshop Storage Shelf Unit

Skylarc Ref S124861

Expected Auction End Time: 9th May 2021 7:15pm

Workshop Storage Shelf Unit.
25x25mm Steel box Tubing framewith wood and MDF boards for shelves.
Brackets Welded to back edges to secure to a wall for added stability.
Items seen on unit are not included.

Tool Sharpener
Tool Sharpener

Skylarc Ref I124877

Expected Auction End Time: 9th May 2021 6:57pm

R8 spindle cutter sharpening mount

Workshop Workbench / Storage Cupboard Unit
Workshop Workbench / Storage Cupboard Unit

Skylarc Ref A124869

Expected Auction End Time: 9th May 2021 7:29pm

Workshop Workbench / Storage Cupboard Unit.
Main work surface approx 900mm above floor.
Upper shelf unit approx 320mm above main work surface and is approx 200mm wide.
Top mounted 520x190mm shelf with 10x holes for holding Tool Holders or other items.
4x lower doors covering inner storage space.
Note - Items seen on unit are not included. See our other listings for those items.
Workbench shows typical workshop wear and usage.

Workshop Shelving
Workshop Shelving

Skylarc Ref H124876

Expected Auction End Time: 9th May 2021 8:35pm

Steel frame
MDF shelves
Contents not included

Large Workshop Cabinet
Large Workshop Cabinet

Skylarc Ref G124875

Expected Auction End Time: 9th May 2021 6:11pm

Namco brand two door cabinet
7 adjustable shelves
Contents not included
Front door panel needs screws

Heavy Duty Workbench with Vice
Heavy Duty Workbench with Vice

Skylarc Ref F124874

Expected Auction End Time: 9th May 2021 6:29pm

Steel frame
MDF top and shelves
Record No.5 vice
950mm worktop height
Contents not included

Stainless Workbench
Stainless Workbench

Skylarc Ref E124873

Expected Auction End Time: 9th May 2021 7:43pm

Stainless steel top
Box steel frame
Contents not included

Pallet Racking Shelving
Pallet Racking Shelving

Skylarc Ref D124872

Expected Auction End Time: 9th May 2021 9:00pm

Single bay of capital style racking
12 x crossbeams
2 x uprights
Tombstone fittings
Contents not included
Buyer to dismantle

Workbench
Workbench

Skylarc Ref C124871

Expected Auction End Time: 9th May 2021 9:57pm

Steel frame
MDF top and shelves
890mm worktop height
Contents not included

Assorted Jobber Drill Bits & Thread Tappers
Assorted Jobber Drill Bits & Thread Tappers

Skylarc Ref R124860

Expected Auction End Time: 9th May 2021 6:52pm

Assorted Jobber Drill Bits & Thread Tappers.
5x Evacut Jobber Drill Bits in sizes 2.5mm, 4.2mm, 5.1mm, 6.8mm, 8.5mm.
1x Dormer Jobber Drill in 6.5mm size.
6x Vergnamo pass through hole taps type A15-S in sizes M3, M4, M5 (2x), M10, M12.
1x thread tap T407 MF 10x1.25 6H.
12x Assorted loose tread taps showing various levels of usage.
Condition - Varies with each unit. Some are as new unused while others show a varying level of usage.

5x Assorted Sets of Used Jobber Drill Bits
5x Assorted Sets of Used Jobber Drill Bits

Skylarc Ref Q124859

Expected Auction End Time: 9th May 2021 9:19pm

5x Assorted Sets of Used Jobber Drill Bits.
All sets incomplete, missing some units in each.
Sizes up to 10mm.
Condition varies greatly with each unit.

Assorted Mixed Lot of Lockdown Kit Bolts, Components, & other similar hardware
Assorted Mixed Lot of Lockdown Kit Bolts, Components, & other similar hardware

Skylarc Ref B125000

Expected Auction End Time: 9th May 2021 6:47pm

Assorted Mixed Lot of Lockdown Kit Bolts, Components, & other similar hardware.
Assorted mixed lot of various loose bolts, nuts and other hardware from old Lockdown kits. Includes some loose Jobber Drill Bits, wood bolts, other items, see photos for further details.
Includes plastic container measuring approx 350x300x130mm

Assorted Industrial Springs, Bulk Lot
Assorted Industrial Springs, Bulk Lot

Skylarc Ref P124858

Expected Auction End Time: 9th May 2021 9:16pm

Assorted Industrial Springs, Bulk Lot.
Assorted sizes. Diameters approx 8mm to approx 50mm..
Total count unknown, estimate around 150+ individual units included.
Condition - Unknown if any are used.

Single Phase Drill Press
Single Phase Drill Press

Skylarc Ref B124870

Expected Auction End Time: 9th May 2021 8:26pm

Model: STB STB-16
16mm capacity
Fitted with 8mm Jacobs Chuck
370 watt motor
Single phase
310mm diameter table
Belt drive
12 speed
230 rpm - 2300rpm
Bench mounted

Assorted Magnetic Bases, Stands, Attachments for Dial Gauges
Assorted Magnetic Bases, Stands, Attachments for Dial Gauges

Skylarc Ref G125499

Expected Auction End Time: 9th May 2021 6:30pm

Assorted Magnetic Bases, Stands, Attachments for Dial Gauges.
Vintage Eclipse magnetic Base unit.
One unbranded Weighted Base unit.
2x adjustable gauge support bars for magnetic bases.
2x other types of gauge support brackets, see photos.
Cindition varies with each unit. Some are as new but incomplete while others are vintage old units.

17x Assorted Lathe Boring Bars & Other Milling Bits
17x Assorted Lathe Boring Bars & Other Milling Bits

Skylarc Ref F125498

Expected Auction End Time: 9th May 2021 9:56pm

17x Assorted Lathe Boring Bars & Other Milling Bits.
Diameters range from approx 11mm to 25mm.
See photos for further details on types of Lathe and Milling cutting components and units included.
Condition varies greatly with each unit.

