Skylarc's Christchurch Engineering Auction
15x Assorted Threading Teeth Inserts for Threading Tool
Skylarc Ref E118764
Expected Auction End Time: 7th September 2020 7:04pm
15x Assorted Threading Teeth Inserts for Threading Tool.
Unknown what specific model of Threading tool these are compatible with. At least three different branding labels on units, they include The British Tap & Die Co, BSP Stronghold, GAS Stronghold.
See photos for further details on type of items in auction.
Wilden Air Pump Unit
Skylarc Ref D118763
Expected Auction End Time: 6th September 2020 6:16pm
Wilden Air Pump Unit.
Unsure of modrl number, possibly 00-2000-20-700.
See photos for further details on type of pump.
Overall dimensions are approx 260x145x130mm.
Condition - Unit shows exterior grime and use marks. Some water still in unit.
3x Partial Sets of Mill Cutter Index Inserts by Iscar & Sandvik
Skylarc Ref B118761
Expected Auction End Time: 6th September 2020 6:11pm
3x Partial Sets of Mill Cutter Index Inserts by Iscar & Sandvik.
Includes the following:
- 9x Sandvik Coromant CoroKey R390-17 04 08E-NL, H13A.
- 6x Iscar ADKT 150516R-HM.
- 3x Iscar inserts, type number Unknown as all ID labels are missing from case.
Condition - Most appear unused, some show light use. Cases show grime and wear.
Assorted Milling Edge Finders & Small Dead Center Units
Skylarc Ref A118760
Expected Auction End Time: 7th September 2020 6:20pm
Assorted Milling Edge Finders & Small Dead Center Units.
9x Edge Finder shafts in lengths varying up to 58mm.
8x small Dead centre units? Diameters of these range from approx 17mm to 24mm.
See photos for further details on what is included in auction.
Condition varies with each unit. Some edge Finders are bent.
6x Pairs + 3x Loose Blocks of Mill Stepped Angle Blocks
Skylarc Ref X118757
Expected Auction End Time: 6th September 2020 7:12pm
6x Pairs + 3x Loose Blocks of Mill Stepped Angle Blocks.
Five pairs are each block approx 67mm long, 60mm wide, 63mm thick.
One pair is each block approx 60mm long, 57mm wide, 57mm thick.
Includes 3x Loose individual blocks each a different size.
All show Workshop wear and usage
Mixed Lot of Assorted Chuck Keys, Mill Bits, & More
Skylarc Ref U118754
Expected Auction End Time: 7th September 2020 6:43pm
Mixed Lot of Assorted Chuck Keys, Mill Bits, & More.
Includes assorted drill Chuck Keys, Lathe Chuck Wrench, vintage looking mil bits, assorted other Wrenches, lightweight hanging scale, Morse Tapper adapter, and more. See photos for further details on what is included.
Condition varies greatly with each unit.
Assorted Lot of Dowty Washers, Various Metric & Imperial Sizes
Skylarc Ref S118752
Expected Auction End Time: 7th September 2020 9:28pm
Assorted Lot of Dowty Washers, Various Metric & Imperial Sizes.
JM Davie Limited brand.
Assorted sizes, see photos.
Leftover unused workshop stock. Cases show exterior dust and grime from workshop storage.
30+ Assorted End Mill Cutters & Drill Bits
Skylarc Ref Q118724
Expected Auction End Time: 6th September 2020 9:45pm
30+ Assorted End Mill Cutters & Drill Bits.
Assorted Ball Nose, Flat Nose, Reamer, Jobber Drill, and other related types of end Mills.
Sizes range from 3mm up to 25mm.
Condition varies with each unit. Most appear unused while a few others show generally light signs of usage. Includes cases show exterior grime and wear from workshop storage.
Assorted Lot of Pull-out Steel Dowel Pins, Tension Pins, & More
Skylarc Ref R118751
Expected Auction End Time: 7th September 2020 9:18pm
Assorted Lot of Pull-out Steel Dowel Pins, Tension Pins, & More.
Most items are Pull-out and tension type steel pins in wide variety of sizes. Hundreds of units. Aldo includes a case of small copper Washers and a case of small screws. See photos for further details on what is included.
Condition - Leftover unused workshop supply stock. Bags a D cases dirty from workshop storage.
14x Spools of Mitchell's Abrasive Cord, Assorted Sizes
Skylarc Ref P118723
Expected Auction End Time: 6th September 2020 8:39pm
14x Spools of Mitchell's Abrasive Cord, Assorted Sizes.
Assorted sizes and grits.
Condition - Most shoe exterior grime and wear from workshop usage. Most are partials with varying amounts of product remaining in each.
2x Sick Inductive Proximity Sensors IM05-0B8NS-ZW1
Skylarc Ref O118722
Expected Auction End Time: 7th September 2020 6:01pm
2x Sick Inductive Proximity Sensors.
Both are Type No. IM05-0B8NS-ZW1.
See the Sick Web link below for further item details:.
https://www.sick.com/ag/en/inductive-proximity-sensors/inductive-proximity-sensors/imm/im05-0b8ns-zw1/p/p232461
Both units are new in packaging. Packaging exterior shows some dust and grime from workshop storage
Vintage Light box Unit
Skylarc Ref L118719
Expected Auction End Time: 6th September 2020 6:25pm
Vintage Light box Unit.
Unknown manufacturer and model.
Unit measures approx 250x216x130mm.
Condition - Was used for many years in an engineering workshop so unit shows moderate wear and grime on surfaces. May benefit from a strong cleanup. Opaque white top shows scratching. Unit is operating.
3x Assorted Air Blow Guns & Wrench
Skylarc Ref K118718
Expected Auction End Time: 7th September 2020 7:40pm
3x Assorted Air Blow Guns & Wrench.
Includes:
- AmPro Air Blow Gun
- Vacula Air Blow gun
- Unknown type, brand and model of air powered ratchet or wrench, see photos for details on tool type.
All units show moderate wear and usage.
2x Heavy Duty 100mm Dia Trolley Castors
Skylarc Ref J118717
Expected Auction End Time: 6th September 2020 6:19pm
2x Heavy Duty 100mm Dia Trolley Castors.
Unknown manufacturer.
100mm diameter, 40mm wide red solid rubber wheels.
Mounting plates are 130x110mm.
Both are swivel type.
Condition - Both wheel surfaces show no wear from use so units likely unused but old stock that show moderate surface grime and dust from open long term Workshop Storage.
2x Large Taps & 1x Large Seating Milling Tool
Skylarc Ref I118716
Expected Auction End Time: 7th September 2020 6:27pm
2x Large Taps & 1x Large Seating Milling Tool.
Includes:
- 2x Opti Metric M 100x2 HS D-1 Taps.
- 1x Seating tool, unable to find ID stamp.
Includes MDF storage box.
Condition - Unsure if taps are unused or not, see photos. Seating Tool apoears used.
3x Metal Benchtop Workshop Parts Drawer Units
Skylarc Ref H118715
Expected Auction End Time: 6th September 2020 10:00pm
3x Metal Benchtop Workshop Parts Drawer Units.
1x 8-drawer unit approx 240x155x85mm.
2x 6-drawer units each 240x155x140mm.
Each drawer is approx 155x115x45mm.
All units show moderate grime and wear from workshop use.
8x Assorted Milling Straight Tooth Cutters
Skylarc Ref G118714
Expected Auction End Time: 7th September 2020 8:15pm
8x Assorted Milling Straight Tooth Cutters.
Assorted sizes, most unreadable from surface rust, see photos.
Condition varies with each unit. Most show wear and use with moderate surface rust.
5x Assorted Mill Parallels / Mounting Blocks
Skylarc Ref V118599
Expected Auction End Time: 6th September 2020 6:43pm
5x Assorted Mill Parallels / Mounting Blocks.
Each is an individual unit, no matching pairs.
Includes the following sizes:
- 217x39x27mm unit stamped CMM.
- 143x23x22mm unit stamped D3.
- 201x15x5mm unit.
- 68x62x25mm unit with unreadable stamp, see photos.
- 102x70x18mm unit stamped SPEG K.
Condition varies greatly with each unit.
Multipurpose Industrial Precision Benchtop Stand
Skylarc Ref P118593
Expected Auction End Time: 6th September 2020 9:31pm
Multipurpose Industrial Precision Benchtop Stand.
Unknown manufacturer.
Stamped with EPB100 on bottom of base.
Solid steel base 190x102x400mm.
Stand height 400mm.
Adjustanle component support bracket with a 65mm inner diameter support ring attached.
Unknown what unut was previously used for.
See photos for further design details.
Some rust spotting on steel surfaces.
Milling Lockdown Bolts w/ Holders
Skylarc Ref M118590
Expected Auction End Time: 7th September 2020 6:19pm
Milling Lockdown Bolts w/ Holders.
4x holders, two metal holding small Hex bolts, and two wooden holders holding large bolts of various lengths.
Condition varies with each unit. See photos for further details on what is included.
