Skylarc

Skylarc's Christchurch Engineering Auction

15x Assorted Threading Teeth Inserts for Threading Tool
15x Assorted Threading Teeth Inserts for Threading Tool

Skylarc Ref E118764

Expected Auction End Time: 7th September 2020 7:04pm

15x Assorted Threading Teeth Inserts for Threading Tool.
Unknown what specific model of Threading tool these are compatible with. At least three different branding labels on units, they include The British Tap & Die Co, BSP Stronghold, GAS Stronghold.
See photos for further details on type of items in auction.

Wilden Air Pump Unit
Wilden Air Pump Unit

Skylarc Ref D118763

Expected Auction End Time: 6th September 2020 6:16pm

Wilden Air Pump Unit.
Unsure of modrl number, possibly 00-2000-20-700.
See photos for further details on type of pump.
Overall dimensions are approx 260x145x130mm.
Condition - Unit shows exterior grime and use marks. Some water still in unit.

Micro Mist Separator w/ Filter Regulator
Micro Mist Separator w/ Filter Regulator

Skylarc Ref C118762

Expected Auction End Time: 7th September 2020 8:55pm

Micro Mist Separator model AMH150-02D-T.
Regulator model AW3000.
Manufacturer is unknown.
Items show use.

3x Partial Sets of Mill Cutter Index Inserts by Iscar & Sandvik
3x Partial Sets of Mill Cutter Index Inserts by Iscar & Sandvik

Skylarc Ref B118761

Expected Auction End Time: 6th September 2020 6:11pm

3x Partial Sets of Mill Cutter Index Inserts by Iscar & Sandvik.
Includes the following:
- 9x Sandvik Coromant CoroKey R390-17 04 08E-NL, H13A.
- 6x Iscar ADKT 150516R-HM.
- 3x Iscar inserts, type number Unknown as all ID labels are missing from case.
Condition - Most appear unused, some show light use. Cases show grime and wear.

Assorted Milling Edge Finders & Small Dead Center Units
Assorted Milling Edge Finders & Small Dead Center Units

Skylarc Ref A118760

Expected Auction End Time: 7th September 2020 6:20pm

Assorted Milling Edge Finders & Small Dead Center Units.
9x Edge Finder shafts in lengths varying up to 58mm.
8x small Dead centre units? Diameters of these range from approx 17mm to 24mm.
See photos for further details on what is included in auction.
Condition varies with each unit. Some edge Finders are bent.

16x Kemmer 1.2mm Mini Milling Drill Bits
16x Kemmer 1.2mm Mini Milling Drill Bits

Skylarc Ref Z118759

Expected Auction End Time: 6th September 2020 6:57pm

16x Kemmer 1.2mm Mini Milling Drill Bits.
Shank Diameters are 3mm.
Case shows exterior grime and wear from workshop storage. Drill Bits are unused leftover stock.

Hioki Model 3000 Analog Electrical Multimeter
Hioki Model 3000 Analog Electrical Multimeter

Skylarc Ref Y118758

Expected Auction End Time: 7th September 2020 7:12pm

Hioki Model 3000 Analog Electrical Multimeter.
Includes probes, user manual, case.
Case exterior shows moderate grime and wear from workshop usage.

6x Pairs + 3x Loose Blocks of Mill Stepped Angle Blocks
6x Pairs + 3x Loose Blocks of Mill Stepped Angle Blocks

Skylarc Ref X118757

Expected Auction End Time: 6th September 2020 7:12pm

6x Pairs + 3x Loose Blocks of Mill Stepped Angle Blocks.
Five pairs are each block approx 67mm long, 60mm wide, 63mm thick.
One pair is each block approx 60mm long, 57mm wide, 57mm thick.
Includes 3x Loose individual blocks each a different size.
All show Workshop wear and usage

4x Pairs of Mill Stepped Angle Blocks
4x Pairs of Mill Stepped Angle Blocks

Skylarc Ref V118755

Expected Auction End Time: 6th September 2020 9:32pm

4x Pairs of Mill Stepped Angle Blocks.
Eight individual units in four pairs.
All are approx 140mm long, 83mm wide, 37mm thick each.
All show Workshop wear and usage

Mixed Lot of Assorted Chuck Keys, Mill Bits, & More
Mixed Lot of Assorted Chuck Keys, Mill Bits, & More

Skylarc Ref U118754

Expected Auction End Time: 7th September 2020 6:43pm

Mixed Lot of Assorted Chuck Keys, Mill Bits, & More.
Includes assorted drill Chuck Keys, Lathe Chuck Wrench, vintage looking mil bits, assorted other Wrenches, lightweight hanging scale, Morse Tapper adapter, and more. See photos for further details on what is included.
Condition varies greatly with each unit.

Assorted Lot of Dowty Washers, Various Metric & Imperial Sizes
Assorted Lot of Dowty Washers, Various Metric & Imperial Sizes

Skylarc Ref S118752

Expected Auction End Time: 7th September 2020 9:28pm

Assorted Lot of Dowty Washers, Various Metric & Imperial Sizes.
JM Davie Limited brand.
Assorted sizes, see photos.
Leftover unused workshop stock. Cases show exterior dust and grime from workshop storage.

30+ Assorted End Mill Cutters & Drill Bits
30+ Assorted End Mill Cutters & Drill Bits

Skylarc Ref Q118724

Expected Auction End Time: 6th September 2020 9:45pm

30+ Assorted End Mill Cutters & Drill Bits.
Assorted Ball Nose, Flat Nose, Reamer, Jobber Drill, and other related types of end Mills.
Sizes range from 3mm up to 25mm.
Condition varies with each unit. Most appear unused while a few others show generally light signs of usage. Includes cases show exterior grime and wear from workshop storage.

Assorted Lot of Pull-out Steel Dowel Pins, Tension Pins, & More
Assorted Lot of Pull-out Steel Dowel Pins, Tension Pins, & More

Skylarc Ref R118751

Expected Auction End Time: 7th September 2020 9:18pm

Assorted Lot of Pull-out Steel Dowel Pins, Tension Pins, & More.
Most items are Pull-out and tension type steel pins in wide variety of sizes. Hundreds of units. Aldo includes a case of small copper Washers and a case of small screws. See photos for further details on what is included.
Condition - Leftover unused workshop supply stock. Bags a D cases dirty from workshop storage.

14x Spools of Mitchell's Abrasive Cord, Assorted Sizes
14x Spools of Mitchell's Abrasive Cord, Assorted Sizes

Skylarc Ref P118723

Expected Auction End Time: 6th September 2020 8:39pm

14x Spools of Mitchell's Abrasive Cord, Assorted Sizes.
Assorted sizes and grits.
Condition - Most shoe exterior grime and wear from workshop usage. Most are partials with varying amounts of product remaining in each.

2x Sick Inductive Proximity Sensors IM05-0B8NS-ZW1
2x Sick Inductive Proximity Sensors IM05-0B8NS-ZW1

Skylarc Ref O118722

Expected Auction End Time: 7th September 2020 6:01pm

2x Sick Inductive Proximity Sensors.
Both are Type No. IM05-0B8NS-ZW1.
See the Sick Web link below for further item details:.
https://www.sick.com/ag/en/inductive-proximity-sensors/inductive-proximity-sensors/imm/im05-0b8ns-zw1/p/p232461

Both units are new in packaging. Packaging exterior shows some dust and grime from workshop storage

IFM Electronic Inductive Sensor IFM209
IFM Electronic Inductive Sensor IFM209

Skylarc Ref N118721

Expected Auction End Time: 6th September 2020 8:02pm

IFM Electronic Inductive Sensor
Part No. IFM209.
See the IFM Web link below for further item details:
https://www.ifm.com/us/en/product/IFM209

Item is as new unused in opened box.

Super-Ego 400-2 Bottom Screw Chain Vice
Super-Ego 400-2 Bottom Screw Chain Vice

Skylarc Ref M118720

Expected Auction End Time: 7th September 2020 6:45pm

Super-Ego 400-2 Bottom Screw Chain Vice.
Made in Spain.

Vintage Light box Unit
Vintage Light box Unit

Skylarc Ref L118719

Expected Auction End Time: 6th September 2020 6:25pm

Vintage Light box Unit.
Unknown manufacturer and model.
Unit measures approx 250x216x130mm.
Condition - Was used for many years in an engineering workshop so unit shows moderate wear and grime on surfaces. May benefit from a strong cleanup. Opaque white top shows scratching. Unit is operating.

3x Assorted Air Blow Guns & Wrench
3x Assorted Air Blow Guns & Wrench

Skylarc Ref K118718

Expected Auction End Time: 7th September 2020 7:40pm

3x Assorted Air Blow Guns & Wrench.
Includes:
- AmPro Air Blow Gun
- Vacula Air Blow gun
- Unknown type, brand and model of air powered ratchet or wrench, see photos for details on tool type.
All units show moderate wear and usage.

2x Heavy Duty 100mm Dia Trolley Castors
2x Heavy Duty 100mm Dia Trolley Castors

Skylarc Ref J118717

Expected Auction End Time: 6th September 2020 6:19pm

2x Heavy Duty 100mm Dia Trolley Castors.
Unknown manufacturer.
100mm diameter, 40mm wide red solid rubber wheels.
Mounting plates are 130x110mm.
Both are swivel type.
Condition - Both wheel surfaces show no wear from use so units likely unused but old stock that show moderate surface grime and dust from open long term Workshop Storage.

2x Large Taps & 1x Large Seating Milling Tool
2x Large Taps & 1x Large Seating Milling Tool

Skylarc Ref I118716

Expected Auction End Time: 7th September 2020 6:27pm

2x Large Taps & 1x Large Seating Milling Tool.
Includes:
- 2x Opti Metric M 100x2 HS D-1 Taps.
- 1x Seating tool, unable to find ID stamp.
Includes MDF storage box.
Condition - Unsure if taps are unused or not, see photos. Seating Tool apoears used.

3x Metal Benchtop Workshop Parts Drawer Units
3x Metal Benchtop Workshop Parts Drawer Units

Skylarc Ref H118715

Expected Auction End Time: 6th September 2020 10:00pm

3x Metal Benchtop Workshop Parts Drawer Units.
1x 8-drawer unit approx 240x155x85mm.
2x 6-drawer units each 240x155x140mm.
Each drawer is approx 155x115x45mm.
All units show moderate grime and wear from workshop use.

8x Assorted Milling Straight Tooth Cutters
8x Assorted Milling Straight Tooth Cutters

Skylarc Ref G118714

Expected Auction End Time: 7th September 2020 8:15pm

8x Assorted Milling Straight Tooth Cutters.
Assorted sizes, most unreadable from surface rust, see photos.
Condition varies with each unit. Most show wear and use with moderate surface rust.

5x Assorted Mill Parallels / Mounting Blocks
5x Assorted Mill Parallels / Mounting Blocks

Skylarc Ref V118599

Expected Auction End Time: 6th September 2020 6:43pm

5x Assorted Mill Parallels / Mounting Blocks.
Each is an individual unit, no matching pairs.
Includes the following sizes:
- 217x39x27mm unit stamped CMM.
- 143x23x22mm unit stamped D3.
- 201x15x5mm unit.
- 68x62x25mm unit with unreadable stamp, see photos.
- 102x70x18mm unit stamped SPEG K.
Condition varies greatly with each unit.

Pair of Hardened Mill Parallels
Pair of Hardened Mill Parallels

Skylarc Ref S118596

Expected Auction End Time: 7th September 2020 8:18pm

Pair of Hardened Mill Parallels.
Each us stamped with "Grinder 2".
Each is approx 200x32x5mm.
Each shows drill nicks, rust spotting etc.

Pair of Mill Parallels
Pair of Mill Parallels

Skylarc Ref U118598

Expected Auction End Time: 6th September 2020 6:14pm

Pair of Mill Parallels.
Each us stamped with "E2".
Each is approx 145x25x20mm.
Each shows drill nicks, rust spotting etc.

Pair of Hardened Mill Parallels
Pair of Hardened Mill Parallels

Skylarc Ref T118597

Expected Auction End Time: 7th September 2020 6:34pm

Pair of Hardened Mill Parallels.
Each us stamped with "Mill 4".
Each is approx 150x44x5mm.
Each shows drill nicks, rust spotting etc.

Pair of Mill Parallels
Pair of Mill Parallels

Skylarc Ref R118595

Expected Auction End Time: 6th September 2020 9:46pm

Pair of Mill Parallels.
Unknown if a matched pair.
No ID stamps on units.
Each is approx 125x60x75mm.

Pair of Mill Parallels
Pair of Mill Parallels

Skylarc Ref Q118594

Expected Auction End Time: 7th September 2020 9:12pm

Pair of Mill Parallels.
Unknown if a matched pair.
No ID stamps on units.
Each is approx 125x60x75mm.

Multipurpose Industrial Precision Benchtop Stand
Multipurpose Industrial Precision Benchtop Stand

Skylarc Ref P118593

Expected Auction End Time: 6th September 2020 9:31pm

Multipurpose Industrial Precision Benchtop Stand.
Unknown manufacturer.
Stamped with EPB100 on bottom of base.
Solid steel base 190x102x400mm.
Stand height 400mm.
Adjustanle component support bracket with a 65mm inner diameter support ring attached.
Unknown what unut was previously used for.
See photos for further design details.
Some rust spotting on steel surfaces.

Assorted Mill Lockdown Plates & More
Assorted Mill Lockdown Plates & More

Skylarc Ref O118592

Expected Auction End Time: 7th September 2020 8:30pm

Assorted Mill Lockdown Plates & More.
Largest units are approx 405x100x25mm.
See photos for further details on the variety of items included.
Condition varies with each unit.

Assorted 1/2" Sockets w/ Hex Heads w/ 3x Wooden Bases
Assorted 1/2" Sockets w/ Hex Heads w/ 3x Wooden Bases

Skylarc Ref N118591

Expected Auction End Time: 6th September 2020 8:17pm

Assorted 1/2" Sockets w/ Hex Heads in Assorted sizes.
Includes 3x wooden holders.
See photos for further details on items Included.

Milling Lockdown Bolts w/ Holders
Milling Lockdown Bolts w/ Holders

Skylarc Ref M118590

Expected Auction End Time: 7th September 2020 6:19pm

Milling Lockdown Bolts w/ Holders.
4x holders, two metal holding small Hex bolts, and two wooden holders holding large bolts of various lengths.
Condition varies with each unit. See photos for further details on what is included.

Assorted Mixed Lot of Workshop Lifting Loops, Anchors, Parts & Accessories
Assorted Mixed Lot of Workshop Lifting Loops, Anchors, Parts & Accessories

Skylarc Ref L118589

Expected Auction End Time: 6th September 2020 6:47pm

Assorted Mixed Lot of Workshop Lifting Loops, Anchors, Parts & Accessories.
A mix of various parts and components. 4x Heavy machine lifting units each approx 120x80,90mm.
Bags of various unused Anchors, Washers, etc.
See photos for further details on the wide variety of parts and components included.
Condition varies with each unit.

Assorted Lot Hex Bolts, Custom Bolts, & More
Assorted Lot Hex Bolts, Custom Bolts, & More

Skylarc Ref K118588

Expected Auction End Time: 7th September 2020 6:13pm

Assorted Lot Hex Bolts, Custom Bolts, & More.
Assorted sizes.
Some bolts have had nuts Welded to top to of them, see photos.
Includes other assorted Fastening Hardware, etc, see photos for further details.
All units show varying levels of use.

57x Mill Lockdown Bolts, Assorted Lengths & Sizes
57x Mill Lockdown Bolts, Assorted Lengths & Sizes

Skylarc Ref J118587

Expected Auction End Time: 6th September 2020 7:32pm

57x Mill Lockdown Bolts, Assorted Lengths & Sizes.
Lengths vary from approx 45mm up to 310mm.
See photos for details on the special purpose bolt head design on each.

Assorted Mixed Mill Lockdown Components, Parts, & More
Assorted Mixed Mill Lockdown Components, Parts, & More

Skylarc Ref I118586

Expected Auction End Time: 7th September 2020 9:24pm

Assorted Mixed Mill Lockdown Components, Parts, & More.
A mixed lot of various loose Mill Lockdown Components, t-slot units, bolts, thick Washers and more. See photos for further details
Condition varies with each unit.

4x Standard Workshop Hand Shovels + 4x Custom Steel Rakes
4x Standard Workshop Hand Shovels + 4x Custom Steel Rakes

Skylarc Ref H118585

Expected Auction End Time: 6th September 2020 8:04pm

4x Standard Workshop Hand Shovels + 4x Custom Steel Rakes.
Four hand shoves approx 135mm wide, 400mn long.
Four custom made heavy Steel Workshop Material rakes, 540mm to 600mm long handles.
All units show moderate Workshop wear and usage.

Assorted Lot Hand Tools Spanners, Sockets, Magnetic Probes, Stamps
Assorted Lot Hand Tools Spanners, Sockets, Magnetic Probes, Stamps

Skylarc Ref G118584

Expected Auction End Time: 7th September 2020 6:44pm

Assorted Lot Hand Tools Spanners, Sockets, Magnetic Probes, Stamps.
Includes:
- 50x Assorted Spanners, both metric and Imperial Sizes.
- Partial 1/2" sockets set, no Wrench included.
- 3x Flexable magnetic probes.
- 10-piece metal stamp set.
Condition varies with each unit, some show rusting, see photos.

2x Workshop Face Sheilds + 1x Welding Mask
2x Workshop Face Sheilds + 1x Welding Mask

Skylarc Ref F118583

Expected Auction End Time: 6th September 2020 9:06pm

2x Workshop Face Sheilds + 1x Welding Mask.
Includes:
- 2x ProSafe Armadillo face sheilds.
- 1x unmarked welding mask.
Condition varies, ProSafe items are newer and show lesser usage than the older more worn welding mask.

5x Assorted Engineering Precision Straight Edges & Rullers
5x Assorted Engineering Precision Straight Edges & Rullers

Skylarc Ref E118582

Expected Auction End Time: 7th September 2020 8:27pm

5x Assorted Engineering Precision Straight Edges & Rullers.
Includes the following:
- 2000mm long 80mm wide, 12mm thick steel straight edge unit, no visible branding marks.
- 1500x60x12mm Preisser Shahllineal 1500-1 DIN 874 straight edge.
- Toledo branded metal Metric and Imperial ruler, 1000mm length.
- unbranded metal imperial scale ruler, 48" long.
- Stanley branded 90 Degree straight edge unit, both metric and Imperial scales.
Condition varies with each unit.

Industrial Lifting Grip Unit
Industrial Lifting Grip Unit

Skylarc Ref D118581

Expected Auction End Time: 6th September 2020 7:04pm

Industrial Lifting Grip Unit.
No ID label so unknown manufacturer and lifting capacity.
Inner gap approx 60mm wide.
Top eye loop Inner diameter approx 60mm.

