Pair of 50L Commercial Beer Kegs (Damaged)

Pair of 50L Commercial Beer Kegs (Damaged).
Vendor states both units might be leaking.

50L Commercial Beer Keg

50L Commercial Beer Keg

50L Commercial Beer Keg

50L Commercial Beer Keg

50L Commercial Beer Keg

50L Commercial Beer Keg

50L Commercial Beer Keg

50L Commercial Beer Keg

50L Commercial Beer Keg

50L Commercial Beer Keg

Lincoln Weldanpower 225 Arc Welder Generator / Power Source

Weldanpower 225 Arc Welder Generator / Power Source.
Powered by Ruggerini diesel engine.
Electric start
1 x 240 volt outlet
Starts and runs but battery needs replacing
Unknown hours.

To see this machine running:
https://youtu.be/z077eXmfTOU

Pedestal Grinder

Model: Ryobi Grindforce 6000
150mm bench grinder
Single phase
Mounted on heavy duty cast stand

Large 3-Phase Industrial Grinder

Large 3-Phase Industrial Grinder.
Made in Australia by WM & AE McLean.
3-phase powered.
600mm diameter by 75mm thick grinding wheels.
Condition - Entire machine rusty and appears to not have been used in some time. Grinding wheels turn freely. Needs hard wiring to power. No control unit included. No safety guards included.

Richmond Radial Arm Drill

Large Richmond radial arm drill press
4 and 3hp motors
12 x spindle speeds
20 - 960rpm
No.4 morse taper spindle
760mm x 560mm T slot table

To see a video of this machine running:
https://youtu.be/2C61z5WLgH0

Heavy Duty Three Phase Grinder

Three phase pedestal grinder
250mm diameter wheels
3hp electric motor
Needs plug

Proarc LS-18 Longitudinal Seam Welding Clamping Bench

Model: Proarc LS-18
Servo motor system with rack & pinion drive
Copper clamping fingers
Copper backing insert in mandrel
Air bag clamping
Pneumatic torch lift
Water cooled mandrel – Upgrades with Stainless steel Mandrel
Pneumatic mandrel clamping
Mandrel spacer
Air powered edge alignment device
Auto gas purge
Automatic finger release
Separate pneumatically clamped run out tab mechanism
Custom loading carriage
Nominal diameter range Ø315mm to Ø700mm
Automated Backing bar cleaning system

3 Phase Roller Table

Powered roller conveyor
1400mm long
50mm diameter rollers
Steel frame
0.37kw three phase motor
Pneumatic swing mechanism
Right angle drive

Kawasaki Workhorse 360 4x4 Quad Bike

Kawasaki Workhorse 360 4x4 Quad Bike.
Circa 2000-2010 Model.
Selectable 4X4/2X4 Differential.
K-EBC Engine Brake Control.
Petrol Powered 360cc Motor.
Condition - Unit cranks by pullstart but does not start, Battery not functional.

Assorted Off-cut Sheets of Stainless Steel

Assorted Off-cut Sheets of Stainless Steel.
Exact number of sheets unknown, estimate around 100x units.
Grades of stainless are unknown.
Sheets vary in size from around 450mm to 600mm in length and around 220mm to 400mm in width.
Thicknesses appear to be around 1mm to 2mm.
All are factory off-cut sheets.

Assorted Off-cut Sheets of Stainless Steel

Assorted Off-cut Sheets of Stainless Steel.
Exact number of sheets unknown, estimate around 100x units.
Stainless sterl grades are unknown.
Sheets vary in size from around 450mm in length to around 300mm in diameter, +/- 100mm.
Thicknesses appear to be around 1mm.
All are factory off-cut sheets.

1982 Mitsubishi 3000kg Rated Dual Fuel Forklift

1982 Mitsubishi 3000kg Rated Dual Fuel Forklift.
Model No. FG30.
Manufactured 18/11/82.
Rated capacity 3000kg x 500mm
Max fork height 4000mm.
3 stage container mast
Pneumatic tyres.
LPG and petrol fuel options (currently running on LPG, petrol option not tested).
Carrage width approx 1000mm.
Fork length 1210mm, width 150mm.
3-stage container compatible mast.
Lift and tilt function levers.
Engine specs Unknown.
14,234 engine run time hours.
Rego plate expired 2018.
WOF expired 2018.
Condition - Shows moderate wear and usage
Note - LPG bottle is NOT included.

To see this machine running:
https://youtu.be/WCQFhAmAjvI

3 Phase Roller Table

Powered roller conveyor
1400mm long
50mm diameter rollers
Steel frame
0.37kw three phase motor
Right angle drive

Large Alignment Table

Large steel framed table
Made for aligning sheet steel
Pneumatic sheet gripper runs on a belt in the middle
Powered by servo motor with pulley system underneath
Surface is made of brushes with guide rollers either side

Large Three Phase Bandsaw

Scott bandsaw
1220mm x 850mm table
Roller table with 440mm of travel
480mm tall throat
750mm wide throat
Coolant pump
Variable speed controller

Proarc LS-18 Longitudinal Seam Welding Clamping Bench

Model: Proarc LS-18
Servo motor system with rack & pinion drive
Copper clamping fingers
Copper backing insert in mandrel
Air bag clamping
Pneumatic torch lift
Water cooled mandrel – Upgrades with Stainless steel Mandrel
Pneumatic mandrel clamping
Mandrel spacer
Air powered edge alignment device
Auto gas purge
Automatic finger release
Separate pneumatically clamped run out tab mechanism
Custom loading carriage
Nominal diameter range Ø315mm to Ø700mm
Automated Backing bar cleaning system

2x Aludec AA3 Flexable Laminate Ducting Lengths, 203mm x 10m Size

2x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 203mm diameter and 10-metres in length.
2x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.

4x Aludec AA3 Flexable Laminate Ducting Lengths, 203mm x 10m Each

4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 203mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.

4x Aludec AA3 Flexable Laminate Ducting Lengths, 203mm x 10m Each

4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 203mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.

4x Aludec AA3 Flexable Laminate Ducting Lengths, 203mm x 10m Each

4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 203mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.

4x Aludec AA3 Flexable Laminate Ducting Lengths, 203mm x 10m Each

4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 203mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.

4x Aludec AA3 Flexable Laminate Ducting Lengths, 203mm x 10m Each

4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 203mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.

4x Aludec AA3 Flexable Laminate Ducting Lengths, 254mm x 10m each

4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 254mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.

4x Aludec AA3 Flexable Laminate Ducting Lengths, 254mm x 10m each

4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 254mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.

4x Aludec AA3 Flexable Laminate Ducting Lengths, 254mm x 10m each

4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 254mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.

4x Aludec AA3 Flexable Laminate Ducting Lengths, 254mm x 10m each

4x Aludec AA3 Flexable Laminate Ducting Lengths.
Manufactured by DEC International.
Each unit is 254mm diameter and 10-metres in length.
4x units in auction.
Condition - As new unused leftover workshop parts supply stock. Some yellowing, denting to boxes from storage.
Photos may be indicative.

Large Sheet Materials Lifter

Custom made pneumatic materials handler
Suction lifters for handling sheet material
lift, lowers and rotates head
4360mm long horizontal air slides
1880mm long vertical air slides
lifting head is 1250mm x 370mm
Adapt for your own use of a huge range of parts

Small Heavy Duty Steel Topped Work Table

Small Heavy Duty Steel Topped Work Table.
Approx 7mm thick steel top plate with and extra 2mm thick sheet welded to the centre, see photos.
Lower plywood shelf.
Appears custom built.
See photos for further design details.

Heavy Duty Steel Topped Workbench

Heavy Duty Steel Topped Workbench.
12mm thick steel topped surface
Lower MDF board shelf.
Appears custom built.
See photos for further design details.

Mobile Workshop Steel Topped Work Table

Mobile Workshop Steel Topped Work Table.
Appears custom built.
2mm thick steel top sheet with 17mm thick plywood below..
40x40mm box Steel frame with adjustable height legs (currently set at approx 910mm).
Mounted on Castors for Mobility.
Top surface has 530x390mm gap in surface, see photos

Bathroom Bathtub w/ Wall Panel & Screen by Englefield

Bathroom Bathtub w/ Wall Panel & Screen.
Englefield branded components.
Includes:
- Duo II Bath Wall 1670mm rectangular flat 2 sides in white, part No. C0970A-0, size 1670mm long side, 760mm short side, 1450mm high.
- Glass Bath Screen "Sapphire", part No. C0655A-0, measures 1430mm tall, 800mm wide.
- Duo II Bath Tub in white, part No. SCN63B43, measures 1670x760x420mm.

Condition - Items appear to be never installed. Some dust from open box storage. Unknown if all original assembly components are included.
See photos for further details on Included components and their condition.

Elliott 70 Series Milling Machine

Model: Elliott 70 Series Model 313
Horizontal/vertical mill
1630mm x 355mm mill table
32 spindle speeds
20rpm - 2000rpm
fitted with aftermarket vertical drive which needs securing
NT40 spindle
Powerfeeds on 3 axis
Three phase
Some accessories

Imcar 4 Roll Hi Tech Hydraulic Plate Rollers

Model: Imcar HTH15-150
3mm capacity
1550mm bending length
150mm top and bottom rollers
130mm side rollers
1500mm high electric vertical support
Detached Siemens NC controller
Hardened and ground rollers 55 - 60 HRC
Automatic ejection of bending pieces
Manufactured 2017
Machine is near new

Custom Made Roller Unload Table

Model: 304b Unload Table
sets
12 x sets of 160mm diameter wheels driven by servo motor via belts
Large pneumatic ram operates tipping mechanism
Heavy duty steel frame with stainless top

2 x 250kg Drums Lincoln Electric Welding Wire

Lincoln Electric welding wire
UltraMag S6 1.2mm
2 x 250kg drums
Kyung IL feeders

2 x 250kg Rolls of Lincoln MIG Welding Wire

Lincoln Electric welding wire
UltraMag S6 1.2mm
2 x 250kg drums
Kyung IL feeders

Assorted Vintage Massey Ferguson Tractor Body Panels

Assorted Vintage Massey Ferguson Tractor Body Panels.
Unknown what age and model of Massey Ferguson Tractors these are removed from.
See photos for further details on the types of panels Included and their general condition.

Massey Ferguson 65 Tractor, not Running

Vintage Massey Ferguson 65 Tractor.
Includes detached rear tyre guards and a side engine panel cover.
Condition - Tractor appears to have been sitting unused for some time. Engine won't start for unknown reasons.
Tyres flat.
Note - Buyer will need to bring appropriate equipment and/or vehicle to remove this non-operating tractor.

Acer Aspire Switch Alpha Hybrid Laptop w/ Intel Core i5 Processor

Acer Aspire Switch Alpha Hybrid Laptop.
Model No. Switch SA5-271P.
Processor - Intel Core i5-6200U at 2.30GHz.
8Gb RAM.
256Gb SSD storage, wiped of old user data and operating system.
12" touch screen.
Keyboard detaches from screen so screen can be used in tablet form.
Note - There is NO operating system installed on or included with this computer!.
Includes charging cable.
Condition - Surface use marks, sticker residue, etc, on unit.

1962 Massey Ferguson 65 Tractor

1962 Massey Ferguson 65 Tractor.
Model: 65.
Serial: SNDY564632.
Diesel 4 cylinder engine displacement either 3.1 or 3.3.
3 speed transmission high/low/reverse.
PTO attached slasher Mower.
Condition - Tyres are in good condition, Fluid leaks on engine and rear differential, missing gauges (see photos), seat is in very poor condition.
Battery is not included.
See Link below for full details:
https://www.tractordata.com/farm-tractors/000/7/3/734-massey-ferguson-65.html

To see this machine running:
https://youtu.be/SKm5uWnCsBU

1963 Massey Ferguson 65 Tractor

1963 Massey Ferguson 65 Tractor.
Model MF-765.
Serial: SNDYW5-90.0017.
4 Cylinder Diesel Engine, Displacement either 3.1L/3.3.
4 speed High/Low/Reverse transmission.
Hydraulic Pump attached to PTO.
Crowd action loader with bucket and forks
Current mounted rear wheel guards are after market, original guards included.
Condition - one rear tyre excellent and one in poor condition, engine runs, Hydraulic lift is limited, suspect Hydraulic fluid leak/low Hydraulic oil.

To see this machine running:
https://youtu.be/uN6uYSJB1Sg

Dell Precision T3600 Computer w/ Intel Xeon Processor

Dell Precision T3600 Computer.
Processor - Intel Xeon E5-1603 at 2.80GHz.
8Gb RAM
Microsoft Windows 7 Pro service key tag attached to casing.
Note - There is NO storage drives installed in this computer!
Nvidia NVS 300 graphics card.
Note - Auction includes computer only. There is NO monitor, power cord, keyboard or mouse included with this computer!
Condition - Powers on and sounds normal when running but unable to view BIOS as special type of DVI cable is needed to attach monitor to video card, see photos.

Stylised Three-dimensional Christchurch City Map Framed Artwork

Stylised Three-dimensional Christchurch City Map Framed Artwork.
Unknown artist.
Frame measures approx 705x705mm.
Roads and shrine on map are all raised approx 3mm above background.
See photos for further design details.
Very stylish, modern decorative artistic map for you home or Office.
May show light dust from our warehouse.

Acer Aspire 5600U All-in-One Computer w/ Intel Core i3 & Windows 10

Acer Aspire 5600U All-in-One Computer.
Manufactured 2013.
Processor - Intel Core i3-3120M at 2.50GHz.
8Gb RAM.
1Tb storage drive, wiped of old user data.
Microsoft Windows 10 reset and reinstalled.
23" LED touch screen.
Nvidia GT 630M graphics.
Optical disk drive.
Note - Auction includes computer only, there is NO keyboard, mouse or power adapter included! Buyer will need to source a 19V, 7.1A power adapter to operate computer.

