Timaru Engineering Plant and Machinery Auction
Heavy Duty Workshop Workbench
Skylarc Ref D131450
Expected Auction End Time: 6th February 2022 8:56pm
Heavy Duty Workshop Workbench.
Box Steel frame with MDF board shelves and work surface and backboard.
Work surface approx 700mm deep and 900mm above floor.
420mm high backboard for hanging tools.
Condition - Centre legs have two extensions welded to bottom making them longer than end legs causing Workbench to lean. These will need to be cut off to make unit level. Workbench has been stored outdoors for some time some Steel is very rusty and MDF boards show deterioration, warping and cracking from weather exposure and will likely need replacing.
Heavy Duty Steel Topped Workbench
Skylarc Ref A131447
Expected Auction End Time: 6th February 2022 6:47pm
Heavy Duty Steel Topped Workbench.
8mm thick steel plate top surface measuring approx 2125mm wide, 900mm deep, and 885mm above floor.
Includes atrached side shelf unit with plywood top measuring approx 685mm wide, 1000mm deep, and 1020mm high.
Condition - Workbench shows heavy usage. Front support frame has broken weld and will need re-welding, see photo. Workbench appears to have been stored outside for some time as surfaces very rusty and weathered.
Workshop Workbench
Skylarc Ref C131449
Expected Auction End Time: 6th February 2022 8:11pm
Workshop Workbench.
Main work surface is MDF board approx 1050mm wide, 755mm deep and 935mm above floor.
500mm high backboard of MDF approx 1700mm wide.
Steel frame.
2250mm tall rod attached to right side
See photos for further design details
Very Tall Adjustable Workshop Material Support Stand
Skylarc Ref Z131446
Expected Auction End Time: 6th February 2022 9:14pm
Very Tall Adjustable Workshop Material Support Stand.
V-shaped top support bar, see photos.
Height adjustable from approx 3080mm up to approx 3600mm.
See photos for further design details.
Adjustable Workshop Material Support Stand w/ Spare Base Tripod Frame
Skylarc Ref Y131445
Expected Auction End Time: 6th February 2022 9:48pm
Adjustable Workshop Material Support Stand w/ Spare Base Tripod Frame.
Complete unit has V-shaped material support bar, see photos. This unit is height adjustable from approx 840mm up to approx 1300mm.
Also includes incomplete unit consisting of tripod base legs at approx 650mm in heigh.
See photos for further details on Included items.
3x Morse Taper Drills w/ 3x Morse Taper Shank Expansion Adapters
Skylarc Ref G131297
Expected Auction End Time: 6th February 2022 6:24pm
3x Morse Taper Drills w/ 3x Morse Taper Shank Expansion Adapters.
Includes 3x Morse Taper No. 4 to No. 3 a shank adapters.
Includes the following Drills, all with Morse Taper No. 2 shanks
- 17mm Drill
- two 14.5mm drills
Record No. 414 Mill Vice
Skylarc Ref C131293
Expected Auction End Time: 6th February 2022 9:31pm
Record No. 414 Mill Vice.
Jaw width approx 103mm.
Jaws open to approx 75mm.
Mounting slots spaced approx 130mm apart on centre.
Vice shows heavy industrial wear and usage. Drill hole damage on jaw slide surface and on tops of Jaws, see photos.
Heavy Duty Workshop Material Roller Support Stand
Skylarc Ref B131292
Expected Auction End Time: 6th February 2022 7:00pm
Heavy Duty Workshop Material Roller Support Stand.
Steel roller approx 285mm long,
Base is comprised of two heavy circular steel plates.
Roller height adjustable from approx 875mm up to approx 1090mm.
Sturdy, heavy duty unit.
Heavy Duty Workshop Material Support Stand
Skylarc Ref A131291
Expected Auction End Time: 6th February 2022 8:51pm
Heavy Duty Workshop Material Support Stand.
Heavy Steel construction.
Base comprised of three solid sterl disks and cylinders welded together.
Material Support bar is approx 755mm above floor and can accomadate materials up to 250mm wide.
Non-adjustable height.
Condition - Former height adjustable bolt and column have been welded in place.
Sturdy heavy Duty stand.
3x Assorted Workshop Material Support Stands
Skylarc Ref Z131290
Expected Auction End Time: 6th February 2022 6:14pm
3x Assorted Workshop Material Support Stands.
Each has V-type support bars, see photos.
All have adjustable heights. Lowest height unit lowrs to approx 730mm. Tallest unit rises to approx 1530mm.
Circular steel plate bases.
See photos for further design details.
Condition varies with each unit.
Masport Benchtop Drill Press on Stand
Skylarc Ref X131288
Expected Auction End Time: 6th February 2022 7:23pm
Masport Benchtop Drill Press on Stand.
Model number unknown.
Single phase.
13mm keyed chuck.
Drill table approx 260x260mm.
Max distance from table to Chuck approx 300mm.
Drill Mounted onto a heavy sterl stand approx 810mm tall.
Pair of Floor Level Industrial Piping Rollers
Skylarc Ref W131287
Expected Auction End Time: 6th February 2022 8:23pm
Pair of Floor Level Industrial Piping Rollers.
Heavy steel bases each 200x175x70mm.
Bsll bearing Rollers ea h approx 110mm diameter and spaced approx 110mm apart on centre of mounting bolts.
See photos for further design details.