Assorted Mixed Lot of Workshop Lifting Loops, Anchors, Parts & Accessories
Skylarc Ref L118589
Expected Auction End Time: 6th September 2020 6:47pm
Assorted Mixed Lot of Workshop Lifting Loops, Anchors, Parts & Accessories.
A mix of various parts and components. 4x Heavy machine lifting units each approx 120x80,90mm.
Bags of various unused Anchors, Washers, etc.
See photos for further details on the wide variety of parts and components included.
Condition varies with each unit.
Assorted Lot Hex Bolts, Custom Bolts, & More
Skylarc Ref K118588
Expected Auction End Time: 7th September 2020 6:13pm
Assorted Lot Hex Bolts, Custom Bolts, & More.
Assorted sizes.
Some bolts have had nuts Welded to top to of them, see photos.
Includes other assorted Fastening Hardware, etc, see photos for further details.
All units show varying levels of use.
Assorted Mixed Mill Lockdown Components, Parts, & More
Skylarc Ref I118586
Expected Auction End Time: 7th September 2020 9:24pm
Assorted Mixed Mill Lockdown Components, Parts, & More.
A mixed lot of various loose Mill Lockdown Components, t-slot units, bolts, thick Washers and more. See photos for further details
Condition varies with each unit.
4x Standard Workshop Hand Shovels + 4x Custom Steel Rakes
Skylarc Ref H118585
Expected Auction End Time: 6th September 2020 8:04pm
4x Standard Workshop Hand Shovels + 4x Custom Steel Rakes.
Four hand shoves approx 135mm wide, 400mn long.
Four custom made heavy Steel Workshop Material rakes, 540mm to 600mm long handles.
All units show moderate Workshop wear and usage.
Assorted Lot Hand Tools Spanners, Sockets, Magnetic Probes, Stamps
Skylarc Ref G118584
Expected Auction End Time: 7th September 2020 6:44pm
Assorted Lot Hand Tools Spanners, Sockets, Magnetic Probes, Stamps.
Includes:
- 50x Assorted Spanners, both metric and Imperial Sizes.
- Partial 1/2" sockets set, no Wrench included.
- 3x Flexable magnetic probes.
- 10-piece metal stamp set.
Condition varies with each unit, some show rusting, see photos.
2x Workshop Face Sheilds + 1x Welding Mask
Skylarc Ref F118583
Expected Auction End Time: 6th September 2020 9:06pm
2x Workshop Face Sheilds + 1x Welding Mask.
Includes:
- 2x ProSafe Armadillo face sheilds.
- 1x unmarked welding mask.
Condition varies, ProSafe items are newer and show lesser usage than the older more worn welding mask.
5x Assorted Engineering Precision Straight Edges & Rullers
Skylarc Ref E118582
Expected Auction End Time: 7th September 2020 8:27pm
5x Assorted Engineering Precision Straight Edges & Rullers.
Includes the following:
- 2000mm long 80mm wide, 12mm thick steel straight edge unit, no visible branding marks.
- 1500x60x12mm Preisser Shahllineal 1500-1 DIN 874 straight edge.
- Toledo branded metal Metric and Imperial ruler, 1000mm length.
- unbranded metal imperial scale ruler, 48" long.
- Stanley branded 90 Degree straight edge unit, both metric and Imperial scales.
Condition varies with each unit.
Heavy Duty Steel Plate T-Slotted Workshop Table
Skylarc Ref C118580
Expected Auction End Time: 7th September 2020 7:07pm
Heavy Duty Steel Plate T-Slotted Workshop Table.
Solid 95mm thick steel plate with 10x t-slot grooves cut into it.
Includes a box of compatible t-slot components with Hex bolts.
Note - This unit does NOT include any support frame, auction is for the top plate only.
Note - Very heavy unit, estimate around 2700kg.
630mm Lifting Chain w/ Lifting Ring
Skylarc Ref A118578
Expected Auction End Time: 7th September 2020 8:14pm
630mm Lifting Chain w/ Lifting Ring.
Chain length approx 630mm long.
Lifting capacity 2000kg.
Certification is expired.
Includes a spare uncertified lifting ring approx 165x105x15mm.
Condition varies with each unit.
2x Lengths of Lifting Chains
Skylarc Ref Y118576
Expected Auction End Time: 7th September 2020 7:08pm
2x Lengths of Lifting Chains.
One unit has approx 2000mm long chain, a 1280kg limit and expired certification.
Second unit has approx 830mm long chain, 1280kg capacity, and expired certification.
Condition varies with each unit, see photos.
2x Lengths of Lifting Chains
Skylarc Ref X118575
Expected Auction End Time: 6th September 2020 9:07pm
2x Lengths of Lifting Chains.
One unit has approx 2000mm long chain, a 1280kg limit and expired certification.
Second unit has approx 3000mm long chain, 1280kg capacity, and certification good till 03/2021.
Condition varies with each unit, see photos.
2x Lengths of Lifting Chains
Skylarc Ref V118573
Expected Auction End Time: 6th September 2020 9:17pm
2x Lengths of Lifting Chains.
Both units have approx 2000mm long chain.
One unit has 1600kg limit and certification good till 03/2021.
Second unit has no certification tag so capacity is unknown.
Condition varies with each unit, see photos.
2x Lengths of Lifting Chains
Skylarc Ref U118572
Expected Auction End Time: 7th September 2020 7:08pm
2x Lengths of Lifting Chains.
Both units have approx 3000mm long chain.
One unit has 1600kg limit.
Second unit has 2000kg limit.
Both units certification good till 03/2021.
Condition varies with each unit, see photos.
Steel Workshop or Office Storage Cabinet by Europlan
Skylarc Ref T118571
Expected Auction End Time: 6th September 2020 7:12pm
Steel Workshop or Office Storage Cabinet by European.
3x inner adjustable shelves.
Lockable, key is included.
Condition - Some sticker residue, finish scratches, denting, rust spotting etc. One shelf is missing support brackets.
5x Assorted Workshop Power Extension Cords Leads & 2x Power Boards
Skylarc Ref Q118568
Expected Auction End Time: 7th September 2020 7:13pm
5x Assorted Workshop Power Extension Cords Leads & 2x Power Boards.
Two Plug Boss 6-outlet power boards.
5x power extension cable leads in assorted lengths up to 10 metres.
All units are 10A rated.
Invludes 6x sections of cable lead floor protection strips.
Condition varies with each unit.
4x 15A Single Phase Workshop Extension Power Leads Cords
Skylarc Ref P118567
Expected Auction End Time: 6th September 2020 6:36pm
4x 15A Single Phase Workshop Extension Power Leads Cords.
ACPA branded.
All are 15A Single Phase.
Includes 3x 10 metre and 1x 20 metre lengths.
Condition - One unit is as new in packaging, other three show light usage.
WIA Weldmatic MIG Welder and Wire Feed
Skylarc Ref O118566
Expected Auction End Time: 7th September 2020 8:21pm
WIA Weldmatic Fabricator & Wire Feeder Industrial Welding Set.
Manufactured in Australia by WIA Welding Industries Australia.
Three Phase
Weldmatic Fabricator Type No. CP33-02 B.
Wire Feeder type W17.
Powerd by 32A 3-phase plug.
8x Assorted Industrial Machine Drive Belts
Skylarc Ref O118748
Expected Auction End Time: 6th September 2020 7:13pm
8x Assorted Industrial Machine Drive Belts.
Includes the following:
- 3x Strongbelt 850 5M, 50mm width.
- 2x Poggi HTD Non Piegare 1040 8M, 30mm width.
- 1x Poggi HTD Non Piegare 640 8M, 20mm width.
- 1x Bando ST'S S8M 600, 25mm width.
- 1x unmarked belt 16mm wide.
All unita appear as new unused without packaging.
3x Indexable Lathe Turning Tools w/ Spare Indexes
Skylarc Ref I118742
Expected Auction End Time: 7th September 2020 8:46pm
3x Indexable Lathe Turning Tools w/ Spare Indexes.
Al three tools have no visible id markings so unknown manufacturer and models.
Each tool is 16x16mm in width and approx 100mm in length.
Includes a total of 9x compatible index units from Kennametal and Seco brands.
Condition - Tools show wear and usage. Indexes are leftover unused stock.
Indexable Lathe Boring Bar w/ Spare Indexes
Skylarc Ref H118741
Expected Auction End Time: 6th September 2020 8:41pm
Indexable Lathe Boring Bar w/ Spare Indexes.
Unable to find an ID mark on boring bar so manufacturer and model are unknown. The bar measures 22x16mm width and 125mm total length. Cylindrical section is 12mm diameter and 42mm in length.
Includes a total of 24x compatible index units made by Kennametal.
Condition - Boring Bar shows use and wear, index mounting screw is missing. Indexes are unused stock.
Seco Indexable Lathe Boring Bar w/ Spare Indexes
Skylarc Ref G118740
Expected Auction End Time: 7th September 2020 8:46pm
Seco Indexable Lathe Boring Bar w/ Spare Indexes.