Nik on CoolPix S3100 Digital Point & Shoot Camera.

Nik on CoolPix S3100 Digital Point & Shoot Camera..
14.0 Megapixels.
5x optical zoom
Includes Nikon battery pack EN-EL19
Includes 4Gb SD card.
Includes USB cable.
Battery charger not included so unable to charge battery to test.

Desktop Computer W/ Intel Processor

Desktop Computer W/ Intel Processor.
Cyclone Computers branded case.
Processor - Intel Core 2 6300 at 1.86GHz.
3Gb RAM
DVD ROM Optical drive.
80Gb storage drive, wiped of old user data and operating system.
Note - There is NO operating system installed on or included with this computer!
Includes Logitech USB Corded keyboard and wireless mouse.
Note - Computer does NOT include a monitor or power cord!
Wireless mouse not tested, it's USB Reciever is stored inside mouse battery compartment.

Verifone VX820 Duet EFTPOS Card Reader

Verifone VX820 Duet EFTPOS Card Reader.
Unable to power on as power adapter is missing.

ViewSonic 27" LED Monitor VA2703-LED

ViewSonic 27" LED Monitor.
Model No. VA2703-LED.
Manufactured in 2012.
D-Sub and DVI inputs.
Includes power cord and D-Sub cable.

ViewSonic 19" LCD Monitor VA1931wma

ViewSonic 19" LCD Monitor.
Model No. VA1931wma.
Manufactured in 2011.
D-Sub and audio inputs.
Includes power cord and D-Sub cable.
Some surface marks, dust from usage.

HP Laptop 15 w/ AMD Processor & Windows 10

HP 15 Laptop Computer.
Model No. 15-bw031AU.
Manufactured 2017.
Processor - AMD A6-9220 Radeon R4 at 2.50GHz.
8Gb RAM
1Tb storage drive, wiped of old user data.
Microsoft Windows 10 reinstalled.
Optical drive.
15.6" screen size.
Includes charging adapter cable.
Some marks on top exterior surface, sticker residue.

Custom Desktop Computer w/ Intel Core i5 Processor

Custom Desktop Computer
Processor - Intel Core i5-4440 at 3.10GHz.
8Gb RAM
Gigabyte Motherboard H81M-S2PH.
500W Naxn PSU.
500Gb storage drive, wiped of old user data and operating system.
Note - There is NO operating system inslalled on this computer!
Note - Auction includes computer only, there is NO monitor, power cord, mouse or keyboard included!
Power button on front is missing cover.

Custom Desktop Computer w/ Intel Core i5 & Windows 10

Custom Desktop Computer
Processor - Intel Core i5-6500 at 3.20GHz
16Gb RAM
250Gb SSD Storage drive, wiped of old user data.
Microsoft Windows 10 reset and reinstalled.
ASUS Motherboard H110M-A/M.2.
Optical drive.
500W Naxn PSU.
Wireless LAN card installed.
Note - Auction includes computer only, there is NO monitor, power cord, mouse or keyboard included!

HP 24 Desktop All-in-One Computer w/ AMD Processor & Windows 10

HP 24 Desktop All-in-One Computer.
Model 24-g062a.
Manufactured 2017
Processor - AMD A6-7310 APU with AMD Radeon R4 Graphics at 2.0GHz.
8Gb RAM
1Tb storage drive, wiped of old user data.
Microsoft Windows 10 reset and reinstalled.
24-inch LCD screen.
Optical drive and webcam built in.
Includes power adapter cable, mouse and keyboard.
Condition - A few marks to screen and front bezel

HP Compaq Elite 8300 SFF Computer w/ Intel Core i5 & Windows 10

HP Compaq Elite 8300 SFF Computer
Processor - Intel Core i5-3470 at 3.2GHz.
4Gb RAM
250Gb Storage drive, wiped of old user data.
Microsoft Windows 10 reset and reinstalled.
DVD-RW Optical drive.
Note - Auction includes computer only, there is NO monitor, power cord, mouse or keyboard included!

HP Compaq dc7800p SFF Computer w/ Intel Processor

HP Compaq dc7800p SFF Computer.
Processor - Intel Core 2 Duo E6550 at 2.33GHz.
6Gb RAM.
DVD ROM Optical drive.
80Gb storage drive, wiped of old user data and operating system.
Note - There is NO operating system installed on or included with this computer.
Note - This auction includes computer only! There is NO monitor, power cord, mouse or keyboard included!

Acer Aspire T Desktop Computer w/ Intel Core i7 & Windows 10

Acer Aspire T Desktop Computer.
Model No. TC-605.
Processor - Intel Core i7-4770 at 3.40GHz.
8Gb RAM.
NVIDIA GeForce GT635 GPU with 2Gb RAM.
Includes one 1Tb hard drive plus a second 2Tb hard drive. Both have been wiped of old user data.
Microsoft Windows 10 is reinstalled for new user.
Optical Disk drive
Integrated LAN card.
Tower measures approx 410mm long, 175mm wide, 380mm tall.
Note - Auction includes computer only! There is NO monitor, power cord, mouse or keyboard included!

Assorted Electronic Accessories, Chargers, Stands, Bluetooth Adapters, More

Assorted Electronic Accessories, Chargers, Stands, Bluetooth Adapters, More.
All items are as new leftover shop retail stock.
All units are Baseus branded.
Includes the following Baseus items:
- 2x inAuto Wireless Reciever
- 1x Duke Universal Travel Charger.
- 2x Type C Male to Type C Female + 3.5mm Female Adapter L40.
- 1x Micro fibre Wireless Charging Reciever.
- 1x Round BOXHUB Adapter for USB.
- 1x Mini USB Female to Type C Male Adapter Converter.
- 1x Back Stuck Silicone Card Bag.
- 1x Desktop phone stand.
- 1x Phone mount for bikes.
- 1x 1m Mini Display Port to HDMI cable.
- 1x 1m HDMI cable.
- 1x 0.5m RJ45 network cable.

Large Lot of Press Die Equipment

Large Lot of Press Die Equipment.

Huge Assortment of Mobile Phone Case Covers for Samsung, Apple, Huawei & More

Huge Assortment of Mobile Phone Case Covers for Samsung, Apple, Huawei & More.
Exact count of items Included is unknown. Estimate around 1000 or more units in this auction.
Includes cases for:
- Huawei P20, P30.
- Samsung Galaxy S8, S8 Plus, S9, S10, S10 us, S20, S20 Ultra, S20 Plus, A20, A30, A70, Note 8, Note 9, Note 10, Note 10 Plus,
- Apple iPhone 5, 6, 6S, 7, 7 Plus, 8, 8 Plus, X, XR, XS, XS Max, 11 Pro,
- Apple iPad Mini (1, 2, 3, 4, 5) Air 10.5, Pro 10.5, Air 2, Pro 9.7, Pad 2, 3, 4.
- Possibly other brands and models as many items are unmarked.
- Also Includes hundreds of screen protectors for many of the above mentioned models.

Condition - As new leftover closed down shop stock. Some have no packaging so unknown what brand/model phone some are for.
See photos for further details on styles, colors, designs of cases included.

Custom Made Large (1920mm) SDS Concrete Drill Bit

Custom Made Large (1920mm) SDS Concrete Drill Bit.
25mm Drill Bit.

Vintage Makita 600mm Diameter Electric Concrete Smoother

Vintage Makita 600mm Diameter Electric Concrete Smoother.
Model No. 4000.
Single phase.
Condition - Old model showing heavy usage and wear. Item powers on and runs but not tested at length. Attached pads have concrete residue on them. A spare as new set of replacement pads is Included.

Assorted Concrete Smoothing Tools

Assorted Concrete Smoothing Tools.
Includes:
- 1220mm wide bullfoat smoother by EF Extrusion Industries with Extendable pole up to 5000mm in length.
- Unknown brand of bullfoat smoother at 1070mm wide plate and 3x 1840mm long attachment pole sections.
- 1800mm green Smoothing bar.
- 610mm wide squeegee Tool.

See photos for further type and condition details.

Bianco Pumpz Water Pump BIA-WP10AA

Bianco Pumpz Water Pump.
Model No. BIA-WP10AA.
1.5hp petrol engine powered
Total head lift 22m
Suction head lift 7m
Max discharge capacity 7m3/h
Diameter of discharge and Suction pipes, 25mm
Pump measures approx 300x300x310mm.
Condition - Pump shows mild usage. Steel pipe filling attached to top, see photos. No fuel in tank so engine untested.

2x Post Hole Digging Tools

2x Post Hole Digging Tools.
Includes:
- Atlas Trades post hole digger model EL67360.
- Bowmac Galvanised digger model SB150.

Cable Ratchet Tool

Cable Ratchet Tool.
Unknown manufacturer and model.
Tool length between each hook is approx 450mm.
See photos for further details on design and type of Ratchet this is and its condition.

46mm Combination Wrench

46mm Combination Wrench.
Unknown manufacturer.

Vintage Hand Held Guillotine Cutter

Vintage Hand Held Guillotine Cutter.
Tool length approx 510mm.
Cutting blade approx 75mm wide.
Cutting gap approx 10mm.
See photos for further Tool design details.
Age of tool unknown.

Vintage Socket and Screwdriver Sets

Vintage Socket and Screwdriver Sets.
13-piece vintage Stanley Screwdriver set with flat and Philips heads. Complete set in 520x215x40mm case.
Assorted 1/2" Drive Sockets with one Reversable Wrench and other assorted 1/2" Drive accessories. Brands in mixed case include Sidchrome, Britool, Tipco. Imperial socket sizes.
Vintage sets. Condition varies with each, see photos.

Assorted Vintage Precision Tooling & Components w/ Wood Case

Assorted Vintage Precision Tooling & Components w/ Wood Case.
Seems to be a mixed Lot of Vintage testing or measuring tools and components. Includes wood case measuring 240x125x75mm.
See photos for further details on Included items and their condition.

Set of Clark Adjustable Fly Cutter Drills

Set of Clark Adjustable Fly Cutter Drills.
Plastic case includes model 101 (10mm Diameter shank) and model 100 (6mm diameter shank).
Condition - Drills show minor usage marks. Case exterior shows storage wear.

Vintage Toyota Carburetor Adjustment Kit 09240-33011

Vintage Toyota Carburetor Adjustment Kit.
Part No. 09240-33011.
Case states kit is compatible with the following Toyota models:
- RT40D
- RT41D
- PT47
- RT60
- RT66
- RT70

Condition - Tools in excellent condition. Case exterior shows moderate wear from years of storage.

Assortment of Welding Protection Equipment

Assortment of Welding Protection Equipment.
2 Welding Masks, 3 Packs of Welding Mask Screens.

Vintage 3/8" Drive Dual Signal Torque Wrench

Vintage 3/8" Drive Dual Signal Torque Wrench.
W&B branded.
Torque range from 1 to 20 Nm or 10 to 180 ft lbs.
Tool measures approx 205mm long.
Condition - Vintage Tool in excellent condition showing just mild usage marks. Original box shows moderate wear and grime from years of storage.

Air Line Filtration Assembly

Air Line Filtration Assembly.
Olympian and Norgren branded internal components.
Compatible with standard 10mm Air hose connections.
Casing measures approx 320x160x405mm.
See photos for further details of internal componets installed.

Assortment of Hand Tools

Assortment of Hand Tools.
1 x Rake.
2 x Brooms.
2 x Shovels.
1 x Handle.

Mixed Lot of Hand Tools, Trades Parts, Accessories & More

Mixed Lot of Hand Tools, Trades Parts, Accessories & More.
Wide range of Assorted items from work lights to pumps, hand tools, Gauges, Assorted parts and accesories, leather Tool pouches, etc.
See photos for further details on items included and their condition.

Assortment of Large Hand Tools

Assortment of Large Hand Tools.
2 x Pickaxes.
2 x Axes.
2 x Cutting Tools.
1 x Prybar (1630mm).
1 x Handsaw (720mm).
1 x Handle.

Vintage Hi Load Tester for 6V and 12V Batteries

Vintage Hi Load Tester for 6V and 12V Batteries.
Manufactured by Lindford Industries.
Tester shows moderate external wear from age and storage. Unit is untested.

KD Tools Piston Ring Filer 870

KD Tools Piston Ring Filer.
Model No. 870
Includes box.
Box is dirty and shows storage wear. Tool in very good condition.

Vintage Fennel Kassel Theodolite w/ Wooden Tripod

Vintage Fennel Kassel Theodolite w/ Wooden Tripod.
Made in Germany.
Age unknown.
Serial number 85430.
Theodolite measures approx 350mm tall.
Inudss steel cover and vintage wooden tripod.
Condition - Theodolite appears in very good condition for its age. Main optics appear clear and focus knob functions normally. Steel case exterior and wooden tripod show more wear from decades of exposure and storage.

Mercedes-Benz Transmission

Mercedes-Benz Transmission.
See photos for part numbers.

Morris MoWog Transmission

Morris MoWog Transmission.

Sykes Pickavant 1/2" Drive Special Purpose Sockets, Imperial Sizes

Sykes Pickavant 1/2" Drive Special Purpose Sockets.
Set part No. 200/5.
Includes sizes:
- 1/4"
- 5/16"
- 3/8"
- 7/16"
- 1/2"

See photos for socket design type details and their condition.
Includes Steel case.

Morris MoWog Transmission

Morris MoWog Transmission.
Please see photos for part numbers.

Hilti DX600 Powder Actuated Nailer w/ Accessories

Hilti DX600 Powder Actuated Nailer.
Includes nail gun, Assorted muzzle attachments, 15x cases of Assorted powder cartidges, 6x boxes of assorted compatible nails, Nailer hard case.
See photos for further details on items included and their condition.