Condition - three ball bearing Rollers turn very stiffly. One roller doesn't not turn at all. Bearings may need lubrication or replacement.
Pair of Floor Level Industrial Tank or Barrel Rollers
Skylarc Ref V131286
Expected Auction End Time: 6th February 2022 7:05pm
Pair of Floor Level Industrial Tank or Barrel Rollers.
Heavy steel bases each approx 460x150x55mm.
Each unit has two 110mm diameter, 45mm wide ball bearing Rollers each spaced apart approx 310mm on centre.
See photos for further design details
Condition - Ball bearings on three Rollers are not moving, one does stiffly move. Will require lubricant or replacement.
Retail Mobile Product Display Stand / Rack
Skylarc Ref U131285
Expected Auction End Time: 6th February 2022 6:30pm
Retail Mobile Product Display Stand / Rack.
Top section has brackets to fit Signage measuring approx 765mm in width.
Steel wire mesh base shelf.
Vertical rear panel with assorted holes for mounting shelves or hooks for product display.
Mounted on Castors.
See photos for further rack design details and condition.
Surface dust and some marks from workshop usage.
Shelving and hooks etc not included.
Large Iwatani Gas Profile Cutter
Skylarc Ref K131431
Expected Auction End Time: 6th February 2022 9:19pm
Model: Iwatani PC250 PCT
Large acetylene profile cutter
12 meter x 2.4 metre bed
4 metre long cutting carriage
6 torch head
Burney 3 CNC controller
Cartridge with shapes installed
PCT Magic Eye Pantagraph and table
Hoses and leads
Big capacity machine
This machine is located at Wallace and Coopers 12 Charman Street Timaru
Loading is available at this site by arrangement
Heavy Duty Steel Workshop Mobile Workbench / Cabinet
Skylarc Ref R131282
Expected Auction End Time: 6th February 2022 8:43pm
Heavy Duty Steel Workshop Mobile Workbench / Cabinet.
25x25mm box Steel frame with 1mm thick steel sheet sides.
Plywood top work sueface approx 905mm above floor.
390mm tall vertical back panel of 3mm thick steel sheet, hooks for hanging tools.
Left side has vertical Racking for storing long materials, parts etc.
Loser interior cabinet.
Mounted on 160mm diameter Castors.
Condition - Shows typical workshop surface grime and wear. Door latch missing. One swivel Castor does not turn well.
Heavy Duty Steel Topped Workbench
Skylarc Ref P131280
Expected Auction End Time: 6th February 2022 9:54pm
Heavy Duty Steel Topped Workbench.
10mm thick steel plate top surface.
Heavy steel frame.
Lower enclosed cabinet.
Includes attached Venlic No. 125 bench vice.
Note - Items seen on and within Workbench are NOT included.
A very sturdy well built unit.
Heavy Duty Steel Drill Bit Storage Rack
Skylarc Ref O131279
Expected Auction End Time: 6th February 2022 7:01pm
Heavy Duty Steel Drill Bit Storage Rack.
42x slots for holding drill bits or other compatible Tooling.
Can be individually numbered for sizes.
Each circular slot is approx 30mm diameter
Heavy steel frame and stand.
Note - for unit to be self Standing it will need to be bolted to floor.
See photos for further design details.
Meteor Three Phase Drill Press
Skylarc Ref H131428
Expected Auction End Time: 6th February 2022 7:39pm
Model: Sandham Industries Meteor
750 watt motor
4 speeds
Adjustable belt tension
290mm x 260mm bed
Heavy duty steel stand with cupboard
13mm keyless chuck
Classic kiwi made machine
Upgraded with new motor and controls
Assorted Mill Lockdown Kit Parts & Components
Skylarc Ref N131278
Expected Auction End Time: 6th February 2022 8:56pm
Assorted Mill Lockdown Kit Parts & Components.
Includes one incomplete set in standard red steel display rack.
Also includes a custom built heavy Steel rack measuring approx 380x150x115mm.
Includes assorted loose pieces.
Threaded rod Diameters are approx 12mm and 16mm Diameters.
See photos for further details on Included items and condition.
Meteor Single Phase Drill Press
Skylarc Ref E131425
Expected Auction End Time: 6th February 2022 7:09pm
Model: Sandham Industries Meteor
370 watt motor
4 speeds
Adjustable belt tension
290mm x 260mm bed
Heavy duty steel stand on wheels
1/2" chuck
Classic kiwi made machine
Faulty, motor powers up but does not turn.
Heavy Duty Workshop Material Support Roller Stand
Skylarc Ref M131277
Expected Auction End Time: 6th February 2022 7:15pm
Heavy Duty Workshop Material Support Roller Stand.
Roller approx 280mm long, 115mm diameter.
Top of roller approx 555mm above floor.
Non-adjustable height.
Heavy steel frame.
Surfaces very dirty from workshop usage
Pinnacle Vertical Machining Centre
Skylarc Ref U131415
Expected Auction End Time: 6th February 2022 8:21pm
Model: Pinnacle VMC-1020
Table dimensions 1200mm x 610mm
Travel X,Y,Z 1020mm/610mm/610mm
Spindle nose to table 150mm - 760mm
BT40 spindle
Speeds 60 - 8000rpm
7.5kw motor
24 tool changer
Fagor 8055 MC CNC
Manuals
Made 2001
Error:
ERROR 604: Saturation of A and or/B signal values
Spindle drive error
You will need to organize your own lifting machinery
To see this machine running:
https://youtu.be/QfY-2khRXyI
Ullrich Aluminium Step / Extension Combo Ladder
Skylarc Ref I131273
Expected Auction End Time: 6th February 2022 7:14pm
Ullrich Aluminium Step / Extension Combo Ladder.