Heavy Duty Steel Plate T-Slotted Workshop Table
Heavy Duty Steel Plate T-Slotted Workshop Table

Skylarc Ref C118580

Expected Auction End Time: 7th September 2020 7:07pm

Heavy Duty Steel Plate T-Slotted Workshop Table.
Solid 95mm thick steel plate with 10x t-slot grooves cut into it.
Includes a box of compatible t-slot components with Hex bolts.
Note - This unit does NOT include any support frame, auction is for the top plate only.
Note - Very heavy unit, estimate around 2700kg.

15x Assorted Types & Lengths of Steel Chain
15x Assorted Types & Lengths of Steel Chain

Skylarc Ref B118579

Expected Auction End Time: 6th September 2020 7:58pm

15x Assorted Types & Lengths of Steel Chain.
A wide assortment of chain diameters and lengths.
Lengths vary from approx 250mm up to approx 8450mm.

630mm Lifting Chain w/ Lifting Ring
630mm Lifting Chain w/ Lifting Ring

Skylarc Ref A118578

Expected Auction End Time: 7th September 2020 8:14pm

630mm Lifting Chain w/ Lifting Ring.
Chain length approx 630mm long.
Lifting capacity 2000kg.
Certification is expired.
Includes a spare uncertified lifting ring approx 165x105x15mm.
Condition varies with each unit.

2500mm Lifting Chain
2500mm Lifting Chain

Skylarc Ref Z118577

Expected Auction End Time: 6th September 2020 7:24pm

2500mm long Lifting Chain.
2400kg max lifting capacity.
Certification is expired.

2x Lengths of Lifting Chains
2x Lengths of Lifting Chains

Skylarc Ref Y118576

Expected Auction End Time: 7th September 2020 7:08pm

2x Lengths of Lifting Chains.
One unit has approx 2000mm long chain, a 1280kg limit and expired certification.
Second unit has approx 830mm long chain, 1280kg capacity, and expired certification.
Condition varies with each unit, see photos.

2x Lengths of Lifting Chains
2x Lengths of Lifting Chains

Skylarc Ref X118575

Expected Auction End Time: 6th September 2020 9:07pm

2x Lengths of Lifting Chains.
One unit has approx 2000mm long chain, a 1280kg limit and expired certification.
Second unit has approx 3000mm long chain, 1280kg capacity, and certification good till 03/2021.
Condition varies with each unit, see photos.

2x Lengths of Lifting Chains
2x Lengths of Lifting Chains

Skylarc Ref W118574

Expected Auction End Time: 7th September 2020 6:50pm

2x Lengths of Lifting Chains.
Both units have approx 2000mm long chain.
Both units have 1280kg limit and expired certification.
Condition varies with each unit, see photos.

2x Lengths of Lifting Chains
2x Lengths of Lifting Chains

Skylarc Ref V118573

Expected Auction End Time: 6th September 2020 9:17pm

2x Lengths of Lifting Chains.
Both units have approx 2000mm long chain.
One unit has 1600kg limit and certification good till 03/2021.
Second unit has no certification tag so capacity is unknown.
Condition varies with each unit, see photos.

2x Lengths of Lifting Chains
2x Lengths of Lifting Chains

Skylarc Ref U118572

Expected Auction End Time: 7th September 2020 7:08pm

2x Lengths of Lifting Chains.
Both units have approx 3000mm long chain.
One unit has 1600kg limit.
Second unit has 2000kg limit.
Both units certification good till 03/2021.
Condition varies with each unit, see photos.

Steel Workshop or Office Storage Cabinet by Europlan
Steel Workshop or Office Storage Cabinet by Europlan

Skylarc Ref T118571

Expected Auction End Time: 6th September 2020 7:12pm

Steel Workshop or Office Storage Cabinet by European.
3x inner adjustable shelves.
Lockable, key is included.
Condition - Some sticker residue, finish scratches, denting, rust spotting etc. One shelf is missing support brackets.

4-Leg Lifting Chain
4-Leg Lifting Chain

Skylarc Ref S118570

Expected Auction End Time: 7th September 2020 7:43pm

4-Leg Lifting Chain.
2x 350mm long chains and 2x 250mm long chains.
Single leg capacity 1600kg
Multi leg capacity up to 2720kg.
Certification good till 03/2021.

2-Leg Lifting Chain
2-Leg Lifting Chain

Skylarc Ref R118569

Expected Auction End Time: 6th September 2020 8:15pm

2-Leg Lifting Chain.
500mm long chains.
Single leg capacity 1500kg
Multi leg capacity 2550kg.
Needs recertification.

5x Assorted Workshop Power Extension Cords Leads & 2x Power Boards
5x Assorted Workshop Power Extension Cords Leads & 2x Power Boards

Skylarc Ref Q118568

Expected Auction End Time: 7th September 2020 7:13pm

5x Assorted Workshop Power Extension Cords Leads & 2x Power Boards.
Two Plug Boss 6-outlet power boards.
5x power extension cable leads in assorted lengths up to 10 metres.
All units are 10A rated.
Invludes 6x sections of cable lead floor protection strips.
Condition varies with each unit.

4x 15A Single Phase Workshop Extension Power Leads Cords
4x 15A Single Phase Workshop Extension Power Leads Cords

Skylarc Ref P118567

Expected Auction End Time: 6th September 2020 6:36pm

4x 15A Single Phase Workshop Extension Power Leads Cords.
ACPA branded.
All are 15A Single Phase.
Includes 3x 10 metre and 1x 20 metre lengths.
Condition - One unit is as new in packaging, other three show light usage.

WIA Weldmatic MIG Welder and Wire Feed
WIA Weldmatic MIG Welder and Wire Feed

Skylarc Ref O118566

Expected Auction End Time: 7th September 2020 8:21pm

WIA Weldmatic Fabricator & Wire Feeder Industrial Welding Set.
Manufactured in Australia by WIA Welding Industries Australia.
Three Phase
Weldmatic Fabricator Type No. CP33-02 B.
Wire Feeder type W17.
Powerd by 32A 3-phase plug.

Kemppi FastMig KM400 MIG Welder
Kemppi FastMig KM400 MIG Welder

Skylarc Ref N118565

Expected Auction End Time: 6th September 2020 8:05pm

Kemppi FastMig KM400 MIG Welder
400amp max welding output
Kempi MF33 Wire Feed
Powered by 32A 3-phase plug.
Ambicore Binzel 3 Welding Torch MB 36KD.

Gantry I-beam Trolley w/ Manual Chain Drive
Gantry I-beam Trolley w/ Manual Chain Drive

Skylarc Ref M118564

Expected Auction End Time: 7th September 2020 8:10pm

Gantry I-beam Trolley w/ Manual Chain Drive.
No ID label on unit so manufacturer and max weight capacity is unknown.
85mm non-adjustable inner width.

Vetter Trittler 250kg Powered Chain Hoist
Vetter Trittler 250kg Powered Chain Hoist

Skylarc Ref L118563

Expected Auction End Time: 6th September 2020 8:20pm

Vetter Trittler 250kg Powered Chain Hoist.
Made in Australia.
Dated 1984.
Type No. SI6-4
250kg weight capacity.
Chain length unknown.
Single phase.
Main housing is approx 420x245x140mm.

Redman UniTool Metal Press Punch
Redman UniTool Metal Press Punch

Skylarc Ref K118562

Expected Auction End Time: 7th September 2020 8:12pm

Redman UniTool Metal Press Punch.
Model No. 12" 300+ 350+

Redman UniPierce Metal Press Punch
Redman UniPierce Metal Press Punch

Skylarc Ref J118561

Expected Auction End Time: 6th September 2020 7:55pm

Redman UniPierce Metal Press Punch.
Model No. 600 650

Redman UniPierce Metal Press Punch
Redman UniPierce Metal Press Punch

Skylarc Ref I118560

Expected Auction End Time: 7th September 2020 7:45pm

Redman UniPierce Metal Press Punch.
Model No. 450-12".

100x100mm Lathe Tool Post
100x100mm Lathe Tool Post

Skylarc Ref H118559

Expected Auction End Time: 6th September 2020 9:08pm

100x100mm Lathe Tool Post.
Unknown manufacturer.

110x110mm Lathe Tool Post
110x110mm Lathe Tool Post

Skylarc Ref G118558

Expected Auction End Time: 7th September 2020 6:41pm

110x110mm Lathe Tool Post.
Unknown manufacturer.

138x138mm Lathe Tool Post
138x138mm Lathe Tool Post

Skylarc Ref F118557

Expected Auction End Time: 6th September 2020 7:56pm

138x138mm Lathe Tool Post.
Unknown manufacturer.

130x130mm Lathe Tool Post
130x130mm Lathe Tool Post

Skylarc Ref E118556

Expected Auction End Time: 7th September 2020 6:30pm

130x130mm Lathe Tool Post.
Unknown manufacturer.

160x160mm Lathe Tool Post
160x160mm Lathe Tool Post

Skylarc Ref D118555

Expected Auction End Time: 6th September 2020 7:45pm

160x160mm Lathe Tool Post.
Unknown manufacturer.

Mill Lockdown Kit
Mill Lockdown Kit

Skylarc Ref C118554

Expected Auction End Time: 7th September 2020 8:09pm

Mill Lockdown Kit.
Incomplete kit, some components are missing, see photjs.

Fagor S500R Encoder
Fagor S500R Encoder

Skylarc Ref P118749

Expected Auction End Time: 6th September 2020 9:39pm

Fagor S500R Encoder.
Version 09B.
Pulses per revolution - 500.
Supply voltage +5V DC.
Unit exterior shows generally mild use marks. Operating condition is unknown.

455mm Diameter Lathe Face Plate
455mm Diameter Lathe Face Plate

Skylarc Ref F118739

Expected Auction End Time: 7th September 2020 6:42pm

455mm Diameter Lathe Face Plate.
Unknown manufacturer and model.

8x Assorted Industrial Machine Drive Belts
8x Assorted Industrial Machine Drive Belts

Skylarc Ref O118748

Expected Auction End Time: 6th September 2020 7:13pm

8x Assorted Industrial Machine Drive Belts.
Includes the following:
- 3x Strongbelt 850 5M, 50mm width.
- 2x Poggi HTD Non Piegare 1040 8M, 30mm width.
- 1x Poggi HTD Non Piegare 640 8M, 20mm width.
- 1x Bando ST'S S8M 600, 25mm width.
- 1x unmarked belt 16mm wide.
All unita appear as new unused without packaging.

25mm & 30mm Mores Tapper Drill Bits
25mm & 30mm Mores Tapper Drill Bits

Skylarc Ref N118747

Expected Auction End Time: 7th September 2020 6:06pm

25mm & 30mm Mores Tapper Drill Bits.
Unknown manufacturers.
30mm drill bit has a Mores Tapper extension attached.
Both units show usage marks, etc.

3x Assorted Sizes of Lathe Chuck Keys
3x Assorted Sizes of Lathe Chuck Keys

Skylarc Ref M118746

Expected Auction End Time: 6th September 2020 6:17pm

3x Assorted Sizes of Lathe Chuck Keys.
Unknown manufacturers.
Each is a different size. Square insert ends are the following sizes:
- 10x10mm
- 12x12mm
- 14x14mm.

Lathe Live Centre Unit
Lathe Live Centre Unit

Skylarc Ref L118745

Expected Auction End Time: 7th September 2020 6:16pm

Lathe Live Centre Unit.
Unknown manufacturer and model.
Slightly Tapered mounting shaft is approx 90mm in length.
Max unit diameter is approx 152mm.
Rotating centre Cone is approx 27mm diameter.

455mm Diameter Lathe Face Plate
455mm Diameter Lathe Face Plate

Skylarc Ref E118738

Expected Auction End Time: 6th September 2020 7:49pm

455mm Diameter Lathe Face Plate.
Unknown manufacturer and model.

3x Indexable Lathe Turning Tools w/ Spare Indexes
3x Indexable Lathe Turning Tools w/ Spare Indexes

Skylarc Ref I118742

Expected Auction End Time: 7th September 2020 8:46pm

3x Indexable Lathe Turning Tools w/ Spare Indexes.
Al three tools have no visible id markings so unknown manufacturer and models.
Each tool is 16x16mm in width and approx 100mm in length.
Includes a total of 9x compatible index units from Kennametal and Seco brands.
Condition - Tools show wear and usage. Indexes are leftover unused stock.

16mm Keyed Drill Church w/ Morse Tapper Mount
16mm Keyed Drill Church w/ Morse Tapper Mount

Skylarc Ref K118744

Expected Auction End Time: 6th September 2020 7:51pm

16mm Keyed Drill Church w/ Morse Tapper Mount.
Unknown manufacturer.
Chuck key is missing.

20mm Keyed Drill Church w/ Morse Tapper Mount
20mm Keyed Drill Church w/ Morse Tapper Mount

Skylarc Ref J118743

Expected Auction End Time: 7th September 2020 8:04pm

20mm Keyed Drill Church w/ Morse Tapper Mount.
Unknown brand.
Chuck key is missing.
Jaws move smoothly.

Indexable Lathe Boring Bar w/ Spare Indexes
Indexable Lathe Boring Bar w/ Spare Indexes

Skylarc Ref H118741

Expected Auction End Time: 6th September 2020 8:41pm

Indexable Lathe Boring Bar w/ Spare Indexes.
Unable to find an ID mark on boring bar so manufacturer and model are unknown. The bar measures 22x16mm width and 125mm total length. Cylindrical section is 12mm diameter and 42mm in length.
Includes a total of 24x compatible index units made by Kennametal.
Condition - Boring Bar shows use and wear, index mounting screw is missing. Indexes are unused stock.

Seco Indexable Lathe Boring Bar w/ Spare Indexes
Seco Indexable Lathe Boring Bar w/ Spare Indexes

Skylarc Ref G118740

Expected Auction End Time: 7th September 2020 8:46pm

Seco Indexable Lathe Boring Bar w/ Spare Indexes.
Seco beaded boring Bar type number A16R-STFCR11.
Includes 10x Kennametal branded compatible index units.
Condition Boring Bar shows some usage. Spare Indexes are as new unused.

7x Assorted Lathe Tool Holders, Boring Bars, Knurling Bar
7x Assorted Lathe Tool Holders, Boring Bars, Knurling Bar

Skylarc Ref D118737

Expected Auction End Time: 6th September 2020 8:13pm

7x Assorted Lathe Tool Holders, Boring Bars, Knurling Bar.
Includes:
- Iscar Cut-Grip CGHN-32-3DG.
- Iscar SGTBU 16-5G Holder with a Iscar Cut-Grip GGHN 26-3D unit installed in it.
- Unknown brand Boring Bar S16R-CTFPR-11.
- Small Solar branded Holder with no visible type stamp, measures approx 115x14x14mm.
- unmarked Knurling Bar approx 137x45x17mm.
- small unmarked turning Tool approx 100mm in length and 16x16mm width.
- small unmarked turning Tool approx 100mm in length and 16x22mm width.
See photos for further type details.
Condition varies with each unit.

20 Metre 3-Phase 20Amp (500V, 50Hz) Extension Lead
20 Metre 3-Phase 20Amp (500V, 50Hz) Extension Lead

Skylarc Ref R118725

Expected Auction End Time: 7th September 2020 6:49pm

20 Metre 3-Phase 20Amp (500V, 50Hz) Extension Lead.

16 Metre 3-Phase 32Amp (500V, 50Hz) Extension Lead
16 Metre 3-Phase 32Amp (500V, 50Hz) Extension Lead

Skylarc Ref S118726

Expected Auction End Time: 6th September 2020 9:27pm

16 Metre 3-Phase 32Amp (500V, 50Hz) Extension Lead

Assorted Workshop Tools, Supplies, Nuts, Bolts, Accessories
Assorted Workshop Tools, Supplies, Nuts, Bolts, Accessories

Skylarc Ref C118736

Expected Auction End Time: 7th September 2020 7:05pm

Assorted Workshop Tools, Supplies, Nuts, Bolts, Accessories.
Includes assorted nuts and bolts, some being stainless steel varieties. Also some Wrenches, Hex Keys, bearings, metal tool case with assorted odds and ends. A box of various engineering edge finder components and parts, all non operating. A wide variety of mixed items in auction.
Condition varies widely with each unit.

12 Metre 3-Phase 32Amp (500V, 50Hz) Extension Lead
12 Metre 3-Phase 32Amp (500V, 50Hz) Extension Lead

Skylarc Ref T118727

Expected Auction End Time: 6th September 2020 8:34pm

12 Metre 3-Phase 32Amp (500V, 50Hz) Extension Lead

Mobile Wilden Polypropylene Discharge Elbow Manifold
Mobile Wilden Polypropylene Discharge Elbow Manifold

Skylarc Ref U118728

Expected Auction End Time: 7th September 2020 6:36pm

Mobile Wilden Polypropylene Discharge Pump
Wilsen 01-5230-20 Elbow Manifold.
Mounted to a sack barrow.
With hose attached.

Cammac Arbour Press on Stand
Cammac Arbour Press on Stand

Skylarc Ref V118729

Expected Auction End Time: 6th September 2020 8:16pm

Cammac 400KG Arbour Press on Stand.
Note this unit is missing handle and does not come with a press bench.

Assorted Used Lathe Chuck Jaws
Assorted Used Lathe Chuck Jaws

Skylarc Ref B118735

Expected Auction End Time: 7th September 2020 6:25pm

Assorted Used Lathe Chuck Jaws.
Includes:
- 2x unmarked Jaws each approx 70x20x55mm.
- 3x units all stamped with 93212 and are each approx 87x25x64mm.
- 3x unmarked units each approx 125x41x51mm.
All units show varying levels of wear and usage.

3 Jaw Universal Chuck
3 Jaw Universal Chuck

Skylarc Ref W118730

Expected Auction End Time: 6th September 2020 9:02pm

3 Jaw Universal Chuck.
Overall Diameter:380mm.
PCD: 240mm.
Internal Diameter:135mm.

Vertex Replacement Lathe Chuck Jaws Type VSJ-12
Vertex Replacement Lathe Chuck Jaws Type VSJ-12

Skylarc Ref A118734

Expected Auction End Time: 7th September 2020 8:42pm

Vertex Replacement Lathe Chuck Jaws Type VSJ-12.
Set of 3x Jaws in box.
New unused items. Some box wear from workshop storage.