Seco beaded boring Bar type number A16R-STFCR11.
Includes 10x Kennametal branded compatible index units.
Condition Boring Bar shows some usage. Spare Indexes are as new unused.
7x Assorted Lathe Tool Holders, Boring Bars, Knurling Bar
Skylarc Ref D118737
Expected Auction End Time: 6th September 2020 8:13pm
7x Assorted Lathe Tool Holders, Boring Bars, Knurling Bar.
Includes:
- Iscar Cut-Grip CGHN-32-3DG.
- Iscar SGTBU 16-5G Holder with a Iscar Cut-Grip GGHN 26-3D unit installed in it.
- Unknown brand Boring Bar S16R-CTFPR-11.
- Small Solar branded Holder with no visible type stamp, measures approx 115x14x14mm.
- unmarked Knurling Bar approx 137x45x17mm.
- small unmarked turning Tool approx 100mm in length and 16x16mm width.
- small unmarked turning Tool approx 100mm in length and 16x22mm width.
See photos for further type details.
Condition varies with each unit.
Assorted Workshop Tools, Supplies, Nuts, Bolts, Accessories
Skylarc Ref C118736
Expected Auction End Time: 7th September 2020 7:05pm
Assorted Workshop Tools, Supplies, Nuts, Bolts, Accessories.
Includes assorted nuts and bolts, some being stainless steel varieties. Also some Wrenches, Hex Keys, bearings, metal tool case with assorted odds and ends. A box of various engineering edge finder components and parts, all non operating. A wide variety of mixed items in auction.
Condition varies widely with each unit.
Assorted Used Lathe Chuck Jaws
Skylarc Ref B118735
Expected Auction End Time: 7th September 2020 6:25pm
Assorted Used Lathe Chuck Jaws.
Includes:
- 2x unmarked Jaws each approx 70x20x55mm.
- 3x units all stamped with 93212 and are each approx 87x25x64mm.
- 3x unmarked units each approx 125x41x51mm.
All units show varying levels of wear and usage.
2x Indexable Lathe Boring Bars Type A32T-STFCL16
Skylarc Ref D118711
Expected Auction End Time: 6th September 2020 7:36pm
2x Indexable Lathe Boring Bars.
Both units are Type A32T-STFCL16.
One unit is Sandvik Coromant CoroTurn 107 branded.
Second unit is Walter branded.
Condition - Sandvik bar has broken insert support section at top, see photos. Both units show wear and usage.
Fronius TransPuls Synergic 2700 Welder with Trolley
Skylarc Ref Q117892
Expected Auction End Time: 6th September 2020 9:09pm
Model: Fronius TransPuls Synergic 2700 4R/E
MIG Model with push pull gun
270 amp max welding output
Three phase
Multi-process MIG/MAG, TIG DC & rod electrode (MMA) welding
With Trolley
Self Standing Workshop Wall Unit
Skylarc Ref K117886
Expected Auction End Time: 7th September 2020 6:03pm
Self Standing Workshop Wall Unit.
Frame is made from 50x50mm hollow box Steel lengths.
Wall surfaces is 9mm thick MDF boards.
2x small whiteboards attached.
See our other listings for more of these units.
Workshop Work Table w/ Sheet Steel Top
Skylarc Ref J117885
Expected Auction End Time: 6th September 2020 9:28pm
Workshop Work Table w/ Sheet Steel Top.
5mm thick sheet steel top surface.
Approx 450mm long mounting accessory Welded to one side, see photos for details on type of mounting accessory.
Condition - lower small shelf needs reattaching and repair. Table shows typical workshop wear and usage.
Master B150 CED Direct Oil Fired Portable Heater
Skylarc Ref E117880
Expected Auction End Time: 6th September 2020 9:49pm
Master B150 CED Direct Oil Fired Portable Heater
Power: 44kw, 150.000 Btu/h, 38.000 Kcal/h.
Air displacement: 900m³/h.
Power: 220-240V 50Hz.
Fuel Consumption: 3,72kg/h.
Tank sise: 42L.
Please note this unit has not been tested or powered on.
Workshop Scrap Material Trolley Bin
Skylarc Ref G117882
Expected Auction End Time: 7th September 2020 8:06pm
Workshop Tipping Scrap Material Trolley Bin.
Castors attached to base.
Non Tipping design, contents are dumped by attaching Lifting hooks to rear base eye loop or push handle top hook, see photos.
Bin dimensions approx 700mm long, 605mm wide, 500mm high.
Total unit dimensions approx 870mm long, 615mm wide, 990mm high at handle.
Condition - Unit shows typical engineering Workshop wear and usage. The two swivel type rear Castors are not swiveling and may need maintenance or replacement.
Workshop Tipping Scrap Material Trolley Bin
Skylarc Ref F117881
Expected Auction End Time: 6th September 2020 7:38pm
Workshop Tipping Scrap Material Trolley Bin.
Mounted on Castors.
Steel bin dimensions approx 750mm long, 500mm wide, 490mm high.
Hinged for Tipping out contents.
Overall dimensions are approx 1035mm long, 520mm wide, 850mm high at handle.
Shows typical engineering Workshop wear and usage.
Mobile Workshop Sheet Material Transport Trolley
Skylarc Ref P117865
Expected Auction End Time: 7th September 2020 7:35pm
Mobile Workshop Sheet Material Transport Trolley.
120mm diameter Castors.
Note - white plastic sheet seen in photos is for demonstrative purposes only and is NOT included with Trolley.
Industrial Workshop Bandsaw
Skylarc Ref N117863
Expected Auction End Time: 7th September 2020 9:29pm
Industrial Workshop Bandsaw.
Unknown manufacturer.
Model No. MJ346.
30mm thick tiltable Table approx 590x490mm and 945mm above floor.
Table pivot capacity from 0 to 45 degrees.
Blade size 4080mm.
3-Phase powered.
Includes spare unused Starret branded blade type W-PB42 4080 x 27 x 8-12TPI.
Condition - Saw operates normally. Shows Workshop wear and use. Heavy tape residue from tape holding doors closed, see photos.
Assorted Lengths of Aluminium Material
Skylarc Ref D117853
Expected Auction End Time: 6th September 2020 9:39pm
Assorted Lengths of Aluminium Material.
Cylindrical, hollow box, L-Shaped, T-Shaped type lengths.
Lengths vary up to 5000mm.
Some appear to be off cuts.
Leftover unused workshop supply stock. Some dust from storage.
Workshop Work Bench Table, 7210mm Length
Skylarc Ref E117854
Expected Auction End Time: 7th September 2020 9:47pm
Workshop Work Bench Table, 7210mm Length.
600mm width, 910mm hight.
Lower 2400mm long shelf.
17mm thick plywood top surface.
Note - Auction is for long Workbench only, items seen on and around unit are not included.
Pair of Steel Workshop Work Saw Horses
Skylarc Ref G117856
Expected Auction End Time: 6th September 2020 6:13pm
Pair of Steel Workshop Work Saw Horses.
Steel tube frame with T-Shaped top beam.
Top beam approx 1930mm in length.
Height approx 635mm.
Condition - Units show moderate wear and residue from being used as welding supports, see photos.
Pair of Heavy Duty Workshop Wall Mounted Material Support Racks
Skylarc Ref H117857
Expected Auction End Time: 6th September 2020 9:04pm
Pair of Heavy Duty Workshop Wall Mounted Material Support Racks.
Pair of Heavy steel box type wall mounted bars approx 50x50x2540mm.
Each has 12x slightly angled steel bars for supporting materials etc, each bar is approx 300x40mm.
Appears to be custom built so max weight capacity is unknown.
Master XL6 Infrared Portable Diesel Heater
Skylarc Ref X117873
Expected Auction End Time: 7th September 2020 6:33pm
Master XL6 Infrared Portable Diesel Heater.
Infrared oil heaters deliver heat fast and exactly to the place where it is required without any air movement. They are suitable for dust-free drying walls or paints, defrosting machinery or pipe lines, heating the working areas.
Suitable for: * Garages * Workshops, * Construction sites * Sheds * Warehouses *.
Specifications:
Power: 17kW.
Output: 58.000 BTU/hour.
Output: 14,600 Kcal/hour.
Fuel Autonomy: 7 hours.
Fuel Consumption: 1.35 kg per hour.
Power supply: 220-240/50 V/Hz.
Rated Current: ,85 Amps.
Tank Capacity: 11 litres.
Pair of Heavy Duty Workshop Wall Mounted Material Support Racks
Skylarc Ref I117858
Expected Auction End Time: 6th September 2020 7:54pm
Pair of Heavy Duty Workshop Wall Mounted Material Support Racks.
Pair of Heavy steel box type wall mounted bars approx 50x50x2540mm.
Each has 12x slightly angled steel bars for supporting materials etc, each bar is approx 300x40mm.
Appears to be custom built so max weight capacity is unknown.