Assorted 3/4" Drive Sockets w/ 2x Reversable Wrenches

Assorted 3/4" Drive Sockets w/ 2x Reversable Wrenches.
Includes:
- 2x 3/4" Drive Reversable Wrenches, one is unbranded, second is Koken model 6752.
- Koken 1 7/8" Socket
- Koken 2" Socket
- Koken 41mm socket.
- Teng Tools 46mm socket.
- Sidchrome 1 1/2" Socket.

See photos for Condition details.

NSK Telescoping Gauges, Imperial Sizes

NSK Telescoping Gauges.
Imperial Sizes from 5/16" to 6".
Condition - Gauges themselves show generally mild usage. Case shows more moderate wear from workshop storage.

TRW Hydraguide Steering Motor

TRW Hydraguide Steering Motor.

Morris MoWog Transmission

Morris MoWog Transmission.

2x Pipe Wrenches by Record and Fuller

2x Pipe Wrenches by Record and Fuller.
Includes:
- Vintage Record No. 24 Wrench, approx 570mm long.
- Newer Fuller 18" wrench, approx 410mm long.

Condition varies with each unit. The vintage Record Wrench shows moderate wear and surface rust. Fuller unit shows mild usage. Jaws operate normaly on both units.

5M 3 Phase 40Amp 500V 50Hz Extension Lead

5M 3 Phase 40Amp 500V 50Hz Extension Lead

Imperial Scale Outer Micrometer, 2" to 6" Size

Imperial Scale Outer Micrometer, 2" to 6" Size.
Unknown msnufacturer.
Model No. 942.
Includes wood case with assorted accessories.
Condtion - Unable to get Scale unit to turn. Wood case shows wear.

Famous Toledo 600mm Swaging Tool w/ Cutter

Famous Toledo 600mm Swaging Tool w/ Cutter.
Part No. 316008.
Cutter jaw gap 6mm.
See photos for details on wire stripping gauge size compatibility.
Includes original box.
Tool shows possible very light usage at the smallest wire hole size, see photos, otherwise tool appears near new. Box shows dust and wear from storage.

Record 930 Bolt Cutters

Record 930 Bolt Cutters.
Made in England.
760mm total tool length.
Jaws approx 40mm long.

Record 942 Bolt Cutters

Record 942 Bolt Cutters.
Made in England.
1080mm total tool length.
45mm long jaws.

4x Hydraulic Bottle Jacks

4x Hydraulic Bottle Jack's.
All units are missing ID labels so manufacturer, model, and Lifting Capacities are all unkmown.
Tallest unit is approx 175mm, shortest approx 130mm
Condition - All units are missing jack pump handles. Three jacks appear to function but have not been tested under a load. The fourth jack does not function properly and needs servicing. All have heavy external grime and wear.

5x Assorted Hydraulic Bottle Jacks

4x Assorted Vintage Screw Jack's.
Includes:
- small red 180mm high jack, unable to read worn ID label, so specs unknown.
- Orange Masda branded jack, model NPD-4M, 4-ton capacity.
- Yellow Toyota branded jack, model No. 110-360041, 4-ton capacity.
- Tall black jack with no ID markings, approx 175mm tall.
- Older vintage jack with a Hydraulic line attachment at base, Jack approx 240mm tall.

See photos for further details on design/type details for each jack.
Condition - The four bottle jack's with built-on pumps appear to all operate but have not been tested under a load. All are missing jack pump handles. The vintage jack without a pump has not been tested.

4x Assorted Vintage Screw Jacks

4x Assorted Vintage Screw Jack's.
Includes:
- Simplex No. 4 Jack, 8-Ton capacity, Made in USA.
- Woden no. 239A/3 Jack, capacity unknown.
- Shorte red unmarked Jack approx 130mm tall.
- Tall slender unmarked Jack approx 295mm tall.

See photos for further Jack design and condition.
Age of jacks are unknown. All seem to function though stiffly as all in need of some lubrication. No jack handle bars included.

Slide Hammer Dent Puller Tool

Slide Hammer Dent Puller Tool.
Tool is marked with "EIVA SPOT EIGHT"
See photos for further Tool design/type details.

3 Assorted Chains

3 Assorted Chains.
1x 3.6M 5mm.
1x 2M 5mm.
1x 4M 4mm.

50-Ton Capacity Bottle Jack, Faulty

50-Ton Capacity Bottle Jack.
Unknown manufacturer or model.
Condition - Both Hydraulic hand pumps are faulty, one pulls out completely when moved and other has very rusted shaft. Unable to get main cylinder to move as a result. No pump handle bars included.

5.5M Lifting Sling 1.5Ton

5.5M Lifting Sling 1.5Ton.

Enerpac Wall Mount Cabinet w/ Assorted Enerpac Spare Parts & More

Enerpac Wall Mount Cabinet w/ Assorted Enerpac Spare Parts & More.
Assorted spare parts for unknown model of Enerpac tools.
Case shows wear and holes in panels.
See photos for further details on items included and condition.

5 Lifting Chains

5 Lifting Chains.
1x 1.6M, 10mm Lifting Chain.
1x 700mm, 10mm Lifting Chain.
1x 900mm, 10mm Lifting Chain.
1x 1.3M, 10mm Lifting Chain.
1x 1.4M, 10mm Lifting Chain.

3 Lifting Chains

3 Lifting Chains.
1x 1.5M 10mm Lifting Chain.
1x 1.6M 10mm Lifting Chain.
1x 1.2M 10mm Lifting Chain.

Partial Roll of Thermakraft Watergate Plus Wall Underlay

Partial Roll of Thermakraft Watergate Plus Wall Underlay.
Roll is approx 1365mm wide, remaining length is unknown.
Inner centre cardboard tube approx 80mm diameter. Thickness of remaining material around tube is approx 15mm.
Leftover unused partial roll. Outer layers will show some dirt from our warehouse floor from being laid out for photos.

2x Assorted Sash Clamps

2x Assorted Sash Clamps.
Includes:
- Record No. 136 clamp approx 930mm long.
- Unknown brand clamp, made in Japan, measuring approx 650mm long.
See photos for further design and condition details.

9x Assorted Lengths of Roller Chain

9x Assorted Lengths of Roller Chain.
Old leftover farm parts supply stock. Packaging shows moderate grime and wear from long term barn storage. Many bags were still sealed but were opened by us for photos and inspection.
Assorted Claas and other brands, done unbranded as well.
Lengths unknown.
See photos for further type details.

2x Main Bearing Sets for Compatible Vintage Massey Ferguson Tractors

2x Main Bearing Sets for Compatible Vintage Massey Ferguson Tractor Engines.
Includes:
- Set No. M3-3-11
- Set No. M3-3-10

See photos for further design/type details.
Condition - Unused never installed old farm parts stock. Boxes show exterior grime from barn storage.

Vintage Antique Vice or Similar

Vintage Antique Vice or Similar.
Unsure as to type of tool or vice this is. Visible markings don't appear to state msnufacturer or model name. Appears to be made in USA.
Measures approx 330mm long (excluding handle), 220mm wide.
See photos for further design/type details.
Device seems to function normally. Two small Rollers are stiff and need some reconditioning and Lube.

Pair of Vintage Shock Absorbers?

Pair of Vintage Shock Absorbers, or similar.
No visible manufacturer marks or model details on units.
Each has a thin 3mm diameter Hollow black plastic tube coming out of each unit. Unsure as to its purpose.
See photos for further details on design of these units.

Assortment of Chains

Assortment of Chains.
1 x 2.2M 10mm Chain.
1 x 1.5M 5mm Chain.
1 x 1.4M 5mm Chain.
1 x 1M 5mm Chain.
1 x 5M 5mm Chain.

2.7M Lifting Chain

2.7M Lifting Chain.
10mm Thickness.

15x Rolls of Masking Tape

15x Rolls of Masking Tape.
APE UNI Tape branded.
All rolls are 19mm wide.
Length of each roll is unknown.

2x Pneumatic Tyre Air Inflators w/ Gauges

2x Pneumatic Tyre Air Inflators w/ Gauges.
Manufacturers unknown. Older looking unit is made in England.
See photos for design/type details for each unit.
Condition varies with each.

16x 215mm Plough Shears

16x 215mm Plough Shears.
Each is marked with "K" and "Made in Denmark".
Each is approx 215mm long, 38mm wide.
See photos for further design/type details.
Items appear unused but show some surface rusting and dust from long term farm barn storage.

4.8M Lifting Chain

Assortment of 5 Lifting Chains.
5mm Chain Thickness.

Assortment of 5 Lifting Chains

Assortment of 5 Lifting Chains.
1x 860mm, 10mm Lifting Chain.
1x 350mm, 10mm Chain.
1x 300mm, 10mm Lifting Chain.
1x 600mm, 5mm Lifting Chain.
1x 900mm, 10mm Lifting Chain.

Large Assorted Vintage Farm Parts, Equipment, Tools, Components & More

Large Assorted Vintage Farm Parts, Equipment, Tools, Components & More.
Wide range of Assorted items removed from farmsite barn storage. Many items appear vintage or antique, some others more recent.
See photos for further details of items Included and their condition.

Assorted Vintage Lifting & Strapping Devices & Tools

Assorted Vintage Lifting & Strapping Devices & Tools.
Lifting Hooks, Pulley, strapping tools, and more. See photos for further details on items included.
Age and condition of each item varies.

12M Chain

12M Chain.
10mm Chain Thickness.

Lathe Component

Lathe Component.
Unknown what manufacturer and model of Lathe this unit was originally for.
Mounting base approx 180x100mm.
Centre shaft approx 30mm diameter.
Height of shaft from base approx 140mm.
See photos for further design details.

12.8M Chain

12.8M Chain.
10mm Thickness.

11x Assorted Eutalloy Metallic Coating Powders

11x Assorted Eutalloy Metallic Coating Powders.
Each bottle is approx 55mm diameter and 80mm tall.
Includes:
- 4x ChromeTec 10680 Eutalloy powder.
- 4x BuildTec 10225 Eutalloy powder.
- 1x BoroTec 10009 Eutalloy powder.
- 1x Eutallite Universal 10092 Eutalloy powder.
- 1x Super BronzeoChrom 10186 Eutalloy powder.

Condition - Most feel full or near full. All very dirty exteriors from long term farm barn storage.

2.2M 3 Point Lifting Chain

2.2M 3 Point Lifting Chain.
5mm Chain Thickness.

9.2M Chain

9.2M Chain.
10mm Thickness.

Pair of 870mm Lifting Chains

Pair of 870mm Lifting Chains.
15mm Thickness.
870mm Length.

4.8M 10mm Chain

4.8M 10mm Chain.

Assorted 2-Jaw and 3-Jaw Pullers

Assorted 2-Jaw and 3-Jaw Pullers.
Various sizes and brands.
Condition varies with each unit.

Ridgid Top Screw Bench Chain Vice BC-410

Ridgid Top Screw Bench Chain Vice.
Model No. BC-410.
Tool shows surface rust, wear and grime.
Unknown if unit is complete, see photos.

4x Magnetic Welding Support Stands

4x Magnetic Welding Support Stands.
Includes:
- 2x units at 190x125mm.
- 1x unit at 160x105mm.
- 1x unit at 120x85mm.

Assorted Livestock Drench Guns, Ear Taggers & More

Assorted Livestock Drench Guns, Ear Taggers & More.
A variety of items in varying conditions. One unit is unused in packaging though packaging shows barn storage wear.
See photos for further details on Included items.

Assorted Tie Rods for Farm Equipment and/or Tractors

Assorted Tie Rods for Farm Equipment and/or Tractors.
Assorted well used tie rods of various sizes and types.. Items removed from farmsite barn storage so assuming they were removed from Tractors or other farm machines.
See photos for further details on items included.

Vintage Brass Bushing Assortment Sets

Vintage Brass Bushing Assortment Sets.
One set is labeled as Microid Self Lube Starter, Generator and Distributor Bushing Assortment. This set Aldo has Car Application Chart, see photos for samples.
Second set is missing its label but seems to have similar, but larger, brass items.
See photos for further details on these sets and their contents and condition.

5x Box End Off-Set Reversable Ratcheting Wrenches

5x Box End Off-Set Reversable Ratcheting Wrenches.
Unknown manufacturer.
Includes millimeter sizes 5.5, 6, 7, 8, 10, 11, 12, 13, 14, and 17.

Large Collection of Vintage & Antique Hand Tools, Boxes

Large Collection of Vintage & Antique Hand Tools, Boxes.
Wide range of tool type and vintage.
Screwdrivers, piers, squares, Cutters, clamps, saws, Tool boxes, Drills, and much more.
See photos for further details on Included items.
Condition varies greatly with each item.

Assorted Irrigation Pipe Connectors, Components

Assorted Irrigation Pipe Connectors, Components.
Assorted sizes and types, see photos for further details.
Condition varies with each unit.

Assorted 110mm Diameter Plastic Sewer Pipe Couplings, Elbows, Connectors

Assorted 110mm Diameter Plastic Sewer Pipe Couplings, Elbows, Connectors.
Inner diameter of most units is approx 110mm.
Most appear unused but obviously have been in outdoor exposed storage for some time as surfaces are very dirty and some yellowing to plastic.

2x Industrial Grease Dispensers w/ Grease Buckets

2x Industrial Grease Dispensers w/ Grease Buckets.
Both units show heavy wear and grime from decades of farm usage and barn storage. Unable to get Pumping mechanisms to operate on either unit. Each may need servicing and a major cleanup.

Assorted Vintage Grease Applicatots, Calking Guns & Fuel Pump

Assorted Vintage Grease Applicatots, Calking Guns & Fuel Pump.
Includes:
9x Assorted grease applicators of Assorted designs.
2x Calking tube guns.
1x vintage hand pump with 70mm long tube.
See photos for further details on each item.
All units removed from farm barn storage and most show heavy wear and usage and surface grime. Unknown if any faulty.

2x Unused Bandsaw Blades

2x Unused Bandsaw Blades.
Wilson Bros Ltd packaging.
Discription = BM
Size as marked on packaging = 2360 x 3/4 x 14.
Both blades are unused old farm supply stock. Some surface rusting on parts of blades and box damage from long term barn storage.
2x blades in auction.