4 Jaw Independent Chuck
4 Jaw Independent Chuck

Skylarc Ref X118731

Expected Auction End Time: 6th September 2020 6:22pm

4 Jaw Independent Chuck.
Overall Diameter:410mm.
PCD: 235mm.
Diameter: 300mm.

Widia Indexable Lathe Boring Bar A40T-MTFNL16
Widia Indexable Lathe Boring Bar A40T-MTFNL16

Skylarc Ref Z118733

Expected Auction End Time: 7th September 2020 7:44pm

Widia Indexable Lathe Boring Bar A40T-MTFNL16

Seco Indexable Lathe Boring Bar A12N-SCLCL09
Seco Indexable Lathe Boring Bar A12N-SCLCL09

Skylarc Ref F118713

Expected Auction End Time: 6th September 2020 7:27pm

Seco Indexable Lathe Boring Bar A12N-SCLCL09.

Strong SC 3 Jaw Recess Mounting Lathe Chuck
Strong SC 3 Jaw Recess Mounting Lathe Chuck

Skylarc Ref Y118732

Expected Auction End Time: 7th September 2020 7:22pm

Strong SC 3 Jaw Recess Mounting Lathe Chuck.
Series SC-9M 93212.
Overall Diameter:230mm.
PCD: 180mm.
Condition - Note part of the mounting bracket has snapped off.

2x Indexable Lathe Boring Bars Type A32T-STFCL16
2x Indexable Lathe Boring Bars Type A32T-STFCL16

Skylarc Ref D118711

Expected Auction End Time: 6th September 2020 7:36pm

2x Indexable Lathe Boring Bars.
Both units are Type A32T-STFCL16.
One unit is Sandvik Coromant CoroTurn 107 branded.
Second unit is Walter branded.
Condition - Sandvik bar has broken insert support section at top, see photos. Both units show wear and usage.

Seco Indexable Lathe Boring Bar A25S-PTFNL16
Seco Indexable Lathe Boring Bar A25S-PTFNL16

Skylarc Ref E118712

Expected Auction End Time: 7th September 2020 9:58pm

Seco Indexable Lathe Boring Bar A25S-PTFNL16

Fronius TransPuls Synergic 2700 Welder with Trolley
Fronius TransPuls Synergic 2700 Welder with Trolley

Skylarc Ref Q117892

Expected Auction End Time: 6th September 2020 9:09pm

Model: Fronius TransPuls Synergic 2700 4R/E
MIG Model with push pull gun
270 amp max welding output
Three phase
Multi-process MIG/MAG, TIG DC & rod electrode (MMA) welding
With Trolley

Self Standing Workshop Wall Unit
Self Standing Workshop Wall Unit

Skylarc Ref K117886

Expected Auction End Time: 7th September 2020 6:03pm

Self Standing Workshop Wall Unit.
Frame is made from 50x50mm hollow box Steel lengths.
Wall surfaces is 9mm thick MDF boards.
2x small whiteboards attached.
See our other listings for more of these units.

Workshop Work Table w/ Sheet Steel Top
Workshop Work Table w/ Sheet Steel Top

Skylarc Ref J117885

Expected Auction End Time: 6th September 2020 9:28pm

Workshop Work Table w/ Sheet Steel Top.
5mm thick sheet steel top surface.
Approx 450mm long mounting accessory Welded to one side, see photos for details on type of mounting accessory.
Condition - lower small shelf needs reattaching and repair. Table shows typical workshop wear and usage.

Large Workshop Table
Large Workshop Table

Skylarc Ref P117891

Expected Auction End Time: 7th September 2020 8:17pm

Large Workshop Table.
Hollow Steel Frame Construction (4 Legs).
Timber Top.

Large Workbench Table
Large Workbench Table

Skylarc Ref O117890

Expected Auction End Time: 6th September 2020 8:36pm

Large Workbench Table.
Steel frame with timber top and sides.
Incldes a steel bracket for roller feed (cardboard/plastic roll for packaging.

Industrial Workbench/Shelf
Industrial Workbench/Shelf

Skylarc Ref I117884

Expected Auction End Time: 7th September 2020 8:15pm

Industrial Workbench/Shelf.
4 leg steel frame.
MDF board top and bottom shelf.
Two steel backboard posts.
Table top dimensions: 2440mm x 480mm x 950mm.

Master B150 CED Direct Oil Fired Portable Heater
Master B150 CED Direct Oil Fired Portable Heater

Skylarc Ref E117880

Expected Auction End Time: 6th September 2020 9:49pm

Master B150 CED Direct Oil Fired Portable Heater
Power: 44kw, 150.000 Btu/h, 38.000 Kcal/h.
Air displacement: 900m³/h.
Power: 220-240V 50Hz.
Fuel Consumption: 3,72kg/h.
Tank sise: 42L.
Please note this unit has not been tested or powered on.

Workshop Scrap Material Trolley Bin
Workshop Scrap Material Trolley Bin

Skylarc Ref G117882

Expected Auction End Time: 7th September 2020 8:06pm

Workshop Tipping Scrap Material Trolley Bin.
Castors attached to base.
Non Tipping design, contents are dumped by attaching Lifting hooks to rear base eye loop or push handle top hook, see photos.
Bin dimensions approx 700mm long, 605mm wide, 500mm high.
Total unit dimensions approx 870mm long, 615mm wide, 990mm high at handle.
Condition - Unit shows typical engineering Workshop wear and usage. The two swivel type rear Castors are not swiveling and may need maintenance or replacement.

Workshop Tipping Scrap Material Trolley Bin
Workshop Tipping Scrap Material Trolley Bin

Skylarc Ref F117881

Expected Auction End Time: 6th September 2020 7:38pm

Workshop Tipping Scrap Material Trolley Bin.
Mounted on Castors.
Steel bin dimensions approx 750mm long, 500mm wide, 490mm high.
Hinged for Tipping out contents.
Overall dimensions are approx 1035mm long, 520mm wide, 850mm high at handle.
Shows typical engineering Workshop wear and usage.

Mobile Workshop Sheet Material Transport Trolley
Mobile Workshop Sheet Material Transport Trolley

Skylarc Ref P117865

Expected Auction End Time: 7th September 2020 7:35pm

Mobile Workshop Sheet Material Transport Trolley.
120mm diameter Castors.
Note - white plastic sheet seen in photos is for demonstrative purposes only and is NOT included with Trolley.

Custom-Made Workshop Material Workstand
Custom-Made Workshop Material Workstand

Skylarc Ref D117879

Expected Auction End Time: 6th September 2020 8:13pm

Custom-Made Workshop Material Workstand.
Home-made workshop material support stand built with hollow steal frame built into a tyre.

Kennametal Lathe Indexable Boring Bar A25R-STFCL16
Kennametal Lathe Indexable Boring Bar A25R-STFCL16

Skylarc Ref C118710

Expected Auction End Time: 7th September 2020 9:55pm

Kennametal Lathe Indexable Boring Bar A25R-STFCL16.

Long Workshop Work Table Workbench
Long Workshop Work Table Workbench

Skylarc Ref O117864

Expected Auction End Time: 6th September 2020 8:17pm

Long Workshop Work Table Workbench.
17mm thick plywood top surface.
Lower shelf.
Heavy duty steel support frame.

Industrial Workshop Bandsaw
Industrial Workshop Bandsaw

Skylarc Ref N117863

Expected Auction End Time: 7th September 2020 9:29pm

Industrial Workshop Bandsaw.
Unknown manufacturer.
Model No. MJ346.
30mm thick tiltable Table approx 590x490mm and 945mm above floor.
Table pivot capacity from 0 to 45 degrees.
Blade size 4080mm.
3-Phase powered.
Includes spare unused Starret branded blade type W-PB42 4080 x 27 x 8-12TPI.
Condition - Saw operates normally. Shows Workshop wear and use. Heavy tape residue from tape holding doors closed, see photos.

Pair of Workshop Saw Horses
Pair of Workshop Saw Horses

Skylarc Ref B117877

Expected Auction End Time: 6th September 2020 8:06pm

Pair of Workshop Saw Horses.
Two hollow steel frame workshop saw horses.
See last photo dor full dimensions.

Pair of Workshop Saw Horses
Pair of Workshop Saw Horses

Skylarc Ref A117876

Expected Auction End Time: 7th September 2020 8:24pm

Pair of Workshop Saw Horses.
Pair of Industrial hollow steel frame workshop saw horses.
40mm top surface area.

Assorted Lengths of Aluminium Material
Assorted Lengths of Aluminium Material

Skylarc Ref D117853

Expected Auction End Time: 6th September 2020 9:39pm

Assorted Lengths of Aluminium Material.
Cylindrical, hollow box, L-Shaped, T-Shaped type lengths.
Lengths vary up to 5000mm.
Some appear to be off cuts.
Leftover unused workshop supply stock. Some dust from storage.

Workshop Work Bench Table, 7210mm Length
Workshop Work Bench Table, 7210mm Length

Skylarc Ref E117854

Expected Auction End Time: 7th September 2020 9:47pm

Workshop Work Bench Table, 7210mm Length.
600mm width, 910mm hight.
Lower 2400mm long shelf.
17mm thick plywood top surface.
Note - Auction is for long Workbench only, items seen on and around unit are not included.

Steel Surfaced Heavy Duty Workshop Work Table
Steel Surfaced Heavy Duty Workshop Work Table

Skylarc Ref F117855

Expected Auction End Time: 6th September 2020 6:31pm

Steel Surfaced Heavy Duty Workshop Work Table.
1235x1200mm top surface of 6mm thick sheet steel.
Approx 875mm hight.
Heavy steel frame.

Pair of Workshop Horses/Stands
Pair of Workshop Horses/Stands

Skylarc Ref Z117875

Expected Auction End Time: 7th September 2020 6:45pm

Pair of Workshop Horses/Stands.
Home made workshop stands.
Steel 40mm pipe frame construction.
Condition - moderate - heavy wear and tear (see photos).
See dimensions below (for each unit).

Pair of Steel Workshop Work Saw Horses
Pair of Steel Workshop Work Saw Horses

Skylarc Ref G117856

Expected Auction End Time: 6th September 2020 6:13pm

Pair of Steel Workshop Work Saw Horses.
Steel tube frame with T-Shaped top beam.
Top beam approx 1930mm in length.
Height approx 635mm.
Condition - Units show moderate wear and residue from being used as welding supports, see photos.

Tooline BS305 305mm Bandsaw
Tooline BS305 305mm Bandsaw

Skylarc Ref Y117874

Expected Auction End Time: 7th September 2020 7:38pm

Tooline BS305 305mm Bandsaw.
Max Workpiece Height: 162 mm
Motor: 750 watt 230V-50hz
Blade Speed: 370, 800 m/min
Throat: 305 mm
Blade Length: 2240mm
Table Size: 480 x 400mm.

Pair of Heavy Duty Workshop Wall Mounted Material Support Racks
Pair of Heavy Duty Workshop Wall Mounted Material Support Racks

Skylarc Ref H117857

Expected Auction End Time: 6th September 2020 9:04pm

Pair of Heavy Duty Workshop Wall Mounted Material Support Racks.
Pair of Heavy steel box type wall mounted bars approx 50x50x2540mm.
Each has 12x slightly angled steel bars for supporting materials etc, each bar is approx 300x40mm.
Appears to be custom built so max weight capacity is unknown.

Master XL6 Infrared Portable Diesel Heater
Master XL6 Infrared Portable Diesel Heater

Skylarc Ref X117873

Expected Auction End Time: 7th September 2020 6:33pm

Master XL6 Infrared Portable Diesel Heater.
Infrared oil heaters deliver heat fast and exactly to the place where it is required without any air movement. They are suitable for dust-free drying walls or paints, defrosting machinery or pipe lines, heating the working areas.
Suitable for: * Garages * Workshops, * Construction sites *  Sheds  *  Warehouses *.
Specifications: 
Power:  17kW.
Output: 58.000 BTU/hour.
Output: 14,600 Kcal/hour.
Fuel Autonomy: 7 hours.
Fuel Consumption: 1.35 kg per hour.
Power supply: 220-240/50 V/Hz.
Rated Current: ,85 Amps.
Tank Capacity: 11 litres.

Pair of Heavy Duty Workshop Wall Mounted Material Support Racks
Pair of Heavy Duty Workshop Wall Mounted Material Support Racks

Skylarc Ref I117858

Expected Auction End Time: 6th September 2020 7:54pm

Pair of Heavy Duty Workshop Wall Mounted Material Support Racks.
Pair of Heavy steel box type wall mounted bars approx 50x50x2540mm.
Each has 12x slightly angled steel bars for supporting materials etc, each bar is approx 300x40mm.
Appears to be custom built so max weight capacity is unknown.

Industrial Workbench/Table
Industrial Workbench/Table

Skylarc Ref V117871

Expected Auction End Time: 7th September 2020 9:53pm

Industrial Workbench/Table.
Steel frame with wooden shelve, top and backboard.
Back board has a small storage shelve and 2 pinboards attached.
Workspace top dimensions: L2390mm x W1200mm x H920mm.
Condition - Moderate markings and stains.

Pair of Steel Workshop Personnel Lockers
Pair of Steel Workshop Personnel Lockers

Skylarc Ref J117859

Expected Auction End Time: 6th September 2020 7:09pm

Pair of Steel Workshop Personnel Lockers.
Unknown brand.
Have been repainted black.
MDF shelves have been added inside each section.
Both doors have locks but no keys included.
Condition - Attached units show moderate wear and usage. Some denting, rust spotting etc. Latch in one door needs repair.

Steel Workshop Work Table
Steel Workshop Work Table

Skylarc Ref K117860

Expected Auction End Time: 7th September 2020 7:32pm

Steel Workshop Work Table.
Steel frame with 6mm thick steel top surface.
Table measures approx 1235x805x930mm.
Some welding residue, rust spotting on unit.

Industrial Steel Workbench with Vice & Pinboard
Industrial Steel Workbench with Vice & Pinboard

Skylarc Ref U117870

Expected Auction End Time: 6th September 2020 6:08pm

Industrial Steel Workbench with Vice & Pinboard.
4 leg steel frame with steel sheet metal top (5mm steel sheet).
All 4 legs have mounting points on them.
150mm bench mounted vice, unknown make.
Workspace dimensions: L2405mm x W1230mm x H920mm.
Includes two undershelf storage compartments and a mounting point under the vice.
Condition - Please note that one of the legs is damaged and is close to snapping off - please see photos for more details.

Industrial Workshop Table
Industrial Workshop Table

Skylarc Ref T117869

Expected Auction End Time: 7th September 2020 6:55pm

Industrial Workshop Table.
4 leg steel frame with wooden top and backboard.
2 front legs have mounting points.
Top surface dimensions: L700mm x W585mm x H940mm.
Backboard dimensions: L670mm x W12 x H270mm.
Condition - Steel frame has minor surface rust, top and backboard have moderate marking and oil stains as to be expected in a workshop environment.

Avery 250kg Industrial Analog Platform Scale
Avery 250kg Industrial Analog Platform Scale

Skylarc Ref L117861

Expected Auction End Time: 6th September 2020 9:57pm

Avery 250kg Industrial Analog Platform Scale.
Made in England by Avery.
Type No. 3205ABA
250kg max capacity.
Weighing platform is approx 870x730mm and approx 185mm above floor.
Total unit height approx 1230mm

Mechpro 20m Wall Mounted Workshop Retractable Air Hose Reel w/ Hose
Mechpro 20m Wall Mounted Workshop Retractable Air Hose Reel w/ Hose

Skylarc Ref M117862

Expected Auction End Time: 7th September 2020 8:24pm

Mechpro 20m Wall Mounted Workshop Retractable Air Hose Reel w/ Hose.
Mechpro branded.
20m hose length.
Plastic hose reel exterior.

Assorted Lot of Steel Piping and Scrap Metal
Assorted Lot of Steel Piping and Scrap Metal

Skylarc Ref U118546

Expected Auction End Time: 6th September 2020 7:47pm

Assorted Lot of Steel Piping and Scrap Metal.
Various sizes and grades.

Jasol Hydro Foamer Spray Applicator Gun
Jasol Hydro Foamer Spray Applicator Gun

Skylarc Ref T118545

Expected Auction End Time: 7th September 2020 8:41pm

Jasol Hydro Foamer Spray Applicator Gun.
2.5L tank.

Enolt LL1500T LED Luminaire Industrial High Bay Light
Enolt LL1500T LED Luminaire Industrial High Bay Light

Skylarc Ref W118496

Expected Auction End Time: 6th September 2020 7:42pm

Enolt LL1500T LED Luminaire Industrial High Bay Light.
Make: Enolt.
Model: LL15TAN5NZ300.
The Enolt LED Twin High Bay light was designed specifically for suspended mount installations the LL1500T is fitted with one of the most efficient and reliable LED's available anywhere in the world.
22,000 Lumens.
210 Watt Input
Luminaire Efficacy 105 Lumens Per Watt.
>93% Driver Efficiency.
Cri >80.
Pf >0.975.
5,000k Colour Temp.

Enolt LL1500T LED Luminaire Industrial High Bay Light
Enolt LL1500T LED Luminaire Industrial High Bay Light

Skylarc Ref X118497

Expected Auction End Time: 7th September 2020 9:01pm

Enolt LL1500T LED Luminaire Industrial High Bay Light.
Make: Enolt.
Model: LL15TAN5NZ300.
The Enolt LED Twin High Bay light was designed specifically for suspended mount installations the LL1500T is fitted with one of the most efficient and reliable LED's available anywhere in the world.
22,000 Lumens.
210 Watt Input
Luminaire Efficacy 105 Lumens Per Watt.
>93% Driver Efficiency.
Cri >80.
Pf >0.975.
5,000k Colour Temp.

Enolt LL1500T LED Luminaire Industrial High Bay Light
Enolt LL1500T LED Luminaire Industrial High Bay Light

Skylarc Ref Y118498

Expected Auction End Time: 6th September 2020 8:27pm

Enolt LL1500T LED Luminaire Industrial High Bay Light.
Make: Enolt.
Model: LL15TAN5NZ300.
The Enolt LED Twin High Bay light was designed specifically for suspended mount installations the LL1500T is fitted with one of the most efficient and reliable LED's available anywhere in the world.
22,000 Lumens.
210 Watt Input
Luminaire Efficacy 105 Lumens Per Watt.
>93% Driver Efficiency.
Cri >80.
Pf >0.975.
5,000k Colour Temp.

Enolt LL1500T LED Luminaire Industrial High Bay Light
Enolt LL1500T LED Luminaire Industrial High Bay Light

Skylarc Ref Z118499

Expected Auction End Time: 7th September 2020 8:24pm

Enolt LL1500T LED Luminaire Industrial High Bay Light.
Make: Enolt.
Model: LL15TAN5NZ300.
The Enolt LED Twin High Bay light was designed specifically for suspended mount installations the LL1500T is fitted with one of the most efficient and reliable LED's available anywhere in the world.
22,000 Lumens.
210 Watt Input
Luminaire Efficacy 105 Lumens Per Watt.
>93% Driver Efficiency.
Cri >80.
Pf >0.975.
5,000k Colour Temp.