3 x Steel Workshop Trolleys
3 x Steel Workshop Trolleys

Skylarc Ref O124857

Expected Auction End Time: 9th May 2021 6:12pm

Steel framed trolleys
Matched set of three
One with wooden top
Each trolley 570mm long x 445mm x 500mm

12x Assorted Lathe Boring Bars
12x Assorted Lathe Boring Bars

Skylarc Ref E125497

Expected Auction End Time: 9th May 2021 8:19pm

12x Assorted Lathe Boring Bars.
Diameters range from approx 16mm to 34mm.
See photos for details on tip types.
Condition varies greatly with each item.

AmPro Mini Air Angle Die Grinder Kit
AmPro Mini Air Angle Die Grinder Kit

Skylarc Ref D125496

Expected Auction End Time: 9th May 2021 9:34pm

AmPro Mini Air Angle Die Grinder Kit.
Kit No. A6314.
Includes Grinder, Assorted attachments, and case. See photos for further details.

3-Drawer Office File Cabinet
3-Drawer Office File Cabinet

Skylarc Ref C125495

Expected Auction End Time: 9th May 2021 9:48pm

3-Drawer Office File Cabinet.
Faux Wood Laminated MDF construction.
Lockable, keys are missing.
Items seen on and within unit are NOT included.

Office Corner L-Shaped Workstation Desk
Office Corner L-Shaped Workstation Desk

Skylarc Ref Z125492

Expected Auction End Time: 9th May 2021 6:55pm

Office Corner L-Shaped Workstation Desk
Faux Wood and grey surface laminate
Auction includes the two above mentioned units only, all other items seen on and around desk are NOT included.
Condition - Some edging marks on desk, generally mild usage wear.

Office Workstation Desk w/ Side Unit, Mobile Drawer
Office Workstation Desk w/ Side Unit, Mobile Drawer

Skylarc Ref W125489

Expected Auction End Time: 9th May 2021 7:57pm

Office Workstation Desk w/ Side Unit, Mobile Drawer
Faux Wood and grey surface laminate.
Main unit with upper reception-like shelf is approx 1800mm long, 760mm wide, 710mm work surface height. Upper unit rises 395mm above work surface.
Stand-alone side unit approx 1505x490x660mm.
Mobile Drawer unit approx 470x460x580mm.
Auction includes the above mentioned items only, all other items seen on and around desk are NOT included.
Desk and side unit show some surface wear and use.

Office Corner L-Shaped Workstation Desk
Office Corner L-Shaped Workstation Desk

Skylarc Ref Y125491

Expected Auction End Time: 9th May 2021 9:23pm

Office Corner L-Shaped Workstation Desk
Faux Wood and grey surface laminate.
Other items seen on and around desk are NOT included.
Condition - Some edging marks on desk, generally mild usage.

2x Padded Office Reception Chairs
2x Padded Office Reception Chairs

Skylarc Ref V125488

Expected Auction End Time: 9th May 2021 9:40pm

2x Padded Office Reception Chairs.
Wood support legs and arm rests.
Padded seat and ba ks in light grey cloth.
Seat width between arm rests approx 435mm.
Seat height approx 440mm.
Condition - Some fabric staining. One chair has a loose back. Scratches and nicks to wood.

Office Corner L-Shaped Desk Workstation w/ Mobile Drawer
Office Corner L-Shaped Desk Workstation w/ Mobile Drawer

Skylarc Ref U125487

Expected Auction End Time: 9th May 2021 7:44pm

Office Corner L-Shaped Desk Workstation w/ Mobile Drawer
Faux Wood top laminate with grey laminate sides.
Corner monitor stand included.
Includes mobile drawer unit 465x475x580mm.
Other items seen on and near desk are NOT included.
Note - Location of desk is in an upstairs office accessed by a narrow stairway with a sharp corner. Buyer should come with extra hands and tools to assist in removable and/or possible disassembly of unit to remove it from building

Office Corner L-Shaped Workstation Desk w/ Drawer Unit
Office Corner L-Shaped Workstation Desk w/ Drawer Unit

Skylarc Ref T125486

Expected Auction End Time: 9th May 2021 9:18pm

Office Corner L-Shaped Workstation Desk w/ Drawer Unit.
Faux Wood Laminated MDF top with black Laminated MDF sides.
Desk surface approx 705mm above floor.
Includes matching desktop mounted Shelving Unit rising 900mm above desk surface.
Includes matching 3-drawer storage unit approx 705x485x695mm.
Other items seen on desk and Shelving are not included.
Note - Location of desk is an upstairs office accessed by a narrow stairway with a sharp corner. Buyer should come with extra hands/ tools to assist in removable and/or possible disassembly of unit to remove it from building.

Mobile Office Computer Workstation Desk
Mobile Office Computer Workstation Desk

Skylarc Ref S125485

Expected Auction End Time: 9th May 2021 9:22pm

Mobile Office Computer Workstation Desk
Faux Wood Laminated MDF construction.
Desk surface is approx 725mm above floor.
Lower keyboard tray.
Cubby for mounting Desktop Computer tower.
Adjustable Monitor shelf.
Mounted on Castors.
Other items seen on and around desk are NOT included.
Buyer should bring extra hands in removing unit from 1st floor location.