Roll of 3M Resinite Aluminum Oxide 180 Grit Sandpaper

Roll of 3M Resinite Aluminum Oxide 180 Grit Sandpaper.
Roll is 330mm wide, length unknown.
Leftover farm stock. Ends show fading, dust and wear from long term barn storage.

Roll of Black Material

Roll of Black Material.
Unknown manufacturer and material type.
Black material approx 0.4mm thick in a 1250mm wide roll.
Roll length unknown.
See photos for further type details.
Leftover unused farm supply stock. Some dirt on ends from storage.

Roll of Black Wolven Agricultural Sheeting Material

Roll of Black Wolven Agricultural Sheeting Material.
Unknown manufacturer or material type.
Wolven black plastic-like material, see photos.
Roll approx 1800mm wide, remaining length unknown.
Centre cardboard tube approx 60mm diameter. Remaining material thickness around cardboard tube approx 35mm thick.
Leftover farm supply stock.

Roll of Agricultural Black Polythene Film

Roll of Agricultural Black Polythene Film.
Agpac branded tag with roll states roll is 600mm wide, 500-metres long, 35 microns in thickness.
Roll appears unused though cannot verify if any has been cut off previously.

Roll of Agricultural Netting Material

Roll of Agricultural Netting Material.
Unknown manufacturer and material type.
Inner cardboard tube approx 80mm diameter, thickness of remaining material rolled on tube is approx 20mm.
Width 1200mm, length remaining unknown.
See photos for further netting type details.
Leftover unused partial farm supply stock.

Lastic Square Hay Bale Tubing, White/Black 2.53m x 45.7m LF

Lastic Square Hay Bale Tubing.
AT Plastiques branded.
Type White/Black, 4mil/101UM, tube size 2.53m x 45.7m LF.
For sqaure type bales.
As new unused tube roll. Box shows wear and damage from barn storage.

Large Roll of Black Plastic Sheeting

Large Roll of Black Plastic Sheeting.
Unknown manufacturer or roll length.
Centre cardboard tube approx 80mm diameter.
Length of roll unknown.
Plastic sheet Width estimated at 4-metres, determined from measuring each folded section at the exposed end of the roll, see photos.
Roll was removed from farmsite barn stirage. Exposed areas show fading and dirt from barn storage. Age of roll unknown.

Atlas Copco 3-Phase Electric Air Compressor

Atlas Copco 3-Phase Electric Air Compressor.
Type No. FE4EB2.
1.1kW Asea branded 3-Phsse motor.
Item shows moderate surface wear and grime, rusting. Power cord is cracked and missing plug end. Unknown if unit is functional.

Vintage AEG Corded Nibbler KN2.5A

Vintage AEG Corded Nibbler.
Type No. KN2.5A.
230V.
Rated up to 2.5mm thick material.
Condition - Older model showing moderate external grime and wear. Tool powers on and motor sounds OK and Tool appears to operate normally but it has not been tested at length nor motor brushes inspected. Power cord has cracks in casing and will need replacing.

9x Assorted Thread Taper Bits

9x Assorted Thread Taper Bits.
Smallest unit is marked with 3/4 - 14BSPF, P&N HSGT, Z4, Australia.
A second unit has Made in USA visible.
All other units have too much surface rusting to be able to read size/type markings. Most appear to be around 36mm diameter.
Older units showing grime and rusting to surfaces.

Vintage Tractor Engine Component

Vintage Tractor Engine Component.
Only visible markings on unit are "Patent 1412".
Chain spoked wheel approx 120mm diameter.
See photos for further design and type details.
Age of unit unknown.
Item removed from farmsite barn along with a number of other old tractor parts so we are assuming this item is a tractor part as well but are unable to verify.
The wheel does turn along with the rear petruding shaft.

2x Vintage Electric Starter Motors

2x Vintage Electric Starter Motors.
Unknown age of units.
One unit is marked with Made in England, 12V, 252B, 56, 45.
Second unit has no visible ID markings.
Items were removed from farm barn along with other old tractor parts so possibly old tractor Engine starters but cannot verify.

Large Assortment of Socket Wrench Tools and Bits

Large Assortment of Socket Wrench Tools and Bits.
Wrenches, attachments, and bits.
Please see photos for idea of quantity, types and sizes.

Large Assortment of Buffing/Grinding Discs

Large Assortment of Buffing/Grinding Discs.
Please see photos for idea on size and quantities.

Large Assortment of Cutting/Grinding Wheels

Large Assortment of Cutting/Grinding Wheels.
Approx 50 individual units.
Sizes ranging from: 50 to 250mm.
Please see photos for idea of condition.

Assortment of 18 Grinding Discs

Assortment of 18 Grinding Discs.
Please see photos for idea of size and condition
180mm to 240mm.

Assortment of Handtools and Handles

Assortment of Handtools and Handles.
7 Handles, various axes, hoe, saw, etc.
Please see photos.

Vintage Demag 250kg Electric Chain Hoist

Vintage Demag 250kg Electric Chain Hoist.
Age and model number unknown.
Single phase.
Unit is in poor condition having been stored in a barn for decades vry dirty exterior, rotten power cord with no plug at end. Rusty components. Would need a major restoration.

5x Vintage G-Clamps

5x Vintage G-Clamps.
Includes:
- Fuller 4"
- Fuller 2.5"
- Unmarked approx 120mm
- Unmarked approx 220mm
- Unmarked approx 250mm.

Condition - Older units showing age wear and usage. Some threaded rods not aligned to top of clamp. All have their caps at end of rods.

7x Vintage G-Clamps

7x Vintage G-Clamps.
Includes:
- 3x Trojan 8
- 1x Trojan 6
- 1x Trojan 3
- 1x unknown brand 6"
- 1x unknown brand marked with a 17.

Condition - Older units all missing cap at end of Threaded rods. One unut has broken rod. Some bending to rods.

Huge Assortment of Drill Bits

Huge Assortment of Drill Bits.
Sizes ranging from: 50mm x 2mm to 280mm x 30mm.

Large Assortment of Socket Pieces

Large Assortment of Socket Pieces.
Various sizes, please see photos for idea on quantity, size and shape.

Large Assortment of Socket Bits, Drill Bits, and Various Workshop Components

Large Assortment of Socket Bits, Drill Bits, and Various Workshop Components.
3 drawers of Components.
Includes various sockets, drill bits, various workshop items, measuring tapes, fittings, electric components.
Please see photos.

Assortment of Lug Wrenches

Assortment of Lug Wrenches.
See photos for idea on sizes and quantity.

Large Assortment of Wrenches

Large Assortment of Wrenches.
39 Individual pieces.
Sizes and types varry please see photos.

Large Assortment of 14 Hammers

Large Assortment of 14 Hammers.
Various types and sizes please see photos.

8x Assorted Vintage Steel & Brass Sledge Hammers / Mallets

8x Assorted Vintage Steel & Brass Sledge Hammers / Mallets.
5x Steel heads, 1x brass head, 1x copper and steel head, 1x resin head.
Longest handle length approx 550mm.
Condition varies with each unit One unit has broken handle. All appear vintage, ages unknown.

Assorted Vintage Chisels & Pry Bars & More

Assorted Vintage Chisels & Pry Bars & More.
Various sizes of chisels, breaker/pry bars, Anvil accessories and more.
Longest unit approx 850mm.
Condition varies with each unit.

Assorted Vintage Antique Files & Screwdriver

Assorted Vintage Antique Files & Screwdriver.
Variety of sizes and types.
Brands include Surform, Sykes-Pickavant, Trimatool and other unbranded units.
Also includes one antique screwdriver.
Condition varies with each unit.

Assorted Metal Hand Files

Assorted Metal Hand Files.
Assorted shapes, patterns, types. Some appear vintage.
Longest units approx 450mm, smallest units approx 230mm.
Condition varies with each unit. Some show rusting.

Assorted Lifting Hooks & Eyes

Assorted sizes and types, see photos for further details.
Condition varies with each unit. Some appear to be vintage

Vintage Sidchrome Socket Set W/ Vintage King Dick Wrench

Vintage Sidchrome Socket Set. Includes vintage 1/2" Drive King Dick Wrench.
Most sockets are Sidchrome with red banding around them. There are a few newer looking Sidchrome sockets as well as a few Stahlwille and Newland units.
Age of overall set unknown.
Steel case shows rusting and paint flaking.

9.2M Lifting Chain

9.2M Lifting Chain.
10mm thick chain.

3.6 Meter Lifting Chain

3.6 Meter Lifting Chain.
10mm Chain Thickness.
60mm Hook.

Tractor Clutch Plate 899823M91 for Massey Ferguson

Tractor Clutch Plate.
Part No. 899823M91.
For compatible Massey Ferguson Tractors.

Tractor Clutch Plate 887900M91 for Massey Ferguson

Tractor Clutch Plate.
Part No. 887900M91
For compatible Massey Ferguson Tractors.
Unused never installed leftover farm parts stock. Box exterior shows wear and grime from barn storage.

Vintage Triple Head Pipe Threader

Vintage Triple Head Pipe Threader.
Unable to find manufacturer and model details as surfaces are heavily worn and rusted.
Total tool length approx 985mm.

3.6M Lifting Chain

3.6M Lifting Chain.
No data plate with unit.
Lifting capacity unknown.

4x Assorted Morse Taper Drill Shank Adapters

4x Assorted Morse Taper Drill Shank Adapters.
Includes the following sizes:
- 3 to 4.
- 4 to 3
- 4 to 1
- 3 to 2

Condition varies with each unit.

2x 13mm Keyless Drill Chucks

2x 13mm Keyless Drill Chucks.
Includes:
- Metabo-Futuro 13mm Keyless Chuck with approx 12mm diameter shank. This Chuck appears to function normally but not tested under load.
- Validu 13mm Keyless Chuck with Morse Taper No. 2 Shank. This Chuck is faulty as one jaw is missing, see photos.

Seiko 13mm Drill Chuck

Seiko 13mm Drill Chuck.
Includes chuck key.
Shank approx 24mm diameter.

Jacobs 20mm Drill Chuck w/ Morse Taper No. 2 Shank

Jacobs 20mm Drill Chuck.
Made in England.
Model No. 36.
Morse Taper No. 2 Shank.
Chuck key is missing.
3/4" (20mm) capacity.

Vintage SHER Rotary Polisher

Vintage SHER Rotary Polisher.
Model - 7" Polisher.
Age unknown.
Power cord cut off for safety, Unknown if Tool is functional. Internals do move when shaft is turned by hand. May make a good restoration project.

4x Vintage Pipe Wrenches

4x Vintage Pipe Wrenches.
Includes:
- Toyang Power Jaws J1014 Wrench.
- Toyang Power Jaws, model number unknown.
- 2x 14" older Pipe Wrenches of Unknown manufacturer

Condition - The two Toyang Wrenches are in generally good condition. The two unbranded Wrenches are average showing rust and surface grime.

HIT Deluxe 600mm Pipe Wrench plus 2nd Unbranded Wrench

HIT Deluxe 600mm Pipe Wrench plus 2nd Unbranded Wrench.
Includes:
- HIT Deluxe 600mm Pipe Wrench, made in Japan.
- 18" Unbranded pipe Wrench, made in Taiwan.

Jan & Ridgid Branded Pipe Threading Tools

Jan & Ridgid Branded Pipe Threading Tools.
Ridgid model O-R Threader head with 1/2" attachment inserted (head is missing handle).
JAN Threading Head (model unknown) with handle and 3/4" and 1/2" attachments.
Condition - Very grimy surfaces. Tools show moderate wear and usage

Ridgid No. 2 Spiral Watchet Reamer

Ridgid No. 2 Spiral Watchet Reamer.
Tool approx 510mm long.
Max Reamer diameter approx 55mm.
Some surface rust on tool.

Assorted Small Tap & Die Tools & Accessories

Assorted Small Tap & Die Tools & Accessories.
Larger unit is branded Greenfield and measures approx 220mm long.
See photod for details on other Included parts and tools.
Condition - Items show moderate grime and rusting from long term storage, see photos.

2x Cases of Assorted Roll Pins, Imperial Sizes

2x Cases of Assorted Roll Pins, Imperial Sizes.
Both cases have same Imperial Sizes, see photos.
Each case is approx 260x160x35mm.
Condition - Leftover unused partial sets. Some pins have surface rust from long term storage, see photos.

Lot of Assorted Tie-Down Watchet Straps

Lot of Assorted Tie-Down Watchet Straps.
9x Assorted sizes of strap units with 10x w Ratchet units.
Some Ratchet units appear incompatible with strap units.
Condition varies with each unit.

Tractor Selector/Directional Control Valves

Tractor Selector/Directional Control Valves.
Please see photos.
Not one unit is missing handle.
Unknown if units operate.

Pallet of Assorted Farm Equipment & Tractor Parts, Components & More

Pallet of Assorted Farm Equipment & Tractor Parts, Components & More.
Assorted Fastening Hardware, filters, engine components, etc. Wide range of items, many appear vintage. See photos for further details on included items.
Condition varies with each unit. Most show dust, wear from usage and long term farm barn storage.

Singer 10mm Hammer Drill

Singer 10mm Hammer Drill.
Singer No 946-23.
240V, 50Hz, 1.4A, 350W, 1Ph.
Includes chuck key.
Unit has been powered on.

Showa Air Shock 54532-85

Showa Air Shock.
Part No. 54532-85.
Made in Japan.
Main cylinder measures approx 220mm Long, 70mm diameter.
Item shows usage. Unknown if functional.

Assorted Lot of Vintage Pipe Threading Tools

Assorted Lot of Vintage Pipe Threading Tools.
Assorted mixed sizes.
Most units show heavy surface grime from decades of storage.
Most cases missing lids.