Enolt LL1500T LED Luminaire Industrial High Bay Light
Enolt LL1500T LED Luminaire Industrial High Bay Light

Skylarc Ref V118495

Expected Auction End Time: 6th September 2020 9:28pm

Enolt LL1500T LED Luminaire Industrial High Bay Light.
Make: Enolt.
Model: LL15TAN5NZ300.
The Enolt LED Twin High Bay light was designed specifically for suspended mount installations the LL1500T is fitted with one of the most efficient and reliable LED's available anywhere in the world.
22,000 Lumens.
210 Watt Input
Luminaire Efficacy 105 Lumens Per Watt.
>93% Driver Efficiency.
Cri >80.
Pf >0.975.
5,000k Colour Temp.

Large Assortment of Endmills/Tap Drills
Large Assortment of Endmills/Tap Drills

Skylarc Ref U118494

Expected Auction End Time: 7th September 2020 7:40pm

Large Assortment of Endmills/Tap Drills.
38 Individual Pieces.
Various material types: HSS, Carbide.
Sizes ranging from 210mm x 20mm to 70mm x 5mm.
See photo for more details.

2 x Vertex Electronic Edge Finder VPS-20
2 x Vertex Electronic Edge Finder VPS-20

Skylarc Ref T118493

Expected Auction End Time: 6th September 2020 7:37pm

2 x Vertex Electronic Edge Finder VPS-20
Accuracy: 5µm.
Battery: Type 23AE.
Battery Voltage: 12V.
Brand: Vertex
Contact Diameter: 10 mm.
Light Type: LED.
Measurement System: Metric.
Overall Length: 160 mm.
Shank Diameter: 20 mm.
Includes 2x wood cases.
Both units operate.

Workshop Work Table Workbench
Workshop Work Table Workbench

Skylarc Ref R118543

Expected Auction End Time: 7th September 2020 7:55pm

Workshop Work Table Workbench.
Work surface 815mm above floor.
17mm thick plywood top surface.
725mm high backboard of plywood for hanging tools etc.
Steel frame.
Holes in top for placing tooling or materials.
Shows typical wear and grime from workshop usage.

Mill Tool Holder NT40 x JTA6 M16 x 2.0P
Mill Tool Holder NT40 x JTA6 M16 x 2.0P

Skylarc Ref Q118542

Expected Auction End Time: 6th September 2020 7:02pm

Mill Tool Holder type NT40 x JTA6, M16 x 2.0P.
Manufacturer unknown.

2x BT40 Type Mill Tool Changing Vices w/ 3x Mill Tool Wrenches
2x BT40 Type Mill Tool Changing Vices w/ 3x Mill Tool Wrenches

Skylarc Ref P118541

Expected Auction End Time: 7th September 2020 8:18pm

2x BT40 Type Mill Tool Changing Vices w/ 3x Mill Tool Wrenches.
Includes:
- green Vice with vertical and horizontal mounts for BT40 size Tool Holders, measures approx 205x95x130mm.
- Black Tool Holder with rotatable mount. Has been modified with nuts Welded to top to hold toll, see photos. Vice is approx 135x75x150mn.
- 3x Mill Tool specialty Wrenches, two wrenches are marked as ER32 size and third larger Wrench is unmarked.
Condition - All units show moderate Workshop wear and usage.

Kennametal Lathe Boring Bar A25REVEML0310M
Kennametal Lathe Boring Bar A25REVEML0310M

Skylarc Ref O118540

Expected Auction End Time: 6th September 2020 6:46pm

Kennametal Lathe Boring Bar type A25REVEML0310M

6 x Assorted Workshop Part Drawers
6 x Assorted Workshop Part Drawers

Skylarc Ref S118492

Expected Auction End Time: 7th September 2020 7:13pm

6 x Assorted Workshop Part Drawers.
3 x Blue 25 Drawer Units (One unit is missing bottom of drawers.
1 x Yellow 23 Drawer Unit.
1 x Green 7 Drawer Unit.
1 x Red 10 Drawer Unit.

Kennametal Indexable Mill Drill KSEM200R5WN25M + 32mm Dia Mill Cutter
Kennametal Indexable Mill Drill KSEM200R5WN25M + 32mm Dia Mill Cutter

Skylarc Ref N118539

Expected Auction End Time: 6th September 2020 8:54pm

Kennametal Indexable Mill Drill type KSEM200R5WN25M.
Auction also Includes 32mm diameter, 220mm long Mill Cutter with no visible ID labeling. See photos for further details on this second Mill Cutter.

Kennametal Mill Cutter 50A05RS90ED14D
Kennametal Mill Cutter 50A05RS90ED14D

Skylarc Ref L118537

Expected Auction End Time: 7th September 2020 9:38pm

Kennametal Mill Cutter 50A05RS90ED14D

Kennametal Mill Cutter 63A06RS90ED14D
Kennametal Mill Cutter 63A06RS90ED14D

Skylarc Ref K118536

Expected Auction End Time: 6th September 2020 8:53pm

Kennametal Mill Cutter 63A06RS90ED14D

Mill Tool Holder BT40 ER32 SHORT E
Mill Tool Holder BT40 ER32 SHORT E

Skylarc Ref J118535

Expected Auction End Time: 7th September 2020 9:35pm

Mill Tool Holder BT40 ER32 SHORT E.
Manufacturer unknown.

Mill Tool Holder BT40 ER32 SHORT E
Mill Tool Holder BT40 ER32 SHORT E

Skylarc Ref I118534

Expected Auction End Time: 6th September 2020 6:52pm

Mill Tool Holder BT40 ER32 SHORT E.
Manufacturer unknown.

Erickson Mill Tool Holder BT40BSM022100M w/ Kennametal Cutter 50A06RS90ED14D
Erickson Mill Tool Holder BT40BSM022100M w/ Kennametal Cutter 50A06RS90ED14D

Skylarc Ref H118533

Expected Auction End Time: 7th September 2020 7:56pm

Erickson Mill Tool Holder BT40BSM022100M.
Includes atrached Kennametal mill Cutter type 50A06RS90ED14D.

Kennametal Mill Tool Holder BT40SM22100M
Kennametal Mill Tool Holder BT40SM22100M

Skylarc Ref G118532

Expected Auction End Time: 6th September 2020 9:22pm

Kennametal Mill Tool Holder BT40SM22100M

Seco Mill Cutter R220.53-0080-12-8A w/ BT40 Type Mill Tool Holder
Seco Mill Cutter R220.53-0080-12-8A w/ BT40 Type Mill Tool Holder

Skylarc Ref F118531

Expected Auction End Time: 7th September 2020 6:45pm

Seco Mill Cutter R220.53-0080-12-8A.
Includes BT40 Type Mill Tool Holder LAIP 00112050250.

Acrow Mill Tool Holder BT40-SM22-150
Acrow Mill Tool Holder BT40-SM22-150

Skylarc Ref E118530

Expected Auction End Time: 6th September 2020 9:55pm

Acrow Mill Tool Holder BT40-SM22-150

Assortment of Various Milling Toolings
Assortment of Various Milling Toolings

Skylarc Ref R118491

Expected Auction End Time: 7th September 2020 8:33pm

Assortment of Various Milling Toolings.
30 individual pieces.
Various drill bits (HSS and Carbide).
Please see photos for specifications.

Mill Tool Holder BT40 SM32X60 w/ Iscar Cutter HOF D100-06-32-R07
Mill Tool Holder BT40 SM32X60 w/ Iscar Cutter HOF D100-06-32-R07

Skylarc Ref D118529

Expected Auction End Time: 6th September 2020 7:35pm

Mill Tool Holder BT40 SM32X60, brand unknown.
Includes attached Iscar Mill Cutter type HOF D100-06-32-R07.

Rego Fix Mill Tool Holder BT40/ER32X070 H
Rego Fix Mill Tool Holder BT40/ER32X070 H

Skylarc Ref C118528

Expected Auction End Time: 7th September 2020 7:20pm

Rego Fix Mill Tool Holder BT40/ER32X070 H.
Made in Switzerland.
Includes 20mn Mill Drill attachment, see photos.

Mexin BT40 Type  Mill Tool Holder 20-453-40-20
Mexin BT40 Type Mill Tool Holder 20-453-40-20

Skylarc Ref S118518

Expected Auction End Time: 6th September 2020 8:32pm

Mexin BT40 Type Mill Tool Holder.
Part No. 20-453-40-20

Mill Tool Holder BT40 EM 32X110 E
Mill Tool Holder BT40 EM 32X110 E

Skylarc Ref B118527

Expected Auction End Time: 7th September 2020 7:30pm

Mill Tool Holder BT40 EM 32X110 E.
Manufacturer is unknown.

Erickson Mill Tool Holder BT40BER32070M
Erickson Mill Tool Holder BT40BER32070M

Skylarc Ref A118526

Expected Auction End Time: 6th September 2020 7:15pm

Erickson Mill Tool Holder BT40BER32070M

Erickson Mill Tool Holder BT40BER32070M
Erickson Mill Tool Holder BT40BER32070M

Skylarc Ref Z118525

Expected Auction End Time: 7th September 2020 9:17pm

Erickson Mill Tool Holder BT40BER32070M.

Mill Tool Holder BT40 ER32 60 E
Mill Tool Holder BT40 ER32 60 E

Skylarc Ref Y118524

Expected Auction End Time: 6th September 2020 8:19pm

Mill Tool Holder BT40 ER32 60 E.
Unknown manufacturer.

Assorted Lot of Milling Inserts
Assorted Lot of Milling Inserts

Skylarc Ref O118696

Expected Auction End Time: 7th September 2020 9:34pm

Assorted Lot of Milling Inserts.
Please see photos for specifications and qtys.

Mill Tool Holder BT40 ER32 60 E
Mill Tool Holder BT40 ER32 60 E

Skylarc Ref X118523

Expected Auction End Time: 6th September 2020 6:54pm

Mill Tool Holder BT40 ER32 60 E.
Unknown manufacturer.

Vertex Mill Tool Holder BT40-ER32-70
Vertex Mill Tool Holder BT40-ER32-70

Skylarc Ref W118522

Expected Auction End Time: 7th September 2020 7:18pm

Vertex Mill Tool Holder BT40-ER32-70.

Mexin BT40 Type  Mill Tool Holder
Mexin BT40 Type Mill Tool Holder

Skylarc Ref U118520

Expected Auction End Time: 7th September 2020 8:04pm

Mexin BT40 Type Mill Tool Holder.
Part No. 20-453-40-20

Mexin BT40 Type  Mill Tool Holder
Mexin BT40 Type Mill Tool Holder

Skylarc Ref T118519

Expected Auction End Time: 6th September 2020 6:20pm

Mexin BT40 Type Mill Tool Holder.
Part No. 20-453-40-20

Assorted Lot of Partial Sets of Kennametal Milling Inserts (21 Pieces)
Assorted Lot of Partial Sets of Kennametal Milling Inserts (21 Pieces)

Skylarc Ref Q118698

Expected Auction End Time: 7th September 2020 9:18pm

Assorted Lot of Partial Sets of Kennametal Milling Inserts (21 Pieces)
Please see photos for full specifications.
Qtys from top left to bottom right:
1, 1, 6, 4, 3, 4, 2.

Assorted Lot of Partial Sets of Iscar Milling Inserts (66 Pieces)
Assorted Lot of Partial Sets of Iscar Milling Inserts (66 Pieces)

Skylarc Ref R118699

Expected Auction End Time: 6th September 2020 7:01pm

Assorted Lot of Partial Sets of Iscar Milling Inserts (66 Pieces).
Please see photos for full specifications.
Qtys from top left to bottom right.
5, 7, 7, 6, 4, 8, 3, 9, 2, 8, 7.

Assortment of Seco CP500 Inserts (17 Peices)
Assortment of Seco CP500 Inserts (17 Peices)

Skylarc Ref J118171

Expected Auction End Time: 7th September 2020 7:23pm

Assortment of Seco CP500 Inserts (17 Peices).
11 x Seco 16EL1.75ISO ,CP500 Inserts.
6 x Seco 16EL14W ,CP500 Inserts.

Assorted Lot of Partial Sets of Seco Milling Inserts
Assorted Lot of Partial Sets of Seco Milling Inserts

Skylarc Ref P118697

Expected Auction End Time: 6th September 2020 9:16pm

Assorted Lot of Partial Sets of Seco Milling Inserts
Please see photos for full specifications and Quantities.

Rego Fix Mill Tool Holder BT40/ER32X070 H
Rego Fix Mill Tool Holder BT40/ER32X070 H

Skylarc Ref R118517

Expected Auction End Time: 7th September 2020 7:45pm

Rego Fix Mill Tool Holder BT40/ER32X070 H.
Made in Switzerland.

Assorted Lot of Partial Sets of ITS Milling Inserts (27 Pieces)
Assorted Lot of Partial Sets of ITS Milling Inserts (27 Pieces)

Skylarc Ref Q118490

Expected Auction End Time: 6th September 2020 7:28pm

Assorted Lot of Partial Sets of ITS Milling Inserts (27 Pieces)
Please see photos for full specifications.
Qtys from top left to bottom right.
3, 3, 5, 8, 1, 5, 2

Rego Fix Mill Tool Holder BT40/ER32X070 H
Rego Fix Mill Tool Holder BT40/ER32X070 H

Skylarc Ref Q118516

Expected Auction End Time: 7th September 2020 9:15pm

Rego Fix Mill Tool Holder BT40/ER32X070 H.
Made in Switzerland.

Rego Fix Mill Tool Holder BT40/ER32X070 H
Rego Fix Mill Tool Holder BT40/ER32X070 H

Skylarc Ref P118515

Expected Auction End Time: 6th September 2020 9:54pm

Rego Fix Mill Tool Holder BT40/ER32X070 H.
Made in Switzerland.

Rego Fix Mill Tool Holder BT40/ER32X070 H
Rego Fix Mill Tool Holder BT40/ER32X070 H

Skylarc Ref O118514

Expected Auction End Time: 7th September 2020 8:08pm

Rego Fix Mill Tool Holder BT40/ER32X070 H.
Made in Switzerland.

Rego Fix Mill Tool Holder BT40/ER32X070 H
Rego Fix Mill Tool Holder BT40/ER32X070 H

Skylarc Ref N118513

Expected Auction End Time: 6th September 2020 6:42pm

Rego Fix Mill Tool Holder BT40/ER32X070 H.
Made in Switzerland.

Rego Fix Mill Tool Holder BT40/ER32X070 H
Rego Fix Mill Tool Holder BT40/ER32X070 H

Skylarc Ref M118512

Expected Auction End Time: 7th September 2020 8:59pm

Rego Fix Mill Tool Holder BT40/ER32X070 H.
Made in Switzerland.

Mexin BT40 Type Mill Tool Holder 20-453-40-20.
Mexin BT40 Type Mill Tool Holder 20-453-40-20.

Skylarc Ref L118511

Expected Auction End Time: 6th September 2020 6:27pm

Mexin BT40 Type Mill Tool Holder.
Part No. 20-453-40-20.

Frank Phoenix Mill Tool Holder BT40 TER32
Frank Phoenix Mill Tool Holder BT40 TER32

Skylarc Ref O118488

Expected Auction End Time: 7th September 2020 9:45pm

Frank Phoenix Mill Tool Holder BT40 TER32.
Tension Compression TER32.

Mexin BT40 Type Mill Tool Holder 20-453-40-20
Mexin BT40 Type Mill Tool Holder 20-453-40-20

Skylarc Ref K118510

Expected Auction End Time: 6th September 2020 8:47pm

Mexin BT40 Type Mill Tool Holder.
Part No. 20-453-40-20.

Acrow Mill Tool Holder BT40-WER32-100
Acrow Mill Tool Holder BT40-WER32-100

Skylarc Ref H118481

Expected Auction End Time: 7th September 2020 6:58pm

Acrow Mill Tool Holder BT40-WER32-100

Rego Fix Mill Tool Holder BT40/ER32X100 H
Rego Fix Mill Tool Holder BT40/ER32X100 H

Skylarc Ref I118508

Expected Auction End Time: 7th September 2020 7:11pm

Rego Fix Mill Tool Holder BT40/ER32X100 H.
Made in Switzerland.

Rego Fix Mill Tool Holder BT40/ER32X100 H
Rego Fix Mill Tool Holder BT40/ER32X100 H

Skylarc Ref H118507

Expected Auction End Time: 6th September 2020 9:48pm

Rego Fix Mill Tool Holder BT40/ER32X100 H.
Made in Switzerland.

Rego Fix Mill Tool Holder BT40/ER32X100 H
Rego Fix Mill Tool Holder BT40/ER32X100 H

Skylarc Ref G118506

Expected Auction End Time: 7th September 2020 6:56pm

Rego Fix Mill Tool Holder BT40/ER32X100 H.
Made in Switzerland.

Rego Fix Mill Tool Holder BT40/ER32X100 H
Rego Fix Mill Tool Holder BT40/ER32X100 H

Skylarc Ref F118505

Expected Auction End Time: 6th September 2020 8:41pm

Rego Fix Mill Tool Holder BT40/ER32X100 H.
Made in Switzerland.

Rego Fix Mill Tool Holder BT40/ER32X100 H
Rego Fix Mill Tool Holder BT40/ER32X100 H

Skylarc Ref E118504

Expected Auction End Time: 7th September 2020 8:56pm

Rego Fix Mill Tool Holder BT40/ER32X100 H.
Made in Switzerland.

Mill Tool Holder BT40 ER32X100 E
Mill Tool Holder BT40 ER32X100 E

Skylarc Ref D118503

Expected Auction End Time: 6th September 2020 9:13pm

Mill Tool Holder BT40 ER32X100 E.
Manufacturer unknown.

Mill Tool Holder BT40 ER32X100 E
Mill Tool Holder BT40 ER32X100 E

Skylarc Ref C118502

Expected Auction End Time: 7th September 2020 6:05pm

Mill Tool Holder BT40 ER32X100 E.
Manufacturer unknown.

Mill Tool Holder BT40 ER32X100 E
Mill Tool Holder BT40 ER32X100 E

Skylarc Ref B118501

Expected Auction End Time: 6th September 2020 8:33pm

Mill Tool Holder BT40 ER32X100 E.
Manufacturer unknown.

Mill Tool Holder BT40 ER32X100 E
Mill Tool Holder BT40 ER32X100 E

Skylarc Ref A118500

Expected Auction End Time: 7th September 2020 9:47pm

Mill Tool Holder BT40 ER32X100 E.
Manufacturer unknown.

Frank Phoenix Mill Tool Holder BT40 TER32
Frank Phoenix Mill Tool Holder BT40 TER32

Skylarc Ref P118489

Expected Auction End Time: 6th September 2020 9:31pm

Frank Phoenix Mill Tool Holder BT40 TER32.
Tension Compression TER32.