Office Corner L-Shaped Desk Workstation w/ Shelf Unit
Office Corner L-Shaped Desk Workstation w/ Shelf Unit

Skylarc Ref Q125483

Expected Auction End Time: 9th May 2021 8:12pm

Office Corner L-Shaped Desk Workstation w/ Shelf Unit
Faux Wood Laminated MDF construction.
Desk surface approx 705mm above floor.
Shelf Unit rises approx 1000mm above desk surface and is approx 1650mm long, 355mm wide.
Note - Location of desk is in an upstairs office accessed by a narrow stairway with a sharp corner. Buyer should come with extra hands and tools to assist in removable and/or possible disassembly of unit to remove it from building

Pallet Racking Shelving
Pallet Racking Shelving

Skylarc Ref M124855

Expected Auction End Time: 9th May 2021 7:03pm

Capital style racking
4 cross beams
2 uprights
Tombstone fittings
Crossbeams have been shortend
Contents not included

Pedestal Grinder
Pedestal Grinder

Skylarc Ref L124854

Expected Auction End Time: 9th May 2021 8:35pm

Model: SB-200
Single phase
3/4 hp motor
Only one side has wheel
Other side shaft is covered

Workshop Table
Workshop Table

Skylarc Ref K124853

Expected Auction End Time: 9th May 2021 7:28pm

MDF top
Steel frame
Contents not included

Workshop Table
Workshop Table

Skylarc Ref R124834

Expected Auction End Time: 9th May 2021 7:05pm

MDF top
Steel frame
Contents not included

Standard Office Shelving Unit
Standard Office Shelving Unit

Skylarc Ref P125482

Expected Auction End Time: 9th May 2021 8:56pm

Standard Office Shelving Unit.
MDF construction with a cream colour painted finish.
Non-adjustable Shelving.

Duplomatic Lathe Pantograph
Duplomatic Lathe Pantograph

Skylarc Ref J124852

Expected Auction End Time: 9th May 2021 7:20pm

Model: Duplomatic model T 75
Consists of three phase hydraulic power pack
Arm
Mounting rail
Unknown condition or completeness

Standard Office Storage Cabinet
Standard Office Storage Cabinet

Skylarc Ref O125481

Expected Auction End Time: 9th May 2021 6:09pm

Standard Office Storage Cabinet.
White laminate surfaces.
3x Adjustable shelves.
Buyer should bring extra hands in removing unit from 1st floor location.

4-Door Office Storage Cupboard
4-Door Office Storage Cupboard

Skylarc Ref N125480

Expected Auction End Time: 9th May 2021 9:55pm

4-Door Office Storage Cupboard.
Light grey laminate surfaces.
Four doors with two inner compartments.
One adjustable shelf in each compartment
Doors lockable, keys are missing.
Some surface wear and use marks.

Haas CNC Rotary Table
Haas CNC Rotary Table

Skylarc Ref I124851

Expected Auction End Time: 9th May 2021 7:24pm

Model: Haas SHP T210H
210mm rotary table
Formerly used on Haas VF2SS

To see this machine running:
https://youtu.be/d3UjXuBA_R4

Haas CNC Rotary Table
Haas CNC Rotary Table

Skylarc Ref H124850

Expected Auction End Time: 9th May 2021 7:24pm

Model: Haas HRT210
210mm rotary table
Formerly used on Haas VF2SS

To see this machine running:
https://youtu.be/JLq2rcyoICE

Small Corner L-Shaped Office Desk Workstation
Small Corner L-Shaped Office Desk Workstation

Skylarc Ref M125479

Expected Auction End Time: 9th May 2021 7:01pm

Small Corner L-Shaped Office Desk Workstation.
Light grey laminated top with dark grey laminate sides.
Adjustable keyboard section.
Note - Location of desk is in an upstairs office accessed by a narrow stairway with a sharp corner. Buyer should come with extra hands and tools to assist in removable and/or possible disassembly of unit to remove it from building.

Vintage Maco Adjustable Template Tool w/ Box + 2nd Tool
Vintage Maco Adjustable Template Tool w/ Box + 2nd Tool

Skylarc Ref L125478

Expected Auction End Time: 9th May 2021 6:05pm

Vintage Maco Adjustable Template Tool.
Made in England.
Model number unknown.
Brass and steel construction.
Includes original box. Box shows damage and wear from age.
Includes a second smaller template tool made in Japan, its manufacturer is unknown.

Mitutoyo Imperial Micrometer Set
Mitutoyo Imperial Micrometer Set

Skylarc Ref G124849

Expected Auction End Time: 9th May 2021 6:36pm

6 micrometers
6"-7"
7"-8"
8"-9"
9"-10"
10"-11" (note has been dropped)
11"-12"
Box of test blocks
Wooden case

Desoutter Pneumatic Air Die Grinder
Desoutter Pneumatic Air Die Grinder

Skylarc Ref K125477

Expected Auction End Time: 9th May 2021 9:26pm

Desoutter Pneumatic Air Die Grinder.
Unable to find model number on unit.
Made in England.

Kaeser Rotary Screw Workshop Compressor
Kaeser Rotary Screw Workshop Compressor

Skylarc Ref Q124833

Expected Auction End Time: 9th May 2021 9:10pm

Model: Kaeser Sigma Aircentre SM 12
7.5kw motor
Max pressure 8 bar
26264 operating hours
Integrated AB12 air cooler dryer
Three phase
Full service history on machine

2x Indexable Mill Cutters
2x Indexable Mill Cutters

Skylarc Ref J125476

Expected Auction End Time: 9th May 2021 9:26pm

2x Indexable Mill Cutters.
One unit is Kennametal type 25A03R032A25ED10, I9LH03.
Second unit has no visible ID markings, approx 20mm cutting diameter.
Both units show wear and usage. Shank of Kennametal unit has been modified, see photos.

Automatic Air Hose Reel
Automatic Air Hose Reel

Skylarc Ref P124832

Expected Auction End Time: 9th May 2021 6:37pm

Retracting hose reel
On wall mount

Jetfire Diesel Kerosene Heater
Jetfire Diesel Kerosene Heater

Skylarc Ref O124831

Expected Auction End Time: 9th May 2021 7:41pm

Model: Jetfire DI27
Single phase and diesel powered
27.5kw heat output
On wheels

To see this machine running:
https://youtu.be/RRn7Rrbg3J8

Set of Steel Parallels
Set of Steel Parallels

Skylarc Ref I125475

Expected Auction End Time: 9th May 2021 6:23pm

Set of Steel Parallels.
Each is 100x40x16mm.