Step Ladder mode 1690mm tall.
Extension Ladder mode approx 3.3-metres in length.
Condition - Ladder shows Workshop wear and usage. One foot is bent, see photos..
Heavy Duty Workshop Steel Saw Horse
Skylarc Ref H131272
Expected Auction End Time: 6th February 2022 8:36pm
Heavy Duty Workshop Steel Saw Horse.
Top beam of U-Shsped steel 100x50mm and 1300mm in length.
Sturdy construction.
Auction includes just the single saw horse.
See photos for further design details.
Heavy Duty Workshop Steel Saw Horse
Skylarc Ref G131271
Expected Auction End Time: 6th February 2022 6:29pm
Heavy Duty Workshop Steel Saw Horse.
Top beam of hollow steel approx 65x65mm and 1300mm in length.
Sturdy construction.
Auction includes just the single saw horse.
See photos for further design details.
Heavy Duty Workshop Steel Saw Horse
Skylarc Ref F131270
Expected Auction End Time: 6th February 2022 7:03pm
Heavy Duty Workshop Steel Saw Horse.
Top beam of hollow steel approx 100x50mm and 1300mm in length.
Sturdy construction.
Auction includes just the single saw horse.
See photos for further design details.
3x Assorted Workshop Material Support Frames
Skylarc Ref E131269
Expected Auction End Time: 6th February 2022 9:05pm
3x Assorted Workshop Material Support Frames.
Each are of a different custom built design.
Top support beam widths measure approx 260mm, 600mm, and 800mm.
All have adjustable heights.
Heights can range from approx 745mm up to approx 1480mm.
See photos for further design and condition details.
Bemato Single Phase Drill Press
Skylarc Ref V131416
Expected Auction End Time: 6th February 2022 8:21pm
Model: Bemato JTD 16A
12 speeds
290 - 3200 rpm
Belt drive
3/4 hp motor
No 2 morse taper spindle
16mm Jacob's keyless chuck
280mm x 280mm table
On heavy duty steel stand with adjustable materials support
3x Assorted Workshop Material Support Frames
Skylarc Ref D131268
Expected Auction End Time: 6th February 2022 9:54pm
3x Assorted Workshop Material Support Frames.
All units have V-shaped Steel support tops, see photos.
All have adjustable heights.
Lowest height approx 660mm, tallest height approx 1300mm.
See photos for further design and condition details of each unit.
5 Assorted Steel Sheets/ Plate
Skylarc Ref W131027
Expected Auction End Time: 6th February 2022 7:52pm
1x Sheet Approx 2435mm x 1500mm x 6mm thick
1x Sheet Approx 2445mm x 1220mm x 6mm thick
1x Sheet Approx 2450mm x 1220mm x 6mm thick
1x Sheet Approx 1460mm x 630mm x 11mm thick
1x Sheet Approx 1120mm x 515mm x 4mm thick
Vintage Antique Duff Norton 5-Ton Jack
Skylarc Ref A131265
Expected Auction End Time: 6th February 2022 6:41pm
Vintage Antique Duff Norton 5-Ton Jack.
Made in England by Duff Norton.
Model BX 4035
5-Ton capacity.
Jack Lever is missing.
Operates easily up and down by hand. Would make a great reconditioning project.
Rapid Quick Change Lathe Tool Holder
Skylarc Ref B131266
Expected Auction End Time: 6th February 2022 9:54pm
Rapid Quick Change Lathe Tool Holder.
Unknown manufacturer.
Main unit stamped with "RAPID-ISA, Type D".
Main unit measures approx 175x175x105mm.
Includes 4x tool Holder units that can accomadate tools with shanks up to approx 42mm high, 30mm wide.
Main unit can hold three Tool Holders at one time.
Centre mounting hole on main unit is approx 40mm diameter.
See photos for further design and condition details.
10x Assorted End Mills
Skylarc Ref Y131263
Expected Auction End Time: 6th February 2022 6:45pm
10x Assorted End Mills.
Metric and Imperial Sizes.
Cutting Diameters range from approx 25mm up to 50mm.
Mounting shanks are 25mm or 32mm.
Condition varies with each unit, see photos for further details. All have been used.
8x Rough End Mills
Skylarc Ref X131262
Expected Auction End Time: 6th February 2022 7:57pm
8x Rough End Mills.
Assorted types.
Lengths from approx 105mm to approx 205mm.
Cutting Diameters range from 32mm to 40mm.
Mounting shanks are 32mm Diameter with exception of one unit with 25mm diameter.
See photos for further type and condition details.
14x Assorted Milling Slotting Cutters
Skylarc Ref V131260
Expected Auction End Time: 6th February 2022 8:23pm
14x Assorted Milling Slotting Cutters.
Assorted sizes and teeth types.
Outer diameters range from approx 62mm up to approx 100mm.
Thicknesses range from approx 7mm to approx 22mm.
Condition varies with each unit. Most show surface rusting.
Small Mill Vice
Skylarc Ref U131259
Expected Auction End Time: 6th February 2022 6:53pm
Small Mill Vice.