Industrial Workbench/Table
Skylarc Ref V117871
Expected Auction End Time: 7th September 2020 9:53pm
Industrial Workbench/Table.
Steel frame with wooden shelve, top and backboard.
Back board has a small storage shelve and 2 pinboards attached.
Workspace top dimensions: L2390mm x W1200mm x H920mm.
Condition - Moderate markings and stains.
Pair of Steel Workshop Personnel Lockers
Skylarc Ref J117859
Expected Auction End Time: 6th September 2020 7:09pm
Pair of Steel Workshop Personnel Lockers.
Unknown brand.
Have been repainted black.
MDF shelves have been added inside each section.
Both doors have locks but no keys included.
Condition - Attached units show moderate wear and usage. Some denting, rust spotting etc. Latch in one door needs repair.
Industrial Steel Workbench with Vice & Pinboard
Skylarc Ref U117870
Expected Auction End Time: 6th September 2020 6:08pm
Industrial Steel Workbench with Vice & Pinboard.
4 leg steel frame with steel sheet metal top (5mm steel sheet).
All 4 legs have mounting points on them.
150mm bench mounted vice, unknown make.
Workspace dimensions: L2405mm x W1230mm x H920mm.
Includes two undershelf storage compartments and a mounting point under the vice.
Condition - Please note that one of the legs is damaged and is close to snapping off - please see photos for more details.
Industrial Workshop Table
Skylarc Ref T117869
Expected Auction End Time: 7th September 2020 6:55pm
Industrial Workshop Table.
4 leg steel frame with wooden top and backboard.
2 front legs have mounting points.
Top surface dimensions: L700mm x W585mm x H940mm.
Backboard dimensions: L670mm x W12 x H270mm.
Condition - Steel frame has minor surface rust, top and backboard have moderate marking and oil stains as to be expected in a workshop environment.
Avery 250kg Industrial Analog Platform Scale
Skylarc Ref L117861
Expected Auction End Time: 6th September 2020 9:57pm
Avery 250kg Industrial Analog Platform Scale.
Made in England by Avery.
Type No. 3205ABA
250kg max capacity.
Weighing platform is approx 870x730mm and approx 185mm above floor.
Total unit height approx 1230mm
Enolt LL1500T LED Luminaire Industrial High Bay Light
Skylarc Ref W118496
Expected Auction End Time: 6th September 2020 7:42pm
Enolt LL1500T LED Luminaire Industrial High Bay Light.
Make: Enolt.
Model: LL15TAN5NZ300.
The Enolt LED Twin High Bay light was designed specifically for suspended mount installations the LL1500T is fitted with one of the most efficient and reliable LED's available anywhere in the world.
22,000 Lumens.
210 Watt Input
Luminaire Efficacy 105 Lumens Per Watt.
>93% Driver Efficiency.
Cri >80.
Pf >0.975.
5,000k Colour Temp.
Enolt LL1500T LED Luminaire Industrial High Bay Light
Skylarc Ref X118497
Expected Auction End Time: 7th September 2020 9:01pm
Enolt LL1500T LED Luminaire Industrial High Bay Light.
Make: Enolt.
Model: LL15TAN5NZ300.
The Enolt LED Twin High Bay light was designed specifically for suspended mount installations the LL1500T is fitted with one of the most efficient and reliable LED's available anywhere in the world.
22,000 Lumens.
210 Watt Input
Luminaire Efficacy 105 Lumens Per Watt.
>93% Driver Efficiency.
Cri >80.
Pf >0.975.
5,000k Colour Temp.
Enolt LL1500T LED Luminaire Industrial High Bay Light
Skylarc Ref Y118498
Expected Auction End Time: 6th September 2020 8:27pm
Enolt LL1500T LED Luminaire Industrial High Bay Light.
Make: Enolt.
Model: LL15TAN5NZ300.
The Enolt LED Twin High Bay light was designed specifically for suspended mount installations the LL1500T is fitted with one of the most efficient and reliable LED's available anywhere in the world.
22,000 Lumens.
210 Watt Input
Luminaire Efficacy 105 Lumens Per Watt.
>93% Driver Efficiency.
Cri >80.
Pf >0.975.
5,000k Colour Temp.
Enolt LL1500T LED Luminaire Industrial High Bay Light
Skylarc Ref Z118499
Expected Auction End Time: 7th September 2020 8:24pm
Enolt LL1500T LED Luminaire Industrial High Bay Light.
Make: Enolt.
Model: LL15TAN5NZ300.
The Enolt LED Twin High Bay light was designed specifically for suspended mount installations the LL1500T is fitted with one of the most efficient and reliable LED's available anywhere in the world.
22,000 Lumens.
210 Watt Input
Luminaire Efficacy 105 Lumens Per Watt.
>93% Driver Efficiency.
Cri >80.
Pf >0.975.
5,000k Colour Temp.
Enolt LL1500T LED Luminaire Industrial High Bay Light
Skylarc Ref V118495
Expected Auction End Time: 6th September 2020 9:28pm
Enolt LL1500T LED Luminaire Industrial High Bay Light.
Make: Enolt.
Model: LL15TAN5NZ300.
The Enolt LED Twin High Bay light was designed specifically for suspended mount installations the LL1500T is fitted with one of the most efficient and reliable LED's available anywhere in the world.
22,000 Lumens.
210 Watt Input
Luminaire Efficacy 105 Lumens Per Watt.
>93% Driver Efficiency.
Cri >80.
Pf >0.975.
5,000k Colour Temp.
2 x Vertex Electronic Edge Finder VPS-20
Skylarc Ref T118493
Expected Auction End Time: 6th September 2020 7:37pm
2 x Vertex Electronic Edge Finder VPS-20
Accuracy: 5µm.
Battery: Type 23AE.
Battery Voltage: 12V.
Brand: Vertex
Contact Diameter: 10 mm.
Light Type: LED.
Measurement System: Metric.
Overall Length: 160 mm.
Shank Diameter: 20 mm.
Includes 2x wood cases.
Both units operate.
Workshop Work Table Workbench
Skylarc Ref R118543
Expected Auction End Time: 7th September 2020 7:55pm
Workshop Work Table Workbench.
Work surface 815mm above floor.
17mm thick plywood top surface.
725mm high backboard of plywood for hanging tools etc.
Steel frame.
Holes in top for placing tooling or materials.
Shows typical wear and grime from workshop usage.
2x BT40 Type Mill Tool Changing Vices w/ 3x Mill Tool Wrenches
Skylarc Ref P118541
Expected Auction End Time: 7th September 2020 8:18pm
2x BT40 Type Mill Tool Changing Vices w/ 3x Mill Tool Wrenches.
Includes:
- green Vice with vertical and horizontal mounts for BT40 size Tool Holders, measures approx 205x95x130mm.
- Black Tool Holder with rotatable mount. Has been modified with nuts Welded to top to hold toll, see photos. Vice is approx 135x75x150mn.
- 3x Mill Tool specialty Wrenches, two wrenches are marked as ER32 size and third larger Wrench is unmarked.
Condition - All units show moderate Workshop wear and usage.
Kennametal Indexable Mill Drill KSEM200R5WN25M + 32mm Dia Mill Cutter
Skylarc Ref N118539
Expected Auction End Time: 6th September 2020 8:54pm
Kennametal Indexable Mill Drill type KSEM200R5WN25M.
Auction also Includes 32mm diameter, 220mm long Mill Cutter with no visible ID labeling. See photos for further details on this second Mill Cutter.
Assorted Lot of Partial Sets of Kennametal Milling Inserts (21 Pieces)
Skylarc Ref Q118698
Expected Auction End Time: 7th September 2020 9:18pm
Assorted Lot of Partial Sets of Kennametal Milling Inserts (21 Pieces)
Please see photos for full specifications.
Qtys from top left to bottom right:
1, 1, 6, 4, 3, 4, 2.
Assorted Lot of Partial Sets of Iscar Milling Inserts (66 Pieces)
Skylarc Ref R118699
Expected Auction End Time: 6th September 2020 7:01pm
Assorted Lot of Partial Sets of Iscar Milling Inserts (66 Pieces).
Please see photos for full specifications.
Qtys from top left to bottom right.
5, 7, 7, 6, 4, 8, 3, 9, 2, 8, 7.
BT40 Type Mill Tool Holder
Skylarc Ref A118474
Expected Auction End Time: 6th September 2020 8:57pm
BT40 Type Mill Tool Holder.
Unable to locate a brand/model mark. Suspecting that this unit may have been modified by having its shank narrowed on a lathe to make it narrower, see photos. Attachment mounting end is approx 47mm diameter.
Assorted Kennametal Inserts (19 Pieces)
Skylarc Ref G118168
Expected Auction End Time: 7th September 2020 8:22pm
Assorted Kennametal Inserts (22 Pieces).
12 x ITS Kennametal 1-14 Insert ground Radius 1 6mm.
EDCT140416PDFRLDJ
EC1416FLDJ
KC410M
MILL 1-14 INSERT GROUND R=16 MM
2984360 117483432H8JC
7 x ITS Kennametal KC410M Inserts.