3x Vintage Pipe Threading Tools

3x Vintage Pipe Threading Tools.
Heavily rusted surfaces so unae to read manufacturer details on any of the units.
Inner hole Diameters in each are approx 40mm, 50mm and 60mm.
Larger unit missing handle bar on one side.
Old vintage units showing heavy rust, grime and dirt from decades of storage.

Assortment of Power Tools

Assortment of Power Tools.
1 x Bosch GWS 7-115 750W, 115mm Diameter Disc Grinder (Not Functioning).
1 x Unknown Make Grinder (not tested).
1 x Hitachi Grinder (not tested).

3x Vintage Pipe Threading Tools

3x Vintage Pipe Threading Tools.
Handle lengths from 570mm to 640mm.
Old vintage units showing heavy rust, grime and dirt from decades of storage.

3 Assorted Power Drills

3 Assorted Power Drills.
1 x Bosch 0 603 111 003 Single Phase 220V, 1.5Amp, 310Watt, 3000RPM Drill.
1 x Single Phase 10mm 60100 7.2V 800RPM Drill.
1 x WCLF 2156 W4.75, 2.9Amp, 240Volt, 1050RPM, capacity 6mm, 13mm.

Large Pipe Threading Tool

Large Pipe Threading Tool.
Unable to read worn manufacturer name and model markings.
Inner Threading hole approx 70mm diameter.
Tool shows heavy wear and grime. Some broken steel components, see photos.

Pair of Vintage Power Tools

Pair of Vintage Power Tools.
1 x Black & Decker 8" (200mm) Heavy Duty Saw.
220V, 5.5Amp, 1065Watt, 4500RPM, Single Phase.
1 x Wolf NWS1 220/250Volt 470RPM Screwdriver.

2x Hydraulic Rams

2x Hydraulic Rams.
Unknown manufacturer.
Main cylinders each approx 585mm long, 70mm diameter.
Threaded shaft in one unit is approx 35mm diameter.
Condition - Both show heavy usage. One unit missing threaded shaft.

Bosch PSB 500R 500W Impact Drill

Bosch PSB 500R 500W Impact Drill.
Attached Wire Brush Disc.
See photos for specifications.
Unit has been powered on and operates but not tested any further.

Hitachi PDM-230 230mm Disc Grinder

Hitachi PDM-230 230mm Disc Grinder.
Single Phase, 50/60Hz, 7.8Amp, 1700W, 6500RPM.
Disc Dimensions: 230mm x 6mm x 22mm.
Unit has been powered on and operates but hasent been tested further.

Assorted Connecting Links, Shortening Clutches, and Hooks

Assorted Connecting Links, Shortening Clutches, and Hooks.
Includes:
- 9x connecting links, smallest 85x55mm, largest 165x110mn.
- 2x shortening Clutches, each 210x60mm.
- 7x lifting hooks, one unit has Pully attached.
Condition - Most items appear as new unused. Some dust and marks from open storage. Most Connecting links are still in manufacturer packaging.

Hitachi DU-230 230mm Disc Grinder

Hitachi DU-230 230mm Disc Grinder.
Single Phase, 230Volt, 50/60Hz, 9.4Amp, 2000W 6500RPM.
Disc Wheel Dimensions: 230mm x 6mm x 22mm.
Unit has been powered on and functions.

27x Assorted Bow and D Shackles

27x Assorted Bow and D Shackles.
Weight Capacities not marked on units.
Smallest units approx 45x30mm.
Largest units approx 125x75mm.
Condition varies with each unit. Eight units are missing bolts. Some are heavily rusted. See photos for further Conditon details.

Lot of 80x Extension Springs

Lot of 80x Extension Springs.
All units are approx 200mm.long, 30mm diameter.
Condition - All units are previously used. Most have rust on hook ends.
See photos for design details.

Conduit Pipe Bender, 3/4" Size

Conduit Pipe Bender.
3/4" pipe capacity Size.
Unknown manufacturer.

5x Assorted Bow and D Shackles

5x Assorted Bow and D Shackles.
All units have no weight capacity markings on them.
Smallest unit measures approx 160mm long, 100mm wide.
Largest unit measures approx 220mm long, 135mm wide.
Condition - Older units that have moderate rust, most have bolts that cannot be loosened by hand.

7x Assorted D-Shackles

7x Assorted D-Shackles.
No visible weight capacity stamps on any unit.
All are approximately the same size of approx 120mm long, 75mm wide.
Condition - Very rusty surfaces on some units. Bolts hard to turn from rust.

Pair of Special Purpose Lifting Hooks

Pair of Special Purpose Lifting Hooks.
Each is approx 330mm long including ring, and approx 160mm wide.
See photos for further design details.
Rusting and paint flaking to units.

9x Assorted D-Shackles

9x Assorted D-Shackles.
Two units have visible weight capacity markings of 3-ton and 4.5-ton. Others unknown Capacities.
All are approximately the same size of 140mm long, 95mm wide.
Condition - Very rusty surfaces. Bolts hard to turn from rust.

4M Lifting Chain with Hook

4M Lifting Chain with Hook.
Moderate surface rust.

3 x 5 Meter 3000KG Lifting Slings

3 x 5 Meter 3000KG Lifting Slings.
Units will need to be certified.

Assortment of Welding Equipment

Assortment of Welding Equipment.
2 x Welding Helmets, 3 Welding Torches, 7 Gauges, 2 Torches with Hoses and attached (1 with Guage).
Please see photos.

Jetfire Junior 8 LPG Air Forced Heater

Jetfire Junior 8 LPG Air Forced Heater.
Unit has not been tested.

Vintage Toyota Motor STO 0.7Ton Vehicle Screw Jack

Vintage Toyota Motor STO 0.7Ton Vehicle Screw Jack.

4x Irrigation Sprinkler Assemblies

4x Irrigation Sprinkler Assemblies.
Made in Spain by RC Farm
All are Model RC160-S.
Condtion - All appear to be unused leftover farm stock. Some light dust from storage.

13x Assorted Plastic Irrigation Sprinkler Assemblies

13x Assorted Plastic Irrigation Sprinkler Assemblies.
All are 32mm water feed hose size.
All show previous irrigation usage and wear. Unknown if any are faulty.

24x Assorted Metal Irrigation Sprinkler Assemblies

24x Assorted Metal Irrigation Sprinkler Assemblies.
Assorted brands and models including Rainmaker 200 and 400, Rainbird, Nelson, and more.
Twenty units are 32mm water pipe size, four units are 40mm size.
Condition - Appear to be older units that show typical farm irrigation wear and outdoor exposure. Unknown if any are faulty.

Rigid No E36 Pipe Wrench

Rigid No E36 Pipe Wrench.

3x Tractor Counter Weights

3x Tractor Counter Weights.
Two matching units are stamped with HD65 and measure approx 380x255x68mm.
One unit is marked with ATJ8890 and measures approx 425x265x60mm.
Weight of each unit is unknown.
Unknown what brand/model tractor these are compatible with.
Condition - All appear to be old units shows rust. One unut has broken off and missing mounting hook, see photos.

Record No. 936 Bolt Cutters

Record No. 936 Bolt Cutters.
920mm total tool length.
Jaws approx 40mm long.
Made in England.

Vintage Herbert Morris 1.5-Ton Lever Chain Block

Vintage Herbert Morris 1.5-Ton Lever Chain Block.
Age of unit unknown.
Shows dust and rusting from farm barn storage. May benefit from a restoration.

Fuji Puller Lever Chain Block

Fuji Puller Lever Chain Block.
Made in Japan.
Model number and Lifting capacity unknown.
Older model showing typical wear and usage.

Fuji Puller Lever Chain Block

Fuji Puller Lever Chain Block.
Made in Japan.
Model number and Lifting capacity unknown.
Older model showing typical wear and usage.

Pallet of Assorted Industrial Hardware, Fastening, Pipe Fittings, & More

Pallet of Assorted Industrial Hardware, Fastening, Pipe Fittings, & More.
Wide range of Assorted bolts, nuts, various pipe fittings, air fittings, Cotter pins, chain, and more.
Condition varies with each unit. Items removed from farm barn storage so many show durst and surface rusting.
See photos for further details on Included items and condition.

Roll of Wire Mesh Fencing Net

Roll of Wire Mesh Fencing Net.
See dimensions below to get idea on M2.

Light Duty Sack Barrow Trolley

Light Duty Sack Barrow Trolley.
Platform base dimensions: 340mm x 180mm.
Condition - Mismatching castor wheels, one wheel is wobbly, various workshop oil stains.

Fuji FW-20P Air Impact Wrench, 3/4" Drive

Fuji Air Impact Wrench
Model No. FW-20P
3/4" Drive.

Chicago Pneumatic Air Chisel

Chicago Pneumatic Air Chisel.
Model number unknown.
Missing air hose attachment part.

Right Angle Air Impact Wrench, 1/2" Drive

Right Angle Air Impact Wrench, 1/2" Drive.
ID labels are missing so manufacturer and model unknown.

Pair of Elite 500 Watt Flood Lights

Pair of Elite 500 Watt Flood Lights.
1 x 500 Watt Sensor Flood Light.
1 x 500 Watt Flood Light.
Comes with documentation and fastenings.
Units have not been tested.

Pair of Garage Vehicle Jacks

Pair of Garage Vehicle Jacks.
Condition - Unit on left has moderate surface rust, unit on right is missing one castor wheel.
Cannot read lifting capacities.

Assortment of Pry-Bars

Assortment of Pry-Bars.
11 Pry-Bars, lengths ranging from: 430mm to 1900mm.
Various shapes and thickness.

Rodac Air Impact Wrench 634

Rodac Air Impact Wrench.
Model No. 634.
1/2" Drive Size.

Ingersoll Rand Multi Vane Air Drill w/ 3/8" Chuck

Ingersoll Rand Multi Vane Air Drill.
Model number unknown.
3/8" (9.5mm) Keyed Chuck, key is missing.
Some rust on surfaces.

Pair of Vintage Jack Stands

Pair of Vintage Jack Stands.
Heights from: 350mm to 495mm.

Record No 603 Bolt Cutter

Record No 603 Bolt Cutter.
Condition - Unit operates, moderate surface rust, see photos.

Antique Salters Quadrant Balance Scale

Antique Salters Quadrant Balance Scale.
Age unknown.
Measures approx 165mm wide.
Condition - Very rusty metal surfaces. Brass components show tarnishing. Inner spring mechanisms function and hand moves when botton loop is pulled though not tested to full weight capacity. Would benefit from a cleanup and restoration.

Snap-on 4-Piece Pick Set ASA204A

Snap-on 4-Piece Pick Set.
Set No. ASA204A.
Set shows typical usage and wear, see photos.

Vintage Evans 30m Long Steel Measuring Tape

Vintage Evans 30m Long Steel Measuring Tape.
Model No. 300M
Made in USA.
Age unknown.
Chrome steel casing approx 105x105x18mm.
30-metre tape length.
Conditon - Tape shows minor rust marks. Rolls smoothly within casing. Casing exterior shows generally mild marks for its apparent age.

Vintage Redex Service Oil Can Dispenser

Vintage Redex Service Oil Can Dispenser.
Made in England with the numbers 4-60 is stamped below, possibly a manufacturer date but unable to verify?
Red Cone shaped can measures approx 155mm diameter at base and 165mm tall. Total unit height approx 210mm.
Chrome metal removable Dispenser.
See photos for further design and condition details.
Some oil residue in can.

Pallet of Assorted Fastening Hardware, Fittings, Parts & More

Pallet of Assorted Fastening Hardware, Fittings, Parts & More.
Wide range of Assorted items, most appear to be of older vintage. Various bolts, nuts, Chain, pipe fittings, and many other types of Fastening Hardware.
Condition varies with each item. Most are older vintage showing surface rust, wear from use, etc. Items were removed from long term farm barn storage.
See photos for further details on Included items.

Vintage Garage Creeper Trolley

Vintage Garage Creeper Trolley.
Wooden material base.
4 x 50mm Castor Wheels.
See dimensions below.

Portable Hydraulic Power Pack

Portable Hydraulic Power Pack
Includes Hydraulic Pump, ram, ram extension, bases, heads and plunger.
Condition - Pump doesn't work correctly, suspect it needs more hydraulic fluid. Unit shows moderate to heavy usage and could use some tlc.
Please see photos for idea on parts included.

3 x Assorted Cable Reels

3 x Assorted Cable Reels.
Please see photos for idea on cables and lengths.

Large Assortment of Supplies/Drawers

Large Assortment of Supplies/Drawers.
Including but not limited to nuts, bolts, gaskets, tape, caps, parts, and gauges.
See photos for idea on parts and quantities.

JLO Piano 49ccm Motor

JLO Piano 49ccm Motor.
Type: G502BS 2.
No cylinder head

Clutch Disk Plate for Massey Ferguson

Clutch Disk Plate for Massey Ferguson.
Part No. 887889M94 / 1866042M93.
Condition - Never installed leftover old farm parts stock. Box exterior shows wear and grime from barn storage.

Assortment of Tools/Parts/Drawers

Assortment of Tools/Parts/Drawers.
Including but not limited to: hand tools, guages, hex keys, wiring, springs, valves, etc
Please see photos to get idea on items, quantities etc.

Vintage Stronghold Tap & Die Set

Vintage Stronghold Tap & Die Set.
Made in England by The British Tap & Die Co.
Age of set Unkmown.
Main tool approx 570mm long.
Die Inserts 70mm diameter.
Wood case approx 805x230c60mm.
Condition - A few small bits appear to be missing, see photos for details on Included components. Wood case lid is detached from case. Wood case E terior shows heavy grime and wear from decades of storage.