8x Assorted Individual Steel Parallel Units
8x Assorted Individual Steel Parallel Units

Skylarc Ref H125474

Expected Auction End Time: 9th May 2021 8:16pm

8x Assorted Individual Steel Parallel Units.
There are no matching parallel sets in this auction, each unit is a single piece missing its twin.
Approx sizes include:
- 140x45x45mm.
- 164x54x18.2mm.
- 150x59x20mm.
- 127x31.7x31.5mm.
- 265x18x18mm.
- 119x38.2x25.3mm.
- 161x22.8x14.2mm.
- 112.5x20.5x14.2mm.
Condition varies with each unit.

Charme Spark Eroder Machine
Charme Spark Eroder Machine

Skylarc Ref N124830

Expected Auction End Time: 9th May 2021 8:28pm

Model: Charme EDM CM-110DT Spark Eroder
Charme Pulse CD-30M control panel
Heidenhain VRZ 710 digital read out
500mm x 250mm T slot table
Nose to table max 430mm
Three phase
Dielectric fluid bath dimensions 700mm x 410mm x 325mm
Manufactured 1986
Approx half a barrel dielectric fluid
Manuals
Some accessories
Machine last run about a year ago was put in to storage in running condition.

Assorted Mill Cutters, Bits, w/ Wood Holders & More
Assorted Mill Cutters, Bits, w/ Wood Holders & More

Skylarc Ref F124848

Expected Auction End Time: 9th May 2021 9:45pm

Assorted Mill Cutters, Bits, w/ Wood Holders & More.
29x assorted type of Milling Cutters in assorted sizes, see photos for details on type of Cutters included.
Includes 3x Torx drivers.
Includes two wood block drill bit/cutter holders.
Condition varies greatly with each unit. Some appear unused while others show varying levels of usage. Wood blocks show grime and wear from workshop use.

Haas Super VF 2SS Vertical Machining Centre
Haas Super VF 2SS Vertical Machining Centre

Skylarc Ref G125473

Expected Auction End Time: 9th May 2021 7:13pm

Model: Haas Super VF-2SS
Manufactured 2007
Three phase
Haas controller
Software version M15.05A
Table dimensions 910mm x 355mm
Table travels
X 761mm
Y 412mm
Z 502mm
Spindle to table max: 610mm min: 102mm
22kw main spindle motor
Max weight on table 680kg
24 tool carousel
High speed tool changer
BT40 spindle taper
12000rpm max spindle speed
Wired for fourth axis
Renishaw OMP 40-2 radio probe
Renishaw OTS radio tool setter
Chip conveyor
Micro-Drop MD-1200 MQL system
Manuals
Serial number 1062334
Machine displays an error on startup which means the machine requires repowering to run
Approx 4000kg

To see this machine running:
https://youtu.be/OF1J3LdIrtY

Hand Punch Tool Kit w/ Case
Hand Punch Tool Kit w/ Case

Skylarc Ref C124845

Expected Auction End Time: 9th May 2021 7:58pm

Hand Punch Tool Kit w/ Case.
Unknown manufacturer and model.
Metric and Imperial insert sizing.
Includes plastic case.

Moore & Wright 1" Precision Depth Guage w/ Attachments & Wood Case
Moore & Wright 1" Precision Depth Guage w/ Attachments & Wood Case

Skylarc Ref B124844

Expected Auction End Time: 9th May 2021 6:49pm

Moore & Wright 1" Precision Depth Guage w/ Attachments & Wood Case.
Model No. 53
Made in England
Age of unit unknown. Wood case shows Workshop wear and grime, one latch is missing on case.

Haas Super VF 2SS Vertical Machining Centre
Haas Super VF 2SS Vertical Machining Centre

Skylarc Ref L124828

Expected Auction End Time: 9th May 2021 9:45pm

Model: Haas Super VF-2SS
Manufactured 2007
Three phase
Haas controller
Software version M15.05A
Table dimensions 910mm x 355mm
Table travels
X 761mm
Y 412mm
Z 502mm
Spindle to table max: 610mm min: 102mm
22kw main spindle motor
Max weight on table 680kg
24 tool carousel
High speed tool changer
BT40 spindle taper
12000rpm max spindle speed
Wired for fourth axis
Renishaw OMP 40-2 radio probe
Chip conveyor
Manuals
Serial number 1057845
Exceptionally tidy machine ready to go
Approx 4000kg

To see this machine running:
https://youtu.be/S8l1FczWVgA

Pair of Steel Parallels
Pair of Steel Parallels

Skylarc Ref Z124842

Expected Auction End Time: 9th May 2021 9:54pm

Pair of Steel Parallels.
Each is 231mm long, Tapered angled sides, see photos. Thickest side approx 8.2mm.

Mitutoyo 300mm Analog Dial Caliper w/ Case
Mitutoyo 300mm Analog Dial Caliper w/ Case

Skylarc Ref W124839

Expected Auction End Time: 9th May 2021 7:22pm

Mitutoyo 300mm Analog Dial Caliper w/ Case.
Made in Japan.
Model number unknown.
Includes Padded case.
Dial not at zero when jaws fully closed, might need calibration.

2x HSS Annular Milling Cutters, 33mm & 35mm Dia
2x HSS Annular Milling Cutters, 33mm & 35mm Dia

Skylarc Ref U124837

Expected Auction End Time: 9th May 2021 7:29pm

2x HSS Annular Milling Cutters, 33mm & 35mm Dia.
Includes:
- Bordo HSS Annular Cutter, 33mm dia, 25mm cut depth, 3/4" shank size.
- Hougen DOC Rotalock Plus Cutter, 35mm Dia, 25mm cut depth.
Both units show varying levels of usage, see photos for details.

Kennametal Milling Cutter M4D050Z05S22LN15 w/ NT30 Mount
Kennametal Milling Cutter M4D050Z05S22LN15 w/ NT30 Mount

Skylarc Ref T124836

Expected Auction End Time: 9th May 2021 8:43pm

Kennametal Milling Cutter type M4D050Z05S22LN15.
Uses MS-2071 Inserts.
Includes attached NT30 mount.