EC1008FLDJ EDCT10T308PDFRLDJ KC410M.
Pagnoni Mill Tool Holder BT40M12X83 w/ Kennametal Attachment Cutter
Skylarc Ref R118465
Expected Auction End Time: 6th September 2020 7:29pm
Pagnoni Mill Tool Holder type BT40M12X83
Includes Kennametal Attachment Cutter type 25A03R035M12SED14.
Condition - Kennametal cutter appears unused but cannot verify. Tool holder shows generally light usage marks.
Vintage Ford Australia Mechanic Technical Training Manuals & More
Skylarc Ref N118461
Expected Auction End Time: 6th September 2020 9:31pm
Vintage Ford Australia Mechanic Technical Training Manuals and More.
Includes the following Ford Australia RT Registered Technician Technical Training Bulletins:
- F Series 5.8L EEC IV Fuel Injection System.
- KF Laser Engine Management System.
- Corsair Electronic Concentrated Control System.
- Oscilloscope Waveforms.
Aldo includes a Vintage 1971 published High Performance with Fuel Injection book by Vernon Tomlinson.
Condition - Appear to have been in storage for a long time. Some stiffness from past water damage but all pages still easily usable. Non-Ford book shows more moderate wear.
Walter Lathe Tool Holder w/ Accessories
Skylarc Ref L118199
Expected Auction End Time: 7th September 2020 8:12pm
Walter Lathe Tool Holder w/ Accessories.
Includes Walter branded items:
- Tool Holder Part No. MSS-E25L00-2525L with Walter attachment MSS-E25L21-GX24-2.
- Spare attachment MSS-E25L21-GX24-2 in case.
- 17x cutting inserts GX24-2E300N00-CF5.
Comdition - Tool Holder appears unused. Cases attachments and Inserts are as new in cases.
Assortment of Various Endmills (13 Pieces)
Skylarc Ref M118174
Expected Auction End Time: 6th September 2020 10:00pm
Assortment of Various Endmills (13 Pieces)
1 x D16 d16 AP32 L92 Z3 HA45 CR0.2 6054888.
1 x Seco 55312QR050230 Siron-A 4929185 056 DC=12 Re1=0.5.
2 x D12 d12 AP26 L73 Z3 Ha45 C 5995889.
1 x D12 d12 Ap22 L72 Z3 Ha45 C 6125172
1 x D12 d12 Ap22 L72 Z3 Ha45 C 6091880
3 x D12 d12 Ap22 L72 Z3 Ha45 C 6125170
1 x Seco 553080R050Z3.0 - Siron-A 5187032 090 DC-8 re1=0.5.
1 x GARR VRX 10 x 50 Ballnose G81312001.
1 x Hanita Varmill (MT.) 4777 6x6 S/E.
1 x GARR 820M 4mm <45070> GR7770.
10x Assorted End Mills, Drills, Cutters, Reamer
Skylarc Ref A118188
Expected Auction End Time: 7th September 2020 7:26pm
10x Assorted End Mills, Drills, Cutters, Reamer.
Includes:
- 4x Walter A1522-6.9 drills
- Iscar Indexable drill DCN 100-050-16R-5D.
- Unknown brand 13.49mm Reamer.
- Garr 1600, 16mm, 90 Deg.
- Sutton 20mm, 90 Deg.
- Sutton D175, 20.0mm.
- Gulring TIN 44638, 20.0mm.
- Dormer HSS 19.0mm
- Unknown brand flat nose end mill F3AA1600AWL45, K600.
- Iscar flat nose end mill EC120B25-3C12 IC900.
- Unknown brand and model of cutter.
Condition varies with each unit. Some are unused while others show varying levels of usage.
Assorted Small Endmills (9 Pieces)
Skylarc Ref N118175
Expected Auction End Time: 6th September 2020 9:03pm
Assorted Small Endmills (9 Pieces).
3 x Garr 45070 - 4mm EM SQ 2 FLUTE S/E SMG
Series 820M Standard Length 2 Flute – Square End.
2 x SGS 46853 Z-Carb-AP Z1MPCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 5 mm Dia Cutter, 0.3 mm Corner Radius, 13 mm Length of Cut, 4 Flutes, 6 mm Dia Shank, 57 mm OAL.
2 x SGS Kyocera 44551 4,0 ENDMILL 2FL SQ.
1 x SGS 46344 - SGS 46344 Z1MB Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 8 mm Cutting Diameter, 19 mm Cutting Length, 8 mm Shank Diameter, 63 mm Length
1 x Garr 27522 VRX 5x50x10 0.3mm C/R.
48x Assorted Jobber Type Drill Bits
Skylarc Ref Y118186
Expected Auction End Time: 6th September 2020 8:46pm
48x Assorted Jobber Type Drill Bits.
Assorted lengths up to 250mm.
Diameters range from 3.5mm up to 13mm.
Condition varies with each unit. Some show no use while others show varying levels of usage
Assorted Flatnose Endmills (14 Pieces)
Skylarc Ref R118179
Expected Auction End Time: 6th September 2020 8:38pm
Assorted Flatnose Endmills (14 Pieces).
7 x Iscar EC-B3 05-13C06E50 IC900.
Tool diameter - 5mm; Grade - IC900; Coating - TiAlN; Cutting Edge Material - Carbide; Shank Diameter - 6mm.
5 x Iscar EC-B3 06-13C06E50 IC900.
Economical type 3 flute, 45° helix, center cutting, medium length solid carbide endmills.
2 x Seco 553060R020Z3.0-SIRON-A.
553060R02023.0-SIRON 206X14X055 D6 RC.2
690.
6x Assorted Milling End Cutter Bits
Skylarc Ref U118182
Expected Auction End Time: 7th September 2020 8:02pm
6x Assorted Milling End Cutter Bits.
Unknown manufacturer and specific model numbers.
16mm and 20mm Diameter varieties.
See photos for details on specific cutting shapes etc.
Condition - Appear to be unused bits with no packaging.
3x Assorted Indexable Mill Drill Cutters by Iscar & Kennametal
Skylarc Ref X118159
Expected Auction End Time: 7th September 2020 6:01pm
3x Assorted Indexable Mill Drill Cutters by Iscar & Kennametal.
Includes:
- Kennametal MT1625337, 34mm diameter.
- Iscar DR034-124-32-09-40-N, at 31mm diameter.
- Iscar DR034-136-32-09-40-N, at 34mm diameter.
Condition - All show moderate wear and usage. May need end repair, see photos.
Assorted Ballnose Endmills (10 Pieces)
Skylarc Ref P118125
Expected Auction End Time: 6th September 2020 7:48pm
Assorted Ballnose Endmills (10 Pieces).
9 x GARR 8x65mm HSAL 2FL BALL *ALUMA Series 1280KD.
1 x Sgs® 44574 S-carb® 47mb Ball Nose End High Performance Metric Regular Length End Mill, 8 Mm, 19 Mm Max Depth Of Cut, 2 Flutes, 8 Mm Shank, 63 Mm Oal
3x Assorted Indexable Mill Drill Cutters
Skylarc Ref W118158
Expected Auction End Time: 7th September 2020 8:55pm
3x Assorted Indexable Mill Drill Cutters.
Includes:
- Iscar MiniTang T490 E90LN D25-3-C24-08-B-C.
- aporox 16mm diameter drill cutter with missing ID marks.
- Approx 31mn diameter drill cutter with missing ID marks.
Condition varies with each unit. All show wear and usage. Two show modifications to shank.
Assorted Ballnose Endmills (12 Pieces)
Skylarc Ref O118124
Expected Auction End Time: 6th September 2020 9:09pm
Assorted Ballnose Endmills (12 Pieces).
9 x Ball End Mills Garr Tool 43102 10.0mm Solid Carbide Ball End Mill <43102> 142B 10mm HSAL 10x70x24mm 2FL BALL END MILL.
3 x SGS 44575 47MB S-Carb High Performance End Mill, Uncoated, 10 mm Cutting Diameter, 22 mm Cutting Length, 10 mm Shank Diameter, 72 mm Length.
Assorted Flatnose Endmills (9 Pieces)
Skylarc Ref N118123
Expected Auction End Time: 7th September 2020 8:01pm
Assorted Flatnose Endmills (9 Pieces).
7 x ITA Iscar ECA-B-3 06-16C06-57 IC08 06 dh api 6 157 23 Had 5 C r0.2.
3 flute, 45° helix medium length solid carbide endmills. Used for machining aluminum.
2 x SGS 44701 6mm SER 43M S-CARB 3FL CARBIDE ALUMINIUM CUTTER 44701 13x57.
Assorted Flatnose Endmills (14 Pieces)
Skylarc Ref M118122
Expected Auction End Time: 6th September 2020 9:58pm
Assorted Flatnose Endmills (14 Pieces).