4 x Seco Milling Blade Inserts (4073180)
4 x Seco Milling Blade Inserts (4073180)

Skylarc Ref B118163

Expected Auction End Time: 7th September 2020 8:22pm

4 x Seco Milling Blade Inserts (4073180).
MM16 - 16008 - C90 - M06 T 60M.
4073180
I06L.

Vertex Mill Tool Holder BT40-TA32-110
Vertex Mill Tool Holder BT40-TA32-110

Skylarc Ref N118487

Expected Auction End Time: 6th September 2020 6:22pm

Vertex Mill Tool Holder BT40-TA32-110

Kojex Mill Tool Holder BT40-WER32-100
Kojex Mill Tool Holder BT40-WER32-100

Skylarc Ref M118486

Expected Auction End Time: 7th September 2020 7:04pm

Kojex Mill Tool Holder BT40-WER32-100

Assorted Iscar Milling Inserts (20 Pieces)
Assorted Iscar Milling Inserts (20 Pieces)

Skylarc Ref C118164

Expected Auction End Time: 6th September 2020 7:25pm

Assorted Iscar Milling Inserts (20 Pieces).
10x Iscar TCGT 16T308-AS IC20.
10x TNMS 332-12 IC20 160408-12 IC20

Kojex Mill Tool Holder BT40-WER32-100
Kojex Mill Tool Holder BT40-WER32-100

Skylarc Ref L118485

Expected Auction End Time: 7th September 2020 6:33pm

Kojex Mill Tool Holder BT40-WER32-100.

Kojex Mill Tool Holder BT40-WER32-100
Kojex Mill Tool Holder BT40-WER32-100

Skylarc Ref K118484

Expected Auction End Time: 6th September 2020 7:57pm

Kojex Mill Tool Holder BT40-WER32-100.

Acrow Mill Tool Holder BT40-WER32-100
Acrow Mill Tool Holder BT40-WER32-100

Skylarc Ref J118483

Expected Auction End Time: 7th September 2020 6:58pm

Acrow Mill Tool Holder BT40-WER32-100.

Acrow Mill Tool Holder BT40-WER32-100
Acrow Mill Tool Holder BT40-WER32-100

Skylarc Ref I118482

Expected Auction End Time: 6th September 2020 6:07pm

Acrow Mill Tool Holder BT40-WER32-100.

20 x Seco SEEX1204AFN - E08 H25 Milling Insert (Aluminum)
20 x Seco SEEX1204AFN - E08 H25 Milling Insert (Aluminum)

Skylarc Ref D118165

Expected Auction End Time: 7th September 2020 7:48pm

20 x Seco SEEX1204AFN - E08 H25 Milling Insert (Aluminum).
SEEX1204AFN-E08 ,H25
SEEX1204AFN-E08
0212535 827
Made in Sweden
QTY 10
02426793
EDP 04940

Acrow Mill Tool Holder BT40-WER32-100
Acrow Mill Tool Holder BT40-WER32-100

Skylarc Ref G118480

Expected Auction End Time: 7th September 2020 6:44pm

Acrow Mill Tool Holder BT40-WER32-100.

Acrow Mill Tool Holder BT40-WER32-100
Acrow Mill Tool Holder BT40-WER32-100

Skylarc Ref F118479

Expected Auction End Time: 6th September 2020 8:11pm

Acrow Mill Tool Holder BT40-WER32-100

Acrow Mill Tool Holder BT40-WER32-100
Acrow Mill Tool Holder BT40-WER32-100

Skylarc Ref E118478

Expected Auction End Time: 7th September 2020 6:47pm

Acrow Mill Tool Holder BT40-WER32-100.

5x Kennametal Modular Drill Inserts (KSEM2000SPLM)
5x Kennametal Modular Drill Inserts (KSEM2000SPLM)

Skylarc Ref F118167

Expected Auction End Time: 6th September 2020 6:39pm

5x Kennametal Modular Drill Inserts (KSEM2000SPLM).
5x KSEM2000HPGM Ø20,00 KCPM45 E8KS.

Mill Tool Holder BT40 ER40X80 E w/ Kennametal Attachment Cutter
Mill Tool Holder BT40 ER40X80 E w/ Kennametal Attachment Cutter

Skylarc Ref D118477

Expected Auction End Time: 7th September 2020 7:08pm

Mill Tool Holder BT40 ER40X80 E, manufacturer unknown.
Includes Kennametal attachment Cutter type 25A03R050A25SED14-170.

Mill Tool Holder BT40 ODP 16X66 E w/ Attachment
Mill Tool Holder BT40 ODP 16X66 E w/ Attachment

Skylarc Ref C118476

Expected Auction End Time: 6th September 2020 8:43pm

Mill Tool Holder type BT40 ODP 16X66 E, unknown manufacturer.
Includes Ingersoll branded attachment cutter, unable to read type number from wear on Cutter, see photo.

Mill Tool Holder BT40 EM 20X45 E w/ Attachment
Mill Tool Holder BT40 EM 20X45 E w/ Attachment

Skylarc Ref B118475

Expected Auction End Time: 7th September 2020 8:49pm

Mill Tool Holder BT40 EM 20X45 E, unknown manufacturer.
Indexable Milling Cutter attached, ID markings not visible.

BT40 Type Mill Tool Holder
BT40 Type Mill Tool Holder

Skylarc Ref A118474

Expected Auction End Time: 6th September 2020 8:57pm

BT40 Type Mill Tool Holder.
Unable to locate a brand/model mark. Suspecting that this unit may have been modified by having its shank narrowed on a lathe to make it narrower, see photos. Attachment mounting end is approx 47mm diameter.

Assorted Kennametal Inserts (19 Pieces)
Assorted Kennametal Inserts (19 Pieces)

Skylarc Ref G118168

Expected Auction End Time: 7th September 2020 8:22pm

Assorted Kennametal Inserts (22 Pieces).
12 x ITS Kennametal 1-14 Insert ground Radius 1 6mm.
EDCT140416PDFRLDJ
EC1416FLDJ
KC410M
MILL 1-14 INSERT GROUND R=16 MM
2984360 117483432H8JC
7 x ITS Kennametal KC410M Inserts.
EC1008FLDJ EDCT10T308PDFRLDJ KC410M.

Mill Tool Holder BT40 ER32X100 E
Mill Tool Holder BT40 ER32X100 E

Skylarc Ref Y118472

Expected Auction End Time: 7th September 2020 8:17pm

Mill Tool Holder type BT40 ER32X100 E.
Manufacturer unknown.

Pinzbohr Mill Tool Holder type BT 340 27 100
Pinzbohr Mill Tool Holder type BT 340 27 100

Skylarc Ref X118471

Expected Auction End Time: 6th September 2020 7:37pm

Pinzbohr Mill Tool Holder type BT 340 27 100.
Includes Pinzbohr extender type P27 45
Includes Pinzbohr Boring Attachment 27 3606 with bore range of 29-40mm.

Pinzbohr Mill Tool Holder type BT 340 32 130 w/ Attachments
Pinzbohr Mill Tool Holder type BT 340 32 130 w/ Attachments

Skylarc Ref W118470

Expected Auction End Time: 7th September 2020 6:07pm

Pinzbohr Mill Tool Holder type BT 340 32 130.
Includes Pinzbohr extender type R 32 27 34.
Includes Pinzbohr Boring Attachment 27 1907 with bore range of 29-40mm.

2 Sets of Kennametal Turning Inserts (KCM25)
2 Sets of Kennametal Turning Inserts (KCM25)

Skylarc Ref H118169

Expected Auction End Time: 6th September 2020 7:04pm

2 Sets of Kennametal Turning Inserts (KCM25).
5 Pieces per set.
RCMT1204MO KCM25.
ANSI/ISO Turning Insert RC.
3758086 11795248B9TJ.
Note these are brand new and unopened.

ITS Kennametal 18mm Endmill Inserts (9 Peices)
ITS Kennametal 18mm Endmill Inserts (9 Peices)

Skylarc Ref I118170

Expected Auction End Time: 7th September 2020 8:30pm

ITS Kennametal 18mm Endmill Inserts (9 Peices).
KC410M EDCT180516PDFRLDJ EC1816F 18mm Endmill Insert .06 1.6mm RAD 2271090.

Iscar Cutting Inserts
Iscar Cutting Inserts

Skylarc Ref K118172

Expected Auction End Time: 6th September 2020 8:46pm

Iscar Cutting Inserts.
1 x Set of 10 CVMT 3-1-SM CCMT 09T304-SM IC907 inserts.
1 x Set of 10 DNMG 332-M3M DNMG 110408-M3M IC6025.
Please see photos for more details.

Mill Tool Holder BT40 EM 25X45 E
Mill Tool Holder BT40 EM 25X45 E

Skylarc Ref S118466

Expected Auction End Time: 7th September 2020 8:22pm

Mill Tool Holder type BT40 EM 25X45 E.
Manufacturer unknown.

Pagnoni Mill Tool Holder BT40M12X83 w/ Kennametal Attachment Cutter
Pagnoni Mill Tool Holder BT40M12X83 w/ Kennametal Attachment Cutter

Skylarc Ref R118465

Expected Auction End Time: 6th September 2020 7:29pm

Pagnoni Mill Tool Holder type BT40M12X83
Includes Kennametal Attachment Cutter type 25A03R035M12SED14.
Condition - Kennametal cutter appears unused but cannot verify. Tool holder shows generally light usage marks.

Mill Tool Holder BT40 EM 32X110 E
Mill Tool Holder BT40 EM 32X110 E

Skylarc Ref P118463

Expected Auction End Time: 7th September 2020 8:30pm

Mill Tool Holder BT40 EM 32X110 E.
Unknown manufacturer.

Rego Fix Mill Tool Holder BT40/WD 32X100
Rego Fix Mill Tool Holder BT40/WD 32X100

Skylarc Ref O118462

Expected Auction End Time: 6th September 2020 7:32pm

Rego Fix Mill Tool Holder.
Part No. BT40/WD 32X100
Made in Switzerland.

Kennametal KC410M Carbide Inserts 5 Pack
Kennametal KC410M Carbide Inserts 5 Pack

Skylarc Ref L118173

Expected Auction End Time: 7th September 2020 9:53pm

Kennametal KC410M Carbide Inserts 5 Pack
EDCT180516PDFRLDJ - EC1816FJ.

Vintage Ford Australia Mechanic Technical Training Manuals & More
Vintage Ford Australia Mechanic Technical Training Manuals & More

Skylarc Ref N118461

Expected Auction End Time: 6th September 2020 9:31pm

Vintage Ford Australia Mechanic Technical Training Manuals and More.
Includes the following Ford Australia RT Registered Technician Technical Training Bulletins:
- F Series 5.8L EEC IV Fuel Injection System.
- KF Laser Engine Management System.
- Corsair Electronic Concentrated Control System.
- Oscilloscope Waveforms.
Aldo includes a Vintage 1971 published High Performance with Fuel Injection book by Vernon Tomlinson.
Condition - Appear to have been in storage for a long time. Some stiffness from past water damage but all pages still easily usable. Non-Ford book shows more moderate wear.

Walter Lathe Tool Holder w/ Accessories
Walter Lathe Tool Holder w/ Accessories

Skylarc Ref L118199

Expected Auction End Time: 7th September 2020 8:12pm

Walter Lathe Tool Holder w/ Accessories.
Includes Walter branded items:
- Tool Holder Part No. MSS-E25L00-2525L with Walter attachment MSS-E25L21-GX24-2.
- Spare attachment MSS-E25L21-GX24-2 in case.
- 17x cutting inserts GX24-2E300N00-CF5.
Comdition - Tool Holder appears unused. Cases attachments and Inserts are as new in cases.

Mill Tool Holder SK40-FMB27
Mill Tool Holder SK40-FMB27

Skylarc Ref K118198

Expected Auction End Time: 6th September 2020 8:13pm

Mill Tool Holder SK40-FMB27.
Unknown manufacturer.
Some surface rust spotting.

Mill Tool Holder BT40 ER32X100 E
Mill Tool Holder BT40 ER32X100 E

Skylarc Ref J118197

Expected Auction End Time: 7th September 2020 8:06pm

Mill Tool Holder.
Unknown manufacturer.
Part No. BT40 ER32X100 E

Frank Phoenix Mill Tool Holder BT40 TER32
Frank Phoenix Mill Tool Holder BT40 TER32

Skylarc Ref I118196

Expected Auction End Time: 6th September 2020 7:26pm

Frank Phoenix Mill Tool Holder.
Part No. BT40 TER32

Mill Tool Holder BT40 ER40X80E
Mill Tool Holder BT40 ER40X80E

Skylarc Ref H118195

Expected Auction End Time: 7th September 2020 6:42pm

Mill Tool Holder.
Unknown manufacturer.
Part No. BT40 ER40X80E

Kennametal Mill Tool Holder BT40BSMC22100M
Kennametal Mill Tool Holder BT40BSMC22100M

Skylarc Ref G118194

Expected Auction End Time: 6th September 2020 7:14pm

Kennametal Mill Tool Holder.
Part No. BT40BSMC22100M

Mill Tool Holder BT40-ER32X100-E
Mill Tool Holder BT40-ER32X100-E

Skylarc Ref F118193

Expected Auction End Time: 7th September 2020 8:58pm

Mill Tool Holder.
Brand name Unknown
Part No. BT40-ER32X100-E.

Assortment of Various Endmills (13 Pieces)
Assortment of Various Endmills (13 Pieces)

Skylarc Ref M118174

Expected Auction End Time: 6th September 2020 10:00pm

Assortment of Various Endmills (13 Pieces)
1 x D16 d16 AP32 L92 Z3 HA45 CR0.2 6054888.
1 x Seco 55312QR050230 Siron-A 4929185 056 DC=12 Re1=0.5.
2 x D12 d12 AP26 L73 Z3 Ha45 C 5995889.
1 x D12 d12 Ap22 L72 Z3 Ha45 C 6125172
1 x D12 d12 Ap22 L72 Z3 Ha45 C 6091880
3 x D12 d12 Ap22 L72 Z3 Ha45 C 6125170
1 x Seco 553080R050Z3.0 - Siron-A 5187032 090 DC-8 re1=0.5.
1 x GARR VRX 10 x 50 Ballnose G81312001.
1 x Hanita Varmill (MT.) 4777 6x6 S/E.
1 x GARR 820M 4mm <45070> GR7770.

Rego Fix Mill Tool Holder BT40/KFD 22x055
Rego Fix Mill Tool Holder BT40/KFD 22x055

Skylarc Ref E118192

Expected Auction End Time: 7th September 2020 6:09pm

Rego Fix Mill Tool Holder.
Part No. BT40/KFD 22x055.
Made in Switzerland.

Acrow Mill Tool Holder BT40-ER16-200
Acrow Mill Tool Holder BT40-ER16-200

Skylarc Ref C118190

Expected Auction End Time: 7th September 2020 9:10pm

Acrow Mill Tool Holder.
Part No. BT40-ER16-200, 04/10.

Mill Tool Holder BT30 EM 32X110 E
Mill Tool Holder BT30 EM 32X110 E

Skylarc Ref B118189

Expected Auction End Time: 6th September 2020 6:25pm

Mill Tool Holder BT30 EM 32X110 E.
Unknown brand.

10x Assorted End Mills, Drills, Cutters, Reamer
10x Assorted End Mills, Drills, Cutters, Reamer

Skylarc Ref A118188

Expected Auction End Time: 7th September 2020 7:26pm

10x Assorted End Mills, Drills, Cutters, Reamer.
Includes:
- 4x Walter A1522-6.9 drills
- Iscar Indexable drill DCN 100-050-16R-5D.
- Unknown brand 13.49mm Reamer.
- Garr 1600, 16mm, 90 Deg.
- Sutton 20mm, 90 Deg.
- Sutton D175, 20.0mm.
- Gulring TIN 44638, 20.0mm.
- Dormer HSS 19.0mm
- Unknown brand flat nose end mill F3AA1600AWL45, K600.
- Iscar flat nose end mill EC120B25-3C12 IC900.
- Unknown brand and model of cutter.
Condition varies with each unit. Some are unused while others show varying levels of usage.

Assorted Small Endmills (9 Pieces)
Assorted Small Endmills (9 Pieces)

Skylarc Ref N118175

Expected Auction End Time: 6th September 2020 9:03pm

Assorted Small Endmills (9 Pieces).
3 x Garr 45070 - 4mm EM SQ 2 FLUTE S/E SMG
Series 820M Standard Length 2 Flute – Square End.
2 x SGS 46853 Z-Carb-AP Z1MPCR Center Cutting High Performance Regular Length Single End Variable Rake End Mill, 5 mm Dia Cutter, 0.3 mm Corner Radius, 13 mm Length of Cut, 4 Flutes, 6 mm Dia Shank, 57 mm OAL.
2 x SGS Kyocera 44551 4,0 ENDMILL 2FL SQ.
1 x SGS 46344 - SGS 46344 Z1MB Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 8 mm Cutting Diameter, 19 mm Cutting Length, 8 mm Shank Diameter, 63 mm Length
1 x Garr 27522 VRX 5x50x10 0.3mm C/R.

6x Assorted Mill Drill Bits
6x Assorted Mill Drill Bits

Skylarc Ref Z118187

Expected Auction End Time: 7th September 2020 8:19pm

6x Assorted Mill Drill Bits.
Includes:
- 5/8"
- 20mm
- 3x 3/4"
- 30mm
- morse Tapper adapter
Condition varies greatly with each unit. One unit has metal residue stuck to it.

48x Assorted Jobber Type Drill Bits
48x Assorted Jobber Type Drill Bits

Skylarc Ref Y118186

Expected Auction End Time: 6th September 2020 8:46pm

48x Assorted Jobber Type Drill Bits.
Assorted lengths up to 250mm.
Diameters range from 3.5mm up to 13mm.
Condition varies with each unit. Some show no use while others show varying levels of usage

Assorted Ballnose Endmills (6 Pieces)
Assorted Ballnose Endmills (6 Pieces)

Skylarc Ref O118176

Expected Auction End Time: 7th September 2020 6:57pm

Assorted Ballnose Endmills (6 Pieces).
5 x GARR <28700 > VRX 10x70mm E BALL "AITIN
GARR TOOL 10x70mm VRX BALL EM 
1 x EC-B3 10-22C10E72 IC900 010 010 an 22 L72 Z3 Ha45.

Adjustable Indexable Boring End Mill Attachment
Adjustable Indexable Boring End Mill Attachment

Skylarc Ref X118185

Expected Auction End Time: 6th September 2020 7:06pm

Adjustable Indexable Boring End Mill Attachment.
Pinzbohr branded.
Also marked with - 42, 5002, Bore Range 49-65mm.