Golden Goose 13mm Keyless Chuck w/ NT30 Machine Mount
Golden Goose 13mm Keyless Chuck w/ NT30 Machine Mount

Skylarc Ref S124835

Expected Auction End Time: 9th May 2021 7:46pm

Golden Goose 13mm Keyless Chuck w/ NT30 Machine Mount.

Schleuniger Wavy Parallels
Schleuniger Wavy Parallels

Skylarc Ref F125472

Expected Auction End Time: 9th May 2021 9:46pm

Wavy parallels
115mm long
9mm - 23mm thick
Some are damaged

Assorted Clamps
Assorted Clamps

Skylarc Ref V125462

Expected Auction End Time: 9th May 2021 9:15pm

Three jig clamps
One mounted on steel frame

Titanic Milling Machine Chuck
Titanic Milling Machine Chuck

Skylarc Ref X115897

Expected Auction End Time: 9th May 2021 7:39pm

Titanic chuck
4 collets
Adapters
Wrench
In foam case

Assorted Letter and Number Punches
Assorted Letter and Number Punches

Skylarc Ref C125469

Expected Auction End Time: 9th May 2021 7:02pm

6mm letters and numbers
2mm numbers
4mm numbers
3mm letters

Letter and Number Punches
Letter and Number Punches

Skylarc Ref B125468

Expected Auction End Time: 9th May 2021 6:09pm

3mm numbers
3mm letters
6mm letters

Assorted Letter and Number Punches
Assorted Letter and Number Punches

Skylarc Ref A125467

Expected Auction End Time: 9th May 2021 8:09pm

Set of 6mm letters
Set of 4mm letters
Set of 4mm numbers
Set of 5mm numbers

3 Partial Mill Lockdown Kits
3 Partial Mill Lockdown Kits

Skylarc Ref Z125466

Expected Auction End Time: 9th May 2021 7:34pm

Mill Lockdown Kits
Some components missing
All with 25mm T nuts

Homge Milling Machine Vice
Homge Milling Machine Vice

Skylarc Ref Y125465

Expected Auction End Time: 9th May 2021 6:46pm

155mm wide jaws
100mm max opening
Removable handle

Large Milling Machine Vice
Large Milling Machine Vice

Skylarc Ref X125464

Expected Auction End Time: 9th May 2021 9:12pm

Heavy duty mill vice
205mm wide jaws
200mm max opening

Set of Four Matched Angled Parallels
Set of Four Matched Angled Parallels

Skylarc Ref U125461

Expected Auction End Time: 9th May 2021 7:26pm

Each 400mm long x 60mm thick x 120mm tall high end 20mm low end

Large Lot of Assorted Cutters
Large Lot of Assorted Cutters

Skylarc Ref T125460

Expected Auction End Time: 9th May 2021 7:29pm

20 cutters total
Largest 150mm
Smallest 75mm
Some have damaged teeth

Milling Machine Rotary Table
Milling Machine Rotary Table

Skylarc Ref S125459

Expected Auction End Time: 9th May 2021 8:00pm

Unknown brand
250mm diameter table

Adjustable Angle Milling Machine Vice
Adjustable Angle Milling Machine Vice

Skylarc Ref R125458

Expected Auction End Time: 9th May 2021 6:44pm

100mm jaws
80mm max opening
Removable handle
Swivel and tilting base

Milling Machine Vice
Milling Machine Vice

Skylarc Ref P125456

Expected Auction End Time: 9th May 2021 6:31pm

K.K.K. brand
160mm wide jaws
130mm max opening
Removable handle

Milling Machine 90 Degree Head
Milling Machine 90 Degree Head

Skylarc Ref M125453

Expected Auction End Time: 9th May 2021 9:08pm

Kondia 90 degree head
R8 spindle taper both input and output
With arbor and mount

Cast Machine Table
Cast Machine Table

Skylarc Ref L125452

Expected Auction End Time: 9th May 2021 9:21pm

Heavy duty machine table
Ex milling machine or similar
3 x T slots 32mm x 1365mm

Wooden Workbench with Vice
Wooden Workbench with Vice

Skylarc Ref K125451

Expected Auction End Time: 9th May 2021 9:07pm

Heavy duty steel frame
Timber top
Protective cover of chipboard
125mm vice
910mm worktop height
Three drawers

Heavy Duty Workbench with Vice
Heavy Duty Workbench with Vice

Skylarc Ref M124829

Expected Auction End Time: 9th May 2021 7:58pm

Timber frame and top
Chipboard protective cover on worktop
920mm worktop height
Record No.5 vice
Wooden drawer with dividers

Large Lot of Hand Tools
Large Lot of Hand Tools

Skylarc Ref K124827

Expected Auction End Time: 9th May 2021 6:10pm

25 assorted screwdrivers
2 hammers
Mallet
13 files
2 Spanners
Ruller

4 x Clarkson Cutters
4 x Clarkson Cutters

Skylarc Ref J125450

Expected Auction End Time: 9th May 2021 8:56pm

Clarkson 3", 2 1/2", 1 3/4", 1 1/2"
With arbor

Large Lot of Small Mill Cutters
Large Lot of Small Mill Cutters

Skylarc Ref I125449

Expected Auction End Time: 9th May 2021 9:26pm

37 assorted mill cutters
Assorted types
Largest size 16mm
Smallest size 1/16"

5 Large End Mills
5 Large End Mills

Skylarc Ref H125448

Expected Auction End Time: 9th May 2021 8:21pm

5 x 3/4" end mills

NT40 Tool Holder
NT40 Tool Holder

Skylarc Ref G125447

Expected Auction End Time: 9th May 2021 7:29pm

NT40 to 38mm OD thread

3 x BT40 Tool Holders
3 x BT40 Tool Holders

Skylarc Ref F125446

Expected Auction End Time: 9th May 2021 7:45pm

BT40 25mm holder
2 x BT40 20mm holders
With pull studs

Assorted Drill Chucks
Assorted Drill Chucks

Skylarc Ref E125445

Expected Auction End Time: 9th May 2021 6:12pm

Niraw JT6 13mm chuck
JT6 13mm chuck
13mm chuck MT3 - 20mm adapter (does not fit these chucks)