Warwick Bowring Limited branded.
90mm jaw width.
Jaws open up to approx 58mm.
Mounting slots spaced approx 110mm apart on centre.
Condition - Some heavy Drill wear marks in unit, see photos. Threaded screw would benefit from some oiling.
8x Vintage Lathe Turning Tools
Skylarc Ref T131258
Expected Auction End Time: 6th February 2022 6:57pm
3x Vintage Lathe Turning Tools.
Seven tools J&S branded. One tool branded Armstrong No. 102 Tool.
Straight, left and right versions.
Seven tools are approx 240mm long with shanks approx 27mm high, 22mm wide.
One Tool has had its shank cut shorter and narrower.
Vintage units, most missing Cutter insert screw.
3x Vintage Lathe Turning Tools
Skylarc Ref S131257
Expected Auction End Time: 6th February 2022 8:12pm
3x Vintage Lathe Turning Tools.
Two units J&S branded, one unit Losk branded.
Includes straight and left and right angled versions.
The two smaller left and right angled tools are approx 240mm long, with Shank sizes approx 27mm high, 22mm wide.
Larger straight Tool approx 250mm long with Shank 32mm tall, 30mm wide.
See photos for further design and condition details.
3x Vintage Lathe Turning Tools
Skylarc Ref R131256
Expected Auction End Time: 6th February 2022 6:51pm
3x Vintage Lathe Turning Tools.
J&S branded.
Includes straight and left and right angled versions.
Total tool lengths are approx 290mm
Shank sizes are approx 32mm high, 30mm wide.
See photos for further design and condition details.
3x Vintage Lathe Turning Tools
Skylarc Ref Q131255
Expected Auction End Time: 6th February 2022 9:26pm
3x Vintage Lathe Turning Tools.
J&S branded.
Includes straight and left and right angled versions.
Total tool lengths are approx 240mm
Shank size is approx 27mm high, 23mm wide.
See photos for further design and condition details.
2x Large Diameter Morse Taper Type Drills, Modified
Skylarc Ref N131252
Expected Auction End Time: 6th February 2022 8:00pm
2x Large Diameter Morse Taper Type Drills.
Smaller unit is 2 1/8" Size.
Larger unit is missing size stamps, diameter approx 75mm diameter.
Both units have modified morse Taper type shanks, see photos for further details. Shank Diameters are approx 56mm and 60mm.
Peddinghaus Punch and Shear with Tooling
Skylarc Ref S131075
Expected Auction End Time: 6th February 2022 7:28pm
Model: Peddinghaus 210AD/13
50 ton punch
Notcher, bar/angle/beam cutter, shear
Three phase
Trolley of tooling
Top quality German machine ready to go
To see this machine running:
https://youtu.be/lfqLYFJBxg8
Custom Long Stroke Hydraulic Press
Skylarc Ref V131078
Expected Auction End Time: 6th February 2022 6:51pm
Two sided hydraulic press
Large side ram stroke 860mm
75mm tip
Short side ram stroke 500mm
Dual controls, one for each press side
Heavy duty plate steel tables
Long side 800mm x 500mm
Short side 450mm x 350mm
Steel frame
Three phase
Some tooling
Stanko Radial Arm Drill
Skylarc Ref T131076
Expected Auction End Time: 6th February 2022 9:29pm
Stankoimport radial arm drill
Unknown model
No.4 morse taper spindle
2.2kw drill motor
9 speeds
35.5rpm - 1400rpm
Electric rise and fall table
760mm x 450mm table
Power feeds
Not too big, not too small, handy sized machine ready for work
To see this machine running:
https://youtu.be/---0DXlPdP8
Heavy Duty Workshop Trolley Shelf Cart
Skylarc Ref H131246
Expected Auction End Time: 6th February 2022 9:09pm
Heavy Duty Workshop Trolley Shelf Cart.
Heavy steel frame with plywood shelves.
155mm diameter wheels.
Vertical distance between lower shelves approx 230mm.
Unit shows moderate Workshop wear and usage. See photos for further design and condition details.
Mill Vice, Damaged
Skylarc Ref I131247
Expected Auction End Time: 6th February 2022 7:10pm
Mill Vice.
150mm jaw width.
Jaws open to approx 180mm.
Condition - Vice shows heavy industrial wear and usage. Heavy Drill marks near stationary jaw. One section of mounting base is broken off and missing.. Movable jaw section will still lock in place with threaded rod assrmbly.
See photos for further item design and condition.
Custom Heavy Duty Workshop Material Rolling Support Frame
Skylarc Ref D131242
Expected Auction End Time: 6th February 2022 7:05pm
Custom Heavy Duty Workshop Material Rolling Support Frame.
Custom built unit.
90mm diameter Rollers.
Roller height above floor approx 900mm.
Distance between each set of Rollers approx 2140mm.
Some damage to Rollers, see photos.
Heavy Steel Workshop Stool Chair
Skylarc Ref G131245
Expected Auction End Time: 6th February 2022 6:11pm
Heavy Steel Workshop Stool Chair.
Heavy Steel construction, very sturdy unit.
Seat approx 320x315mm and approx 610mm above floor.
Stool shows heavy industrial wear and usage but still very sturdy. Would benefit from a reconditioning.
Heavy Duty Steel Material Scrap Bin
Skylarc Ref F131244
Expected Auction End Time: 6th February 2022 6:27pm
Heavy Duty Steel Material Scrap Bin.