Antique Brass Bourdon Vacuum Gauge by Reid & Co

Antique Brass Bourdon Vacuum Gauge by Reid & Co.
Age of unit unknown.
Brass exterior with brass inner mechanical workings.
Glossy white face that appears yo be of Porcelian or similar material.
Intact cover glass approx. 110mm diameter.
Total diameter measured at back panel approx 154mm.
Condition - Exterior brass casing shows heavy tarnishing from decades of exposure. White Porcelian face has a hairline crack, see photo. Visible inner brass workings appear in excellent condition. Item would benefit greatly from a restoration.

Morris 950cc BMC A Series Engine

Morris 950cc BMC A Series Engine.
Designations: 9M-U-L 260300, 950 2710D, MOWOG, 2A799, RMC 21087/10.
Condition - Unit appears to be in disrepair, could use some TLC.
Would make a great restore project.

Hydraulic Ram

Hydraulic Ram.
Unknown manufacturer.
Main cylinder approx 260mm long and 60mm diameter at widest point.
Shaft approx 35mm diameter..
Unable to move shaft by hand. Unknown if unit is functional.

Vintage Record No. 110 Benchtop Vice

Vintage Record No. 110 Benchtop Vice.
Made in England.
115mm wide jaws.
Condition - Vice unfortunately appears to have been stored outside for some time as it is rusted shut and jaws will not move nor Lever turn. Needs some serious TLC restoration.

Vintage Record No. 75 Benchtop Swivel Vice

Vintage Record No. 75 Benchtop Swivel base Vice.
Made in England.
130mm wide jaws.
Condition - Heavy surface dirt and grime from decades of uaage. Even though very dirty the vice jaw movement is still very smooth and easy. Would benefit greatly from a clean and restoration.

5x K-Line Irrigation Sprinkler Pods

5x K-Line Irrigation Sprinkler Pods.
Unknown manufacturer.
Plastic pods each approx 380mm diameter and 210mm tall.
32mm diameter water line size.
See photos for Sprinkler head type details.
Condition - Items show moderate agricultural irrigation wear and usage. One assembly is missing mount to attach Sprinkler to pod, see photo.

Morris 950cc BMC A Series Engine

Morris 950cc BMC A Series Engine.
Designations: APHM 297524, X143B, MOWOG, 2A221, RMO 21087,5.
Condition - Unit appears to be in disrepair, could use some TLC.
Would make a great restore project.

14x K-Line Irrigation Sprinkler Custom Built Pods, some damaged

14x K-Line Irrigation Sprinkler Custom Built Pods.
Pods are custom cut from old plastic containers with Sprinkler Assemblies mounted inside.
Sprinkler connections are 32mm size.
Condition - Many custom pods are severely broken and need replacing. Sprinkler assrmblies show dust and grime from barn storage. One sprinkling assrmbly is incomplete.
See photos for further condition and sprinkler assembly type details.

Mercedes-Benz 20127107 01 Auto Transmission

Mercedes-Benz 20127107 01 Auto Transmission.
Condition unknown.

Mole Plough Tractor Attachment

Mole Plough Tractor Attachment.

Ammunition Case (c 1986)

Ammunition/Explosives Case (c 1986).
Markings:
Outer: 72, Gren Rifle 40mm, HEDP, Lot GHH 005.
Inner: Lable: Bomb 81mm Mortar - See photos.
Bottom:
B192MK2 PMD 1986 SV551A.
Great collectors item.

Pallet of Assorted Irrigation & Industrial Fittings, Parts, Components & More

Pallet of Assorted Irrigation & Industrial Fittings, Parts, Components & More.
Wide range of Assorted Irrigation and industrial water fittings, Connectors as well as other assorted Fastening Hardware. See photos for further details on Included items.
Condition - Items removed from farm barn storage. Most show moderate to heavy wear and usage. Many vintage items.

38x Dexion Maxi Bin Parts Storage Bins

38x Dexion Maxi Bin Parts Storage Bins.
Includes the following Maxi Bin sizes:
- 25x size 10
-13x size 5.

Also includes 2x unbranded storage bins each about same size as the Maxi Bin 10 units.
Condition - All units show heavy surface dust and grime, would benefit from a clean.

Assorted Vintage Industrial Parts, Components, Fastening Hardware & More

Assorted Vintage Industrial Parts, Components, Fastening Hardware & More.
Items removed from old farm barn storage. Assorted mostly vintage items. Wide range of things on pallet, see photos for further details on Included items.
Condition varies with each unit. Most show age wear, surface rusting, etc

Assorted Vintage Industrial Parts, Components, Fastening Hardware & More

Assorted Vintage Industrial Parts, Components, Fastening Hardware & More.
Items removed from old farm barn storage. Assorted mostly vintage items. Wide range of things on pallet, see photos for further details on Included items.
Condition varies with each unit. Most show age wear, surface rusting, etc

Benchtop Vice

Benchtop Vice.
Unknown manufacturer.
No.3 marked on side.
105mm wide jaws.
Vice missing Turning handle.
Some surface rusting.

Tractor Hydraulic Controller Assembly

Tractor Hydraulic Controller Assembly.
Unknown manufacturer.
Made in Italy in 16/01/03
Stamped with the number codes d06df1beccz180001 and 3042204.
See photos for further design/type details.
Condition - Appears as unused never installed old farm parts stock. Some light surface rust marks from barn storage.

Tractor Oil Pump for Perkins Engines

Tractor Oil Pump for Perkins Engines.
Part No. VPD1000.
Unknown what model of Perkins engines this is compatible with.
Condition - Unused old farm tractor parts stock. Pump has few light surface rust marks from long term storage. Box exterior dirty from age etc.

Honda Powered Tiller/Cultivator

Honda Powered Tiller/Cultivator.
Honda 3.5HP GX110 Motor.
Custom Home Made Muffler.
Approx 400mm Tilling Width.

Villiers Mark 40 Four Stroke Petrol Engine

Villiers Mark 40 Four Stroke Petrol Engine.
Unit has not been tested.
Unknown RPM or HP/kW.

Antique Lister No 12430LR116 3.85HP 1800RPM Diesel Engine

Antique Lister No 12430LR116 3.85HP 1800RPM Diesel Engine.
Vintage engine operational status is unknown.
Would make a good restoration project.

Roll of Red /Orange Fabric

Roll of Red /Orange Fabric.
Manufacturer and material type is unknown.
Dark orange or reddish-otange colour, see photos.
Material thickness 0.5mm.
Roll width approx 1200mm, roll length is unknown.
Condition - Leftover l partial roll. Exposed material may show dust from storage.

Roll of Brown Vinyl

Roll of Brown Vinyl.
Manufacturer unknown.
Vinyl approx 1305mm wide, roll length unknown.
Faux brown leather style with black backing, see photos for further style details.
Condition - Leftover unused partial roll. Some dust on exterior of roll from open storage.

Large Lot of Assorted Drive & Accessory Engine Belts

Large Lot of Assorted Drive & Accessory Engine Belts.
Wide range of sizes and types.
Exact number included is unknown but rough estimate of at least 100 or more units.
Condition - Items show long term dust from farm barn storage. Age of items unknown.

Antique Wooden Bubble Level

Antique Wooden Bubble Level.
Made in Australia by F.R. Low Pty Ltd.
Wood measures approx 610 33x 71mm.
Brass metal hardware with intact and functioning glass bubble tubes, see photos.

Hydraulic Ram, Incomplete

Hydraulic Ram.
Unknown manufacturee and specs.
Main cylinder approx 580mm long, 90mm diameter.
Shaft approx 40mm diameter.
Condition - RAM has been dissasembled and may not be complete. Shaft appears to be pulled all the way out and unable to push it back into cylinder. May need substantial repair or use for parts.

Assorted Vintage Picks & Axes & More

Assorted Vintage Picks & Axes & More.
Age of units unknown.
See photos for further details on items included and their varying Condition.

Assorted Vintage Garden Tools

Assorted Vintage Garden Tools.
Assorted saws, Cutters, trimmers, and more.
Age of items varies.
See photos for further details on specific items included and their condition.

Assorted Vintage Garden Tools

Assorted Vintage Garden Tools.
Assorted pitch forks, rakes, edgers, spades, and more.
See photos for further details on Included items and their condition.

13x Assorted Vintage Shovels & Spades

13x Assorted Vintage Shovels & Spades.
Assorted sizes and types, see photos for further details.
Age of each unit unknown.
Condition varies with each unit.

Workshop Storage Cabinet

Workshop Storage Cabinet.
Steel construction.
5x inner adjustable shelves.
Condition - Exterior is entirely covered in rust. Slightly less rusty inside. Some shelf support pins missing.

Replacement Perkins Engine Intake and Exhaust Valves and Guides

Replacement Perkins Engine Intake and Exhaust Valves and Guides.
Includes the following.
- 16x Engine Guides 33261723.
- 4x Intake Valves 31431281
- 4x Exhaust Valves 31431591.
Condition - Leftover unused old farm parts stock. One each of Valves unpackaged for photos, all others still in manufacturer bags. Boxes show long term storage wear.

8x Tractor Engine Exhaust Valves 31431881

8x Tractor Engine Exhaust Valves.
Part No. 31431881
For Perkins engines 165, 185, 188.
Valves are new unused leftover old farm parts stock.. 1x valve unsealed from packaging for photos only. All others still sealed in packaging. Boxes show long term storage wear and surface grime.

12x Tractor Engine Valves 31431641

12x Tractor Engine Inlet Valves.
Part No. 31431641
For Perkins engines 165, 168, 175, 178, 185, 188.
Valves are new unused leftover old farm parts stock.. 2x valves unsealed from packaging for photos only. All others still sealed in packaging. Boxes show long term storage wear and surface grime.

4x Vintage Tractor Steering Wheels

4x Vintage Tractor Steering Wheels.
Unsure as to manufacturer, possibly Massey Ferguson as we are selling Tractors and other parts with that name, but cannot verify for certain if these steering wheels are that brand
One unit is 450mm diameter, two units are 430mm diameter, one is 380mm diameter.
Items show wear from age and use. May benefit from a restoration.

Stainless Steel Bin, Damaged Feet

Stainless Steel Bin.
Single Walled.
Inner dimensions approx 1270x910x610mm.
Condition - Shows heavy wear and usage. One section of support frame is broken off, see photos. Denting and heavy residue inside unit.

Huge Crate of Steel Nuts, Bolts, Washers

Huge Crate of Steel Nuts, Bolts, Washers.
Thousands of various Fastening Hardware units.
Bolt Diameters range from approx 16mm to approx 22mm.
Visible bolt heads show TB or HT marks, possibly could be other varieties as well within the bin.
Total number of units unknown but likely well into the thousands as they fill a crate interior space that is approx 1750x470x400mm.
Note - Steel bin seen in first few photos is not included. See our other listings for that item.
Condition - Items show long term storage dust, dirt, some rusting. Appears to be a mix of unused and used units. Condition varies with each unit.

Custom Built Workshop Table

Custom Built Workshop Table.
90x40mm wood board top.
Steel frame.
Appears custom built.
See photos for design details

Hydraulic Ram

Hydraulic Ram.
Unknown manufacturer and model.
Main cylinder approx 570mm long, 110mm diameter.
Shaft approx 50mm diamter.
Condition - Unable to move shaft by hand. Some rusting to components.

Custom Built Petrol AC Generator

Custom Built Petrol AC Generator.
Honda G400 10HP Petrol Engine.
Repco HA4000 230V, 50Hz, 4kW Control Unit.
Markon SCD21J 5kVA Generator.

Gas Powered Tilling/Cultivator

Gas Powered Tilling/Cultivator.
4 Stroke Petrol engine.

Tractor Power Take Off Shaft

Tractor Power Take Off Shaft.
Appears to be a series 1 PTO.
Please see photos for types of yoke etc.
Extends from 1300mm to 1800mm.

Hydraulic Ram

Hydraulic Ram.
Unknown manufacturer and model.
Main cylinder approx 900mm long, 100mm diameter.
Shaft approx 50mm.
Condition - Heavy surface rusting. Unable to move shaft by hand.

Hydraulic Ram

Hydraulic Ram.
Unknown manufacturer.
Main cylinder approx 480mm long, 90mm diamter.
Shaft approx 40mm diameter.
Condition - Unable to pull out or turn shaft by hand. Shows rust and wear.

5x Assorted Vintage Field Cultivator Tine Shanks

5x Assorted Vintage Field Cultivator Tine Shanks.
Made from 25x25mm Square steel material.
Approx lengths 840mm.
Condition - Old units showing rust and wear. One unit appears broken, see photos.

10x Assorted Field Cultivator S-Tine Shanks

10x Assorted Field Cultivator S-Tine Shanks.
Lengths approx 535mm.
Condition - All are well used. Many show Welding repairs, see photos.

2-Ton Chain Block by Elephant

2-Ton Chain Block by Elephant.
Older model showing moderate wear and usage

1.5-Ton Chain Block by Tiger

1.5-Ton Chain Block by Tiger.
Shows moderate wear and usage. Some denting to casing.

Single Phase Bench Grinder on Stand

Single Phase Bench Grinder on Stand.
Unknown motor manufacturer.
Custom guards and componets added to unit.
Stand approx 840mm tall.
200mm diameter steel wire disk on left side, 160mm diameter grinding disk.
Condition - Unit shows moderate wear and usage. Inadequate safety guards.

Manually Operated Hydraulic Press

Manually Operated Hydraulic Press.
Appears custom constructed
Hydraulic press unit atrached via G-Clamps, see photos.
Press Capacities unknown.
Condition - Hydraulics do not appear to be functioning. Fluid leaks. Rusty steel components.

13x Massey Ferguson Tractor Engine Inlet Valves 826169M1

13x Tractor Engine Inlet Valves.
Part No. 826169M1 / 1884124M1
For Massey Ferguson FE35 Tractors (Unknown for which engine type)
Valves are new unused leftover old farm parts stock.. 2x valves unsealed from packaging for photos only. All others still sealed in packaging. Boxes show long term storage wear.