Assorted NT32 Mill Tooling
Assorted NT32 Mill Tooling

Skylarc Ref D125444

Expected Auction End Time: 9th May 2021 7:30pm

5 x NT32 tool holders
101.6mm diameter cutting wheel
Morse taper No.2 to NT32 taper adapter
7mm radius cutter
37.8mm threaded holder
91.5mm face cutter missing one insert and holder

Cutter on R8 Taper
Cutter on R8 Taper

Skylarc Ref C125443

Expected Auction End Time: 9th May 2021 7:51pm

4 x 1/8" x 1" cutting wheel
R8 tool holder

3 x Large Fluted End Mills
3 x Large Fluted End Mills

Skylarc Ref Z115899

Expected Auction End Time: 9th May 2021 9:33pm

3/4" (looks to have been cut down)
3/4"
25mm
With cases

Boxes of Machine Tool Tips
Boxes of Machine Tool Tips

Skylarc Ref B125442

Expected Auction End Time: 9th May 2021 8:45pm

5 x partial boxes of machine tool tips

Assorted Tool Tips
Assorted Tool Tips

Skylarc Ref A125441

Expected Auction End Time: 9th May 2021 7:27pm

8 part boxes of machine tool tips

Iscar Insert Drill
Iscar Insert Drill

Skylarc Ref Z125440

Expected Auction End Time: 9th May 2021 7:07pm

Iscar ER D15A25-2-C25-10
in case

Shardlow 2" - 6" Micrometer
Shardlow 2" - 6" Micrometer

Skylarc Ref Y125439

Expected Auction End Time: 9th May 2021 8:02pm

Shardlows Micrometers Ltd
2" - 6" capacity
With rods and test blocks
In case

Large Lot of Milling Cutters
Large Lot of Milling Cutters

Skylarc Ref X125438

Expected Auction End Time: 9th May 2021 6:48pm

72 Cutters total
Largest size 25mm
Smallest size 0.75
Mostly bull nose end mills

Assorted Reamers and Drills
Assorted Reamers and Drills

Skylarc Ref W125437

Expected Auction End Time: 9th May 2021 9:25pm

3 x 7/32" new reamers
TEC P337 79 No.1 MT
39/64" long drill bit No.2 MT
2 x 5/8" long reamers No.2 MT
13/16" spiral reamer
2 x 27/32" spiral reamer
19.5mm drill bit on No.3 MT adapter

3 x Reamers
3 x Reamers

Skylarc Ref V125436

Expected Auction End Time: 9th May 2021 6:27pm

Unbranded 28mm
TEC T/1872 (new)
TEC T/1875
No.2 MT

4 x Reamers
4 x Reamers

Skylarc Ref U125435

Expected Auction End Time: 9th May 2021 8:03pm

TEC Reamers
3 x T/T 1870/4
T/T 1870/3
No.2 MT

3 x TEC Reamers
3 x TEC Reamers

Skylarc Ref T125434

Expected Auction End Time: 9th May 2021 8:19pm

TEC Reamers
T/T 1870/3
2 x T/T 1870/4
Mt.2

3 x Reamers
3 x Reamers

Skylarc Ref S125433

Expected Auction End Time: 9th May 2021 7:55pm

Somta 25mm No.3 MT
TEC T-T-1870-4 No.2 MT
TEC T/T-1870-4 No.2 MT

7 x End Mills
7 x End Mills

Skylarc Ref R125432

Expected Auction End Time: 9th May 2021 6:59pm

Sizes include
16mm, 18.5mm, 5/8", 18mm, 16mm, 14mm, 15mm, 15mm, 16mm

4 x Insert Drills
4 x Insert Drills

Skylarc Ref J124826

Expected Auction End Time: 9th May 2021 9:55pm

Fette 20x10xM10/10.5
Unbranded 24mm
Unbranded 32mm

2 x Milling Machine Face Cutters
2 x Milling Machine Face Cutters

Skylarc Ref I124825

Expected Auction End Time: 9th May 2021 7:47pm

Seco R220.13-C050-12
Unbranded 61.5mm outer diameter cutter

2 x Milling Face Cutters
2 x Milling Face Cutters

Skylarc Ref H124824

Expected Auction End Time: 9th May 2021 9:05pm

Seco R220.43-0063-05
Missing one insert
Iscar FCM-D063-22-1

Boring and Facing Head
Boring and Facing Head

Skylarc Ref Q125431

Expected Auction End Time: 9th May 2021 6:48pm

Model: F213A
Universal boring and facing head
Max facing/boring diameter 350mm
22mm tool post holes
Self-acting feed per revolution
0.03, 0.06, 0.09, 0.12, 0.15,0.18
NT40 spindle
Range of accessories
In cases

Targa Single Phase Surface Grinder
Targa Single Phase Surface Grinder

Skylarc Ref Y115898

Expected Auction End Time: 9th May 2021 8:47pm

Model: Targa 612 Surface Grinder
300mm x 150mm magnetic chuck
3/4hp electric motor
180mm wheel diameter
Max height wheel to chuck 170mm
Manufactured 1983
Bench mount machine
On heavy duty steel stand
Awesome home workshop machine rarely available in single phase

BIG BT40 High Speed Spindle
BIG BT40 High Speed Spindle

Skylarc Ref P125430

Expected Auction End Time: 9th May 2021 7:59pm

Model: BIG New High Speed Spindle BT40-NEW XG5D
NP10 collet chuck

Mitutoyo Vernier Caliper
Mitutoyo Vernier Caliper

Skylarc Ref O125429

Expected Auction End Time: 9th May 2021 7:02pm

30cm/12" vernier caliper
Mechanical dial
Face cover needs replacement
In case

ABC Adjustable Boring Head
ABC Adjustable Boring Head

Skylarc Ref V115895

Expected Auction End Time: 9th May 2021 7:52pm

ABC adjustable boring head
85mm diameter
Adjustable angle and offset
NT30 and R8 spindles
Range of tooling
Wooden box