Custom built with heavy Steel sides and frame.
Elevated base for Forklift pickip along with two top loops for crane pickup.
Contents not included.
See photos for further design and condition details.
Cosen Metal Cutting Bandsaw
Skylarc Ref R131074
Expected Auction End Time: 6th February 2022 8:46pm
Model: Cosen AH-1010JAY
2 hp main drive motor
Three phase
400mm cutting length
Automatic mode
Front stop
Electric vice and rollers
Includes entrance rollers
1000mm long and 4000mm long
To see this machine running:
https://youtu.be/WvkVtRWLvu8
Custom Workshop Storage Bin
Skylarc Ref E131243
Expected Auction End Time: 6th February 2022 8:49pm
Custom Workshop Storage Bin.
Custom built.
Steel bin interior approx 305x205x180mm.
Sliding top lid.
Unit shows denting, bent legs from workshop usage. May benefit from a reconditioning.
See photos for further design and condition details.
Dye 12mm Sheet Metal Guillotine
Skylarc Ref P131072
Expected Auction End Time: 6th February 2022 9:30pm
Model: Dye 2.5 X 12MS
12mm maximum thickness
2.5 metre cut width
Back gage
Three phase
Nick in top blade
You will need your own lifting machinery for this machine
To see this machine running:
https://youtu.be/WLoH9PXoAVY
Heavy Duty Industrial Material Support Stand w/ Roller
Skylarc Ref B131240
Expected Auction End Time: 6th February 2022 7:25pm
Heavy Duty Industrial Material Support Stand w/ Roller.
Steel roller measures approx 280mm long, 45mm diameter.
Height adjustable from approx 850mm up to approx 1100mm.
Heavy steel plate base approx 440x435x25mm.
See photos for further design and condition details.
Heavy Duty Workshop Welding Stand
Skylarc Ref C131241
Expected Auction End Time: 6th February 2022 9:39pm
Heavy Duty Workshop Welding Stand.
Heavy steel construction.
Top assembly approx 300mm diameter, 100mm deep.
Total unit height approx 900mm.
Steel plate base approx 450mm diameter.
See photos for further design and condition details.
Pair of Heavy Duty Workshop Saw Horses
Skylarc Ref A131239
Expected Auction End Time: 6th February 2022 6:43pm
Pair of Heavy Duty Workshop Saw Horses.
Constructed from hollow steel lengths.
Top beam approx 1200mm long, 75mm wide.
Each unit is approx 855mm tall.
Feet length approx 740mm.
See photos for further design and condition details.
Heavy Duty Workshop Sack Barrel Trolley
Skylarc Ref Z131238
Expected Auction End Time: 6th February 2022 7:41pm
Heavy Duty Workshop Sack Barrel Trolley.
Lifting platform approx 580x330mm.
390mm diameter pneumatic tyres.
Condition - Older but sturdy unit. Tyres appear intact but need some air. See photos for further design and condition details.
Pair of Heavy Duty Steel Workshop Saw Horses
Skylarc Ref W131235
Expected Auction End Time: 6th February 2022 7:11pm
Pair of Heavy Duty Steel Workshop Saw Horses.
Top I-beams each 1020mm long, 75mm wide.
Total height of each 865mm.
Heavy Steel support legs and feet.
Foot length approx 630mm.
See photos for further design and condition details
Heavy duty, sturdy units.
Pair of Steel Workshop Material Support Frames
Skylarc Ref Y131237
Expected Auction End Time: 6th February 2022 9:56pm
Pair of Steel Workshop Material Support Frames.
Heaght adjustable from approx 800mm up to approx 1350mm.
Hollow steel pipe legs and column with V-shaped aluminium material holders.
See photos for further design and condition details.
Pair of Heavy Duty Steel Workshop Saw Horses
Skylarc Ref X131236
Expected Auction End Time: 6th February 2022 9:52pm
Pair of Heavy Duty Steel Workshop Saw Horses.
Top Steel I-beam approx 1000mm long, 100mm wide.
Each unit is approx 950mm tall.
Steel beam foot lengths approx 750mm.
See photos for further design and condition details.
Heavy duty and study units.
Assorted Industrial Milling Parts, Components, Accessories, & Tools
Skylarc Ref S131231
Expected Auction End Time: 6th February 2022 6:14pm
Assorted Industrial Milling Parts, Components, Accessories, & Tools.
Assorted tool Holder components, older model Mill Cutters, Assorted Tool Holder Wrenches, and more. See photos for further details on Included items.
Condition varies with each unit.
3x Assorted D and Bow Shackles
Skylarc Ref R131230
Expected Auction End Time: 6th February 2022 9:11pm
3x Assorted D and Bow Shackles.
Includes:
- 17 ton capacity D Shackle.
- 9.5 ton capacity Bow Shackle
- Unknown capacity D Shackle measuring approx 160mm long, 105mm wide, 26mm diameter steel.
Condition varies with each unit.
5 Large Diameter Steel Pipes
Skylarc Ref Q130943
Expected Auction End Time: 6th February 2022 6:57pm
Approx Measurements -
1x 2550mm long x 275mm diameter
5mm thick
1x 1500mm long x 410mm diameter
12mm thick
1x 1770mm long x 165mm diameter
4mm thick
1x 1745mm long x 275mm diameter
5mm thick
1x 2360mm long x 210mm diameter
10m thick
Assorted Large Steel Pipes
Skylarc Ref Q131021
Expected Auction End Time: 6th February 2022 8:20pm
1 ( from front of pallet)
Approx 3470mm long x 150mm diameter.