9 x ITA Iscar ECA-B-3 08-20C08-63 IC08 D8 d8 ap20 L63 Z3 Ha45 C r0.2.
3 flute, 45° helix medium length solid carbide endmills. Used for machining aluminum.
Note one of these pieces looks moderately worn/used - see photos.
5 x ITA Iscar EC-B3 08-19C08E63 IC900 18 8 a 19 143 145C.
Economical type 3 flute, 45° helix, center cutting, short/medium length solid carbide endmills.
Assorted Flatnose Endmills (11 Pieces)
Skylarc Ref L118121
Expected Auction End Time: 7th September 2020 7:16pm
Assorted Flatnose Endmills (11 Pieces)
10 x ITA Iscar ECA-B-3 10-22C10-72. (5 come without casing).
3 flute, 45° helix medium length solid carbide endmills. Used for machining aluminum.
1 x ITA Iscar EC-B3 12-26C12E73 IC900.
Economical type 3 flute, 45° helix, center cutting, short/medium length solid carbide endmill.
67x Assorted Mill Tool Holder Collets, Assorted Sizes
Skylarc Ref R118153
Expected Auction End Time: 6th September 2020 8:58pm
67x Assorted Mill Tool Holder Collets, Assorted Sizes.
Iscar and Rego Fix brands.
61x units are Assorted sizes of ER32 type Collets and remaining 6x units are ER40 type Collets.
Condition varies greatly with each unit. Some appear excellent condition while others show rust spotting.
Assorted Flatnose Endmills
Skylarc Ref K118120
Expected Auction End Time: 7th September 2020 8:32pm
Assorted Flatnose Endmills.
Includes:
6 x ITA Iscar ECA B 3 12-25C12-83 IC08.
3 flute, 45° helix medium length solid carbide endmills. Used for machining aluminum.
4 x SGS 12,0 ENDMILL 3FL SQ TB S-CARB 12x12x26x83.
Flute Diameter 12mm Flute Length 26mm Material Carbide OAL 83mm Shank Diameter 12mm.
Kennametal & SGS Branded End Mill Cutters
Skylarc Ref P118151
Expected Auction End Time: 6th September 2020 7:59pm
Kennametal & SGS Branded End Mill Cutters.
Includes:
- Kennametal Flat Nose end mill UGDE0750J5BE.
- SGS Ball Nose end mill 44578, 16mm.
Both units include cases.
Condition - Both end Mills appear as new, unused leftover Workshop stock. Case exteriors show wear and grime from workshop storage.
Insize Electronic Edge Finder (6566)
Skylarc Ref J118119
Expected Auction End Time: 7th September 2020 6:43pm
Insize Electronic Edge Finder (6566).
Accuracy: 5µm.
Battery: Type 23AE.
Battery Voltage: 12V.
Brand: Insize.
Contact Diameter: 10 mm.
Light Type: LED.
Measurement System: Metric.
Overall Length: 160 mm.
Shank Diameter: 20 mm.
Analogue Z Axial Preset Gauge (Indicator)–ZOV Type
Skylarc Ref F118115
Expected Auction End Time: 6th September 2020 7:06pm
Analogue Z Axial Preset Gauge (Indicator)–ZOV Type.
For setting tool length on machining centers / lathe centers.
2. Setting height : 50±0.005mm
3. Large measuring surface and easy to operate.
4. Low spring force to avoid breakage of small end mill and drill.
5. Easy to be calibrated by a ground parallel or gauge block.
6. ZIP-50A : Better parallelism, sensitivity, and precision for use.
Insize Electronic Edge Finder (6566)
Skylarc Ref I118118
Expected Auction End Time: 7th September 2020 9:29pm
Insize Electronic Edge Finder (6566).
Accuracy: 5µm.
Battery: Type 23AE.
Battery Voltage: 12V.
Brand: Insize.
Contact Diameter: 10 mm.
Light Type: LED.
Measurement System: Metric.
Overall Length: 160 mm.
Shank Diameter: 20 mm.
Portable Refractometer (RHB - 32ATC)
Skylarc Ref H118117
Expected Auction End Time: 7th September 2020 7:56pm
Portable Refractometer (RHB - 32ATC).
High quality pure aluminum body construction.
Uses ambient light only which means battery or power source is not required.
Easy to focus and calibrate.
Cushioned with soft & comfortable non-slip rubber.
With ATC function (ATC Compensation).
Durable and built to last long.
Portable Refractometer (RHB - 32ATC)
Skylarc Ref G118116
Expected Auction End Time: 6th September 2020 6:18pm
Portable Refractometer (RHB - 32ATC)
High quality pure aluminum body construction.
Uses ambient light only which means battery or power source is not required.
Easy to focus and calibrate.
Cushioned with soft & comfortable non-slip rubber.
With ATC function (ATC Compensation).
Durable and built to last long.
Analogue Z Axial Preset Gauge (Indicator)–ZOV Type
Skylarc Ref E118114
Expected Auction End Time: 7th September 2020 8:44pm
Analogue Z Axial Preset Gauge (Indicator)–ZOV Type.
For setting tool length on machining centers / lathe centers.
2. Setting height : 50±0.005mm
3. Large measuring surface and easy to operate.
4. Low spring force to avoid breakage of small end mill and drill.
5. Easy to be calibrated by a ground parallel or gauge block.
6. ZIP-50A : Better parallelism, sensitivity, and precision for use.
Spitfire DC25 Diesel/Kerosene Workshop Heater (Likely Faulty)
Skylarc Ref W117898
Expected Auction End Time: 6th September 2020 9:28pm
Spitfire DC25 Diesel/Kerosene Workshop Heater (Likely Faulty).
Make: Spitfire
Model: DC25
Fuel Types: Diesel, Kerosene.
Power Input: 240V, 50Hz, 1Ph, 180W, 1.4A.
Heat Output: 0.34bar, 2.2kg/h, 26.00kw.
Movile unit with two wheels at front.
Unit has NOT been tested. Markings suggest unit needs to be "looked at" before functioning, note last electrical test was done 2015.
Electrical start panel has is unsecured - see photos.
Lot of Assorted Aluminum Sheets and Floor Pieces
Skylarc Ref V117897
Expected Auction End Time: 6th September 2020 9:17pm
Lot of Assorted Aluminum Sheets/Plates and Floor Pieces.
31 Individual Pieces.
Includes:
22 x 4mm Honeycomb non slip floor panels ranging from: 2400mm x 640mm to 560mm x 550mm.
5 x Aluminum sheets ranging from: 1200mm x 840mm to 600mm x 590mm.
1 x 4mm Perforated Flooring Panel (2400mm x 840mm)
2 x 10mm Aluminum Slab (2400mm x 615mm, 2300mm x 580mm).
1 x 5mm Aluminum Sheet (3000mm x 1500mm).
Note does NOT include the rack in photos.
Engineering Mill Vice
Skylarc Ref V118131
Expected Auction End Time: 6th September 2020 8:07pm
Engineering Mill Vice.
Made in Taiwan by Auto Wells.
155mm jaw width.
Mounting slots are approx 200mm apart on centre to sides and approx 580mm on centre lengthwise.
Note - Vice crank is missing and therefore NOT included.
Mobile Workshop Table Workbench
Skylarc Ref U118130
Expected Auction End Time: 6th September 2020 6:22pm
Mobile Workshop Table Workbench.
Heavy duty steel frame on heavy Duty Castors.
Plywood top and lower surfaces.
Top surface has 32x 50mm diameter holes for holding Assorted tooling, parts, etc.
Unit shows moderate wear and grime from engineering Workshop usage.
2x Workshop Office Desks
Skylarc Ref T118129
Expected Auction End Time: 6th September 2020 9:13pm
2x Workshop Office Desks.
Large desk is approx 1690x1085x775mm. Has 8x drawers in front and 2x storage compartments in rear.
Small desk is approx 1190x710x770mm. Has one drawer and one foot in front.
Condition - Both units have been used as Workshop office desks. Both show moderate to heavy wear and usage. Workshop grime and dust on units, may benefit from a heavy cleanup.
3 x Industrial Wall Mounted Material Wall Rack Posts
Skylarc Ref U118104
Expected Auction End Time: 7th September 2020 9:40pm
3 x Industrial Wall Mounted Material Wall Rack Posts.
Steel frame construction wall mounted posts.
Two are semi matching (slight dimensions variation) and one is on its own.
See last photos for dimensions.
Workshop Workbench Station
Skylarc Ref S118128
Expected Auction End Time: 6th September 2020 8:47pm
Workshop Workbench Station.
Heavy duty steel frame.
17mm thick plywood work surface approx 1200mm long, 785mm wide, and 810mm above floor.
850mm high backboard with a aluminium shelf 1190x165mm.
2x backside aluminium shelves 270mm and 230mm width.
Total unit height approx 1660mm.
Condition - Unit shows typical workshop wear and usage.
Industrial Workshop Belt Sander
Skylarc Ref T118103
Expected Auction End Time: 7th September 2020 7:20pm
Industrial Workshop Belt Sander.