8 x GARR 8X65mm VRX Ballnose Endmills
8 x GARR 8X65mm VRX Ballnose Endmills

Skylarc Ref P118177

Expected Auction End Time: 7th September 2020 7:16pm

8 x GARR 8X65mm VRX Ballnose Endmills.
EDP: 28640
8X65mm VRX BALL EM *AlTiN
Series VB
4 Flute – Rougher/Finisher
Ball End
AlTiN Coated
Solid submicron grain carbide end mill – center cutting

Assorted Flatnose Endmills (14 Pieces)
Assorted Flatnose Endmills (14 Pieces)

Skylarc Ref R118179

Expected Auction End Time: 6th September 2020 8:38pm

Assorted Flatnose Endmills (14 Pieces).
7 x Iscar EC-B3 05-13C06E50 IC900.
Tool diameter - 5mm; Grade - IC900; Coating - TiAlN; Cutting Edge Material - Carbide; Shank Diameter - 6mm.
5 x Iscar EC-B3 06-13C06E50 IC900.
Economical type 3 flute, 45° helix, center cutting, medium length solid carbide endmills.
2 x Seco 553060R020Z3.0-SIRON-A.
553060R02023.0-SIRON 206X14X055 D6 RC.2
690.

Assorted Flatnose Endmills (10 Pieces)
Assorted Flatnose Endmills (10 Pieces)

Skylarc Ref Q118178

Expected Auction End Time: 7th September 2020 8:26pm

Assorted Flatnose Endmills (10 Pieces).
9 x Iscar EC-B3 16-25C16E75 IC900 D16 d16 ap25 L75 73 M45 C.
1 x Seco 553160R050Z3.0-SIRONA 16X34X090 D16 R0 5.

Iscar Milling Cutter
Iscar Milling Cutter

Skylarc Ref V118183

Expected Auction End Time: 6th September 2020 8:56pm

Iscar Milling Cutter.
ID markings are worn so unable to read first two letters of type number ??90 F90A D 50-5-22.

6x Assorted Milling End Cutter Bits
6x Assorted Milling End Cutter Bits

Skylarc Ref U118182

Expected Auction End Time: 7th September 2020 8:02pm

6x Assorted Milling End Cutter Bits.
Unknown manufacturer and specific model numbers.
16mm and 20mm Diameter varieties.
See photos for details on specific cutting shapes etc.
Condition - Appear to be unused bits with no packaging.

10 x Iscar (EC-B3 08-19C08E63 IC900) Flatnose Endmills
10 x Iscar (EC-B3 08-19C08E63 IC900) Flatnose Endmills

Skylarc Ref S118180

Expected Auction End Time: 6th September 2020 9:03pm

10 x Iscar (EC-B3 08-19C08E63 IC900) Flatnose Endmills.
Economical type 3 flute, 45° helix, center cutting, short/medium length solid carbide endmills.

34mm HSS Morse Tapper Milling Drill Bit
34mm HSS Morse Tapper Milling Drill Bit

Skylarc Ref T118181

Expected Auction End Time: 7th September 2020 6:41pm

34mm HSS Morse Tapper Milling Drill Bit.
Unknown manufacturer.
Drill appears as new, unused but no packaging.

8 x Iscar EC-B3 12 26C12E73 Flatnose Endmills
8 x Iscar EC-B3 12 26C12E73 Flatnose Endmills

Skylarc Ref R118127

Expected Auction End Time: 6th September 2020 8:07pm

8 x Iscar EC-B3 12 26C12E73 Flatnose Endmills.
EC-83 12-26C12E73 IC900 D12 d12 ap26 L73 Z3 Ha45 C. Carbide.

2x Engineering Mill Lock Down Sets
2x Engineering Mill Lock Down Sets

Skylarc Ref A118162

Expected Auction End Time: 7th September 2020 9:27pm

2x Engineering Mill Lock Down Sets.
See photos for included components. Many original components are missing. Sets show Workshop grime and wear.

Engineering Mill Lock Down Set
Engineering Mill Lock Down Set

Skylarc Ref Z118161

Expected Auction End Time: 6th September 2020 8:19pm

Engineering Mill Lock Down Set.
See photos for included components. Some original components appear missing. Set shows Workshop grime and wear.

Engineering Mill Lock Down Set
Engineering Mill Lock Down Set

Skylarc Ref Y118160

Expected Auction End Time: 7th September 2020 6:05pm

Engineering Mill Lock Down Set.
See photos for included components. Some original components appear missing. Set shows Workshop grime and wear.

7 x ITA Iscar 32C16 Flatnose Endmills
7 x ITA Iscar 32C16 Flatnose Endmills

Skylarc Ref Q118126

Expected Auction End Time: 6th September 2020 7:10pm

7 x ITA Iscar 32C16 Flatnose Endmills.
3 flute, 45° helix medium length solid carbide endmills. Used for machining aluminum. 
(3 without cases).

3x Assorted Indexable  Mill Drill Cutters by Iscar & Kennametal
3x Assorted Indexable Mill Drill Cutters by Iscar & Kennametal

Skylarc Ref X118159

Expected Auction End Time: 7th September 2020 6:01pm

3x Assorted Indexable Mill Drill Cutters by Iscar & Kennametal.
Includes:
- Kennametal MT1625337, 34mm diameter.
- Iscar DR034-124-32-09-40-N, at 31mm diameter.
- Iscar DR034-136-32-09-40-N, at 34mm diameter.
Condition - All show moderate wear and usage. May need end repair, see photos.

Assorted Ballnose Endmills (10 Pieces)
Assorted Ballnose Endmills (10 Pieces)

Skylarc Ref P118125

Expected Auction End Time: 6th September 2020 7:48pm

Assorted Ballnose Endmills (10 Pieces).
9 x GARR 8x65mm HSAL 2FL BALL *ALUMA Series 1280KD.
1 x Sgs® 44574 S-carb® 47mb Ball Nose End High Performance Metric Regular Length End Mill, 8 Mm, 19 Mm Max Depth Of Cut, 2 Flutes, 8 Mm Shank, 63 Mm Oal

3x Assorted Indexable Mill Drill Cutters
3x Assorted Indexable Mill Drill Cutters

Skylarc Ref W118158

Expected Auction End Time: 7th September 2020 8:55pm

3x Assorted Indexable Mill Drill Cutters.
Includes:
- Iscar MiniTang T490 E90LN D25-3-C24-08-B-C.
- aporox 16mm diameter drill cutter with missing ID marks.
- Approx 31mn diameter drill cutter with missing ID marks.
Condition varies with each unit. All show wear and usage. Two show modifications to shank.

Assorted Ballnose Endmills (12 Pieces)
Assorted Ballnose Endmills (12 Pieces)

Skylarc Ref O118124

Expected Auction End Time: 6th September 2020 9:09pm

Assorted Ballnose Endmills (12 Pieces).
9 x Ball End Mills Garr Tool 43102 10.0mm Solid Carbide Ball End Mill <43102> 142B 10mm HSAL 10x70x24mm 2FL BALL END MILL.
3 x SGS 44575 47MB S-Carb High Performance End Mill, Uncoated, 10 mm Cutting Diameter, 22 mm Cutting Length, 10 mm Shank Diameter, 72 mm Length.

Assorted Flatnose Endmills (9 Pieces)
Assorted Flatnose Endmills (9 Pieces)

Skylarc Ref N118123

Expected Auction End Time: 7th September 2020 8:01pm

Assorted Flatnose Endmills (9 Pieces).
7 x ITA Iscar ECA-B-3 06-16C06-57 IC08 06 dh api 6 157 23 Had 5 C r0.2.
3 flute, 45° helix medium length solid carbide endmills. Used for machining aluminum.
2 x SGS 44701 6mm SER 43M S-CARB 3FL CARBIDE ALUMINIUM CUTTER 44701 13x57.

Assorted Flatnose Endmills (14 Pieces)
Assorted Flatnose Endmills (14 Pieces)

Skylarc Ref M118122

Expected Auction End Time: 6th September 2020 9:58pm

Assorted Flatnose Endmills (14 Pieces).
9 x ITA Iscar ECA-B-3 08-20C08-63 IC08 D8 d8 ap20 L63 Z3 Ha45 C r0.2.
3 flute, 45° helix medium length solid carbide endmills. Used for machining aluminum.
Note one of these pieces looks moderately worn/used - see photos.
5 x ITA Iscar EC-B3 08-19C08E63 IC900 18 8 a 19 143 145C.
Economical type 3 flute, 45° helix, center cutting, short/medium length solid carbide endmills.

Assorted Flatnose Endmills (11 Pieces)
Assorted Flatnose Endmills (11 Pieces)

Skylarc Ref L118121

Expected Auction End Time: 7th September 2020 7:16pm

Assorted Flatnose Endmills (11 Pieces)
10 x ITA Iscar ECA-B-3 10-22C10-72. (5 come without casing).
3 flute, 45° helix medium length solid carbide endmills. Used for machining aluminum.  
1 x ITA Iscar EC-B3 12-26C12E73 IC900.
Economical type 3 flute, 45° helix, center cutting, short/medium length solid carbide endmill.

67x Assorted Mill Tool Holder Collets, Assorted Sizes
67x Assorted Mill Tool Holder Collets, Assorted Sizes

Skylarc Ref R118153

Expected Auction End Time: 6th September 2020 8:58pm

67x Assorted Mill Tool Holder Collets, Assorted Sizes.
Iscar and Rego Fix brands.
61x units are Assorted sizes of ER32 type Collets and remaining 6x units are ER40 type Collets.
Condition varies greatly with each unit. Some appear excellent condition while others show rust spotting.

Assorted Flatnose Endmills
Assorted Flatnose Endmills

Skylarc Ref K118120

Expected Auction End Time: 7th September 2020 8:32pm

Assorted Flatnose Endmills.
Includes:
6 x ITA Iscar ECA B 3 12-25C12-83 IC08.
3 flute, 45° helix medium length solid carbide endmills. Used for machining aluminum.
4 x SGS 12,0 ENDMILL 3FL SQ TB S-CARB 12x12x26x83.
Flute Diameter 12mm Flute Length 26mm Material Carbide OAL 83mm Shank Diameter 12mm.

Trade Tools Optical Edge Finder/Sensor
Trade Tools Optical Edge Finder/Sensor

Skylarc Ref D118113

Expected Auction End Time: 7th September 2020 9:40pm

Trade Tools Optical Edge Finder/Sensor.
Model: 5992-20S 115mm.
Used in milling and lathe work.

Kennametal & SGS Branded End Mill Cutters
Kennametal & SGS Branded End Mill Cutters

Skylarc Ref P118151

Expected Auction End Time: 6th September 2020 7:59pm

Kennametal & SGS Branded End Mill Cutters.
Includes:
- Kennametal Flat Nose end mill UGDE0750J5BE.
- SGS Ball Nose end mill 44578, 16mm.
Both units include cases.
Condition - Both end Mills appear as new, unused leftover Workshop stock. Case exteriors show wear and grime from workshop storage.

Acrow Mill Tool Holder BT40-SLN20-063
Acrow Mill Tool Holder BT40-SLN20-063

Skylarc Ref O118150

Expected Auction End Time: 7th September 2020 7:16pm

Acrow Mill Tool Holder BT40-SLN20-063.
Includes original case.
Holder appears as new, unused. Case exterior shows wear and grime from workshop storage.

Seco Shoulder & Slot Mill Cutter R220.96-0050-08-4A
Seco Shoulder & Slot Mill Cutter R220.96-0050-08-4A

Skylarc Ref N118149

Expected Auction End Time: 6th September 2020 7:19pm

Seco Shoulder & Slot Mill Cutter.
Part No. R220.96-0050-08-4A.
Includes original plastic case.

Iscar Mill Cutter HM90 F90A D 63-6-22
Iscar Mill Cutter HM90 F90A D 63-6-22

Skylarc Ref M118148

Expected Auction End Time: 7th September 2020 7:59pm

Iscar Mill Cutter.
Part No. HM90 F90A D 63-6-22.
Cutter shows wear see photos.

Iscar Mill Cutter HOF D100-06-32-R07
Iscar Mill Cutter HOF D100-06-32-R07

Skylarc Ref L118147

Expected Auction End Time: 6th September 2020 8:23pm

Iscar Mill Cutter.
Part No. HOF D100-06-32-R07.
Cutter shows wear marks, see photos.

Insize Electronic Edge Finder (6566)
Insize Electronic Edge Finder (6566)

Skylarc Ref J118119

Expected Auction End Time: 7th September 2020 6:43pm

Insize Electronic Edge Finder (6566).
Accuracy: 5µm.
Battery: Type 23AE.
Battery Voltage: 12V.
Brand: Insize.
Contact Diameter: 10 mm.
Light Type: LED.
Measurement System: Metric.
Overall Length: 160 mm.
Shank Diameter: 20 mm.

Analogue Z Axial Preset Gauge (Indicator)–ZOV Type
Analogue Z Axial Preset Gauge (Indicator)–ZOV Type

Skylarc Ref F118115

Expected Auction End Time: 6th September 2020 7:06pm

Analogue Z Axial Preset Gauge (Indicator)–ZOV Type.
For setting tool length on machining centers / lathe centers.
2. Setting height : 50±0.005mm
3. Large measuring surface and easy to operate.
4. Low spring force to avoid breakage of small end mill and drill.
5. Easy to be calibrated by a ground parallel or gauge block.
6. ZIP-50A : Better parallelism, sensitivity, and precision for use.

Insize Electronic Edge Finder (6566)
Insize Electronic Edge Finder (6566)

Skylarc Ref I118118

Expected Auction End Time: 7th September 2020 9:29pm

Insize Electronic Edge Finder (6566).
Accuracy: 5µm.
Battery: Type 23AE.
Battery Voltage: 12V.
Brand: Insize.
Contact Diameter: 10 mm.
Light Type: LED.
Measurement System: Metric.
Overall Length: 160 mm.
Shank Diameter: 20 mm.

Sandvik Coromant Lathe Turning Tool Holder STGCL 2525M16
Sandvik Coromant Lathe Turning Tool Holder STGCL 2525M16

Skylarc Ref K118146

Expected Auction End Time: 6th September 2020 8:08pm

Sandvik Coromant Lathe Turning Tool Holder.
Part No. STGCL 2525M16

Portable Refractometer (RHB - 32ATC)
Portable Refractometer (RHB - 32ATC)

Skylarc Ref H118117

Expected Auction End Time: 7th September 2020 7:56pm

Portable Refractometer (RHB - 32ATC).
High quality pure aluminum body construction.
Uses ambient light only which means battery or power source is not required.
Easy to focus and calibrate.
Cushioned with soft & comfortable non-slip rubber.
With ATC function (ATC Compensation).
Durable and built to last long.

Stellram Lathe Turning Tool Holder STJCL2525M16
Stellram Lathe Turning Tool Holder STJCL2525M16

Skylarc Ref J118145

Expected Auction End Time: 6th September 2020 7:36pm

Stellram Lathe Turning Tool Holder.
Part No. STJCL2525M16

Kennametal Lathe Tool Holder A2TZN 2523J32
Kennametal Lathe Tool Holder A2TZN 2523J32

Skylarc Ref I118144

Expected Auction End Time: 7th September 2020 6:24pm

Kennametal Lathe Tool Holder.
Holder part No. A2TZN 2523J32.
Includes attached Kennametal branded tool.

Portable Refractometer (RHB - 32ATC)
Portable Refractometer (RHB - 32ATC)

Skylarc Ref G118116

Expected Auction End Time: 6th September 2020 6:18pm

Portable Refractometer (RHB - 32ATC)
High quality pure aluminum body construction.
Uses ambient light only which means battery or power source is not required.
Easy to focus and calibrate.
Cushioned with soft & comfortable non-slip rubber.
With ATC function (ATC Compensation).
Durable and built to last long.

Analogue Z Axial Preset Gauge (Indicator)–ZOV Type
Analogue Z Axial Preset Gauge (Indicator)–ZOV Type

Skylarc Ref E118114

Expected Auction End Time: 7th September 2020 8:44pm

Analogue Z Axial Preset Gauge (Indicator)–ZOV Type.
For setting tool length on machining centers / lathe centers.
2. Setting height : 50±0.005mm
3. Large measuring surface and easy to operate.
4. Low spring force to avoid breakage of small end mill and drill.
5. Easy to be calibrated by a ground parallel or gauge block.
6. ZIP-50A : Better parallelism, sensitivity, and precision for use.

Iscar Lathe Tool Holder MTJNL 2525M-16W
Iscar Lathe Tool Holder MTJNL 2525M-16W

Skylarc Ref H118143

Expected Auction End Time: 6th September 2020 8:05pm

Iscar Lathe Tool Holder.
Part No. MTJNL 2525M-16W

Kennametal Lathe Tool Holder MTJNL 2525M16H4
Kennametal Lathe Tool Holder MTJNL 2525M16H4

Skylarc Ref G118142

Expected Auction End Time: 7th September 2020 6:09pm

Kennametal Lathe Tool Holder.
Part No. MTJNL 2525M16H4

Kennametal Lathe Tool Holder SRGCL 2525M12
Kennametal Lathe Tool Holder SRGCL 2525M12

Skylarc Ref F118141

Expected Auction End Time: 6th September 2020 6:48pm

Kennametal Lathe Tool Holder.
Part No. SRGCL 2525M12

Seco Snap Tap Lathe Tool Holder CEL2525M16HD
Seco Snap Tap Lathe Tool Holder CEL2525M16HD

Skylarc Ref D118139

Expected Auction End Time: 7th September 2020 8:21pm

Seco Lathe Snap Tap Tool Holder.
Part No. CEL2525M16HD

Walter Lathe Boring Bar Tool A32T-STFCL16
Walter Lathe Boring Bar Tool A32T-STFCL16

Skylarc Ref C118138

Expected Auction End Time: 6th September 2020 9:28pm

Walter Lathe Boring Bar Tool.
Part No. A32T-STFCL16
Includes case.
Appears unused but cannot verify, see photos. Case exterior shows wear from workshop storage.

2 x Hydrolic Jacks
2 x Hydrolic Jacks

Skylarc Ref B118111

Expected Auction End Time: 7th September 2020 6:30pm

2 x Hydrolic Jacks.
Includes 1 x 3 Ton trolly jack (not functioning) and 1 small jack with not weight capacity or branding (functioning).

Spitfire DC25 Diesel/Kerosene Workshop Heater (Likely Faulty)
Spitfire DC25 Diesel/Kerosene Workshop Heater (Likely Faulty)

Skylarc Ref W117898

Expected Auction End Time: 6th September 2020 9:28pm

Spitfire DC25 Diesel/Kerosene Workshop Heater (Likely Faulty).
Make: Spitfire
Model: DC25
Fuel Types: Diesel, Kerosene.
Power Input: 240V, 50Hz, 1Ph, 180W, 1.4A.
Heat Output: 0.34bar, 2.2kg/h, 26.00kw.
Movile unit with two wheels at front.
Unit has NOT been tested. Markings suggest unit needs to be "looked at" before functioning, note last electrical test was done 2015.
Electrical start panel has is unsecured - see photos.