2
Approx 4960mm long x 115mm diameter.
3
Approx 4450mm long x 165mm diameter.
4
Approx 4450mm long x 115mm diameter.
5
Approx 6510mm long x 90mm diameter.
Large Russian Horizontal Boring Machine
Skylarc Ref P131046
Expected Auction End Time: 6th February 2022 7:58pm
Model: Stankoimport 2620A
80mm boring spindle
Metric and imperial thread cutting
1mm - 10mm
Morse taper No.5 spindle
Longitudinal spindle travel 500mm
Spindle speeds 8 - 2000rpm
620mm diameter faceplate
Headstock vertical travel 710mm
800mm x 1000mm table
800mm x 800mm table travel
Rotary table
Newall digital read out
Some tooling and accessories
Lifting chain not included
You will need you own lifting machinery
4x Assorted NT40 Type Tool Holders
Skylarc Ref Q131229
Expected Auction End Time: 6th February 2022 6:18pm
4x Assorted NT40 Type Tool Holders.
One unit is marked as a AW NT40-FMB27 holder.
Other three remaining holders have no visible ID marks. See photos for further details on type and condition of each unit.
5x Assorted Indexable Mill Cutters
Skylarc Ref O131227
Expected Auction End Time: 6th February 2022 6:02pm
5x Assorted Indexable Mill Cutters.
Includes:
- Secodex R220.13-0040-12 Cutter on custom made mounting shank.
- 58mm diameter unmarked cutter.
- 3x 32mm diameter Cutters, all with visible ID marks.
See photos for further details on Cutter types and condition of each.
17x Assorted End Mills & Thread Tapers
Skylarc Ref H131220
Expected Auction End Time: 6th February 2022 9:44pm
17x Assorted End Mills & Thread Tapers.
Two units are Thread Tapers, all others are assorted types of end Mills, Ball Nose, and other type of Mills.
Imperial and metric sizes.
Condition varies with each unit. See photos for further details on included items and condition.
2x NT40 Type Tool Holders
Skylarc Ref E131217
Expected Auction End Time: 6th February 2022 8:58pm
2x NT40 Type Tool Holders.
Unknown manufacturer and models.
Both appear to be identical units.
40mm diameter shanks with removable sections.
Each shank is approx 100mm long.
See photos for further type details.
NT40 Type Tool Holder w/ Keyed 13mm Drill Chuck Attachment
Skylarc Ref C131215
Expected Auction End Time: 6th February 2022 7:30pm
NT40 Type Tool Holder w/ Keyed 13mm Drill Chuck Attachment.
Tool Holder type NT40-MTA4-90, manufacturer unknown.
Includes attached Jacobs 13mm Keyed chuck with a No. 4 Morse Taper Shank.
Chuck key is missing.
See photos for further type details.
Clarkson Autolock Chuck w/ Collets & NT40 Type Holder
Skylarc Ref V131208
Expected Auction End Time: 6th February 2022 7:38pm
Clarkson Autolock Chuck w/ Collets & NT40 Type Holder.
Collet external diameters are approx 23mm.
Tool Holder is marked with RTEb-40/4.
See photos for further details on Included items.
Stanko Three Phase Milling Machine
Skylarc Ref G131037
Expected Auction End Time: 6th February 2022 8:32pm
Model: Stankoimport 6T83W-YXN4
Universal milling machine
NT50 spindle bore
18 horizontal spindle speeds
40 - 1600 rpm
11 vertical spindle speeds
50 - 1600 rpm
1700mm x 400mm table
Powerfeeds
3 x horizontal arbors
Arbor supports
90 degree drive
Newall topaz digital read out (not going)
Vice NOT included
You will need to organize your own lifting machinery for this mill
To see this machine running:
https://youtu.be/3skoy6cRktc
NT50 Type Tool Holder w/ Clarkson Autolock Attachment
Skylarc Ref U131207
Expected Auction End Time: 6th February 2022 9:30pm
NT50 Type Tool Holder w/ Clarkson Autolock Attachment.
Unknown manufacturer and model of tool Holder.
Includes attachment Wrench and spare screw-in component.
See photos for further details on items included.
Stanko Three Phase Milling Machine
Skylarc Ref F131036
Expected Auction End Time: 6th February 2022 9:24pm
Model: Stankoimport 6T13-1
Vertical milling machine
NT50 spindle bore
1700mm x 400mm table
17 spindle speeds
40-1600rpm
Powerfeeds on all axis
X axis travel 340mm
Y axis travel 1000mm
Z axis travel 430mm
NT50 autolock chuck fitted
Swing down guard
Beefy Russian machine ready for work
You will need your own lifting equipment to collect this machine
To see this machine running:
https://youtu.be/_ssvGisoKcI
Vintage Antique 15-Ton Duff Barrent No. 239 Jack
Skylarc Ref F131192
Expected Auction End Time: 6th February 2022 8:19pm
Vintage Antique 15-Ton Barrett No. 239 Jack.
Made in USA by The Duff Manufacturing Co.
Age unknown.
Jack raises and lowers easily by hand using side Lever.
Would make a great restoration project!
Side Lever extension bar is missing.