12x Massey Ferguson Tractor Engine Inlet Valves 826168M1

12x Tractor Engine Inlet Valves.
Part No. 826168M1.
For Massey Ferguson FE35 Tractors (Unknown for which engine type)
Valves are new unused leftover old farm parts stock.. One valve unsealed from packaging for photos only. All others still sealed in packaging. Boxes show long term storage wear.

Large Hydraulic Ram

Large Hydraulic Ram.
Manufacturer and age unknown.
Shaft approx 85mm diameter.
Cylinder diameter approx 235mm.
Very heavy unit.
Unable to move shaft by hand.
Very rusty.

2x Bendix 65176 Brake Slack Adjuster Assemblies

2x Bendix Brake Slack Adjuster Assemblies.
Both are Part No. 65176
Both show apparent usage, see photos.

Replacement Perkins Water Pump U5MW0023

Replacement Perkins Water Pump.
Model No. U5MW0023.
New unused in sealed manufacturer box. Old leftover farm parts stock. Box exterior shows long term storage wear. Photos of pump are indicative.

Replacement Perkins Water Pump U5MW0023

Replacement Perkins Water Pump.
Model No. U5MW0023.
New unused in sealed manufacturer box. Old leftover farm parts stock. Box exterior shows long term storage wear. Photos of pump are indicative.

Replacement Perkins Water Pump U5MW0023

Replacement Perkins Water Pump.
Model No. U5MW0023.
As new unused leftover old farm parts stock. Unboxed for photos only.

Replacement Perkins Water Pump 41313201

Replacement Perkins Water Pump.
Model No. 41313201.
New unused in sealed factory box. Old farm parts stock. Photos of pump are indicative. Box exterior shows long term storage wear.

Replacement Perkins Water Pump 41313201

Replacement Perkins Water Pump.
Model No. 41313201.
As new unused part. Opened for photos only.

Massey Ferguson Replacement Temperature Gauge 881396 M91

Massey Ferguson Tractor Replacement Temperature Gauge.
Part No. 881396 M91.
As new unused leftover farm parts stock.

Massey Ferguson Replacement Temperature Gauge 881396 M91

Massey Ferguson Tractor Replacement Temperature Gauge.
Part No. 881396 M91.
As new unused leftover farm parts stock.

Claas Oil Filter 133633.0

Claas Oil Filter.
Part No. 133633.0.
As new, unused leftover farm parts stock.

Massey Ferguson Tractor Oil Filter 1577491M91

Massey Ferguson Tractor Oil Filter.
Part No. 1577491M91
Filter measures approx 115mm diameter and 180mm long.
Condition - Unused leftover old farm parts stock. Box shows grime and wear from barn storage

Replacement Water Pump 1885-489M91 for Massey Ferguson Tractors. Part

Replacement Water Pump for Massey Ferguson Tractors.
Part No. 1885-489M91.
Suitable for tractor models TEF20C and FE35.
Condition - Pump appears unused. Box exterior shows grime and wear from long term storage.

Replacement Water Pump 1885-489M91 for Massey Ferguson Tractors.

Replacement Water Pump for Massey Ferguson Tractors.
Part No. 1885-489M91.
Suitable for tractor models TEF20C and FE35.
Condition - New unused leftover old farm parts stock. Box unsealed by us for photos and inspection only. Box exterior shows grime and wear from long term storage.

Replacement Water Pump 1885-489M91 for Massey Ferguson Tractors

Replacement Water Pump for Massey Ferguson Tractors.
Part No. 1885-489M91.
Suitable for tractor models TEF20C and FE35.
Condition - New unused leftover old farm parts stock. Box unsealed by us for photos and inspection only. Box exterior shows grime and wear from long term storage.

Donaldson Hydraulic Filter P550148

Donaldson Hydraulic Filter.
Part No. P550148.
Manufactured August 2008.
As new unused and still sealed in plastic. Box exterior shows storage grime and wear.

Assorted Vintage Fencing Hardware

Assorted Vintage Fencing Hardware.
Spinning fencing wire frame with some 2.5mm Galvanised wire attached.
Assorted wire strainers and strainer hand tools, see photos for further details on items included.
Age of items unknown.
Condition - Rust to spool Holder and tools. Some Porcelian type strainers have damaged Porcelian. Very dirty from barn storage.

Antique "Can Blower & Forge" Post Drill

Antique "Can Blower & Forge" Post Drill.
Unit still operates.
Would make a great restoration project.
Table dimensions: 230mm x 180mm
Drill travel: 115mm to 195mm.

Large Hydraulic Ram

Large Hydraulic Ram.
Unknown make/model or specifications.
Designation on unit: "DV132, X5467-99, 2 14".
Condition: Unit has moderate markings and surface dirt.
See dimensions below:

Bisleys Right Angle Reduction Gearbox

Bisleys Right Angle Reduction Gearbox.
Unit appears to be seized.
Would make a great restoration project.

Assortment of Antique Tractor Parts/Components

Assortment of Antique Tractor Parts/Components.
8 Assorted lights/reflectors.
6 Assorted Dials (Amps, Speed, etc).
Various other parts, see photos

Antique WW2 British Ammunition Case (C207 FSCO II 1943)

Antique WW2 British Ammunition Case (C207 FSCO II 1943).
Two carrying handles.
Two locking latches.
Marking: C 207 - FSCO II 1942
Moderate wear and surface rust.

Antique Black & Decker No 20 Bench Drill Stand (Type B)

Antique Black & Decker No 20 Bench Drill Stand (Type B).
Condition: Moderate surface rust, Lever doesn't move, needs lubrication.
Could use some TLC.

2.5mm Coated Metal Fencing Wire, 22kg Roll

2.5mm Coated Metal Fencing Wire, 22kg Roll.
Length unknown.
Green coating over metal wire.
Leftover farm stock. Some messy loose sections to roll, see photos.
Some dirt, plant material on roll from barn storage.

1x 2.5mm & 1x 3.5mm Galvanised Fencing Wire Rolls

1x 2.5mm & 1x 3.5mm Galvanised Fencing Wire Rolls.
3.5mm roll weighs approx 12.5kg.
2.5mm roll weighs approx 7.2kg.
Roll Lengths unknown.
Rolls Appear to be leftover partial rolls.
Some dirt, plant material on rolls from barn storage.

2.5mm Galvanised Fencing Wire, 24kg Roll

2.5mm Galvanised Fencing Wire, 24kg Roll.
Length unknown.
Appears unused.
Some dirt, plant material on roll from barn storage.

2.5mm Galvanised Fencing Wire, 24kg Roll

2.5mm Galvanised Fencing Wire, 24kg Roll.
Length unknown.
Appears unused.
Some dirt, plant material on roll from barn storage.

2.5mm Galvanised Fencing Wire, 24kg Roll

2.5mm Galvanised Fencing Wire, 24kg Roll.
Length unknown.
Appears unused.
Some dirt, plant material on roll from barn storage.

2.5mm Galvanised Fencing Wire, 24kg Roll

2.5mm Galvanised Fencing Wire, 24kg Roll.
Length unknown.
Appears unused.
Some dirt, plant material on roll from barn storage.

2.5mm Galvanised Fencing Wire, 24kg Roll

2.5mm Galvanised Fencing Wire, 24kg Roll.
Length unknown.
Appears unused.
Some dirt, plant material on roll from barn storage.

7x K-Line Irrigation Sprinkler Pods, Incomplete or Damaged Units

7x K-Line Irrigation Sprinkler Pods, Incomplete or Damaged Units.
Unknown manufacturer.
Plastic pods each approx 380mm diameter and 210mm tall.
32mm diameter water line size.
See photos for Sprinkler head and hose line connector type details.
Condition - Items show moderate agricultural irrigation wear and usage. Three pods have no Sprinkler heads installed, two pods have broken off and missing Sprinkler heads, one pod has incomplete head, one pod with complete head has damaged pod rim. See photos for further Condition details.

4x K-Line Irrigation Sprinkler Pods

4x K-Line Irrigation Sprinkler Pods.
Unknown manufacturer.
Plastic pods each approx 380mm diameter and 210mm tall.
32mm diameter water line size.
See photos for Sprinkler head and hose line connector type details.
Condition - Items show moderate agricultural irrigation wear and usage.

5x K-Line Irrigation Sprinkler Pods

5x K-Line Irrigation Sprinkler Pods.
Unknown manufacturer.
Plastic pods each approx 380mm diameter and 210mm tall.
32mm diameter water line size.
See photos for Sprinkler head and hose line connector type details.
Condition - Items show moderate agricultural irrigation wear and usage.

4x K-Line Irrigation Sprinkler Pods

4x K-Line Irrigation Sprinkler Pods.
Unknown manufacturer.
Plastic pods each approx 380mm diameter and 210mm tall.
32mm diameter water line size.
See photos for Sprinkler head and hose line connector type details.
Condition - Items show moderate agricultural irrigation wear and usage. Some Sprinkler head Assemblies are loosely attached to the pods.

4x K-Line Irrigation Sprinkler Pods

4x K-Line Irrigation Sprinkler Pods.
Unknown manufacturer.
Plastic pods each approx 380mm diameter and 210mm tall.
32mm diameter water line size.
See photos for Sprinkler head type details.
Condition - Items show moderate agricultural irrigation wear and usage.

2.4-metre Aluminium Scaffolding Ladder

2.4-metre Aluminium Scaffolding Ladder.
385mm ladder width.
Folding bottom support assembly approx 400mm in length.
See our other listings for more of these ladders.
Photos may be indicative.
May show some rusty steel assembly brackets, bolts.

2.4-metre Aluminium Scaffolding Ladder

2.4-metre Aluminium Scaffolding Ladder.
385mm ladder width.
Folding bottom support assembly approx 400mm in length.
See our other listings for more of these ladders.
Photos may be indicative.
May show some rusty steel assembly brackets, bolts.

2.4-metre Aluminium Scaffolding Ladder

2.4-metre Aluminium Scaffolding Ladder.
385mm ladder width.
Folding bottom support assembly approx 400mm in length.
See our other listings for more of these ladders.
Photos may be indicative.
May show some rusty steel assembly brackets, bolts.

3.6-metre Aluminium Scaffolding Ladder

3.6-metre Aluminium Scaffolding Ladder.
385mm ladder width.
Folding bottom support assrmbly approx 400mm in length.
See our other listings for more of these ladders.
Photos may be indicative.
Some rusty steel assembly brackets, bolts.

3.6-metre Aluminium Scaffolding Ladder

3.6-metre Aluminium Scaffolding Ladder.
385mm ladder width.
Folding bottom support assrmbly approx 400mm in length.
See our other listings for more of these ladders.
Photos may be indicative.
Some rusty steel assembly brackets, bolts.

3.6-metre Aluminium Scaffolding Ladder

3.6-metre Aluminium Scaffolding Ladder.
385mm ladder width.
Folding bottom support assrmbly approx 400mm in length.
See our other listings for more of these ladders.
Photos may be indicative.
Some rusty steel assembly brackets, bolts.

3.6-metre Aluminium Scaffolding Ladder

3.6-metre Aluminium Scaffolding Ladder.
385mm ladder width.
Folding bottom support assrmbly approx 400mm in length.
See our other listings for more of these ladders.
Photos may be indicative.
Some rusty steel assembly brackets, bolts.

3.6-metre Aluminium Scaffolding Ladder

3.6-metre Aluminium Scaffolding Ladder.
385mm ladder width.
Folding bottom support assrmbly approx 400mm in length.
See our other listings for more of these ladders.
Photos may be indicative.
Some rusty steel assembly brackets, bolts.

Pair of 6-metre Aluminium Scaffolding Support Truss Members

Pair of 6-metre Aluminium Scaffolding Support Truss Members.
59mm diameter hollow aluminium tubing.
2x units in this auction.
See our other listing for another identical pair.

Husqvarna Z246i Zero Turn Ride On Lawn Mower

Husqvarna Z246i Ride On Lawn Mower.
Manufactured in 2016.
46-inch (1168mm) cutting width.
130 run time hours. Briggs & Stratton 23hp 724cc petrol engine.
SmartSwitch ignition.
Condition - Shows typical lawn usage and wear.

To see this machine running:
https://youtu.be/nIHMTz02HXI

Assorted Lengths of Steel Pipes & More

Assorted Lengths of Steel Pipes and more.
Circular and box types lengths
Diameters/widths range from approx 20mm up to 100mm.
Assorted lengths up to approx 6600mm.
Condition varies with each unit. Some are offcuts. Some show rusting.

Gantry Crane

7250mm long
2100mm long driving rails
Includes 2 approx 8 metre long beams, 1 x approx 6 metre beam
Electric 2 ton chain hoist
Removed in operating condition
Control box

Kingsman Hydraulic Punch and Shear

Model: Kingsman PS-90HC
900kn punching force
Punching, shearing, notching, section cutting
Two foot controllers
Machine powers up and hydraulic pump runs but blades don't move.
Possibly out of oil.

3-Phase Drill Mill

3-Phase Drill Press.
Made in Tawain by Rong Fu.
Model No. RF-30
Two ID plates on front, one says its an 8-speed while the other states its a 12 speed, see photos.
Includes attached Keyless Drill Chuck.
Drill table approx 600x240mm.
Includes attached drill Vice.
Mill unit attached to heavy Steel frame that has a drawer with assorted accessories, see photos.
Condition - Older unit showing moderate wear and usage. Old style 3-phase power plug so unable to test.

John Deere Lawn Sweeper, Damaged

John Deere Lawn Sweeper, Damaged.
Unknown model number.
Sweeping width approx 1000mm.
300mm hard rubber wheels
Standard Hitch for connecting to riding lawn mowers.
Condition - Poorly maintained unit. Sweeping mechanism is functioning but only very stiffly, needs lubrication or other maintainence. Green metal body is heavily pealing off paint from moderate rusting. Vinyl catch bag is severely damaged and torn. Bag frame is rusty and bent and one connection of bag frame to sweeper body is damaged.