Industrial Wall Mounted Material Storage Racks
Industrial Wall Mounted Material Storage Racks

Skylarc Ref X117899

Expected Auction End Time: 7th September 2020 7:36pm

Industrial Wall Mounted Material Storage Racks.
Steel frame construction 8 tier Storage rack.
Wall mountable.
See final photos for full dimensions.

Iscar Lathe Turning Tool PDJNR 2525M-11
Iscar Lathe Turning Tool PDJNR 2525M-11

Skylarc Ref Z118135

Expected Auction End Time: 6th September 2020 7:01pm

Iscar Lathe Turning Tool.
Part No. PDJNR 2525M-11
Includes case.
Condition - Tool appears unused. Case exterior shows Workshop Storage wear and grime.

Iscar Lathe Turning Tool SRGCR 2525M-12
Iscar Lathe Turning Tool SRGCR 2525M-12

Skylarc Ref Y118134

Expected Auction End Time: 7th September 2020 8:21pm

Iscar Lathe Turning Tool.
Part No. SRGCR 2525M-12
Includes case.
Appears unused. Case exterior shows Workshop Storage wear.

10 Tonne Capacity Hydraulic Body-Frame Repair Kit (Incomplete)
10 Tonne Capacity Hydraulic Body-Frame Repair Kit (Incomplete)

Skylarc Ref A118110

Expected Auction End Time: 6th September 2020 7:10pm

10 Tonne Capacity Hydraulic Body-Frame Repair Kit.
Repair kit is missing key parts.
Usefull as spares.

Engineering Mill Vice
Engineering Mill Vice

Skylarc Ref W118132

Expected Auction End Time: 7th September 2020 7:44pm

Engineering Mill Vice.
Model No. HYA150.
150mm wide Jaws.
Mounting slots are spaced approx 180mm apart on centre in width and approx 580mm apart lengthwise.
Includes Vice crank.

Lot of Assorted Aluminum Sheets and Floor Pieces
Lot of Assorted Aluminum Sheets and Floor Pieces

Skylarc Ref V117897

Expected Auction End Time: 6th September 2020 9:17pm

Lot of Assorted Aluminum Sheets/Plates and Floor Pieces.
31 Individual Pieces.
Includes:
22 x 4mm Honeycomb non slip floor panels ranging from: 2400mm x 640mm to 560mm x 550mm.
5 x Aluminum sheets ranging from: 1200mm x 840mm to 600mm x 590mm.
1 x 4mm Perforated Flooring Panel (2400mm x 840mm)
2 x 10mm Aluminum Slab (2400mm x 615mm, 2300mm x 580mm).
1 x 5mm Aluminum Sheet (3000mm x 1500mm).
Note does NOT include the rack in photos.

Industrial Material Storage Rack
Industrial Material Storage Rack

Skylarc Ref S117894

Expected Auction End Time: 7th September 2020 6:21pm

Industrial Material Storage Rack
Steel Frame 6 post/2 slot material storage rack.

Engineering Mill Vice
Engineering Mill Vice

Skylarc Ref V118131

Expected Auction End Time: 6th September 2020 8:07pm

Engineering Mill Vice.
Made in Taiwan by Auto Wells.
155mm jaw width.
Mounting slots are approx 200mm apart on centre to sides and approx 580mm on centre lengthwise.
Note - Vice crank is missing and therefore NOT included.

8 Extension Leads (Assorted Lengths)
8 Extension Leads (Assorted Lengths)

Skylarc Ref Y118108

Expected Auction End Time: 7th September 2020 7:49pm

8 Extension Leads (Assorted Lengths).
8 Standard Power Extension Leads/Cables of carrying length.
Used in a workshop and have moderate dust/oil stains.

BOC Acetylene/Oxygen Cutting/Welding Torch
BOC Acetylene/Oxygen Cutting/Welding Torch

Skylarc Ref X118107

Expected Auction End Time: 6th September 2020 8:35pm

BOC Acetylene/Oxygen Cutting/Welding Torch.
Comes with Torch attachment, hoses, valves and a carrying case (different brand) with other small attachments - See photos.

Pair of 1075mm Bar Clamps
Pair of 1075mm Bar Clamps

Skylarc Ref W118106

Expected Auction End Time: 7th September 2020 9:43pm

Pair of 1075mm Bar Clamps.

Mobile Workshop Table Workbench
Mobile Workshop Table Workbench

Skylarc Ref U118130

Expected Auction End Time: 6th September 2020 6:22pm

Mobile Workshop Table Workbench.
Heavy duty steel frame on heavy Duty Castors.
Plywood top and lower surfaces.
Top surface has 32x 50mm diameter holes for holding Assorted tooling, parts, etc.
Unit shows moderate wear and grime from engineering Workshop usage.

11 Metre 3-Phase 32Amp (500V, 50Hz) Extension Lead
11 Metre 3-Phase 32Amp (500V, 50Hz) Extension Lead

Skylarc Ref V118105

Expected Auction End Time: 7th September 2020 7:00pm

11 Metre 3-Phase 32Amp (500V, 50Hz) Extension Lead.

2x Workshop Office Desks
2x Workshop Office Desks

Skylarc Ref T118129

Expected Auction End Time: 6th September 2020 9:13pm

2x Workshop Office Desks.
Large desk is approx 1690x1085x775mm. Has 8x drawers in front and 2x storage compartments in rear.
Small desk is approx 1190x710x770mm. Has one drawer and one foot in front.
Condition - Both units have been used as Workshop office desks. Both show moderate to heavy wear and usage. Workshop grime and dust on units, may benefit from a heavy cleanup.

3 x Industrial Wall Mounted Material Wall Rack Posts
3 x Industrial Wall Mounted Material Wall Rack Posts

Skylarc Ref U118104

Expected Auction End Time: 7th September 2020 9:40pm

3 x Industrial Wall Mounted Material Wall Rack Posts.
Steel frame construction wall mounted posts.
Two are semi matching (slight dimensions variation) and one is on its own.
See last photos for dimensions.

Workshop Workbench Station
Workshop Workbench Station

Skylarc Ref S118128

Expected Auction End Time: 6th September 2020 8:47pm

Workshop Workbench Station.
Heavy duty steel frame.
17mm thick plywood work surface approx 1200mm long, 785mm wide, and 810mm above floor.
850mm high backboard with a aluminium shelf 1190x165mm.
2x backside aluminium shelves 270mm and 230mm width.
Total unit height approx 1660mm.
Condition - Unit shows typical workshop wear and usage.

Industrial Workshop Belt Sander
Industrial Workshop Belt Sander

Skylarc Ref T118103

Expected Auction End Time: 7th September 2020 7:20pm

Industrial Workshop Belt Sander.
Unknoen manufacturer and model, possibly custom built.
3-phase 32A power plug.
Includes 3x spare unused Kingspor branded replacement sanding belts type CS 409 Y 40.
Sanding belts are 100mm wide.
Unable to test as no 3-phase 32A outlet available.

Workshop L-Shaped Corner Work Table Workbench
Workshop L-Shaped Corner Work Table Workbench

Skylarc Ref S118102

Expected Auction End Time: 6th September 2020 9:46pm

Workshop L-Shaped Corner Work Table Workbench.
6mm thick sheet steel top surface.
12mm thick plywood lower shelf.
Heavy duty steel frame.
Top surface width approx 605mm.
Two bolts in top surface for mounting a Vice.
Shows typical workshop wear and usage.

BOC Smoothcut Plasma 100 Welder and Trolley
BOC Smoothcut Plasma 100 Welder and Trolley

Skylarc Ref R117893

Expected Auction End Time: 7th September 2020 7:22pm

BOC Smoothcut Plasma 100 Welder and Trolley.
Input voltage Three phase AC420V ±15%
Frequency 50/60Hz
Maximum rated input current (I1max) 20A
Maximum effective supply current (I1eff) 14A
Rated output current range 20–100A
Output voltage range 20–120V
Duty cycle 60% 100A
Efficiency 85%
Power factor 0.93
Arc initiation Stand off
Maximum cutting thickness (mild steel) 25mm
Air pressure requirement 4-5bar

High Speed Resin Abrasive Wheel Cut Off Machine
High Speed Resin Abrasive Wheel Cut Off Machine

Skylarc Ref U117896

Expected Auction End Time: 6th September 2020 9:20pm

High Speed Resin Abrasive Wheel Cut Off Machine.
Wheel Dimensions: 400 x 3 x 25. 4(32).
Voltage: 380V AC.
Periodicity: 50Hz
Revolution: 2242RPM.
Rotational Direction: Left-Hand.
Angle Range of Jaws: 0- +45°.
Power: 2.2Kw.
Motor:
Three phase electrical motor.
2800rpm, 2.2Kw.
50Hz, 4.64A.
Comes with 5 extra disks.

Pair or Workshop Saw Horses
Pair or Workshop Saw Horses

Skylarc Ref T117895

Expected Auction End Time: 7th September 2020 7:02pm

Pair or Workshop Saw Horses.
Hollow steel construction.
See individual dimensions below.

Self Standing Workshop Wall Unit
Self Standing Workshop Wall Unit

Skylarc Ref R118101

Expected Auction End Time: 6th September 2020 6:13pm

Self Standing Workshop Wall Unit.
Frame is made from 50x50mm hollow box Steel lengths.
Wall surfaces is 9mm thick MDF boards.
See our other listings for more of these type of units.
Unit would benefit from a second horizontal support beam to make it level, see photos.

Hinged Workshop Wall or Door Unit
Hinged Workshop Wall or Door Unit

Skylarc Ref Q118100

Expected Auction End Time: 7th September 2020 8:14pm

Hinged Workshop Wall or Door Unit.
Frame is made from 50x50mm hollow box Steel lengths.
Wall surface is 9mm thick MDF boards.
This unit is NOT self supporting, it will need to be connected to a building wall or other self supporting unit.
See our other listings for more of these type of units.

Hinged Workshop Wall or Door Unit
Hinged Workshop Wall or Door Unit

Skylarc Ref P118099

Expected Auction End Time: 6th September 2020 9:41pm

Hinged Workshop Wall or Door Unit.
Frame is made from 50x50mm hollow box Steel lengths.
Wall surface is 9mm thick MDF boards.
This unit is NOT self supporting, it will need to connected to a building wall or other self supporting unit.
See our other listings for more of these type of units.

Self Standing Workshop Wall Unit
Self Standing Workshop Wall Unit

Skylarc Ref N117889

Expected Auction End Time: 7th September 2020 9:34pm

Self Standing Workshop Wall Unit.
Frame is made from 50x50mm hollow box Steel lengths.
Wall surfaces is 9mm thick MDF boards.
See our other listings for more of these type of units.

Self Standing Workshop Wall Unit
Self Standing Workshop Wall Unit

Skylarc Ref M117888

Expected Auction End Time: 6th September 2020 9:23pm

Self Standing Workshop Wall Unit.
Frame is made from 50x50mm hollow box Steel lengths.
Wall surfaces is 9mm thick MDF boards.
See our other listings for more of these type of units.

Luxcut Industrial Grade Belt Sander
Luxcut Industrial Grade Belt Sander

Skylarc Ref H117883

Expected Auction End Time: 7th September 2020 9:31pm

Luxcut Industrial Grade Belt Sander.
Luxcut branded.
Model No. 752.
Belt size 2000x75mm.
Motor - 3KW, 400V 50Hz.
3-Phase powered.
Condition - Operates normaly. Plastic end guard needs reattaching, see photos. Shows typical engineering Workshop wear and usage.

Self Standing Workshop Wall Unit
Self Standing Workshop Wall Unit

Skylarc Ref L117887

Expected Auction End Time: 6th September 2020 9:29pm

Self Standing Workshop Wall Unit.
Frame is made from 50x50mm hollow box Steel lengths.
Wall surfaces is 9mm thick MDF boards.
See our other listings for more of these units.

Chicago Pneumatic CPX40 Refrigerated Air Dryer
Chicago Pneumatic CPX40 Refrigerated Air Dryer

Skylarc Ref W117872

Expected Auction End Time: 7th September 2020 8:40pm

Chicago Pneumatic CPX40 Refrigerated Air Dryer.
Make: Chicago Pneumatic.
Model: CPX40.
Refrigerated Air Dryer.
Specifications:
CFM @ 100 PSIG: 43.
Max Pressure: 232.
Power (V, Ph, Hz): 115/230/60/1 
Refrig type: R-134A.
Noise (dba): 53.
Please see photos for more detailed specifications.
Unit has NOT been tested.

Industrial Workbench with Backboard & Vice
Industrial Workbench with Backboard & Vice

Skylarc Ref R117867

Expected Auction End Time: 6th September 2020 6:56pm

Industrial Workbench with Backboard & Vice.
Steel frame with wooden tops.
Top workspace dimensions: H2395mm x W1200mm x H900.
Bottom shelf dimensions: L1980mm x W1180mm x H385mm.
Back board dimensions: L1200MM X W55MM X H1200MM.
Vice: Unknown make, bench mounted vice max opening: 145mm x grip length: 125mm.
Includes a white board mounted to backboard.
Condition - Table has moderate ware as to be expected in workshop environment.

Industrial Bench/Shelving Unit
Industrial Bench/Shelving Unit

Skylarc Ref Q117866

Expected Auction End Time: 7th September 2020 6:58pm

Industrial Bench/Shelf Unit.
6 leg steel frame with wooden shelve/top.
2 Shelves.
Both shelves are 2400mm x 600mm.
All 4 outer legs have mounting points.
Condition - Steel frame has moderate surface rust and wooden tops have moderate oil stains.

Mobile Workshop Trolley w/ Self Height Adjusting Platform
Mobile Workshop Trolley w/ Self Height Adjusting Platform

Skylarc Ref C119048

Expected Auction End Time: 6th September 2020 9:17pm

Mobile Workshop Trolley w/ Self Height Adjusting Platform.
Manufactured by Bishamon, id plate is worn so model number unknown.
Max weight capacity 400kg.
Platform dimensions approx 1010x515mm.
Spring loaded platform cyrently set to 455mm. Appears to be adjustable up to approx 670mm.
Condition - Shows moderate wear and surface grime. Rolls smoothly. Some rusty components.

Steel Workshop or Office Storage Cabinet
Steel Workshop or Office Storage Cabinet

Skylarc Ref B119047

Expected Auction End Time: 7th September 2020 6:29pm

Steel Workshop or Office Storage Cabinet.
Precision branded.
2x inner adjustable shelves.
Lockable, key is missing.
Condition - Shows surface finish wear, some small dents, a few rust spots, etc.

Steel Workshop or Office Storage Cabinet
Steel Workshop or Office Storage Cabinet

Skylarc Ref Z119045

Expected Auction End Time: 6th September 2020 7:03pm

Steel Workshop or Office Storage Cabinet.
Manufactured by RV Allex Harvey & Sons.
5x inner adjustable shelves.
Lockable, keys are missing.
Condition - Some rust spotting in areas, Finish wear, and some small denting. 3x shelves are missing support brackets.

Slik 35DN Tripod
Slik 35DN Tripod

Skylarc Ref A119046

Expected Auction End Time: 7th September 2020 7:46pm

Slik 35DN Tripod.
Sturdy, versatile, 1.5M High.

25x Assorted Lifting Eye Bolts
25x Assorted Lifting Eye Bolts

Skylarc Ref W119042

Expected Auction End Time: 6th September 2020 8:01pm

25x Assorted Lifting Eye Bolts.
Bolt sizes range from M20 up to M36.
Condition varies with each unit.

3 x 120mm Drive Socket Wrenchs
3 x 120mm Drive Socket Wrenchs

Skylarc Ref X119043

Expected Auction End Time: 7th September 2020 8:14pm

3 x 120mm Drive Socket Wrenchs
2 x Sidechrime 2256-8, 1 x Gedore 3293Z.

66x Assorted Lifting Eye Bolts
66x Assorted Lifting Eye Bolts

Skylarc Ref Y119044

Expected Auction End Time: 6th September 2020 6:53pm

66x Assorted Lifting Eye Bolts.
Bolt sizes range from M8 up to M20.
Condition varies with each unit.

8x Assorted Lifting D-Shackles & Hamnerlock
8x Assorted Lifting D-Shackles & Hamnerlock

Skylarc Ref V119041

Expected Auction End Time: 7th September 2020 8:38pm

8x Assorted Lifting D-Shackles & Hamnerlock.
One large D-Shackle with 50mm inner spacing.
6x Assorted smaller D-Shackles.
Includes 1x Hamnerlock PWB HA800 7-8mm unit.
Condition varies with each unit.

Set of Steel Parallels
Set of Steel Parallels

Skylarc Ref U119040

Expected Auction End Time: 6th September 2020 9:42pm

Set of Steel Parallels.
2 x L240mm x W90mm x H20mm.
Note one has a moderate gash in it. See photos.

Safa Toolbox and Assorted Tools
Safa Toolbox and Assorted Tools

Skylarc Ref S119038

Expected Auction End Time: 7th September 2020 7:33pm

Safa Toolbox and Assorted Tools.
Red Safa branded tool chest.
With assorted tools, please see photos for details.

30+ Assorted Hex Keys, in sizes up to 32mm Diameter
30+ Assorted Hex Keys, in sizes up to 32mm Diameter

Skylarc Ref T119039

Expected Auction End Time: 6th September 2020 9:55pm

30+ Assorted Hex Keys, in sizes up to 32mm Diameter.
Includes assorted sizes. 2x units are 32mm diameter, 4x units are 27mm diameter, all others vary in size from 9mm to 20mm.
Condition varies greatly with each unit.

Pair of Carver T Slot Clamps
Pair of Carver T Slot Clamps

Skylarc Ref O119034

Expected Auction End Time: 7th September 2020 8:12pm

Pair of Carver T Slot Clamps.
Light Duty T400/2.
Carver T-slot clamps are patented (0170153), heavy-duty clamps that are used to securely hold workpieces on many different machines and applications.
See last photo for dimensions.

4x C-Clamps & More
4x C-Clamps & More

Skylarc Ref R119037

Expected Auction End Time: 6th September 2020 6:09pm

4x C-Clamps & More.
Includes:
- 2x Vice Grip branded C-Clamps.
- 2x red handled C-Clamps, Unknown brand.
- 1x Zerem branded gripping tool model Grip 300S.
Condition - All units show moderate wear and use.

Blue Point Speed Blaster Air Powered Sand Blaster
Blue Point Speed Blaster Air Powered Sand Blaster

Skylarc Ref Q119036

Expected Auction End Time: 7th September 2020 9:09pm

Blue Point Speed Blaster Air Powered Sand Blaster.
Made in USA by Blue Point.
Model No. PSB-100.