Drill Chuck
Drill Chuck

Skylarc Ref W115896

Expected Auction End Time: 9th May 2021 6:53pm

Jacobs Chuck No.34
1mm - 13mm capacity
No.2 morse taper
No key

13mm Drill Chuck
13mm Drill Chuck

Skylarc Ref U115894

Expected Auction End Time: 9th May 2021 9:11pm

Jacobs Chuck No.34
1-13mm
With key
No.3 morse taper shaft

Keyless Chuck
Keyless Chuck

Skylarc Ref T115893

Expected Auction End Time: 9th May 2021 7:39pm

1/8" - 5/8" keyless chuck
No. 3 morse taper shaft

Archer Tapping Chuck
Archer Tapping Chuck

Skylarc Ref R115891

Expected Auction End Time: 9th May 2021 6:22pm

Model: Archer No.1 Tapper
No.2 morse taper shaft

Archer Tapping Chuck
Archer Tapping Chuck

Skylarc Ref S115892

Expected Auction End Time: 9th May 2021 6:41pm

Model: Archer No.2 Tapper
No.2 morse taper shaft

Adjustable Boring and Facing Head
Adjustable Boring and Facing Head

Skylarc Ref O115888

Expected Auction End Time: 9th May 2021 9:03pm

News Boring Head
Fitted with 32mm x 80mm boring bar
R8 spindle taper
Precision adjustable