See photos for further Condition details.
See our other listing for a second jack of the same model.
Sandvik Coromant NT50 Type Tool Holder 392.0027-50 40 066
Skylarc Ref J131196
Expected Auction End Time: 6th February 2022 7:56pm
Sandvik Coromant NT50 Type Tool Holder.
Part No. 392.0027-50 40 066.
Includes case.
Tool Holder shows very few minor signs of use. Case w teruor shows dust and wear from workshop storage.
Narex Praha 6-Piece Lathe Turning Tool Set
Skylarc Ref I131195
Expected Auction End Time: 6th February 2022 8:57pm
Narex Praha 6-Piece Lathe Turning Tool Set.
Includes the following Narex Praha turning tools:
- R-25-0926, 150mm long
- R-25-0925, 150mm long
- L-25-0923, 80mm long
- L-25-0924, 80mm long
- R-25-0921, 80mm long
- R-25-0922, 80mm long
Includes assorted Loose Inserts and wood case.
Case exterior shows grime and wear from workshop storage. Tools show generally mild usage.
Vintage Antique 15-Ton Duff Barrent No. 239 Jack
Skylarc Ref E131191
Expected Auction End Time: 6th February 2022 8:29pm
Vintage Antique 15-Ton Barrett No. 239 Jack.
Made in USA by The Duff Manufacturing Co.
Age unknown.
Jack raises and lowers easily by hand using side Lever.
Would make a great restoration project!
Side Lever extension bar is missing.
See photos for further Condition details.
See our other listing for a second jack of the same model.
Ecoca EL-4615E CNC Teach Lathe
Skylarc Ref E131009
Expected Auction End Time: 6th February 2022 6:29pm
Model: Ecoca EL-4615E
Traverses XYZ: 205mm x 1300mm
X axis travel 205mm
Y axis travel 1300mm
Spindle Speed: 20 - 3000
Swing over bed 460mm
Centre height 225mm
Distance between centres 1500mm
Swing over cross slide 258mm
270mm removable gap
Swing over gap approx 680mm
78mm spindle bore
3 Jaw Chuck
4 Way Toolpost
KWS-980A CNC controller
Manufactured 1999
Tidy machine straight out of work
This machine running:
https://youtu.be/x_jHWMSSVmo
Adjustable Material Support Roller Stand
Skylarc Ref D131190
Expected Auction End Time: 6th February 2022 9:22pm
Adjustable Material Support Roller Stand.
Non-rolling material support bar can accomadate material up to 205mm wide.
Height adjustable from approx 870mm up to approx 1345mm.
Heavy base comprised of solid steel disks.
Heavy duty, sturdy unit.
Adjustable Material Support Roller Stand
Skylarc Ref C131189
Expected Auction End Time: 6th February 2022 9:40pm
Adjustable Material Support Roller Stand.
Roller is approx 190mm long, 70mm diameter.
Height adjustable from approx 835mm up to approx 1270mm.
Heavy solid steel base 255mm diameter, 110mm thick.
Heavy, stable unit. Dent to base of lower hollow pipe, see photo.
Small Steel Industrial Trolley Frame
Skylarc Ref B131188
Expected Auction End Time: 6th February 2022 6:27pm
Small Steel Industrial Trolley Frame.
Sturdy steel frame.
Circular upper section indicating previous usage for holding a tank or cylinder horizontaly.
95mm diameter wheels.
See photos for further design details.
Three Phase Plate Rollers
Skylarc Ref A131005
Expected Auction End Time: 6th February 2022 8:44pm
1240mm long rollers
120mm diameter top roller
100mm diameter bottom rollers
Modernised with Microdrive VSD
Forward and reverse
On heavy duty steel frame
To see this machine running:
https://youtu.be/crR3YiObeBs
2x Industrial Material Support Stands
Skylarc Ref A131187
Expected Auction End Time: 6th February 2022 7:10pm
2x Industrial Material Support Stands.
Similar custom built units of steel Tubing vertical columns and steel plate baes. V-type material support bars.
One unit is height adjustable from approx 880mm up to 1510mm.
Second is height adjustable from approx 890mm to 1570mm.
See photos for further design details.
TOS Three Phase Lathe
Skylarc Ref Z131004
Expected Auction End Time: 6th February 2022 9:04pm
Model: TOS SN 55B-71B
Bed length 2900mm
Swing over bed 600mm
Removable gap 415mm long
Swing over gap approx 800mm
Distance between centers approx 2000mm
78mm spindle bore
16 spindle speeds
16 - 1630 rpm
Metric and imperial thread cutting
320mm three jaw chuck
Steadies
You will need your own lifting equipment for this machine
To see this machine running:
https://youtu.be/iVi_diR0PyU
2x Matching Industrial Material Support Stands
Skylarc Ref Z131186
Expected Auction End Time: 6th February 2022 7:32pm
2x Matching Industrial Material Support Stands.
Each is approx 960mm high to material support bar level.
Non-adjustable height.
Can accomadate materials up to approx 245mm wide.
Heavy 50x50mm steel frame with 23mm thick, 245mm diameter bases.
Solid, sturdy units.