6x Assorted 165-200mm G-Clamps
6x Assorted 165-200mm G-Clamps

Skylarc Ref P119035

Expected Auction End Time: 6th September 2020 9:15pm

6x Assorted 165-200mm G-Clamps.
Unknown manufacturers.
Two units are stamped DC Ross.
Inner gap spacing varies from approx 165mm up to 200mm.
Condition - All show moderate wear and use. Some have slight bends to threaded shafts.

58x Pairs of Workshop Gloves
58x Pairs of Workshop Gloves

Skylarc Ref N119033

Expected Auction End Time: 7th September 2020 7:16pm

58x Pairs of Workshop Gloves.
Includes:
- 48x pairs of White Cotton gloves with brown wrist trim, size unknown.
- 10x Pairs of green liquid proof gloves. Nine pair are Lynn River brand type 62024, size XL. One pair is Pro EN388, 4221. Includes one extra right hand glove.
Condition - Leftover unused workshop staff stock. Some green gloves show dust/dirt from exposed storage. White gloves in plastic bags.

2 x Workshop Lights
2 x Workshop Lights

Skylarc Ref M119032

Expected Auction End Time: 6th September 2020 7:14pm

2 x Workshop Lights.
1 x Arlec Electronic Fluoro Worklight (230-240VAC, 50Hz, 11W).
1 x Unknown brand standing desk light (Unknown power specifications).
Both lights have been tested and operate.

Assorted Partial Sets of Various Vintage Tap/Die Sets and More.
Assorted Partial Sets of Various Vintage Tap/Die Sets and More.

Skylarc Ref A119020

Expected Auction End Time: 7th September 2020 7:31pm

Assorted Partial Sets of Various Vintage Tap/Die Sets and More.
2 Cases of Tap and Die Partial Set Kits.
1 Case with 5mm Go/No Go Thread Guage.
2 Cases with 14 Die Grinder bits.
Includes 3 Wooden Flat Cases and 2 Wooden Cylindrical Cases.
Please see photos dor specifications.

Drill Press Vice, 125mm Jaws
Drill Press Vice, 125mm Jaws

Skylarc Ref L119031

Expected Auction End Time: 6th September 2020 9:06pm

Drill Press Vice, 125mm Jaws.
Made in Poland.
Model No. PIMa-M125.
Manufacturer unknown.
135mm wide Jaws that open up to approx 105mm.
Includss removable crank handle.
Mounting slots spaced approx 125mm apart width, and 320mm apart lengthwise on centre.
Condition - Moderate surface grime and use marks.

Drill Press Vice, 100mm Jaws
Drill Press Vice, 100mm Jaws

Skylarc Ref K119030

Expected Auction End Time: 7th September 2020 6:32pm

Drill Press Vice, 100mm Jaws.
Unknown manufacturer.
100mm wide Jaws.
Opens up to approx 82mm.
Mounting slots approx 125mm apart on centre.
Condition - Shows moderate surface grime and use.

Drill Press Vice, 86mm Jaws
Drill Press Vice, 86mm Jaws

Skylarc Ref J119029

Expected Auction End Time: 6th September 2020 9:45pm

Drill Press Vice, 86mm Jaws.
Unknown manufacturer.
Jaw width 86mm.
Opens up to approx 90mm.
Can be adjusted to the vertical position.
Mounting slots spaced approx 200mm apart on centre.
Condition - Shows moderate surface grime and wear.

Sterlite 3 Drawer Parts Case
Sterlite 3 Drawer Parts Case

Skylarc Ref H119027

Expected Auction End Time: 7th September 2020 9:51pm

Sterlite 3 Drawer Parts Case.
Plastic Material.
3 Drawers.
Comes with various air hose fittings (Straight, T and L Joints) and various small die grinder pieces.

RECORD Tachometer / Mechanical Revolution Counter
RECORD Tachometer / Mechanical Revolution Counter

Skylarc Ref G119026

Expected Auction End Time: 6th September 2020 7:04pm

RECORD Tachometer/Mechanical Revolution Counter.

Assorted Sheets of Industrial Metal Shims
Assorted Sheets of Industrial Metal Shims

Skylarc Ref D119023

Expected Auction End Time: 7th September 2020 7:42pm

Assorted Sheets of Industrial Metal Shims.
Assorted Thicknesses, most are unmarked. Marked sheets range from 0.025mm up to 0.305mm.
Sheet size is approx 450x150mm.
Conditiion - Some sheets are bent, some have been cut.

Allen Bradley GuardShield 450L-B Industrial Equipment Safety Light Curtain Set
Allen Bradley GuardShield 450L-B Industrial Equipment Safety Light Curtain Set

Skylarc Ref B119021

Expected Auction End Time: 6th September 2020 8:08pm

Allen Bradley GuardShield 450L-B Industrial Equipment Safety Light Curtain Set.
Both matching units are Cat No. 450L-B4HN1200YD.
Each is 1200mm in length.
Includes mounting hardware, instalation instructions, original boxes.
Condition - New never installed units.

2x cases of Assorted O-Rings
2x cases of Assorted O-Rings

Skylarc Ref Z119019

Expected Auction End Time: 7th September 2020 8:25pm

2x cases of Assorted O-rings.
Large 350x270x100mm case filled with bags of Assorted sizes of O-rings.
Smaller 270x160x45mm case of Assorted O-rings.
Condition - O-rings are unused leftover Workshop stock. Exteriors of cases show moderate wear and use from workshop storage.

AroLube 15M Air Hose Reel
AroLube 15M Air Hose Reel

Skylarc Ref X119017

Expected Auction End Time: 6th September 2020 8:41pm

AroLube 15M Air Hose Reel.
Model: ARR7115.
Wall mountable.

3x Assorted Electrical Testers
3x Assorted Electrical Testers

Skylarc Ref Y119018

Expected Auction End Time: 7th September 2020 7:58pm

3x Assorted Electrical Testers.
Includes:
- Anco model AM-932 clamp tester with red and black probes.
- Benning Duspol Combi tester.
- Beha Unitest Moskito tester.
Condition - Anco unit powers on, other two units need new batteries. All show moderate exterior wear and usage.

SANDVK Sandflex VIP 3834-Set-95 Holesaw Set
SANDVK Sandflex VIP 3834-Set-95 Holesaw Set

Skylarc Ref V119015

Expected Auction End Time: 6th September 2020 6:36pm

SANDVK Sandflex VIP 3834-Set-95 Holesaw Set.
Drill pieces: 1130 and 11152.
Circular Saw Blades: 16, 19, 22, 29, 35, 44, 52, 57 and 64mm.
Seems to be missing hex key, unsure if any other parts missing.

4x Assorted Hand Operated Grease Dispensers
4x Assorted Hand Operated Grease Dispensers

Skylarc Ref Q119010

Expected Auction End Time: 7th September 2020 7:43pm

4x Assorted Hand Operated Grease Dispensers.
Unknown what fluid types are in each unit.
Condition varies with each unit.

Assorted End Mill Cutters by Iscar
Assorted End Mill Cutters by Iscar

Skylarc Ref P119009

Expected Auction End Time: 6th September 2020 7:34pm

Assorted End Mill Cutters by Iscar.
16x total units in a variety of cuttings types, see photos.
Condition - Varies with each unit, some appear unused while others show varying levels of use. Unknown if type number marked on boxes is what is in each case.

6x Assorted Milling Indexable Mill Cutters
6x Assorted Milling Indexable Mill Cutters

Skylarc Ref O119008

Expected Auction End Time: 7th September 2020 7:14pm

6x Assorted Milling Indexable Mill Cutters.
Five units have worn off ID labels so Unknown brand and model for each.
Sixth unit is an Iscar Heli2000 E90A-D20-3-C20-C.
Condition varies with each unit.

8x Assorted Milling End Mill Bits
8x Assorted Milling End Mill Bits

Skylarc Ref N119007

Expected Auction End Time: 6th September 2020 8:22pm

8x Assorted Milling End Mill Bits.
Sizes vary up to 22mm.
Condition varies with each unit.

2 x Steel Parallels
2 x Steel Parallels

Skylarc Ref U119014

Expected Auction End Time: 7th September 2020 9:34pm

2 x Steel Parallels.
See dimensions in last photo.

3x Diamond Bore Finishing Tools BF13218
3x Diamond Bore Finishing Tools BF13218

Skylarc Ref M119006

Expected Auction End Time: 6th September 2020 7:38pm

3x Diamond Bore Finishing Tools
All units are Part No. BF13218, 0.3500" x 3.0" 200/230 DBFT.
Condition - Unsure if units have been used or not. Cases show storage wear.

3 x Steel Parallels
3 x Steel Parallels

Skylarc Ref T119013

Expected Auction End Time: 7th September 2020 9:15pm

3 x Steel Parallels.
Each Roughly: 196mm x 38mm x 68mm.

Assorted Lot of Milling End Mill Bits & More
Assorted Lot of Milling End Mill Bits & More

Skylarc Ref L119005

Expected Auction End Time: 6th September 2020 7:23pm

Assorted Lot of Milling End Mill Bits & More.
Assorted types and sizes up to 15mm.
Rough estimate of around 50+ loose units.
Includes assorted other components within the cases, see photos.
Condition varies with each unit, a few are as new in cases, most are loose without cases showing varying levels of usage.

80+ Assorted Milling End Mills & Taping Bits
80+ Assorted Milling End Mills & Taping Bits

Skylarc Ref K119004

Expected Auction End Time: 7th September 2020 7:09pm

80+ Assorted Milling End Mills & Taping Bits.
Brands include Kennametal, Dormer, Somta, TG, Iscar and more.
Assorted sizes from 2mm to 16mm.
Assorted end mill types.
Includes Assorted tap bits.
Condition - Varies with each unit. Some are new unused while others show varying levels of usage.

18x Assorted Small Milling End Mills by JJ Tools
18x Assorted Small Milling End Mills by JJ Tools

Skylarc Ref J119003

Expected Auction End Time: 6th September 2020 7:50pm

18x Assorted Small Milling End Mills by JJ Tools.
Includes the following part numbers:
- 2x 8XR1X16X70L
- 1x 1RX2X6X45L.
- 5x 2.5XR0.2X2.5X10X50L.
- 3x 2XR0.2X2X6X45L.
- 3x 4XR0.5X4X13X55L.
- 4x 0.4RX0.8X2X45L.
Condition - All units are new and sealed in cases.

Press plates and Parallels
Press plates and Parallels

Skylarc Ref S119012

Expected Auction End Time: 7th September 2020 8:05pm

Press plates and Parallels
1 x 180mm x 160mm x 20mm press plate.
1 x 250mm x 200mm x 23mm press plate.
2 x 295mm x 22mm x 22mm parallels.

7x Iscar Milling Cutter Bits
7x Iscar Milling Cutter Bits

Skylarc Ref I119002

Expected Auction End Time: 6th September 2020 8:01pm

7x Iscar Milling Cutter Bits.
Includes the following:
- 4x EC080B20-4C08R0.8L63 *903.
- 3x EC100B22. 4C10R0. 8L72 *903.
Condition - One unit is marked as used (very light use marks). Other units appear as new.

Set of 6 Assorted Parallels
Set of 6 Assorted Parallels

Skylarc Ref R119011

Expected Auction End Time: 7th September 2020 8:17pm

Set of 6 Assorted Parallels.
1x 200mm x 99mm x 20mm.
1x 203mm x 99mm x 20mm.
1x 103mm x 71mm x 19mm. Includes 2 10mm threaded bedding holes.
1x 101mm x 71mm x 19mm. Includes 2 10mm threaded bedding holes.
1x 78mm x 55mm x 22mm. Includes bedding holes.
1x 75mm x 48mm x 20mm.Includes 2 bedding holes.

9x Partial Sets of Milling Index Units
9x Partial Sets of Milling Index Units

Skylarc Ref H119001

Expected Auction End Time: 6th September 2020 7:30pm

9x Partial Sets of Milling Index Units.
Includes:
- 10x Sandvik R390-11 T3 20E-PM 1030.
- 9x Sandvik R390-11 13 08M-PM 1025.
- 5x Sandvik R245-12 T3 E-PL 1025.
- 8x Sandvik R235-12 T3 E-PL 530.
- 3x Iscar APKT 1003PDR HM90 IC928.
- 4x Iscar APKT 100312TR-RM IC328.
- 19x Iscar XNUW 1003-06 IC28.
- 3x GotoMill 24S.
Condition - Varies with each unit, some appear unused while others show varying levels of usage.

V-Block Milling Set
V-Block Milling Set

Skylarc Ref G119000

Expected Auction End Time: 7th September 2020 7:30pm

V-Block Milling Set.
Unknown manufacturer.
Both V-Blocks are approx 92x56x56mm.
Includes 7x other accessories, see photos for details.

Iscar Lathe Tool Holder SXCNN 1212 K10-06
Iscar Lathe Tool Holder SXCNN 1212 K10-06

Skylarc Ref L119551

Expected Auction End Time: 6th September 2020 6:58pm

Iscar Lathe Tool Holder SXCNN 1212 K10-06.
Unit shows light use, see photos.

Iscar Lathe Tool Holder SXCNN 1616 K13-05
Iscar Lathe Tool Holder SXCNN 1616 K13-05

Skylarc Ref K119550

Expected Auction End Time: 7th September 2020 9:29pm

Iscar Lathe Tool Holder SXCNN 1616 K13-05.
Item appears as new, unused.

Assorted Lot of Drill Bits
Assorted Lot of Drill Bits

Skylarc Ref J119549

Expected Auction End Time: 6th September 2020 7:59pm

Assorted Lot of Drill Bits.
Partial Evacut and Dormer branded steel case sets.
Approx 50+ Assorted loose drill bits in various sizes from 3mm to 12mm.
Condition varies with each unit, some appear unused while others show varying usage.

2x Matched Parallels
2x Matched Parallels

Skylarc Ref H119521

Expected Auction End Time: 7th September 2020 8:13pm

2x Matched Parallels
With 2x 12mm threaded bed mounting holes on each.
See photos for dimensions.
Dimensions below are combined.

Manual Operated Small Metal Shear
Manual Operated Small Metal Shear

Skylarc Ref G119520

Expected Auction End Time: 6th September 2020 7:44pm

Manual Operated Small Metal Shear.
Signode Corp. Chicago ILL USA. Gerrard Model P3576A.
Small hand operated metal shear.
Blade length: 65mm.

4x 135mm to 245mm G Clamps.
4x 135mm to 245mm G Clamps.

Skylarc Ref F119519

Expected Auction End Time: 7th September 2020 9:44pm

4x 135mm to 245mm G Clamps.
Unit inner gaps: 1x 135mm, 2x 140mm, 1 x 145mm.
Unknown manufacturer.
All show typical moderate workshop wear.

Wirecut Angle Block
Wirecut Angle Block

Skylarc Ref E119518

Expected Auction End Time: 6th September 2020 7:55pm

Wirecut Angle Block.

2x 20m Workshop Air Hoses
2x 20m Workshop Air Hoses

Skylarc Ref I119548

Expected Auction End Time: 7th September 2020 9:14pm

2x 20m Workshop Air Hoses.
Unknown brand.
Model No. HALF1020A.
20m length, ID x OD: 10mm x 16mm.
Working pressure 200psi.
Blue colour.
Condition - One hose is new unused still in manufacturer plastic wrapping, second hose shows light usage.

2x Precision Industrial Triangle Units, 45 and 30/60 Degree Varieties
2x Precision Industrial Triangle Units, 45 and 30/60 Degree Varieties

Skylarc Ref H119547

Expected Auction End Time: 6th September 2020 6:28pm

2x Sets of Double Leg Lifting Chains.
Cases labeled Industrial Tooling Ltd.
Includes 1x 45 Degree unit approx 75x75mm in size.
Includes 1x 30/60 Degree unit approx 86x50mm in size.
Both include a plastic case.

2x Sets of Double Leg Lifting Chains
2x Sets of Double Leg Lifting Chains

Skylarc Ref G119546

Expected Auction End Time: 7th September 2020 6:02pm

2x Sets of Double Leg Lifting Chains.
One unit has approx 450mm long chains with 1500kg single leg capacity and up to 2550kg double leg capacity.
Second unit has approx 300mm long chains with 1600kg single leg capacity and up to 2720kg double leg capacity.
Both units have certification expiry dates of 3/2021.

Go-No Go Gauge Kit
Go-No Go Gauge Kit

Skylarc Ref C119516

Expected Auction End Time: 6th September 2020 8:15pm

Go-No Go Gauge Kit.
S.G Prittie.
AG127733.

4-Leg Lifting Chain
4-Leg Lifting Chain

Skylarc Ref F119545

Expected Auction End Time: 7th September 2020 8:26pm

4-Leg Lifting Chain.
Single leg - 1600kg capacity.
Multi leg capacity up to 2720kg.
2x chains are approx 390mm in length, other 2x chains are approx 190mm in length.
Certification expiry date 3/2021.

Milling Tool Holder 40 ER32X50
Milling Tool Holder 40 ER32X50

Skylarc Ref E119544

Expected Auction End Time: 6th September 2020 7:48pm

Milling Tool Holder 40 ER32X50.
Unknown manufacturer.

S.G. Prittie Go-No Go Guages
S.G. Prittie Go-No Go Guages

Skylarc Ref B119515

Expected Auction End Time: 7th September 2020 8:52pm

S.G. Prittie Go-No Go Guages.
AG127733.
1 x 72.
1 x 99.

Pacific Series 2 Chain Block, 1/2 Ton
Pacific Series 2 Chain Block, 1/2 Ton

Skylarc Ref D119543

Expected Auction End Time: 6th September 2020 7:00pm

Pacific Series 2 Chain Block.
1/2 Ton capacity.
Chain length approx 3m.
Unit shows surface grime and wear.

ABV Photo Tachometer
ABV Photo Tachometer

Skylarc Ref C119542

Expected Auction End Time: 7th September 2020 10:00pm

ABV Photo Tachometer.
Model No. 70934.
Includes operation manual and case.
Use 4x AA batteries (not included).

Kojex Z-Zero Setter Z-50
Kojex Z-Zero Setter Z-50

Skylarc Ref A119540

Expected Auction End Time: 7th September 2020 7:07pm

Kojex Z-Zero Setter Z-50.
Includes wood case.
Unit is operating but could use a calibration, see photo.

Vertex Touch Point Sensor VPS-20
Vertex Touch Point Sensor VPS-20

Skylarc Ref A119514

Expected Auction End Time: 6th September 2020 6:50pm

Vertex Touch Point Sensor.
Model No. VPS-20.
Uses 2x UM5 type batteries (not included).
Includes wood case.
Unit shows few minor signs of use. Unable to test as no batteries of required type available.