Clarkson Autolock Chuck
Clarkson Autolock Chuck

Skylarc Ref N125428

Expected Auction End Time: 9th May 2021 9:35pm

NT30 spindle taper
Range of collets
2 x FC tool adapters
In case

BT40 Tool Holder with Endmill
BT40 Tool Holder with Endmill

Skylarc Ref Q115890

Expected Auction End Time: 9th May 2021 6:44pm

Tool holder with 16mm shaft
16mm end mill

NT40 Drill Chuck
NT40 Drill Chuck

Skylarc Ref P115889

Expected Auction End Time: 9th May 2021 8:42pm

Tool holder LAIP 010550218
ROHM 1-16mm P J6 S3 drill chuck

NT40 Collet Chuck
NT40 Collet Chuck

Skylarc Ref N115887

Expected Auction End Time: 9th May 2021 9:59pm

NT40 ER40 collet chuck
40xER40-90

NT40 Adjustable Tool Holder
NT40 Adjustable Tool Holder

Skylarc Ref M125427

Expected Auction End Time: 9th May 2021 9:37pm

Adjustable tool holder
Has adapter fitted 16mm
25mm shaft

NT40 Collet Chuck
NT40 Collet Chuck

Skylarc Ref M115886

Expected Auction End Time: 9th May 2021 8:04pm

NT40 ER40 collet chuck

BT40 Tool Holder with Face Cutter
BT40 Tool Holder with Face Cutter

Skylarc Ref L115885

Expected Auction End Time: 9th May 2021 6:32pm

Kojex BT40 Tool Holder
BT-40-FMC27-60
90mm diameter insert face cutter

NT40 Collet Chuck
NT40 Collet Chuck

Skylarc Ref K115884

Expected Auction End Time: 9th May 2021 6:54pm

ER40 collet chuck

NT40 to MT.3 Tool Holder
NT40 to MT.3 Tool Holder

Skylarc Ref J115883

Expected Auction End Time: 9th May 2021 8:29pm

NT40 to morse taper No.3 taper adapter

NT40 Tool Holder
NT40 Tool Holder

Skylarc Ref I115882

Expected Auction End Time: 9th May 2021 7:10pm

40x20-63

NT40 Collet Chuck
NT40 Collet Chuck

Skylarc Ref Y115872

Expected Auction End Time: 9th May 2021 9:14pm

ER40 collet chuck
LAIP 0405060207

NT40 Tool Holder
NT40 Tool Holder

Skylarc Ref H115881

Expected Auction End Time: 9th May 2021 9:20pm

AW NT40-SLA12-55

NT40 Collet Chuck
NT40 Collet Chuck

Skylarc Ref G115880

Expected Auction End Time: 9th May 2021 7:30pm

ER40 collet chuck
40xER40-90

BT40 Collet Chuck
BT40 Collet Chuck

Skylarc Ref F115879

Expected Auction End Time: 9th May 2021 9:00pm

ER40 collet chuck
LAIP 0405060207

BT40 Tool Holder
BT40 Tool Holder

Skylarc Ref E115878

Expected Auction End Time: 9th May 2021 9:36pm

Coromant tool holder
10mm shaft

NT40 Collet Chuck
NT40 Collet Chuck

Skylarc Ref D115877

Expected Auction End Time: 9th May 2021 7:36pm

ER32 collet chuck

BT40 Tool Holder
BT40 Tool Holder

Skylarc Ref C115876

Expected Auction End Time: 9th May 2021 8:02pm

18mm shaft

NT40 Collet Chuck
NT40 Collet Chuck

Skylarc Ref B115875

Expected Auction End Time: 9th May 2021 9:29pm

NT32 collet chuck

BT40 Adjustable Tool Holder
BT40 Adjustable Tool Holder

Skylarc Ref A115874

Expected Auction End Time: 9th May 2021 6:37pm

Adjustable tool holder
30mm shaft diameter

Kojex BT40 Tool Holder
Kojex BT40 Tool Holder

Skylarc Ref X115871

Expected Auction End Time: 9th May 2021 7:33pm

Kojex BT40-SL32-90

NT40 Collet Chuck
NT40 Collet Chuck

Skylarc Ref W115870

Expected Auction End Time: 9th May 2021 9:44pm

ER40 collet chuck
40xER40-90

NT40 Collet Chuck
NT40 Collet Chuck

Skylarc Ref V115869

Expected Auction End Time: 9th May 2021 9:16pm

ER40 collet chuck
LAIP 0405060207

BT40 Tapping Chuck
BT40 Tapping Chuck

Skylarc Ref U115868

Expected Auction End Time: 9th May 2021 9:43pm

Kojex BT40-WER32-100
32mm tapping collet chuck

NT40 Tool Holder
NT40 Tool Holder

Skylarc Ref T115867

Expected Auction End Time: 9th May 2021 7:46pm

40x20-63

BT40 Tool Holder
BT40 Tool Holder

Skylarc Ref S115866

Expected Auction End Time: 9th May 2021 6:04pm

Kojex BT40-JTA6-45

BT40 Tool Holder
BT40 Tool Holder

Skylarc Ref R115865

Expected Auction End Time: 9th May 2021 6:17pm

Kojex BT40-JTA6-45

BT40 Tool Holder
BT40 Tool Holder

Skylarc Ref Q115864

Expected Auction End Time: 9th May 2021 9:12pm

Kojex BT40-JTA6-45
With pull stud

NT40 Tool Holder
NT40 Tool Holder

Skylarc Ref P115863

Expected Auction End Time: 9th May 2021 8:17pm

NT40-SL12-55

NT40 Tool Holder
NT40 Tool Holder

Skylarc Ref O115862

Expected Auction End Time: 9th May 2021 6:54pm

LAIP-010505024

NT40 Tool Holder
NT40 Tool Holder

Skylarc Ref N115861

Expected Auction End Time: 9th May 2021 7:00pm

SX40SLA32-85

NT40 Tool Holder
NT40 Tool Holder

Skylarc Ref M115860

Expected Auction End Time: 9th May 2021 7:25pm

NT40-SL16-63
With pull stud

NT40 Tool Holder
NT40 Tool Holder

Skylarc Ref L115859

Expected Auction End Time: 9th May 2021 6:41pm

NT40-SL6-50

BT40 Tool Holder
BT40 Tool Holder

Skylarc Ref K115858

Expected Auction End Time: 9th May 2021 8:36pm

Kojex BT40-JTA6-45

Skoda Lathe Live Center
Skoda Lathe Live Center

Skylarc Ref G125421

Expected Auction End Time: 9th May 2021 8:05pm

Model: Skoda 3-0SN243324
No.3 morse taper

Dyco Single Phase Bandsaw
Dyco Single Phase Bandsaw

Skylarc Ref F125420

Expected Auction End Time: 9th May 2021 6:35pm

Dyco bandsaw
Single phase
Table dimensions 405mm x 405mm
Cast iron tilting table
Max throat height 160mm
Large capacity, 470mm blade to body
Built in ideal blade welder
Spare blade
Awesome little home workshop machine

Matco Hydraulic Materials Handler
Matco Hydraulic Materials Handler

Skylarc Ref E125419

Expected Auction End Time: 9th May 2021 7:21pm

Model: Matco 300/72
363kg lifting capacity
780mm long forks
640mm max fork speration
Max height 1829mm

Operates but forks slowly lower

Team Mechanix Engine Crane
Team Mechanix Engine Crane

Skylarc Ref D125418

Expected Auction End Time: 9th May 2021 9:48pm

Team Mechanix 2 ton engine crane
Mutiposition boom
Extension legs
Hydraulic

John Heine Fly Press
John Heine Fly Press

Skylarc Ref C125417

Expected Auction End Time: 9th May 2021 7:50pm

Unknown model
Bed dimensions 355mm x 280mm
930mm long handle
On heavy duty steel stand

Kondia CNC Powermill (Faulty)
Kondia CNC Powermill (Faulty)

Skylarc Ref B125416

Expected Auction End Time: 9th May 2021 8:37pm

Model: Kondia K-600 Powermill
Table dimensions 1200mm x 360mm
Spindle speeds 100-4000rpm
5.5kw main spindle motor
Table travel
X axis 600mm
Y axis 350mm
Z axis 140mm
Heidenhain CNC controller
NT40 spindle taper
Three phase
Has a faulty controller board
Part number Yaskawa CACR-SR10BE12F-E

Induma Three Phase Turret Milling Machine
Induma Three Phase Turret Milling Machine

Skylarc Ref Z125414

Expected Auction End Time: 9th May 2021 8:30pm

Model: Induma 1S/43
Table work area 1680mm x 230mm
3 x 16mm T slots
Table travel
X axis 700mm
Y axis 230mm
Z axis 400mm
Spindle to table max 410mm
8 Spindle speeds
65rpm - 2200rpm
Spindle motor 2hp
12 table feeds
Power feeds all axis
Heidenhain VRZ 731B Digital read out
Manual

To see this machine running:
https://youtu.be/Rr31HNShKx8

Venture Three Phase Gear Head Drill
Venture Three Phase Gear Head Drill

Skylarc Ref Y125413

Expected Auction End Time: 9th May 2021 9:18pm

Model: Martin Manufacturing Venture
Three phase 2hp motor
9 speeds
Forward and reverse
75rpm - 2450rpm
550mm x 440mm cast table
Heavy duty T slot base
140mm spindle travel
No.4 morse taper spindle
Fitted with Vertex 6XHSP-J6 keyless chuck
Beautiful kiwi made machine

To see this machine running:
https://youtu.be/JOvxGtsWKCI

Gornati Leopard Three Phase Lathe
Gornati Leopard Three Phase Lathe

Skylarc Ref X125412

Expected Auction End Time: 9th May 2021 9:19pm

Model: Gornati and Co Leopard 180
Bed length 1400mm
Distance between centers approx 950mm
Swing over bed approx 380mm
Swing over gap approx 480mm
Swing over cross slide approx 240mm
Three phase 4hp main motor
12 spindle speeds
53rpm - 2000rpm
Metric and imperial thread cutting
Quick change tool post with 4 tool holders
200mm three jaw chuck (2 jaw sets)
310mm four jaw chuck
56mm spindle bore
No.3 MT tailstock
Coolant pump
Tidy Italian machine ready for work

To see this machine running:
https://youtu.be/Z0pO_7hNKfk