Unknoen manufacturer and model, possibly custom built.
3-phase 32A power plug.
Includes 3x spare unused Kingspor branded replacement sanding belts type CS 409 Y 40.
Sanding belts are 100mm wide.
Unable to test as no 3-phase 32A outlet available.
Workshop L-Shaped Corner Work Table Workbench
Skylarc Ref S118102
Expected Auction End Time: 6th September 2020 9:46pm
Workshop L-Shaped Corner Work Table Workbench.
6mm thick sheet steel top surface.
12mm thick plywood lower shelf.
Heavy duty steel frame.
Top surface width approx 605mm.
Two bolts in top surface for mounting a Vice.
Shows typical workshop wear and usage.
BOC Smoothcut Plasma 100 Welder and Trolley
Skylarc Ref R117893
Expected Auction End Time: 7th September 2020 7:22pm
BOC Smoothcut Plasma 100 Welder and Trolley.
Input voltage Three phase AC420V ±15%
Frequency 50/60Hz
Maximum rated input current (I1max) 20A
Maximum effective supply current (I1eff) 14A
Rated output current range 20–100A
Output voltage range 20–120V
Duty cycle 60% 100A
Efficiency 85%
Power factor 0.93
Arc initiation Stand off
Maximum cutting thickness (mild steel) 25mm
Air pressure requirement 4-5bar
High Speed Resin Abrasive Wheel Cut Off Machine
Skylarc Ref U117896
Expected Auction End Time: 6th September 2020 9:20pm
High Speed Resin Abrasive Wheel Cut Off Machine.
Wheel Dimensions: 400 x 3 x 25. 4(32).
Voltage: 380V AC.
Periodicity: 50Hz
Revolution: 2242RPM.
Rotational Direction: Left-Hand.
Angle Range of Jaws: 0- +45°.
Power: 2.2Kw.
Motor:
Three phase electrical motor.
2800rpm, 2.2Kw.
50Hz, 4.64A.
Comes with 5 extra disks.
Self Standing Workshop Wall Unit
Skylarc Ref R118101
Expected Auction End Time: 6th September 2020 6:13pm
Self Standing Workshop Wall Unit.
Frame is made from 50x50mm hollow box Steel lengths.
Wall surfaces is 9mm thick MDF boards.
See our other listings for more of these type of units.
Unit would benefit from a second horizontal support beam to make it level, see photos.
Hinged Workshop Wall or Door Unit
Skylarc Ref Q118100
Expected Auction End Time: 7th September 2020 8:14pm
Hinged Workshop Wall or Door Unit.
Frame is made from 50x50mm hollow box Steel lengths.
Wall surface is 9mm thick MDF boards.
This unit is NOT self supporting, it will need to be connected to a building wall or other self supporting unit.
See our other listings for more of these type of units.
Hinged Workshop Wall or Door Unit
Skylarc Ref P118099
Expected Auction End Time: 6th September 2020 9:41pm
Hinged Workshop Wall or Door Unit.
Frame is made from 50x50mm hollow box Steel lengths.
Wall surface is 9mm thick MDF boards.
This unit is NOT self supporting, it will need to connected to a building wall or other self supporting unit.
See our other listings for more of these type of units.
Luxcut Industrial Grade Belt Sander
Skylarc Ref H117883
Expected Auction End Time: 7th September 2020 9:31pm
Luxcut Industrial Grade Belt Sander.
Luxcut branded.
Model No. 752.
Belt size 2000x75mm.
Motor - 3KW, 400V 50Hz.
3-Phase powered.
Condition - Operates normaly. Plastic end guard needs reattaching, see photos. Shows typical engineering Workshop wear and usage.
Chicago Pneumatic CPX40 Refrigerated Air Dryer
Skylarc Ref W117872
Expected Auction End Time: 7th September 2020 8:40pm
Chicago Pneumatic CPX40 Refrigerated Air Dryer.
Make: Chicago Pneumatic.
Model: CPX40.
Refrigerated Air Dryer.
Specifications:
CFM @ 100 PSIG: 43.
Max Pressure: 232.
Power (V, Ph, Hz): 115/230/60/1
Refrig type: R-134A.
Noise (dba): 53.
Please see photos for more detailed specifications.
Unit has NOT been tested.
Industrial Workbench with Backboard & Vice
Skylarc Ref R117867
Expected Auction End Time: 6th September 2020 6:56pm
Industrial Workbench with Backboard & Vice.
Steel frame with wooden tops.
Top workspace dimensions: H2395mm x W1200mm x H900.
Bottom shelf dimensions: L1980mm x W1180mm x H385mm.
Back board dimensions: L1200MM X W55MM X H1200MM.
Vice: Unknown make, bench mounted vice max opening: 145mm x grip length: 125mm.
Includes a white board mounted to backboard.
Condition - Table has moderate ware as to be expected in workshop environment.
Industrial Bench/Shelving Unit
Skylarc Ref Q117866
Expected Auction End Time: 7th September 2020 6:58pm
Industrial Bench/Shelf Unit.
6 leg steel frame with wooden shelve/top.
2 Shelves.
Both shelves are 2400mm x 600mm.
All 4 outer legs have mounting points.
Condition - Steel frame has moderate surface rust and wooden tops have moderate oil stains.
Mobile Workshop Trolley w/ Self Height Adjusting Platform
Skylarc Ref C119048
Expected Auction End Time: 6th September 2020 9:17pm
Mobile Workshop Trolley w/ Self Height Adjusting Platform.
Manufactured by Bishamon, id plate is worn so model number unknown.
Max weight capacity 400kg.
Platform dimensions approx 1010x515mm.
Spring loaded platform cyrently set to 455mm. Appears to be adjustable up to approx 670mm.
Condition - Shows moderate wear and surface grime. Rolls smoothly. Some rusty components.
Steel Workshop or Office Storage Cabinet
Skylarc Ref B119047
Expected Auction End Time: 7th September 2020 6:29pm
Steel Workshop or Office Storage Cabinet.
Precision branded.
2x inner adjustable shelves.
Lockable, key is missing.
Condition - Shows surface finish wear, some small dents, a few rust spots, etc.
Steel Workshop or Office Storage Cabinet
Skylarc Ref Z119045
Expected Auction End Time: 6th September 2020 7:03pm
Steel Workshop or Office Storage Cabinet.
Manufactured by RV Allex Harvey & Sons.
5x inner adjustable shelves.
Lockable, keys are missing.
Condition - Some rust spotting in areas, Finish wear, and some small denting. 3x shelves are missing support brackets.
8x Assorted Lifting D-Shackles & Hamnerlock
Skylarc Ref V119041
Expected Auction End Time: 7th September 2020 8:38pm
8x Assorted Lifting D-Shackles & Hamnerlock.
One large D-Shackle with 50mm inner spacing.
6x Assorted smaller D-Shackles.
Includes 1x Hamnerlock PWB HA800 7-8mm unit.
Condition varies with each unit.
30+ Assorted Hex Keys, in sizes up to 32mm Diameter
Skylarc Ref T119039
Expected Auction End Time: 6th September 2020 9:55pm
30+ Assorted Hex Keys, in sizes up to 32mm Diameter.
Includes assorted sizes. 2x units are 32mm diameter, 4x units are 27mm diameter, all others vary in size from 9mm to 20mm.
Condition varies greatly with each unit.
Pair of Carver T Slot Clamps
Skylarc Ref O119034
Expected Auction End Time: 7th September 2020 8:12pm
Pair of Carver T Slot Clamps.
Light Duty T400/2.
Carver T-slot clamps are patented (0170153), heavy-duty clamps that are used to securely hold workpieces on many different machines and applications.
See last photo for dimensions.
6x Assorted 165-200mm G-Clamps
Skylarc Ref P119035
Expected Auction End Time: 6th September 2020 9:15pm
6x Assorted 165-200mm G-Clamps.
Unknown manufacturers.
Two units are stamped DC Ross.
Inner gap spacing varies from approx 165mm up to 200mm.
Condition - All show moderate wear and use. Some have slight bends to threaded shafts.
58x Pairs of Workshop Gloves
Skylarc Ref N119033
Expected Auction End Time: 7th September 2020 7:16pm
58x Pairs of Workshop Gloves.
Includes:
- 48x pairs of White Cotton gloves with brown wrist trim, size unknown.
- 10x Pairs of green liquid proof gloves. Nine pair are Lynn River brand type 62024, size XL. One pair is Pro EN388, 4221. Includes one extra right hand glove.
Condition - Leftover unused workshop staff stock. Some green gloves show dust/dirt from exposed storage. White gloves in plastic bags.
Assorted Partial Sets of Various Vintage Tap/Die Sets and More.
Skylarc Ref A119020
Expected Auction End Time: 7th September 2020 7:31pm
Assorted Partial Sets of Various Vintage Tap/Die Sets and More.