Gornati 3.5 Metre Lathe
Skylarc Ref Y131003
Expected Auction End Time: 6th February 2022 8:02pm
Model: Gornati Legoor 350
Bed 3850mm
Between centers approx 3100mm
Swing over bed approx 700mm
Removable gap 440mm long
Swing over gap approx 1000mm
105mm spindle bore
Three phase
16 spindle speeds
10 - 750rpm
600mm four jaw chuck
350mm three jaw chuck
950mm face plate
Steadies
Quick change post
8 tool holders
Manufactured 1969
You will need your own lifting equipment
To see this machine running:
https://youtu.be/GS0VBjvt_m0
Clarkson Mark II Tool & Cutter Grinder
Skylarc Ref W131183
Expected Auction End Time: 6th February 2022 9:18pm
Clarkson Mark II Tool & Cutter Grinder.
Made in England
Capacity - 305x150mm
Attached grinding wheel 100mm diameter.
Tooling table surface approx 303x107mm.
3-phase.
To see this machine running:
https://youtu.be/hjDxdxD9sZU
Industrial Sand Blasting Cabinet
Skylarc Ref V131182
Expected Auction End Time: 6th February 2022 6:19pm
Industrial Sand Blasting Cabinet
Unknown manufacturer, model.
Cabinet interior dimensions approx 880x560mm and from 320mm to 530mm High.
Condition - Bends in legs. Top window is removed and stored inside cabinet. Window seal is worn. Unknown if gloves are fully intact.
Industrial 3-Phase Linisher w/ Accessories
Skylarc Ref T131180
Expected Auction End Time: 6th February 2022 6:19pm
Industrial 3-Phase Linisher w/ Accessories.
Made in England by Canning Co.
Measures approx 700x1500x1170mm.
Includes second pallet of Assorted components and accessories, see photos.
Items show moderate industrial wear and usage.
Industrial Gas Bottle Sack Barrel Trolley
Skylarc Ref U131181
Expected Auction End Time: 6th February 2022 7:42pm
Industrial Gas Bottle Sack Barrel Trolley.
200mm Diameter wheels.
Bottle Lifting plate can accomadate bottles up to approx 215mm diameter.
See photos for further design details.
Shows moderate industrial wear and usage.
2x Assorted Lathe Dead Centres
Skylarc Ref R131178
Expected Auction End Time: 6th February 2022 8:18pm
2x Assorted Lathe Dead Centres.
Includes:
- One centre measuring approx 200mm long with Tapered shank from 37mm to approx 43mm.
- Second centre measuring approx 120mm long, 65mm diameter.
See photos for further design details.
Master Diesel Forced Air Workshop Heater B150CED
Skylarc Ref Q131177
Expected Auction End Time: 6th February 2022 6:34pm
Master Forced Air Workshop Heater.
Model No. B150CED.
Uses diesel fuel.
Heater size - 44kW
Tank capacity - 44L
Fuel consumption - 4.1L per hour.
Has been used in workshop environment. May benefit from a cleanup.
Miller Diesel Welder Generator
Skylarc Ref X131002
Expected Auction End Time: 6th February 2022 8:55pm
Model: Miller Big Blue 400D
Constant current DC welding power source
400 Amp welding output
2 x single phase power outlets
Duetz F3-6L912/W air cooled diesel engine
5405 hours on clock
Heavy duty trailer
Tool storage in side lockers
Reg expires 27/08/2022
WOF expired
Starts and runs well
Scotchman Hydraulic Punch and Shear
Skylarc Ref N131018
Expected Auction End Time: 6th February 2022 6:25pm
Model: Scotchman 314H12780
3 hp motor
Shearing blade 355mm long
80mm x 80mm angle blade
240mm x 190mm punch table
Three phase
Made in the USA
To see this machine running:
https://youtu.be/EJejgbXH90Q
Heavy Duty Mobile Workbench Cabinet
Skylarc Ref L131172
Expected Auction End Time: 6th February 2022 8:38pm
Heavy Duty Mobile Workbench Cabinet.
Heavy steel frame with 3mm thick steel sheet sides and lower door.
Lower inner cabinet with door.
Upper work surface approx 975mm above floor and is comprised of a 20mm thick MDF board.
Upper rear back panel rising approx 350mm above work surface and approx 760mm long.
Unit mounted on 160mm diameter Castors.
Solid, sturdy workshop unit.
Miller Towed Diesel Welder Generator
Skylarc Ref I131013
Expected Auction End Time: 6th February 2022 6:27pm
Model: Miller Big Blue 250D
250 Amp welding output
5135 total hours on clock
Duetz F2L912 air cooled diesel engine
Heavy duty steel trailer
Tool storage boxes on sides
Reg expires 27/8/22
Wof expired
Some rust in one side box, general surface rust
To see this machine running:
https://youtu.be/KskOfSL8xVQ
Adjustable Angle Lathe Chuck w/ Live Centre Mount
Skylarc Ref B131162
Expected Auction End Time: 6th February 2022 8:07pm
Adjustable Angle Lathe Chuck w/ Live Centre Mount.
Made in USSR, see ID label.
3-jaw Chuck 160mm diameter with 45mm diameter centre hole.
Includes live centre unit approx 185mm tall.
Atlas Copco Morse Taper Power Drill B4-32
Skylarc Ref Z131160
Expected Auction End Time: 6th February 2022 9:33pm
Atlas Copco Morse Taper Power Drill.
Model No. B4-32
Single phase.
Morse Taper No. 3 size bit socket
Includes attached Keyed 13mm drill Chuck with No. 3 Morse Taper shank. Chuck key included.