Horizontal Metal Cutting Band Saw, Single Phase

Horizontal Metal Cutting Band Saw.
Manufacturer name unknown.
Model No. UC-1804.
Manufactured in 1987
Single Phase.
Max material cutting width approx 350mm.
Condition - No on/off switch on Saw, powers on by plugging into Wall and unplugging to turn off. No safety guard over drive belt. Saw shows moderate wear and usage.

NZIG Transpak 180 Welder

NZIG Transpak 180 Welder.
3-Phase.
Includes CO2 tank.
Older model showing moderate wear and usage.

Vintage ESAB K-300 Welder

Vintage ESAB K-300 Welder.
Age unknown.
Likely good for scrap value only as unsafe to operate with exposed cable connections, etc.

Vintage Sonnerdale BPTO No. 3 Right Angle Gearbox

Vintage Sonnerdale BPTO No. 3 Right Angle Gearbox.
Made in Australia.
Age unknown.
Gear ratio details not fully legible on ID plate, see photos.
Shafts will turn by hand.
Shaft diameters are approx 35mm and 30mm.
See photos for further design details.
Unit shows moderate wear and usage.

Small Hydraulic Ram

Small Hydraulic Ram.
Unknown manufacturer.
Shaft approx 25mm diameter.
Housing approx 230mm long.
ID label stamped with the following:
- C1-3987
- N2F-2X100M.

Condition - Unable to move shaft by hand. Housing shows heavy wee and usage. Unknown if functional under pressure.

Hydraulic Ram

Hydraulic Ram.
Unknown manufacturer.
Cylinder approx 500mm long, 70mm diameter.
Threaded shaft end 35mm diameter.
Condition - Shows heavy wear and usage. Rusty. Unable to move shaft by hand. Unknown if unit functional under pressure.

Hydraulic Ram

Hydraulic Ram.
Unknown manufacturer.
Cylinder is approx 350mm long, 100mm diameter.
Shaft 40mm diameter.
Item shows moderate wear and usage. Cannot turn or move shaft by hand. Unknown if unit is functional.

Hydraulic Ram

Hydraulic Ram.
Unknown manufacturer.
Cylinder length approx 380mm, max diameter approx 100mm.
Shaft 45mm diameter.
Item shows heavy industrial wear and usage. Unable to move shaft by hand. Unknown if functional under pressure.

Hydraulic Actuator Unit

Hydraulic Actuator Unit.
Unknown manufacturer.
Main cylinder approx 240mm long, 80mm diameter.
Total unit length approx 450mm.
See photos for further details on design of unit.
Shaft does not move by hand. Unknown if unit is functional.

Small Hydraulic Ram

Small Hydraulic Ram.
Unknown manufacturer.
Main cylinder approx 300mm long, 65mm diameter.
Shaft approx 20mm diamter, 240mm long.
Unit shows moderate wear and usage. Unknown if functional under pressure.

Small Hydraulic Ram

Small Hydraulic Ram.
Unknown manufacturer.
Main cylinder approx 245mm long, 55mm diameter.
Shaft 25mm diameter, 110mm long.
Condition - Shows moderate wear and usage. Unknown if functional under pressure.

Short Hydraulic Ram

Short Hydraulic Ram.
Unknown manufacturer.
Cylinder approx 200mm long, 90mm diameter.
Shaft 30mm diameter, approx 150mm long.
Condition - Shows industrial wear and usage. Shaft does move, fluid squirts out one connection when moved. Unknown if functional under pressure.

Hydraulic Ram

Hydraulic Ram.
Unknown manufacturer.
Main cylinder approx 420mm long, 90mm diameter.
30mm diamter shaft.
Shaft extends up to 300mm.
Condition - Shows heavy usage and wear. Can extend saft by hand. Unknown if functional under pressure.

Hydraulic Ram

Hydraulic Ram.
Unknown manufacturer.
Main cylinder approx 425mm long, 75mm diameter.
Shaft approx 25mm diameter.
Condition - Very rusty, appears to have been outside for some time. Unable to move shaft by hand.

Hydraulic Ram

Hydraulic Ram.
Unknown manufacturer.
Main cylinder approx 480mming, 100mm diameter.
Shaft approx 35mm diameter.
Condition - Heavy rust flaking on unit. Can pull shaft out Part way by hand. Shaft shows rusting. Unknown if unit functional.

Pneumatic Air Ram

Pneumatic Air RAM.
Unknown manufacturer.
Main cylinder length approx 710mm, 85mm diameter.
Shaft diameter 25mm.
Total length between mounting points when fully extended approx 1550mm. Closed length approx 950mm.
Condition - Shows rusting and dirt from outdoor exposure. Ram can be pulled out by hand and can feel resistance and air moving within unit. Unknown if functional under load.

Hydraulic Ram

Hydraulic Ram.
Unknown manufacturer.
Main cylinder approx 840mm long, 80mm diameter.
Shaft approx 25mm diameter.
Unit shows heavy wear. One cylinder retention rod section is broken off. Shaft can be turned by hand. Unknown if unit is functional.

Hydraulic Ram

Hydraulic Ram.
Unknown manufacturer.
Cylinder length excluding mounting loops approx 750mm.
Approx 95mm diameter.
Total unit length approx 970mm.
Rough unit showing rusting, grime from outdoor exposure. Some fluid can be seen in one connection spot, see photos. Unknown if functional.

Pair of Antique Iron Wheels

Pair of Antique Iron Wheels.
Age unknown.
Each is approx 700mm diameter with approx 125mm width.
Width at axle mount approx 270mm.
Wheels show heavy rusting and dried soil from long term outdoor exposure. Very heavy and solid. Would be a good restoration project.

Husqvarna LRH130 Hydrostatic Riding Lawnmower

Husqvarna LRH130 Riding Lawnmower.
Hydrostatic transmission drive.
Briggs & Stratton Diamond I/C 13hp petrol engine.
Approx 900mm grass cutting width.
Run hours unknown.
Manufacture date unknown.
Condition - There is NO battery installed in mower so unable to test run. Sun faded paint. Some moderate rusting and paint pealing in areas. Mower deck safety cover missing. Tyres feel firm. Steering feels normal. Modified front bumper bar.

8x Mill Drills w/ Morse Taper Shanks

8x Mill Drills w/ Morse Taper Shanks.
Drills have no. 4 size shanks.
Assorted Imperial Sizes from 1 13/32" to 1 3/4".

4x Mill Drills w/ Morse Taper Shanks

4x Mill Drills w/ Morse Taper Shanks.
Three Drills have no. 4 size shanks and one Drill has no. 5.
Assorted Imperial Sizes.
2 1/16"
1 29/32"
1 13/16"
1 63/64"

Industrial Hand Pump

Industrial Hand Pump.
Unknown manufacturer.
Attached 1200mm long, 45mm diameter pipe.
See photos for further design details.

Record No. 414 Mill Vice

Record No. 414 Mill Vice.
Jaw width approx 103mm.
Jaws open to approx 75mm.
Mounting slots spaced approx 130mm apart on centre.
Vice shows heavy industrial wear and usage. Heavy Drill hole damage on jaw slide surface, see photos.

Welding Cable Assembly w/ BOC 4000 Attachment

Welding Cable Assembly.
Includes BOC 4000 Attachment, see photos.

BOC Welding Acetylene Regulator w/ Hose & Incomplete Torch

BOC 8000Welding Acetylene Regulator.
Includes length of hose and incomplete torch assrmbly, see photos.

BOC 320R (320A) Mig Welder with BOC WF2 Wire Feeder

BOC 320R (320A) Mig Welder with BOC WF2 Wire Feeder.
Please note this unit is not functioning - See Lockout Label.

Large Glass Mobile Display Shelving

Large Glass Mobile Display Shelving.
Unit is in disrepair.
Would make a good fixer upper.
Glass the smashed but seems structurally sound.
Great DIY project.

BMW Wheel Bearing & Hub Assembly Tool for Select BMW Vehicles

BMW Wheel Bearing & Hub Assembly Tool for Select BMW Vehicles.
Part No. 312110.
Used to install the front wheel bearing and assembly components.
Compatible with select with select BMW models of E24, E28, E36, E46, E85, E86.
Condition - Tool shows very few minor signs of usage.
See the weblink below for further item details as well as a more complete list of compatible BMW vehicle models:
https://www.pelicanparts.com/More_Info/312110.htm?pn=312110-M1229&SVSVSI=8349

Koken 4012M 10 Metric 1/2"Drive Inhex Socket Set

Koken 4012M 10 Metric 1/2"Drive Inhex Socket Set.

Acer Aspire 3 A315-32 C3WY Laptop

"Acer Aspire 3 A315-32 C3WY Laptop
Processor: Intel Celeron N4100 Quad Core 1.1Ghz
Memory: 4 GB
Storage: 500 GB
Display Adapter: Intel UHD 600
Screen: 15.6"" WXGA HD (1366x768).
Operating System: Windows 10 Home 64-bit.
External Ports 2 x USB 2.0, 1 x USB3.2 Type A, 1 x HDMI, 1 x Ethernet (RJ45), 1 x Headphone/Mic Port.
Other Features: 2 Built-in speakers, 0.3mp front-facing camera, Bluetooth, Wi-Fi 5 (802.11ac), Ethernet.
Includes: Charger.

Vintage Lesco Automotive Mirror

Vintage Lesco Automotive Mirror.
Age unknown.
Made in New Zealand.
Mirror diameter approx 105mm.
Crome bar approx 330mm in length.
See photos for further design and condition details.

4-Piece Brad-Point Countersink Wood Drill Bit Set

4-Piece Brad-Point Countersink Wood Drill Bit Set.
Unknown manufacturer.
6mm, 5mm, 4mm, and 3mm diameter bits.
Bits are removable from their shanks.
3mm bit has been previously replaced, see photos.

2x Pierlite 50W Mercury Vapour Light Ballasts

2x Pierlite 50W Mercury Vapour Light Ballasts.
Both units are Cat No. NB150/50MV
240V, 50Hz, 0.31A
Each unit is approx 315x65x50mm.
Condition - As new unused leftover workshop parts stock. Boxes show tears from storage.

1-Ton Lever Chain Hoist

1-Ton Lever Chain Hoist.
Unknown manufacturer.
1.5m long chain.
5.6mm chain diameter.

NT50 Type Mill Tool Holder w/ Attachment

NT50 Type Mill Tool Holder.
Unable to see any manufacturer or model markings on either the tool Holder or the attachment.
Attachment approx 100mm long, 45mm diameter.
See photos for further details on tool Holder and attachment type.

3M Spraying Respirator Kit 6251 A1P2

3M Spraying Respirator Kit.
Kit No. 6251 A1P2.
Respirator size = Large
Includes:
- 3M 6000 Series half face Respirator.
- pair of 3M Vapor Cartidges 6051, A1.
- pair of particulate filters 5925, P2.
- pair of filter retainers 501.
- 2x Respirator cleaning Wipes 504.
- 3M respiratory protection guide.
- Plastic storage container.
Condition - Items are new unused, removed from container for photos only.

Moore and Wright Depth Micrometer

Moore and Wright Depth Micrometer Set
Up to 8" rods
Imperial
Case

ViewSonic ViewPad 7 Android Tablet

ViewSonic ViewPad 7 Android Tablet
Model No. VS13761
Android version 2.2
154Mb internal storage with 8Gb micro SD card included.
Includes case, mini USB cable, wall charger.
Item has been wiped and reset for new user.
Older model unit showing minor signs of usage. Case shows some dust.

Enermax Revolution 85+ Silver 1020W Modular Computer Power Supply PSU Unit

Enermax Revolution 85+ Silver 1020W Modular Computer Power Supply PSU Unit.
Model No. ER1020EWT.
1020W max output.
Condition - Unknown it unit is used or how much use it may have had. Appears to be missing some modular cable components, see photos for details on Included components.
Includes main power cord.

Canon i-SENSYS LBP3250 Printer

Canon i-SENSYS LBP3250 Printer.

Shimano 45kg Hanging Stainless Steel Tube Scale

Shimano 45kg Hanging Stainless Steel Tube Scale.

Metabo Electric Die Grinder

Model: Metabo GE 710 Plus
Variable speed
10000 - 30500 rpm
710 watt

IBC Tank Heating Blanket

Model: Argus Heating 15-1788A
Single phase
2 x three pin plugs, one for each element
Individually variable temperatures
1000mm tall x 4450mm long
Temperature 90c

Hilti DX A41 Powder Actuated Fastening Gun w/ Case

Hilti Powder Actuated Fastening Gun.
Model DX A41.
Includes case.
Three are NO. powder cartidges included.
Condition - Tool shows typical, construction wear and use. Plastic case shows moderate damage, see photos.

Extech J/K Thermometer Datalogger 422130

Extech J/K Thermometer Datalogger.
Model No. 422130.
Includes AC Power Adapter, user manual, two types of leads, see photos, and case.
Condition - Powers on and startup test passes, see photo. Not further tested. Shows some exterior grime and wear.

Starrett Hole Gauge

Model: Starrett 690M-3
3.3-5.7mm
In case

16x Assorted Lathe Cutting Turning Tools

16x Assorted Lathe Cutting Turning Tools.
Includes:
- 8x Speedwell Hyper tools each approx 155x25x5mm.
- 2x Fagersta WKE 4 Sweden tools.
- 2x P&N NZ Cobalt Special tools.
- 4x Assorted other unmarked tools.
Condition - Varies with each unit. Some appear as new and unused while others show varying levels of usage, see photos.

60x Adjustable Decking Support Shims

60x Adjustable Decking Support Shims.
Moonbay Industrial Corp branded.
14mm T-bade to 19mm T-Head type, see photos.
New leftover tile shop stock. Count not verified.

60x Adjustable Decking Support Shims

60x Adjustable Decking Support Shims.
Moonbay Industrial Corp branded.
14mm T-bade to 19mm T-Head type, see photos.
New leftover tile shop stock. Count not verified.