2 Cases of Tap and Die Partial Set Kits.
1 Case with 5mm Go/No Go Thread Guage.
2 Cases with 14 Die Grinder bits.
Includes 3 Wooden Flat Cases and 2 Wooden Cylindrical Cases.
Please see photos dor specifications.
Drill Press Vice, 125mm Jaws
Skylarc Ref L119031
Expected Auction End Time: 6th September 2020 9:06pm
Drill Press Vice, 125mm Jaws.
Made in Poland.
Model No. PIMa-M125.
Manufacturer unknown.
135mm wide Jaws that open up to approx 105mm.
Includss removable crank handle.
Mounting slots spaced approx 125mm apart width, and 320mm apart lengthwise on centre.
Condition - Moderate surface grime and use marks.
Drill Press Vice, 86mm Jaws
Skylarc Ref J119029
Expected Auction End Time: 6th September 2020 9:45pm
Drill Press Vice, 86mm Jaws.
Unknown manufacturer.
Jaw width 86mm.
Opens up to approx 90mm.
Can be adjusted to the vertical position.
Mounting slots spaced approx 200mm apart on centre.
Condition - Shows moderate surface grime and wear.
Assorted Sheets of Industrial Metal Shims
Skylarc Ref D119023
Expected Auction End Time: 7th September 2020 7:42pm
Assorted Sheets of Industrial Metal Shims.
Assorted Thicknesses, most are unmarked. Marked sheets range from 0.025mm up to 0.305mm.
Sheet size is approx 450x150mm.
Conditiion - Some sheets are bent, some have been cut.
Allen Bradley GuardShield 450L-B Industrial Equipment Safety Light Curtain Set
Skylarc Ref B119021
Expected Auction End Time: 6th September 2020 8:08pm
Allen Bradley GuardShield 450L-B Industrial Equipment Safety Light Curtain Set.
Both matching units are Cat No. 450L-B4HN1200YD.
Each is 1200mm in length.
Includes mounting hardware, instalation instructions, original boxes.
Condition - New never installed units.
2x cases of Assorted O-Rings
Skylarc Ref Z119019
Expected Auction End Time: 7th September 2020 8:25pm
2x cases of Assorted O-rings.
Large 350x270x100mm case filled with bags of Assorted sizes of O-rings.
Smaller 270x160x45mm case of Assorted O-rings.
Condition - O-rings are unused leftover Workshop stock. Exteriors of cases show moderate wear and use from workshop storage.
3x Assorted Electrical Testers
Skylarc Ref Y119018
Expected Auction End Time: 7th September 2020 7:58pm
3x Assorted Electrical Testers.
Includes:
- Anco model AM-932 clamp tester with red and black probes.
- Benning Duspol Combi tester.
- Beha Unitest Moskito tester.
Condition - Anco unit powers on, other two units need new batteries. All show moderate exterior wear and usage.
SANDVK Sandflex VIP 3834-Set-95 Holesaw Set
Skylarc Ref V119015
Expected Auction End Time: 6th September 2020 6:36pm
SANDVK Sandflex VIP 3834-Set-95 Holesaw Set.
Drill pieces: 1130 and 11152.
Circular Saw Blades: 16, 19, 22, 29, 35, 44, 52, 57 and 64mm.
Seems to be missing hex key, unsure if any other parts missing.
Assorted End Mill Cutters by Iscar
Skylarc Ref P119009
Expected Auction End Time: 6th September 2020 7:34pm
Assorted End Mill Cutters by Iscar.
16x total units in a variety of cuttings types, see photos.
Condition - Varies with each unit, some appear unused while others show varying levels of use. Unknown if type number marked on boxes is what is in each case.
6x Assorted Milling Indexable Mill Cutters
Skylarc Ref O119008
Expected Auction End Time: 7th September 2020 7:14pm
6x Assorted Milling Indexable Mill Cutters.
Five units have worn off ID labels so Unknown brand and model for each.
Sixth unit is an Iscar Heli2000 E90A-D20-3-C20-C.
Condition varies with each unit.
Assorted Lot of Milling End Mill Bits & More
Skylarc Ref L119005
Expected Auction End Time: 6th September 2020 7:23pm
Assorted Lot of Milling End Mill Bits & More.
Assorted types and sizes up to 15mm.
Rough estimate of around 50+ loose units.
Includes assorted other components within the cases, see photos.
Condition varies with each unit, a few are as new in cases, most are loose without cases showing varying levels of usage.
80+ Assorted Milling End Mills & Taping Bits
Skylarc Ref K119004
Expected Auction End Time: 7th September 2020 7:09pm
80+ Assorted Milling End Mills & Taping Bits.
Brands include Kennametal, Dormer, Somta, TG, Iscar and more.
Assorted sizes from 2mm to 16mm.
Assorted end mill types.
Includes Assorted tap bits.
Condition - Varies with each unit. Some are new unused while others show varying levels of usage.
18x Assorted Small Milling End Mills by JJ Tools
Skylarc Ref J119003
Expected Auction End Time: 6th September 2020 7:50pm
18x Assorted Small Milling End Mills by JJ Tools.
Includes the following part numbers:
- 2x 8XR1X16X70L
- 1x 1RX2X6X45L.
- 5x 2.5XR0.2X2.5X10X50L.
- 3x 2XR0.2X2X6X45L.
- 3x 4XR0.5X4X13X55L.
- 4x 0.4RX0.8X2X45L.
Condition - All units are new and sealed in cases.
7x Iscar Milling Cutter Bits
Skylarc Ref I119002
Expected Auction End Time: 6th September 2020 8:01pm
7x Iscar Milling Cutter Bits.
Includes the following:
- 4x EC080B20-4C08R0.8L63 *903.
- 3x EC100B22. 4C10R0. 8L72 *903.
Condition - One unit is marked as used (very light use marks). Other units appear as new.
Set of 6 Assorted Parallels
Skylarc Ref R119011
Expected Auction End Time: 7th September 2020 8:17pm
Set of 6 Assorted Parallels.
1x 200mm x 99mm x 20mm.
1x 203mm x 99mm x 20mm.
1x 103mm x 71mm x 19mm. Includes 2 10mm threaded bedding holes.
1x 101mm x 71mm x 19mm. Includes 2 10mm threaded bedding holes.
1x 78mm x 55mm x 22mm. Includes bedding holes.
1x 75mm x 48mm x 20mm.Includes 2 bedding holes.
9x Partial Sets of Milling Index Units
Skylarc Ref H119001
Expected Auction End Time: 6th September 2020 7:30pm
9x Partial Sets of Milling Index Units.
Includes:
- 10x Sandvik R390-11 T3 20E-PM 1030.
- 9x Sandvik R390-11 13 08M-PM 1025.
- 5x Sandvik R245-12 T3 E-PL 1025.
- 8x Sandvik R235-12 T3 E-PL 530.
- 3x Iscar APKT 1003PDR HM90 IC928.
- 4x Iscar APKT 100312TR-RM IC328.
- 19x Iscar XNUW 1003-06 IC28.
- 3x GotoMill 24S.
Condition - Varies with each unit, some appear unused while others show varying levels of usage.
Assorted Lot of Drill Bits
Skylarc Ref J119549
Expected Auction End Time: 6th September 2020 7:59pm
Assorted Lot of Drill Bits.
Partial Evacut and Dormer branded steel case sets.
Approx 50+ Assorted loose drill bits in various sizes from 3mm to 12mm.
Condition varies with each unit, some appear unused while others show varying usage.
2x 20m Workshop Air Hoses
Skylarc Ref I119548
Expected Auction End Time: 7th September 2020 9:14pm
2x 20m Workshop Air Hoses.
Unknown brand.
Model No. HALF1020A.
20m length, ID x OD: 10mm x 16mm.
Working pressure 200psi.
Blue colour.
Condition - One hose is new unused still in manufacturer plastic wrapping, second hose shows light usage.
2x Precision Industrial Triangle Units, 45 and 30/60 Degree Varieties
Skylarc Ref H119547
Expected Auction End Time: 6th September 2020 6:28pm
2x Sets of Double Leg Lifting Chains.
Cases labeled Industrial Tooling Ltd.
Includes 1x 45 Degree unit approx 75x75mm in size.
Includes 1x 30/60 Degree unit approx 86x50mm in size.
Both include a plastic case.
2x Sets of Double Leg Lifting Chains
Skylarc Ref G119546
Expected Auction End Time: 7th September 2020 6:02pm
2x Sets of Double Leg Lifting Chains.
One unit has approx 450mm long chains with 1500kg single leg capacity and up to 2550kg double leg capacity.
Second unit has approx 300mm long chains with 1600kg single leg capacity and up to 2720kg double leg capacity.
Both units have certification expiry dates of 3/2021.
Vertex Touch Point Sensor VPS-20
Skylarc Ref A119514
Expected Auction End Time: 6th September 2020 6:50pm
Vertex Touch Point Sensor.
Model No. VPS-20.
Uses 2x UM5 type batteries (not included).
Includes wood case.
Unit shows few minor signs of use. Unable to test as no batteries of required type available.